You can downgrade from ZVF and ZVE without getting hard bricked - no worries. (No guarantee for future updates higher than ZVF).
If you use this to upgrade from ZVC or lower, you cannot go back down lower than ZVD or you will get hard bricked.
File works fine in LGUP. Don't ask me how to install or use it - there's plenty of that already on the forums.
Happy flashing!
https://www.androidfilehost.com/?fid=745425885120734367
iBowToAndroid said:
You can downgrade from ZVF and ZVE without getting hard bricked - no worries. (No guarantee for future updates higher than ZVF).
If you use this to upgrade from ZVC or lower, you cannot go back down lower than ZVD or you will get hard bricked.
File works fine in LGUP. Don't ask me how to install or use it - there's plenty of that already on the forums.
Happy flashing!
https://www.androidfilehost.com/?fid=745425885120734367
Click to expand...
Click to collapse
rite on about tme whered u find that one at man.
im gettin ready to get all the g4 files together and put em all in one page rooting sim unlock tots everything i know of make a simplified place for to find.
also tots can still be flashed in old lg flash tool just have to run the old lg firmware extractor to get the dll file for flash tool.
how ive done it since the g2
TheMadScientist420 said:
rite on about tme whered u find that one at man.
im gettin ready to get all the g4 files together and put em all in one page rooting sim unlock tots everything i know of make a simplified place for to find.
also tots can still be flashed in old lg flash tool just have to run the old lg firmware extractor to get the dll file for flash tool.
how ive done it since the g2
Click to expand...
Click to collapse
But LGUP is way less work
Plus, I don't think it would give you the DLL anyways. I created the tot myself using software to pull the partitions from another phone and compile everything together
Is there a possibility of using this tot file to create a more updated MellowMallow installation? I think MellowMallow is currently based on the much older ZVB version.
KingFatty said:
Is there a possibility of using this tot file to create a more updated MellowMallow installation? I think MellowMallow is currently based on the much older ZVB version.
Click to expand...
Click to collapse
I have no idea. You'd have to talk to the ROM dev. I doubt it though.
I'm sure a flashable ROM zip could be created, but that would require a custom recovery in order to be installed.
MellowMallow is in TOT form IIRC but the problem is that there's no root method for ZVD
KingFatty said:
Is there a possibility of using this tot file to create a more updated MellowMallow installation? I think MellowMallow is currently based on the much older ZVB version.
Click to expand...
Click to collapse
since they are both mm basebands its possible for it to work not garantied though
Noob question, but what is the benefit of downgrading from ZVF/ZVE to ZVD? Will I be able to root or tether without root? Thanks.
Arsenal101 said:
Noob question, but what is the benefit of downgrading from ZVF/ZVE to ZVD? Will I be able to root or tether without root? Thanks.
Click to expand...
Click to collapse
Nothing really. There have been a few probs i guess on e or f. Which now having a compatible tot can possibly fix that. Soft brick from bad firm flashes
Where is the link for zve and zvf file
Please provide zve and zvf file,i can not find any,only zvd is available,please provide ls991zve and ls991zvf file,thanks....
SHERRIF said:
Please provide zve and zvf file,i can not find any,only zvd is available,please provide ls991zve and ls991zvf file,thanks....
Click to expand...
Click to collapse
Why do you think such files even exist? Your mention of them is the first I've heard that they would exist?
SHERRIF said:
Please provide zve and zvf file,i can not find any,only zvd is available,please provide ls991zve and ls991zvf file,thanks....
Click to expand...
Click to collapse
Please pay me $100 per file and I'll provide them. Hahaha.
Or.....
You can flash ZVD and then OTA update to ZVE and then ZVF if you want. Very easy process
Lol.
Brother this tot works for the LG G4 LS991ZVE ?? I await your reply thanks
So has anyone actually flashed this TOT to confirm it works? The structure seems different from prior TOTs and the entire extracted TOT (via WindowsLGFirmwareExtract) is smaller than even a compressed version of ZVB's system image. Either this TOT is missing too much critical data to be used for a full restore or it's incompatible with the only decompilation tools I can find. Either way, as it is, it's useless for creating custom (Mellowmallow-style) ROMs.
EDIT: Maybe the tools I was using weren't accounting properly for the different structure. I did a bit of tweaking with LGBinExtract and managed to pull out a full system.img. Still haven't actually flashed the TOT to downgrade my ZVF phone, though.
FEGuy said:
So has anyone actually flashed this TOT to confirm it works? The structure seems different from prior TOTs and the entire extracted TOT (via WindowsLGFirmwareExtract) is smaller than even a compressed version of ZVB's system image. Either this TOT is missing too much critical data to be used for a full restore or it's incompatible with the only decompilation tools I can find. Either way, as it is, it's useless for creating custom (Mellowmallow-style) ROMs.
EDIT: Maybe the tools I was using weren't accounting properly for the different structure. I did a bit of tweaking with LGBinExtract and managed to pull out a full system.img. Still haven't actually flashed the TOT to downgrade my ZVF phone, though.
Click to expand...
Click to collapse
I didnt look at the file structure. But 1.6 gb is the file size which is typical for g4 tots.
Anywhere from 1.5 to 2.5
FEGuy said:
So has anyone actually flashed this TOT to confirm it works? The structure seems different from prior TOTs and the entire extracted TOT (via WindowsLGFirmwareExtract) is smaller than even a compressed version of ZVB's system image. Either this TOT is missing too much critical data to be used for a full restore or it's incompatible with the only decompilation tools I can find. Either way, as it is, it's useless for creating custom (Mellowmallow-style) ROMs.
Click to expand...
Click to collapse
I've just flashed this rom on a LS991 with ZVE with lgup but i dont know if i am doing something wrong, when you flash a tot like this, the phone must restore to factory defaults? or when a tot is flashed the phone just do an "upgrade" ... In my case I used this tot to install from stratch a new rom, cause im stuck in the setup wizard :/
TheMadScientist420 said:
I didnt look at the file structure. But 1.6 gb is the file size which is typical for g4 tots.
Anywhere from 1.5 to 2.5
Click to expand...
Click to collapse
i am unable to extract the tot or is there a different method i tried with wirar
---------- Post added at 03:33 AM ---------- Previous post was at 03:24 AM ----------
iBowToAndroid said:
You can downgrade from ZVF and ZVE without getting hard bricked - no worries. (No guarantee for future updates higher than ZVF).
If you use this to upgrade from ZVC or lower, you cannot go back down lower than ZVD or you will get hard bricked.
File works fine in LGUP. Don't ask me how to install or use it - there's plenty of that already on the forums.
Happy flashing!
https://www.androidfilehost.com/?fid=745425885120734367
Click to expand...
Click to collapse
i downloaded twice and neither time could i get the zip to extract the tot using winrar am i missing something
gillim74 said:
i am unable to extract the tot or is there a different method i tried with wirar
---------- Post added at 03:33 AM ---------- Previous post was at 03:24 AM ----------
i downloaded twice and neither time could i get the zip to extract the tot using winrar am i missing something
Click to expand...
Click to collapse
Lg firmware extractor
gillim74 said:
i am unable to extract the tot or is there a different method i tried with wirar
---------- Post added at 03:33 AM ---------- Previous post was at 03:24 AM ----------
i downloaded twice and neither time could i get the zip to extract the tot using winrar am i missing something
Click to expand...
Click to collapse
TheMadScientist420 said:
Lg firmware extractor
Click to expand...
Click to collapse
No, not firmware extractor.
I use 7Zip for highest compression, so use that to extract
iBowToAndroid said:
No, not firmware extractor.
I use 7Zip for highest compression, so use that to extract
Click to expand...
Click to collapse
OK thank you
Related
VS910ZV9_05.S9_05.P58014.R5.tot​
how use this frimware been waiting too root it u never know jcase
Holy crap... where did you get this?
This can't be real...
I'm confused what exactly is this?
nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot​
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk
is this so we can get developers to make a custom recovery??????????
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).
how u flash this
blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.
I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!
Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.
I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first
lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps
Source: http://sbf.droid-developers.org/dinara/list.php
Thank you very much to Pzyduck and his firmware team for finding and leaking these FXZ's for the Atrix HD to us to use!
DO NOT FLASH AT&T ON BELL AND VICE-VERSA!
AT&T FXZ-> http://sbf.droid-developers.org/dinara/7.7.1Q-115_MB886_FFW-14_SIGNED_CFC.xml.zip
System Version: 77.10.16.MB886.ATT.en.US
Bell FXZ-> http://sbf.droid-developers.org/dinara/7.7.1Q-115_MB886_BELL_FFW-12_SIGNED_CFC.xml.zip
System Version: ???
You can find the 32 bit Motorola USB Drivers here:
http://rootingmydroid.com/FILESYSTE..._End_User_Driver_Installation_5.9.0_32bit.msi
And 64 bit here:
http://rootingmydroid.com/FILESYSTE..._End_User_Driver_Installation_5.9.0_64bit.msi
RSD Lite 5.7 for flashing these can be found here:
http://rootingmydroid.com/FILESYSTEM/DEVELOPMENT/UDPATES/-RSD-LITE/RSDLite57.zip
Happy flashing... make sure that you have plenty of battery life before attempting this or you are using a Motorola Factory-style cable.
mattlgroff said:
Source: http://sbf.droid-developers.org/dinara/list.php
Thank you very much to Pzyduck and his firmware team for finding and leaking these FXZ's for the Atrix HD to us to use!
AT&T FXZ-> http://sbf.droid-developers.org/dinara/7.7.1Q-115_MB886_FFW-14_SIGNED_CFC.xml.zip
System Version: 77.10.16.MB886.ATT.en.US
Bell FXZ-> http://sbf.droid-developers.org/dinara/7.7.1Q-115_MB886_BELL_FFW-12_SIGNED_CFC.xml.zip
System Version: ???
You can find the 32 bit Motorola USB Drivers here:
http://rootingmydroid.com/FILESYSTE..._End_User_Driver_Installation_5.9.0_32bit.msi
And 64 bit here:
http://rootingmydroid.com/FILESYSTE..._End_User_Driver_Installation_5.9.0_64bit.msi
RSD Lite 5.7 for flashing these can be found here:
http://rootingmydroid.com/FILESYSTEM/DEVELOPMENT/UDPATES/-RSD-LITE/RSDLite57.zip
Happy flashing... make sure that you have plenty of battery life before attempting this or you are using a Motorola Factory-style cable.
Click to expand...
Click to collapse
I am new to motorola phones. Can someone explain what this is?
A leaked update? Is this version rootable? And on that note, is an unlocked bootloader required for root?
Sent from my phone.
Markyzz said:
I am new to motorola phones. Can someone explain what this is?
A leaked update? Is this version rootable? And on that note, is an unlocked bootloader required for root?
Sent from my phone.
Click to expand...
Click to collapse
Firmware Stock/Official :good:
Thanks you matt
MIRROR: http://forum.xda-developers.com/showthread.php?p=30714649#post30714649
Markyzz said:
I am new to motorola phones. Can someone explain what this is?
A leaked update? Is this version rootable? And on that note, is an unlocked bootloader required for root?
Sent from my phone.
Click to expand...
Click to collapse
These are files that can be used to truly factory restore your phone. If you had a custom rom installed, this would put you back to stock.
You use Motorola's RSD Lite program to flash to your phone while it is in AP Fastboot mode.
This will work on locked bootloaders because they are signed files from Motorola meant for flashing in this way.
EDIT: As Pzyduck says above, these are official firmware not leaks
Don't flash AT&T on Bell or vice versa, you may get trapped because of secure versions.
(btw. I know, it's codenamed qinara, and not dinara, but meh, too lazy to fix it )
Skrilax_CZ said:
Don't flash AT&T on Bell or vice versa, you may get trapped because of secure versions.
(btw. I know, it's codenamed qinara, and not dinara, but meh, too lazy to fix it )
Click to expand...
Click to collapse
If you look inside the files themselves Motorola was too lazy to fix it too! They use both throughout lol.
Thanks to mattlgroff for posting here
---------- Post added at 04:03 AM ---------- Previous post was at 04:01 AM ----------
Pzyduck said:
Firmware Stock/Official :good:
Thanks you matt
MIRROR: http://forum.xda-developers.com/showthread.php?p=30714649#post30714649
Click to expand...
Click to collapse
Can these files be modded to allow root before they are installed on the phone?
reddog said:
Thanks to mattlgroff for posting here
---------- Post added at 04:03 AM ---------- Previous post was at 04:01 AM ----------
Can these files be modded to allow root before they are installed on the phone?
Click to expand...
Click to collapse
On 2 accounts we wouldn't be able to do this.
1) The phone will only take signed images for system in AP Fastboot. There are sig checks on flashing and on boot (we can assume this, we can test more obviously since we have FXZ backups).
I didn't want to test flashing a rooted system dd'd out before because we had no FXZ's to test. Now that we have them it might be worth it to try it out. Worst case use these FXZ.
Rooted system.img: you can get the entire partitions here which includes it: http://crackflasher.com/dev/mattlgroff/MB886.ATT.en.US/AtrixHdPartitions.zip
Be extra careful flashing things you do not have backups for...
2) The system.img.ext4 file inside of these are not only compressed, but appear to be encrypted as well.
mattlgroff said:
On 2 accounts we wouldn't be able to do this.
1) The phone will only take signed images for system in AP Fastboot. There are sig checks on flashing and on boot (we can assume this, we can test more obviously since we have FXZ backups).
I didn't want to test flashing a rooted system dd'd out before because we had no FXZ's to test. Now that we have them it might be worth it to try it out. Worst case use these FXZ.
Rooted system.img: you can get the entire partitions here which includes it: http://crackflasher.com/dev/mattlgroff/MB886.ATT.en.US/AtrixHdPartitions.zip
Be extra careful flashing things you do not have backups for...
2) The system.img.ext4 file inside of these are not only compressed, but appear to be encrypted as well.
Click to expand...
Click to collapse
Any luck flashing this yet?
popfan said:
Any luck flashing this yet?
Click to expand...
Click to collapse
No one's tried to my knowledge, also the system.img.ext4 is not encrypted, but its compression methods are unknown.
mattlgroff said:
No one's tried to my knowledge, also the system.img.ext4 is not encrypted, but its compression methods are unknown.
Click to expand...
Click to collapse
i tried but nothing. only error when installing
There is a new firmware listed as MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml.zip has anyone tried to to flash this yet? Is this 4.1.1 OTA that we have now? I need to know because like an idiot I tried to flash back to 4.0.4 from 4.1.1 and now it fastboots on every reboot. Super annoying. Anyway I need to flash to 4.1.1 to fix this apparently.
Tried it says unknown command flash failed unknown flash boot command so u can try but no good phone still OK so I got lucky
Sent from my MB886 using xda app-developers app
I NEED A NEW vs98012b kdz file the one i got has an issue cause it wont let me flash it again ive searched every where and only found this one file or even an 11a kdz file PLEASE
deathsquad737 said:
I NEED A NEW vs98012b kdz file the one i got has an issue cause it wont let me flash it again ive searched every where and only found this one file or even an 11a kdz file PLEASE
Click to expand...
Click to collapse
Look in "General" and look for a post "Return to Stock"
As a polite reminder, you should never flash a rom if you can not get back to stock easily.
file
Jimi Mack said:
Look in "General" and look for a post "Return to Stock"
As a polite reminder, you should never flash a rom if you can not get back to stock easily.
Click to expand...
Click to collapse
Thats where i found the kdz file i got now im trying to locate a new one or a different software version other than 12b thank u though
deathsquad737 said:
Thats where i found the kdz file i got now im trying to locate a new one or a different software version other than 12b thank u though
Click to expand...
Click to collapse
If you are looking to go back to ICS why are you looking for something other than 12b?
deathsquad737 said:
Thats where i found the kdz file i got now im trying to locate a new one or a different software version other than 12b thank u though
Click to expand...
Click to collapse
In the Verizon-specific go back to stock thread, he's got 10b and 11a tot files linked. Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2448960
12b
Jimi Mack said:
If you are looking to go back to ICS why are you looking for something other than 12b?
Click to expand...
Click to collapse
Isnt 4.2.2 jelly bean cause that is what the 12b kdz is 4.2.2!
tot
jesssiii said:
In the Verizon-specific go back to stock thread, he's got 10b and 11a tot files linked. Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2448960
Click to expand...
Click to collapse
I dont know the tot method never worked for me i cant even add a tot file in the flash tool it wont go on there i push add select my file and it isnt tgere wierd?anyway i went from stock kk to stock jellybean lastnight so. Im reay for my replacement phone tomorrow.
Tot method definitely works, but you must read the op in that thread and follow the instructions.
Sent from my LG-VS980
deathsquad737 said:
I dont know the tot method never worked for me i cant even add a tot file in the flash tool it wont go on there i push add select my file and it isnt tgere wierd?anyway i went from stock kk to stock jellybean lastnight so. Im reay for my replacement phone tomorrow.
Click to expand...
Click to collapse
Why would you need to downgrade from stock KK to JB to replace your phone?
downgrade
mjones73 said:
Why would you need to downgrade from stock KK to JB to replace your phone?
Click to expand...
Click to collapse
I didnt i just had to know why that file ran once and wouldn't run again so i messed with my desktop until i figured it out!GO TERPS LOL!
tot
jesssiii said:
Tot method definitely works, but you must read the op in that thread and follow the instructions.
Sent from my LG-VS980
Click to expand...
Click to collapse
i defiantlyfollowed the op step by step but it wont let me add the tot file i guess i can delete all files and reboot my ccomputer then take another crack at it but thats a later date!
Don't post questions in Development, thread moved to Q&A
ZVD Debrick image check post 2.............
make sure to give thanx to iBowToAndroid thanx for getting us a zvd .tot so i could make this
https://forum.xda-developers.com/member.php?u=3163377
here is the whole debrick images in .mbn formats for qfil for hard brick restore.
zvd users
Debrick zip
https://drive.google.com/open?id=0BxacnHqAaZbKTHE0N29tSFdTV2M
qpst
https://drive.google.com/open?id=0BxacnHqAaZbKWE9BSkNnOFlBdlE
So now if ure on ZVD hard bricked 9008 mode. Here is your hope of fix.
Seeing as another user says we can downgrade ZVF to E or D to ZVD. This may and should work to fix ZVF E and D hard bricks again with qpst using qfil..
I dont know exact instrucs never had to use qfil. Always used board diag on g3 and g2 Which if u dont know is how to extract .mbn files from current .tots
TheMadScientist420 said:
here is the whole debrick images in .mbn formats for qfil for hard brick restore.
zvd users
Debrick zip
https://drive.google.com/open?id=0BxacnHqAaZbKTHE0N29tSFdTV2M
qpst
https://drive.google.com/open?id=0BxacnHqAaZbKWE9BSkNnOFlBdlE
Click to expand...
Click to collapse
These files are useless in qfil without firehose.mbn and a couple of extra xml files.
l33tlinuxh4x0r said:
These files are useless in qfil without firehose.mbn and a couple of extra xml files.
Click to expand...
Click to collapse
So i guess the next queation is how do we get or make theze files needed then
TheMadScientist420 said:
So i guess the next queation is how do we get or make theze files needed then
Click to expand...
Click to collapse
Exactly and the only tutorial that I can find is an outdated txt file that no longer works.
l33tlinuxh4x0r said:
Exactly and the only tutorial that I can find is an outdated txt file that no longer works.
Click to expand...
Click to collapse
I havent looked yet what about the other debrick image thats here in the threads does that one have em or that one no good either
l33tlinuxh4x0r said:
Exactly and the only tutorial that I can find is an outdated txt file that no longer works.
Click to expand...
Click to collapse
try this xmls and firehose see if it works
https://drive.google.com/open?id=0B2OlLU7vg4YzSTFNX1l0Nk83RVE
TheMadScientist420 said:
try this xmls and firehose see if it works
https://drive.google.com/open?id=0B2OlLU7vg4YzSTFNX1l0Nk83RVE
Click to expand...
Click to collapse
No, those files do not work. They need to be updated. Updating the Laf.img and sb1.img would be easy. Some of the other files not so much as they aren't in a typical rom afaik.
Attached is a copy of the LGUP_common.dll extracted from the US Unlocked LG V40 model. I was wondering if anybody had knowledge on patching it so it would work with LGUP. Currently when it is used, LGUP runs into DLL for V405QA11b is not installed properly. Please, install a DLL package(*.msi). for the model. I just want to run a fresh restore on my device. The DLL version should read 1,0,38,3 as it does in LG Flash Tool.
If someone manages to patch the dll or modify it that it does work this might open up the possibility or closer to the possibility of rooting as well
ps3hacker3 said:
If someone manages to patch the dll or modify it that it does work this might open up the possibility or closer to the possibility of rooting as well
Click to expand...
Click to collapse
No this is a separate issue. LGUP simply does not work with the V40 DLL from what I have tested. Even the V30, all LGUP needed was the LGUPc.dll file extracted from the kdz renamed to LGUP_common.dll and placed in the model/common folder of LGUP for it to work, however for some reason with the V40 it seems to not be the case. It should be some HEX editing to the DLL (I would try to look into it and do it myself if I weren't so busy), to make it compatible with LGUP. Rooting is an entirely different matter. The US unlocked V40, at least has the ability to boot into fastboot, which leaves the possibility of LG opening the ability to unlock the bootloader. Once that is done, then all we need is a TWRP build, which honestly is the least of our problems. As for the other variants, it really depends on a vunerability being found that can be used. Currently I am downloading the other two firmwares that were posted, seeing if their DLL's have anything that may solve this, but the download speeds for those two KDZ's are painfully slow, and I don't think I will be able to do anything with them up to at least this weekend.
So the us version the t mobile version of the LG v40 can be unlocked and rooted?
xXCoolGuYXx said:
So the us version the t mobile version of the LG v40 can be unlocked and rooted?
Click to expand...
Click to collapse
The unlocked B&O US one has the options to unlock but we have no code for it....
Ainz_Ooal_Gown said:
The unlocked B&O US one has the options to unlock but we have no code for it....
Click to expand...
Click to collapse
Is there a form for this so I can follow it? And thanks for the info I though I read on Google they found a way to unlock it
---------- Post added at 07:01 PM ---------- Previous post was at 06:59 PM ----------
xXCoolGuYXx said:
Is there a form for this so I can follow it? And thanks for the info I though I read on Google they found a way to unlock it
Click to expand...
Click to collapse
Here
https://www.techdroidtips.com/unlock-bootloader-lg-v40-thinq/
---------- Post added at 07:03 PM ---------- Previous post was at 07:01 PM ----------
xXCoolGuYXx said:
Is there a form for this so I can follow it? And thanks for the info I though I read on Google they found a way to unlock it
---------- Post added at 07:01 PM ---------- Previous post was at 06:59 PM ----------
Here
https://www.techdroidtips.com/unlock-bootloader-lg-v40-thinq/
Click to expand...
Click to collapse
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0702
xXCoolGuYXx said:
Is there a form for this so I can follow it? And thanks for the info I though I read on Google they found a way to unlock it
---------- Post added at 07:01 PM ---------- Previous post was at 06:59 PM ----------
Here
https://www.techdroidtips.com/unlock-bootloader-lg-v40-thinq/
---------- Post added at 07:03 PM ---------- Previous post was at 07:01 PM ----------
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0702
Click to expand...
Click to collapse
Here http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0703
If you notice no V40 model has the unlock code as of yet, that im aware of the US Unlocked B&O version is the only one with Access to the Bootloader/Fastboot area the other models that try to reach it just get a normal reboot...but they still need to release the unlock code for them to use.
You can also checkout my thread here: https://forum.xda-developers.com/lg-v40/help/root-t3878148/ Where everyone seems to be chiming in
Ainz_Ooal_Gown said:
Here http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0703
If you notice no V40 model has the unlock code as of yet, that im aware of the US Unlocked B&O version is the only one with Access to the Bootloader/Fastboot area the other models that try to reach it just get a normal reboot...but they still need to release the unlock code for them to use.
You can also checkout my thread here: https://forum.xda-developers.com/lg-v40/help/root-t3878148/ Where everyone seems to be chiming in
Click to expand...
Click to collapse
Is the t mobile one the one that can go to bootloader?
xXCoolGuYXx said:
Is the t mobile one the one that can go to bootloader?
Click to expand...
Click to collapse
Well if you have it try the button combination to reach it or via adb on PC but if you get a normal reboot then you don't have access
Ainz_Ooal_Gown said:
Well if you have it try the button combination to reach it or via adb on PC but if you get a normal reboot then you don't have access
Click to expand...
Click to collapse
Oh dang I only ask because I might buy one if it could
The Elite said:
Attached is a copy of the LGUP_common.dll extracted from the US Unlocked LG V40 model. I was wondering if anybody had knowledge on patching it so it would work with LGUP. Currently when it is used, LGUP runs into DLL for V405QA11b is not installed properly. Please, install a DLL package(*.msi). for the model. I just want to run a fresh restore on my device. The DLL version should read 1,0,38,3 as it does in LG Flash Tool.
Click to expand...
Click to collapse
I am pretty sure we use a hex editor and find all instances of partition dl and switch all the values to true i think only bcheck is false by default and add store in front of the dev thats just my theory its a lot of work to do but if someone wants to try you can. I might be wrong there is no info anywhere about patching dll's and also changing value to true changes size of dll i dont know if that matters or not.
awireless said:
I am pretty sure we use a hex editor and find all instances of partition dl and switch all the values to true i think only bcheck is false by default and add store in front of the dev thats just my theory its a lot of work to do but if someone wants to try you can. I might be wrong there is no info anywhere about patching dll's and also changing value to true changes size of dll i dont know if that matters or not.
Click to expand...
Click to collapse
I see. I was going to see the differences in between the old DLL's that worked straight from extraction and this one which doesn't to see if I could "patch" it so it would using IDA pro, but I'm pretty busy and haven't looked into this stuff before so yeah also kind of reluctant on wasting time, like as you said there really isn't much info on this stuff. But because flash too, an older tool than LGUP, recognizes the dll and its versioning. So there must at least be some similarities or if its the worst case scenario it only shares some version variable.
The Elite said:
I see. I was going to see the differences in between the old DLL's that worked straight from extraction and this one which doesn't to see if I could "patch" it so it would using IDA pro, but I'm pretty busy and haven't looked into this stuff before so yeah also kind of reluctant on wasting time, like as you said there really isn't much info on this stuff. But because flash too, an older tool than LGUP, recognizes the dll and its versioning. So there must at least be some similarities or if its the worst case scenario it only shares some version variable.
Click to expand...
Click to collapse
Do you have the same model dll and patched version of that dll? i couldn't get a hold of one the ones i have is all different so i couldn't compare
awireless said:
Do you have the same model dll and patched version of that dll? i couldn't get a hold of one the ones i have is all different so i couldn't compare
Click to expand...
Click to collapse
I can probably end up finding one, as I have most the V30 KDZs for the H933, and I think there are patched DLL's lying around XDA, but the problem here with the V40 DLL is that it doesn't work straight from extraction of the kdz. The first step is to get it working and then the second step is getting it working with the dev options.
Hello everyone. Any updates in the correct DLL for LGUP V40? Thanks
The Elite said:
Attached is a copy of the LGUP_common.dll extracted from the US Unlocked LG V40 model. I was wondering if anybody had knowledge on patching it so it would work with LGUP. Currently when it is used, LGUP runs into DLL for V405QA11b is not installed properly. Please, install a DLL package(*.msi). for the model. I just want to run a fresh restore on my device. The DLL version should read 1,0,38,3 as it does in LG Flash Tool.
Click to expand...
Click to collapse
I was going through the dll in hex editor and i notice there was an error code saying something about lgup version lower then 1.16 so maybe the key is getting newer version of lgup. the problem is 1.15 isnt even accessible.
awireless said:
I was going through the dll in hex editor and i notice there was an error code saying something about lgup version lower then 1.16 so maybe the key is getting newer version of lgup. the problem is 1.15 isnt even accessible.
Click to expand...
Click to collapse
Have you tried editing that check? I honestly was more or less waiting on an official bootloader unlock, but it doesn't seem like thats coming for the US Unlocked model...
The Elite said:
Have you tried editing that check? I honestly was more or less waiting on an official bootloader unlock, but it doesn't seem like thats coming for the US Unlocked model...
Click to expand...
Click to collapse
it wasnt a check it was a warning text message couldnt find the check part probably encrypted
@theelite @awireless , I'm not sure if you have given up hope on this, but I have the information you need on how to do this. A good friend of mine from China sent me something he found on how to flash a pie KDZ to the LG G7, but the document was in chinese so I couldn't really understand it, but I noticed it detailed the process of how to unlock LGUP in the same way you wanted to enable cross-device flashing, etc. I've done my best to translate and consolidate the document for ease of use. If no one has the time to do this, I will get to it when I have time off from work.
---------- Post added at 10:25 AM ---------- Previous post was at 10:19 AM ----------
Link To Document
Extract it from ZIP archive. (Had to be ZIP format for AndroidFileHost)
zachariahpope said:
@theelite @awireless , I'm not sure if you have given up hope on this, but I have the information you need on how to do this. A good friend of mine from China sent me something he found on how to flash a pie KDZ to the LG G7, but the document was in chinese so I couldn't really understand it, but I noticed it detailed the process of how to unlock LGUP in the same way you wanted to enable cross-device flashing, etc. I've done my best to translate and consolidate the document for ease of use. If no one has the time to do this, I will get to it when I have time off from work.
---------- Post added at 10:25 AM ---------- Previous post was at 10:19 AM ----------
Link To Document
Extract it from ZIP archive. (Had to be ZIP format for AndroidFileHost)
Click to expand...
Click to collapse
That is very awesome nice to know that information but the issue is with the dll of the firmware this is how to patch lgup to let all the options appear we already have the options we need the dll to work.
I really wanted that info though that's really good to know.
Do you still have copy of the Chinese version?