WiFi connecting issue - OnePlus 3T Questions & Answers

hello all.,
i am using 4.1.3 OS on oneplus 3T, i have a issue with my wi-fi connectivity, pls help me with tht..
even whn wifi is connected to the network , it dosesnt load anything.
it says connected too.,
did a network settings reset & deleting cache from recovery ., but nothing helps me..
waiting for ur positive replies , to solve this..

try flashing custom kernel on your device if your device is unlocked?

Arrowblue said:
try flashing custom kernel on your device if your device is unlocked?
Click to expand...
Click to collapse
for a reason, y i need to flash..,

I would recommend you to first check for updated firmware in your router/AP. It's probably IPv6 related as discussed in some earlier threads about wifi problems.

durgraj17 said:
for a reason, y i need to flash..,
Click to expand...
Click to collapse
To check if Stock kernel is the one giving issues? you can flash any kernel even stock one to try if your problem is solved, If not than you have to start clean with stock rom and so on, Flashing the hole rom is a bit more work than just flashing a stock kernel or any custom made one.
---------- Post added at 01:03 PM ---------- Previous post was at 01:01 PM ----------
pitrus- said:
I would recommend you to first check for updated firmware in your router/AP. It's probably IPv6 related as discussed in some earlier threads about wifi problems.
Click to expand...
Click to collapse
If it was his router than he should have also problems with his other devices too tho? Just guessing here, When i had a problem with my Router every other device in my home the same issue, than i update my router and every thing works fine now.

---------- Post added at 01:03 PM ---------- Previous post was at 01:01 PM ----------
[/COLOR]
If it was his router than he should have also problems with his other devices too tho? Just guessing here, When i had a problem with my Router every other device in my home the same issue, than i update my router and every thing works fine now.[/QUOTE]
Usually yes, unless like I said it's related to the IPv6 bugs this phone has experienced with certain routes. Your other devices probably doesn't have a buggy IPv6 implementation and therefore doesn't experience this. If you have an option for disabling this on your router, you could try it out and see if it improves.

Its working fine now.,
only sometimes gives d problem
thanks @pitrus- and @Arrowblue ., for ur valuable time..

durgraj17 said:
Its working fine now.,
only sometimes gives d problem
thanks @pitrus- and @Arrowblue ., for ur valuable time..
Click to expand...
Click to collapse
No problem, If the problem comes again try stock kernel or start with a frech and clean install.I have 3 one plus 3t and none of them has this issue.

Related

[Q] About CM7.2-RC1 by mebitek

Hi guys!
I have some questions about mebitek's CM 7.2-RC1 build.
-Is the Task Manager application really not included in this ROM?
-Are you guys also having some issues wherein some sound distortion will occur while playing music through a headset using the stock music player application?
-I noticed that whenever I reboot my phone, my OpenVPN Settings application will always force close and the only way to fix it is by restoring its Data through Titanium Backup. Are you guys also experiencing this?
Those issues are really at a minimal level and so far, Im liking this CM 7.2 build (I've been using this for a week now.)
I hope someone can answer my questions.
Thanks in advance!
xxxraymond said:
Hi guys!
I have some questions about mebitek's CM 7.2-RC1 build.
-Is the Task Manager application really not included in this ROM?
-Are you guys also having some issues wherein some sound distortion will occur while playing music through a headset using the stock music player application?
-I noticed that whenever I reboot my phone, my OpenVPN Settings application will always force close and the only way to fix it is by restoring its Data through Titanium Backup. Are you guys also experiencing this?
Those issues are really at a minimal level and so far, Im liking this CM 7.2 build (I've been using this for a week now.)
I hope someone can answer my questions.
Thanks in advance!
Click to expand...
Click to collapse
-No but u can install it
-Nope
-DUnno
you can push stock manager in system/app , how to do that there's an existing thread about that. or use advance task manager, it has a feature that can automate the clearing of ram when everytime your screens turna off.
- i think most of all of cm7 has that distorting sound. i also use this rom, im using player pro without the dsp pack feature of this music player. tip, lower the bass or dont touch it from the equilizer. and disable the bass boost in the rom's dsp setting.
- i dont have any force closes encountered since i use this rom.
rexidi said:
you can push stock manager in system/app , how to do that there's an existing thread about that. or use advance task manager, it has a feature that can automate the clearing of ram when everytime your screens turna off.
- i think most of all of cm7 has that distorting sound. i also use this rom, im using player pro without the dsp pack feature of this music player. tip, lower the bass or dont touch it from the equilizer. and disable the bass boost in the rom's dsp setting.
- i dont have any force closes encountered since i use this rom.
Click to expand...
Click to collapse
thanks for answering my post sir i dont really need an automated task killer, i only need something i could use whenever an app starts becoming unresponsive. ill try your suggestion of pushing the stock task manager for sure
i just reflashed another cm7 rom (kittenlinux's odex cm7 revision of mebitek's rom) and i didnt encounter fc in openvpn. im gonna try this rom since i think this is an optimized version of the original rom. the only thing that i cant seem to find is the option to kill app using long press of the back button.
p.s.: i think most people here doesnt understand our reason for using openvpn on our phone since they are from a different country.
xxxraymond said:
p.s.: i think most people here doesnt understand our reason for using openvpn on our phone since they are from a different country.
Click to expand...
Click to collapse
yeah in india we dont have vpn service!
i think its related to use net free..
m i right!?
Sent from my GT-S5570 using Tapatalk 2
ronakmachhi said:
yeah in india we dont have vpn service!
i think its related to use net free..
m i right!?
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
yep thats right
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
rhonalddean said:
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
Click to expand...
Click to collapse
I also use mebitek rom.. for soft button i use button savior and this application was great.
rhonalddean said:
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
Click to expand...
Click to collapse
i haven't tried using soft buttons yet but regarding your question about adrenaline engine's compatibility with this rom, it is compatible. just make sure you use the CM version of the script
adrenaline made my phone become more snappier. just be sure to mount data and system before flashing or else it wouldnt work.
on mine, i don't flash any tweaks in this rom. i'm satisfied to the speed of this this rom, even overclocked in 604Mhz. i also removed soft botton that i flashed. sorry for my bad english.
snina said:
I also use mebitek rom.. for soft button i use button savior and this application was great.
Click to expand...
Click to collapse
before the cm7 soft button came out, i use button savior... it's much comfortable to use a single tap...
---------- Post added at 08:55 PM ---------- Previous post was at 08:49 PM ----------
xxxraymond said:
i haven't tried using soft buttons yet but regarding your question about adrenaline engine's compatibility with this rom, it is compatible. just make sure you use the CM version of the script
adrenaline made my phone become more snappier. just be sure to mount data and system before flashing or else it wouldnt work.
Click to expand...
Click to collapse
Thanks @ xxxraymond... doing a trial and error approach makes it perfect... hoping it won't hard brick my phone on frequent flashing... is there any incidence (hard brick) happened on frequent flashing?
---------- Post added at 09:03 PM ---------- Previous post was at 08:55 PM ----------
rexidi said:
on mine, i don't flash any tweaks in this rom. i'm satisfied to the speed of this this rom, even overclocked in 604Mhz. i also removed soft botton that i flashed. sorry for my bad english.
Click to expand...
Click to collapse
me as well... i just set it on 710MHz... and it's running smooth and fast... i was just thinking by using those tweaks it will improve the performance to the next step... is there anything wrong with the soft buttons?
---------- Post added at 09:12 PM ---------- Previous post was at 09:03 PM ----------
i tried a lot of ROMs with different developer... but i always end up to this ROM... Thanks to "Mebitek"... it's just that when i tried to use the SIM Toolkit it won't give me anything...when tried to check my load balance it's always shows "Please try again"... did i miss something on this ROM?...
there's nothing wrong with soft buttpn, for me i dont want to change anything in a custom rom. i want it on what it has. i dont have any issue on my sim toolkit, it' s working perfectly.
rhonalddean said:
before the cm7 soft button came out, i use button savior... it's much comfortable to use a single tap...
---------- Post added at 08:55 PM ---------- Previous post was at 08:49 PM ----------
Thanks @ xxxraymond... doing a trial and error approach makes it perfect... hoping it won't hard brick my phone on frequent flashing... is there any incidence (hard brick) happened on frequent flashing?
---------- Post added at 09:03 PM ---------- Previous post was at 08:55 PM ----------
me as well... i just set it on 710MHz... and it's running smooth and fast... i was just thinking by using those tweaks it will improve the performance to the next step... is there anything wrong with the soft buttons?
---------- Post added at 09:12 PM ---------- Previous post was at 09:03 PM ----------
i tried a lot of ROMs with different developer... but i always end up to this ROM... Thanks to "Mebitek"... it's just that when i tried to use the SIM Toolkit it won't give me anything...when tried to check my load balance it's always shows "Please try again"... did i miss something on this ROM?...
Click to expand...
Click to collapse
so far i haven't experienced any problems with flashing yet though i've already flashed multiple roms in the past on this phone.
just a tip, if you are going to flash a stock rom via odin, be sure to use the one without a bootloader included (you can find it on the development section). its safe since it will not mess around your phone's boot partition (which causes hard bricks)
and if you are going to flash a rom via CWM Recovery, be sure to flash while your battery is still strong. make sure that you are not going to run out of battery in the middle of flashing or else, it may cause trouble
Thanks for the advise @ xxxraymond... i did try to flash a stock Rom from this location "yagyagaire.blogspot.com/2012/01/official-samsung-firmwares" and it seems to have no problem flashing it. can you tell me what the "bootloader" means? and why it should not be included in the Stock Rom? another thing... is there any Stock Rom Gingerbread 2.3.6 for "S5570DXKPD" baseband? i tried to use "JVKT1" working fine for me.. but it's not for Asian Rom...
---------- Post added at 10:03 AM ---------- Previous post was at 09:53 AM ----------
rexidi said:
there's nothing wrong with soft buttpn, for me i dont want to change anything in a custom rom. i want it on what it has. i dont have any issue on my sim toolkit, it' s working perfectly.
Click to expand...
Click to collapse
Can you tell me what stock Rom are you using and where can i download it? You're right... if stock Rom Sim toolkit is working fine... but if i'm using a custom rom, it's not working... beside from those custom rom developed from stock rom (Like "Emanon Rom")...
---------- Post added at 10:23 AM ---------- Previous post was at 10:03 AM ----------
Is there anyone can tell me what Custom Rom Gingerbread 2.3.6 is better for my baseband "S5570DXKPD" which is a Gingerbread 2.3.4 for Asian Rom... I did tried this "JVKT1" but the baseband (S5570XWKT2) appear with it is not for Asian Rom... Any help...
rhonalddean said:
Thanks for the advise @ xxxraymond... i did try to flash a stock Rom from this location "yagyagaire.blogspot.com/2012/01/official-samsung-firmwares" and it seems to have no problem flashing it. can you tell me what the "bootloader" means? and why it should not be included in the Stock Rom? another thing... is there any Stock Rom Gingerbread 2.3.6 for "S5570DXKPD" baseband? i tried to use "JVKT1" working fine for me.. but it's not for Asian Rom...
---------- Post added at 10:03 AM ---------- Previous post was at 09:53 AM ----------
Can you tell me what stock Rom are you using and where can i download it? You're right... if stock Rom Sim toolkit is working fine... but if i'm using a custom rom, it's not working... beside from those custom rom developed from stock rom (Like "Emanon Rom")...
---------- Post added at 10:23 AM ---------- Previous post was at 10:03 AM ----------
Is there anyone can tell me what Custom Rom Gingerbread 2.3.6 is better for my baseband "S5570DXKPD" which is a Gingerbread 2.3.4 for Asian Rom... I did tried this "JVKT1" but the baseband (S5570XWKT2) appear with it is not for Asian Rom... Any help...
Click to expand...
Click to collapse
im simple terms, the bootloader is the part of your phone which has the files/codes needed to startup you phone during boot. so if your phone's boot loader gets corrupted, it will result to what most people call a hard brick.
you can find the stock roms which has the bootloaders removed here http://forum.xda-developers.com/showthread.php?t=1551586
fyi: those stock roms can only be flashed via odin and is only applicable when going back to stock rom or when flashing a custom rom which requires you to have a clean/fresh stock rom first
i hope this helps
Thanks for the info @ xxxraymond... can i use this ROM even if my baseband is already in S5570DXKPD?...
- Dont have Task Manager.
- No
- No....
rhonalddean said:
Thanks for the info @ xxxraymond... can i use this ROM even if my baseband is already in S5570DXKPD?...
Click to expand...
Click to collapse
it should work as long as you are in gingerbread. although some devs recommend that you use 2.3.6 as base.
be sure to read the devs instructions before flashing and always create a nandroid backup using cwm recovery before doing it. trust me it can save you from a soft brick just in case something goes wrong
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
---------- Post added at 01:29 PM ---------- Previous post was at 01:22 PM ----------
rhonalddean said:
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
Click to expand...
Click to collapse
Sometimes the signal indicator get stuck... the signal still showed up even though you're out of the wifi range. until you do manual scan...
rhonalddean said:
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
---------- Post added at 01:29 PM ---------- Previous post was at 01:22 PM ----------
Sometimes the signal indicator get stuck... the signal still showed up even though you're out of the wifi range. until you do manual scan...
Click to expand...
Click to collapse
This is normal on most cm7 rom as I know it. When out of range it will show 1 or 2 bar but after a few second it will dissapear.
Sent from my GT-S5570 using Tapatalk 2

Strange problem

since today morning when switch on mobile data, my phone rebooting until switch off
when using wifi no issue
The most strange is when the phone is on charge(usb) the mobile data works very well just fine
I'm on gdx with nAa kernel
have disable all mods,make full wipe and reflashed the kennel and the problem exist
I'ts hardware problem?
And why when the phone is on charge data works?
Haven't try yet to repair with seus
I will recommend you to flash back to stock and start afresh.
And i dont think that its a hardware problem as your mobile data works on usb charge.
thanks for your answer dagger
I will try this tomorrow,can't today
The last I must do today is to wipe battery stats and left in charge all night and see tomorrow if the problem stays
its hardware problem
I must disable it and clean the mobo
Why dont you take it to sony??
Superuser_ said:
since today morning when switch on mobile data, my phone rebooting until switch off
when using wifi no issue
The most strange is when the phone is on charge(usb) the mobile data works very well just fine
I'm on gdx with nAa kernel
have disable all mods,make full wipe and reflashed the kennel and the problem exist
I'ts hardware problem?
And why when the phone is on charge data works?
Haven't try yet to repair with seus
Click to expand...
Click to collapse
it maybe the problem that affected by Crossbreeder's DNS tweaks or something you should find the way to disable it i hope
you already know it and if still the problem don't go away. use Sony PC Campanion to make your X8 to factory condition.
ONE question,can i try the crossbreeder mod in Stock Kernel i also like to try it.i am currently using latest GDX v031b STOCK
95mediatech said:
it maybe the problem that affected by Crossbreeder's DNS tweaks or something you should find the way to disable it i hope
you already know it and if still the problem don't go away. use Sony PC Campanion to make your X8 to factory condition.
ONE question,can i try the crossbreeder mod in Stock Kernel i also like to try it.i am currently using latest GDX v031b STOCK
Click to expand...
Click to collapse
First jimdem tweak & now crossbreeder
The rom is already tweaked by devs!
Stop tweaking it too much!
That's why it's best!!!!!
see boot animation without rebooting
Gogeta said:
First jimdem tweak & now crossbreeder
The rom is already tweaked by devs!
Stop tweaking it too much!
That's why it's best!!!!!
see boot animation without rebooting
Click to expand...
Click to collapse
ok,let me do that fresh,if i can use that crossbreeder tweak in my stock x8 i will sacrifice my time to
hard factory reset my X8 wit PCC and do a fresh installation
dagger said:
Why dont you take it to sony??
Click to expand...
Click to collapse
because the phone is 2 years and 2 month old so the warranty have expired
if need to change motherboard the price will be about 50-60€
the new one has 90-100€
95mediatech said:
it maybe the problem that affected by Crossbreeder's DNS tweaks or something you should find the way to disable it i hope
you already know it and if still the problem don't go away. use Sony PC Campanion to make your X8 to factory condition.
ONE question,can i try the crossbreeder mod in Stock Kernel i also like to try it.i am currently using latest GDX v031b STOCK
Click to expand...
Click to collapse
Yes had restore with seus and still have problem
So it's hardware problem
The phone work well on other functions only the mobile data without charger when switch on,the phone rebooting until switch off
As I said in first post is strange when in the charger all work well like before
Yes I think you can use crossbreeder
Hey SU..
This might be guessin' but you don't undervolt do you?
---------- Post added at 04:23 PM ---------- Previous post was at 04:20 PM ----------
@Gogeta
Crossbreeder works very well.. You can't try it so don't reply to anyone asking about it as you know absolutely nothing about it.
Posting for the sake of posting is not being helpful.
Don't try it on stock - it won't work.
No never and never overlooked
its not from cpu clock because in clean install all clock values revert back to normal
I have a suspicion,i think its the battery because when is on charger the data works without reboot
I must find an other battery to test
Finally!!
I found the what causing the reboots!
Just borrow the new x8 of my Nephew,put his battery to my phone and mobile data working without in charge!!!
My battery is near to death need to buy a new one
So guys if ever have the same issue with mine,for the history, it is the battery that causes reboot issues
Thanks all of you for the replies
And most of all,CtrlAltDelIrl because make me think like this-->undervolt-->volt-->energy-->battery
Welcome. That uncomplicated energy material causing many of the most problem of the phone. Lol
Sent from my X8 using xda app-developers app
---------- Post added at 08:35 PM ---------- Previous post was at 08:31 PM ----------
CtrlAltDelIrl said:
Hey SU..
This might be guessin' but you don't undervolt do you?
---------- Post added at 04:23 PM ---------- Previous post was at 04:20 PM ----------
@Gogeta
Crossbreeder works very well.. You can't try it so don't reply to anyone asking about it as you know absolutely nothing about it.
Posting for the sake of posting is not being helpful.
Don't try it on stock - it won't work.
Click to expand...
Click to collapse
So crossbreeder will not work on stock kernel???
Sent from my X8 using xda app-developers app
Hello Guys,
I am also facing same problem since 2 days and as i saw this thread exaclty same symptoms with my x8 also. But this solution doesn't worked for me i tried with the other x8 battery of my friend as well. but no use stil X8 is rebooting if its Mobile Data is ON, not charging. And one strange symptom is phone never power off. If i choose power off option even also it will reboot. i tried restoring factory setting, even with PC companian restored my mobile to stock condition. and in the stock rom also it doesn't power off.
Any help is hugely approciated..
Thanks
mine was the battery
Have buy a new one original (8.50€) now and working as a new..
Maybe you have a motherboard hardware problem
If you are in warranty,restore with official rom and sent the phone to Sony repair store
mujahidkhan999 said:
Hello Guys,
I am also facing same problem since 2 days and as i saw this thread exaclty same symptoms with my x8 also. But this solution doesn't worked for me i tried with the other x8 battery of my friend as well. but no use stil X8 is rebooting if its Mobile Data is ON, not charging. And one strange symptom is phone never power off. If i choose power off option even also it will reboot. i tried restoring factory setting, even with PC companian restored my mobile to stock condition. and in the stock rom also it doesn't power off.
Any help is hugely approciated..
Thanks
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=39547719#post39547719
I have tried those step & successfully for almost 2 days without random reboot but now the problem come back again, please tell me if you success using this way.
Now I will try to replace my battery first as Superuser's advice.
Odp: Strange problem
Gogeta said:
First jimdem tweak & now crossbreeder
The rom is already tweaked by devs!
Stop tweaking it too much!
That's why it's best!!!!!
see boot animation without rebooting
Click to expand...
Click to collapse
We use no tweaks
eagleeyetom said:
We use no tweaks
Click to expand...
Click to collapse
Well... At least for the stock kernel version, GingerDX has this: http://forum.xda-developers.com/showthread.php?t=1621808 .

[Q&A] CM 10.1 Improved 07/07 build

Q&A for CM 10.1 Improved 07/07 build
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
google maps glitches
hello, i've just installed cyanogenmod 10.1-20140916 on my galaxy mini 2
the problem is that google maps has serious glitches and flickering ... don't know how to solve this problem ... please help!
davidato2 said:
hello, i've just installed cyanogenmod 10.1-20140916 on my galaxy mini 2
the problem is that google maps has serious glitches and flickering ... don't know how to solve this problem ... please help!
Click to expand...
Click to collapse
This is a known problem. I cannot do something about it. You can instead look for google maps 6.14.5 apk. It works fine and it is way faster for our phone (IMO at least..). You can use google to find the apk
Changed launcher from default to NOVA and this SOLVED the problem.
Hope will be useful for others
3g reception
Seem like 3g reception is really poor with cyanogenmod 10.1
Have you experienced same issue?
Other Improvement ??
Hi
How about Wifi direct + add option to make external SD as primary Storage ??
Do you plan for next build ?
sorry for bad english
Questionable kernel
Hello, I'm just curious if it's really possible to build a CM11 rom with 2.x kernel? I'm not asking about possible gaming problems (because I don't use this phone for that purpose), I'm only interested in the compatibility. Thanks, for all replys.
Hi bleached
Try If You can add mod "internal sdcard mount" on it rom !
And thank you for it perfect rom
Hey, bleached!
can you add this?
forum.xda-developers.com/showthread.php?t=2754997
Are swap partition on external SD card will work with this ROM?
Differences between jena.zip and jenad.zip
Hi, I want to install this ROM on Galaxy S6500D, but I have a question about the build I have to download: I'd like to know what is the difference between the cm-10.1-xxx-UNOFFICIAL-jena and cm-10.1-xxx-UNOFFICIAL-jenad builds.
Thanks!
Tux_movil said:
Hi, I want to install this ROM on Galaxy S6500D, but I have a question about the build I have to download: I'd like to know what is the difference between the cm-10.1-xxx-UNOFFICIAL-jena and cm-10.1-xxx-UNOFFICIAL-jenad builds.
Thanks!
Click to expand...
Click to collapse
jena is for S6500 (with NFC)
jenad is for S6500D (without NFC)
So, you should choose jenad
ad664 said:
jena is for S6500 (with NFC)
jenad is for S6500D (without NFC)
So, you should choose jenad
Click to expand...
Click to collapse
Thank you very much :good:
Yesterday I had a Google Play Store upgrade and when I went to bed I was charging my phone.
Today, I was going to search an app but Play Store didn't works. It says "No connection" - with 3G or Wi-Fi. I was reflashing Gapps but nothing, same results!
Antox97 said:
Yesterday I had a Google Play Store upgrade and when I went to bed I was charging my phone.
Today, I was going to search an app but Play Store didn't works. It says "No connection" - with 3G or Wi-Fi. I was reflashing Gapps but nothing, same results!
Click to expand...
Click to collapse
Try wiping everything and reflashing. If that doesnt work flash stock back and reflash everything to normal. And if that doesnt work reply back and we will try to solve the problem.
---------- Post added at 01:25 PM ---------- Previous post was at 01:23 PM ----------
Hello bleached!
I was wondering if it was possible to compile a CM11 with the 2.6.X kernel to solve whitescreen? Or does KitKat require a newer kernel?
meganukebmp said:
Try wiping everything and reflashing. If that doesnt work flash stock back and reflash everything to normal. And if that doesnt work reply back and we will try to solve the problem.
---------- Post added at 01:25 PM ---------- Previous post was at 01:23 PM ----------
Hello bleached!
I was wondering if it was possible to compile a CM11 with the 2.6.X kernel to solve whitescreen? Or does KitKat require a newer kernel?
Click to expand...
Click to collapse
Owh yes, I have forgot to say that I have resolve this problem with a simple reflash of everything. Now I have new Google Play version!
For CM11, bleached have built an his version of CM11 but camera crashes
Antox97 said:
Owh yes, I have forgot to say that I have resolve this problem with a simple reflash of everything. Now I have new Google Play version!
For CM11, bleached have built an his version of CM11 but camera crashes
Click to expand...
Click to collapse
Where can I find this version?
I dont really need camera
meganukebmp said:
Where can I find this version?
I dont really need camera
Click to expand...
Click to collapse
Here
//
Lazarevic said:
Is there whitescreen bug ?
Click to expand...
Click to collapse
No.
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
meganukebmp said:
]Hello bleached!
I was wondering if it was possible to compile a CM11 with the 2.6.X kernel to solve whitescreen? Or does KitKat require a newer kernel?
Click to expand...
Click to collapse
I was asking same long time ago but he say that it's impossible for some questions

[Q] Custom ROM with working private mode?

Any custom roms out there with a working private mode? I've tried a few so far without any luck. Only ROM I've had luck with that had a working private mode was the odin flashed stock rom.
Just use the private mode fix on any TouchWiz rom you want.
http://forum.xda-developers.com/showthread.php?t=2922671
I'm on firekat v10 and I'm using private mode. I just flashed the private mode fix, at the same time I flashed the external SD card fix, and the volume booster mod.
oh thanks, I'll give that a try. been missing my private mode since i got off stock rom Appreciate it!
Bummers, I'm on DK 4.0 and it's not working. Maybe I'll just switch back to FK instead and use it there.
Here is the other way which works on the other roms that the first fix doesn't work on.
Should work fine on dynamic kat:
http://forum.xda-developers.com/showthread.php?t=2985441
10-K said:
Here is the other way which works on the other roms that the first fix doesn't work on.
Should work fine on dynamic kat:
http://forum.xda-developers.com/showthread.php?t=2985441
Click to expand...
Click to collapse
Yea I had tried that one at the same time, which also didn't work. :crying:
It says private mode works on their site.
I'll try flashing it, now.
http://www.dynamicrom.com/index.php/downloads/viewcategory/169-t-mobile-galaxy-note-4
---------- Post added at 04:21 PM ---------- Previous post was at 03:37 PM ----------
I had to dirty flash dk using firekat as a base to get it to work.
Yea I saw mention that it worked, but in some of his later posts it sounds like it stopped working and it'll be fixed in the next release.
so you enabled it in FK first then dirty flashed and that worked for you? I'll have to give that a try. Thanks
wow, still didn't work for me. I guess I just suck
I got it to work on FK 10 though, I guess I'll switch to that till the next DK release. Gonna miss the customizations, but oh well. Besides, I read FK + AEL works with the Gear VR anyways and I was planning to get that sooner or later, so I'd have to switch over eventually regardless.
Thanks for the suggestions though

Camera and Torch no longer work

Hey guys
So, about a month ago I flashed @Hard_Rock83 's LineageOS 15.1 on my Mi Max 2 and everything worked fine. A few weeks later, the camera just, out of nowhere, decided it does not want to work anymore. I've clean flashed the latest build of the ROM and it still doesn't work. Should I flash the stock ROM or something like that and see if it works? If so, please guide me on how to do it (unless all it takes is literally downloading the ROM and flashing it in the recovery). I doubt this is an hardware issue...
Any help is welcome
Thanks in advance
JoaoPRSousa said:
Hey guys
So, about a month ago I flashed @Hard_Rock83 's LineageOS 15.1 on my Mi Max 2 and everything worked fine. A few weeks later, the camera just, out of nowhere, decided it does not want to work anymore. I've clean flashed the latest build of the ROM and it still doesn't work. Should I flash the stock ROM or something like that and see if it works? If so, please guide me on how to do it (unless all it takes is literally downloading the ROM and flashing it in the recovery). I doubt this is an hardware issue...
Any help is welcome
Thanks in advance
Click to expand...
Click to collapse
Anyhow, did u try any other camera apps if it's working..or u are getting force close in each camera app u use?
Hard_Rock83 said:
Anyhow, did u try any other camera apps if it's working..or u are getting force close in each camera app u use?
Click to expand...
Click to collapse
I did. Open Camera gave me the same error. "Can't connect to camera"
Also, one thing that I didn't mention and that I probably should have. Since the default camera app was constantly "stopping", I got that Open Camera app and disabled the default camera app. Maybe that was what caused this? Idk
My front facing camera has also stopped working.
Tried multiple camera apps.
Have seen it mentioned a few times on the net but no easy fix found so far.
Im on stock global rom version 9.6.3.0
Hoping that the Miui 10 rom thats due this week might fix it.
If you find an answer please post back
JoaoPRSousa said:
Hey guys
So, about a month ago I flashed @Hard_Rock83 's LineageOS 15.1 on my Mi Max 2 and everything worked fine. A few weeks later, the camera just, out of nowhere, decided it does not want to work anymore. I've clean flashed the latest build of the ROM and it still doesn't work. Should I flash the stock ROM or something like that and see if it works? If so, please guide me on how to do it (unless all it takes is literally downloading the ROM and flashing it in the recovery). I doubt this is an hardware issue...
Any help is welcome
Thanks in advance
Click to expand...
Click to collapse
Yeah, it's well known that @Hard_Rock83 kernel breaks a lot of stuff, especially the camera module. Good that you mentioned that you flashed his Kernel, otherwise we wouldn't know the cause of the problem you have.
ekin_strops said:
Yeah, it's well known that @Hard_Rock83 kernel breaks a lot of stuff, especially the camera module. Good that you mentioned that you flashed his Kernel, otherwise we wouldn't know the cause of the problem you have.
Click to expand...
Click to collapse
It wasn't his kernel that broke the camera module, because after flashing it, everything worked. I guess what broke it was in fact me disabling the default camera app? Not sure...
ekin_strops said:
Yeah, it's well known that @Hard_Rock83 kernel breaks a lot of stuff, especially the camera module. Good that you mentioned that you flashed his Kernel, otherwise we wouldn't know the cause of the problem you have.
Click to expand...
Click to collapse
Its impossible my man:laugh:
JoaoPRSousa said:
It wasn't his kernel that broke the camera module, because after flashing it, everything worked. I guess what broke it was in fact me disabling the default camera app? Not sure...
Click to expand...
Click to collapse
That was a sarcasm man...
---------- Post added at 10:36 ---------- Previous post was at 10:36 ----------
Hard_Rock83 said:
Its impossible my man:laugh:
Click to expand...
Click to collapse
Well, need to make some fun, otherwise it's booring.
ekin_strops said:
That was a sarcasm man...
---------- Post added at 10:36 ---------- Previous post was at 10:36 ----------
Well, need to make some fun, otherwise it's booring.
Click to expand...
Click to collapse
Hahahaa:silly::laugh:
Did u solve the problem? Cause I am facing the same problem bro, please help

Categories

Resources