Database Develop

[DEV] [REQUEST THREAD] [Discussion] All In One Android Device Request Thread

For Development Related Requests :
#1. Please begin your post with "Request:". You don't have to mention me. It's very important to have "Request:" (formatting doesn't matter) at the beginning of your post as I don't check the posts manually — I use the TapaTalk API to filter them.
#2. Describe your request in details. Make sure to include any additional info or screenshots you may think helpful.
Please DO NOT ASK QUESTIONS ON THIS THREAD.....This Is A Pure Android One Device Development Request Thread!

Reserved

Request
Make Paranoid Android 4.45 if are willing to build a ROM for Android One...
4.45 is the latest stable version out there, 4.5 is in alpha but it's good though with L styled recent apps switching
I'd say, go for PA as we already have CM11 and OMNI ROM in progress. Rest is your choice :good:

paranoid android
Dear Dev,
Please make a rom woith fully stable version....omni rom is nice but it has some few bugs...please correct it...
and also make paranoid android rom for android one devices...
and also please post link of original stock roms of android one devices and full procedure first.....
thanks
mahesh.g

psychopac said:
Make Paranoid Android 4.45 if are willing to build a ROM for Android One...
4.45 is the latest stable version out there, 4.5 is in alpha but it's good though with L styled recent apps switching
I'd say, go for PA as we already have CM11 and OMNI ROM in progress. Rest is your choice :good:
Click to expand...
Click to collapse
As Quoted [email protected]##W4TCH0UT## on Facebook looks like he is building AOSPA...should ask him! ?

Kunal.Kene.1797 said:
As Quoted [email protected]##W4TCH0UT## on Facebook looks like he is building AOSPA...should ask him! ?
Click to expand...
Click to collapse
He released paranoid android .. Hope Sim issue's sort out as quickly as possible..

deccen90 said:
He released paranoid android .. Hope Sim issue's sort out as quickly as possible..
Click to expand...
Click to collapse
Its Source Is Damaged...No Customization Options Available except (Theme Engine) hope He Fixes It Soon:highfive:

Kunal.Kene.1797 said:
Its Source Is Damaged...No Customization Options Available except (Theme Engine) hope He Fixes It Soon:highfive:
Click to expand...
Click to collapse
Now I get it. PA hasn't actually updated their customization options source since jellybean. They're trying hard to bring it back, but no luck. Paranoid Android 4.4.4 has NO CUSTOMIZATION options.

##W4TCH0UT## said:
Now I get it. PA hasn't actually updated their customization options source since jellybean. They're trying hard to bring it back, but no luck. Paranoid Android 4.4.4 has NO CUSTOMIZATION options.
Click to expand...
Click to collapse
That made me cry...i loved PA a lot [emoji22]...well then what will you be working on next [emoji4] ?
Posted Using Android One SmartPhone Using Tapatalk.

Kunal.Kene.1797 said:
That made me cry...i loved PA a lot [emoji22]...well then what will you be working on next [emoji4] ?
Posted Using Android One SmartPhone Using Tapatalk.
Click to expand...
Click to collapse
It's a secret

##W4TCH0UT## said:
It's a secret
Click to expand...
Click to collapse
Well I and WE Love Them [emoji6]
Posted Using Android One SmartPhone Using Tapatalk.

##W4TCH0UT## said:
It's a secret
Click to expand...
Click to collapse
Port miui ROM lots of people losing great android one mobiles with kernel sources for that ROM..[emoji6]

Miui sucks
deccen90 said:
Port miui ROM lots of people losing great android one mobiles with kernel sources for that ROM..[emoji6]
Click to expand...
Click to collapse
Uses A Lot Of RAM ANd Slows DOwn The Performance! Even Visually not of my liking!

Please develop kernels with "double tap to wake up device" feature

Kernel for overlcocking
REQUEST
A kernel with options available for overclocking. There is the Thunderzap kernel...but it doesn't allow overclocking..
Pleaser work on it! Please!
Thanks in advance :victory: :laugh: :laugh: :good:

I'm on stock rooted ROM with custom kernel and recovery with some bloat removed even planning to flash custom roms .... how to make my mobile ready for android lollipop update give multiple options ??

pls port siyah kernel or any other dual boot kernel
hey devs...pls port siyah or any other dual boot kernel....i want one permanent rom which will be stable and one rom with which i can play with..........and more there will be no issue of restoring stock rom again nd again.....thnqqq devs....rock on.....jai mata di

kapish said:
hey devs...pls port siyah or any other dual boot kernel....i want one permanent rom which will be stable and one rom with which i can play with..........and more there will be no issue of restoring stock rom again nd again.....thnqqq devs....rock on.....jai mata di
Click to expand...
Click to collapse
No need of dual boot kernel just backup ROMs it will backup kernel, ROM just restore .. I'm switching from stock to cm11 without any issue's

deccen90 said:
No need of dual boot kernel just backup ROMs it will backup kernel, ROM just restore .. I'm switching from stock to cm11 without any issue's
Click to expand...
Click to collapse
but backups from cwm are very huge like 800mb..........and can u tell me whats r the bugs in cm11...can i use it for daily purpose

kapish said:
but backups from cwm are very huge like 800mb..........and can u tell me whats r the bugs in cm11...can i use it for daily purpose
Click to expand...
Click to collapse
It's as stable as stock with sim2 data error ..agps fixed on upcoming release .. I'm using it as daily drive more battery backup on standby

Which ROM much Better? CM 12.1 or AOSPA 5.1?

We are move from MIUI and try another ROM and my choice is CM 12.1 that already official support or AOSPA (Paranoid Android) that also got Official/Legacy version and already on Stable version.
My Question is which one better for daily use? I currently use CM 12.1 Nightly version. And the problem I got is Google Camera Panorama and Photosphere didn't work. Also HDR Mode is Fail...
Does AOSPA much better handle on it? And does AOSPA ROOT enabled by default or we need to install another App? As far I know, CM 12.1 we can enable ROOT with simple step.
Thanks and we need your feedback...
Regards
@jauhari

AOSPA requires SuperSU to be flashed, as the newer versions do not come preinstalled. Camera is no different than on CM 12.1.
Both are pretty much the same, although I recommend CM because some if not most of the PA updates cause a bootloop, and the OP from there says he will cease to work on it.

Try Ressurection Remix build 16
Sent from my MI 3W using Tapatalk

LcsZhDrw said:
AOSPA requires SuperSU to be flashed, as the newer versions do not come preinstalled. Camera is no different than on CM 12.1.
Both are pretty much the same, although I recommend CM because some if not most of the PA updates cause a bootloop, and the OP from there says he will cease to work on it.
Click to expand...
Click to collapse
So Google Camera have issues too on AOSPA?

does this ROM (Ressurection Remix build 16) Google Camera Photosphere and Panorama working good? Share this ROM URL please....

Yes
Sent from my MI 3W using Tapatalk

Aka9413 said:
Yes
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
Let's me come ini... another question.. does this ROM have heating issues?

jauhari said:
Let's me come ini... another question.. does this ROM have heating issues?
Click to expand...
Click to collapse
No for me
Sent from my MI 3W using Tapatalk

@jauhari This is the development section bro. Please move this thread to the General section and discuss there.
Cheers

rajib4 said:
@jauhari This is the development section bro. Please move this thread to the General section and discuss there.
Cheers
Click to expand...
Click to collapse
Thanks.... I will happy move it :angel:
But I don't know how to move my thread to General Section (

jauhari said:
Thanks.... I will happy move it :angel:
But I don't know how to move my thread to General Section (
Click to expand...
Click to collapse
Ask moderator maybe?

jauhari said:
We are move from MIUI and try another ROM and my choice is CM 12.1 that already official support or AOSPA (Paranoid Android) that also got Official/Legacy version and already on Stable version.
My Question is which one better for daily use? I currently use CM 12.1 Nightly version. And the problem I got is Google Camera Panorama and Photosphere didn't work. Also HDR Mode is Fail...
Does AOSPA much better handle on it? And does AOSPA ROOT enabled by default or we need to install another App? As far I know, CM 12.1 we can enable ROOT with simple step.
Thanks and we need your feedback...
Regards
@jauhari
Click to expand...
Click to collapse
I have used the latest Paranoid Android ROM (31st August build I think). Rock Solid, almost boringly so. My first choice ROM is EOS Revival, also AOSP based. The latest build is well worth trying.
Both use the CM theme engine, I dislike messing with layers...
I am yet to try the "official CM12.1" which is getting a lot of attention, but I have used AICP's which is based on CM12.1 - generally good though the quality varies from build to build (eg, occasional reboots, that sort of thing). Other CM12.1 ROMs I have tried briefly had random issues too between builds, so it could be due to CM12.1 itself
But as ever, the only real answer to such a question is "Nandroid current ROM, flash & set up new ROM run for a day"

paul c said:
I have used the latest Paranoid Android ROM (31st August build I think). Rock Solid, almost boringly so. My first choice ROM is EOS Revival, also AOSP based. The latest build is well worth trying.
Both use the CM theme engine, I dislike messing with layers...
I am yet to try the "official CM12.1" which is getting a lot of attention, but I have used AICP's which is based on CM12.1 - generally good though the quality varies from build to build (eg, occasional reboots, that sort of thing). Other CM12.1 ROMs I have tried briefly had random issues too between builds, so it could be due to CM12.1 itself
But as ever, the only real answer to such a question is "Nandroid current ROM, flash & set up new ROM run for a day"
Click to expand...
Click to collapse
Thanks for you feedback.. I am currently use Resurrection Remix. This ROM have same features on CM 12.1 (Theme) and also some AOSPA feature such as custon navbar..
The most happy one is... Google Camera Photosphere and Panorama running well on this ROM

[ROM][5.1.1] Unofficial OmniROM for vibrantmtd by Coldwindofnowhere (16/04/2016)

OmniROM - Lollipop Android 5.1.1 - for Samsung Vibrantmtd ​
What is Omnirom?
A new Android custom rom has been announced at the BABBQ (Big Android BBQ) by @XpLoDWilD, @Chainfire, @Dees_Troy & Team. For more information go to omnirom's website
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
This Rom is build with Omnirom source without changes except:
- The bigmem switch included in setting, advanced, big thanks to @xc-racer99
- The kernel, big thanks to @me
This Rom is compiled with SaberMod http://forum.xda-developers.com/android/software-hacking/toolchains-sabermod-arm-arm64-t3064459
And the kernel with Cortex-A8 optimized Linaro 4.9.4 toolchain http://forum.xda-developers.com/showthread.php?t=2098133
WHAT IS NOT WORKING?
same bug as Unofficial build from Humberos.
How To Flash:
Download the Rom for your device and copy to your phone
Reboot into Recovery
Wipe Data Factory Reset
flash Rom
flash 5.1.x GApps
Special Thanks :
the omnirom team.
@humberos, without him this rom wouldn't be possible.
@Christopher83 for is toolchain.
@sparksco for is toolchain.
@xc-racer99 for his contribution.
Download Link :
[URL="http://www.mediafire.com/download/nh4vaj6do2454qb/omni-5.1.1-20151119-vibrantmtd-HOMEMADE.zip"]http://www.mediafire.com/download/nh4vaj6do2454qb/omni-5.1.1-20151119-vibrantmtd-HOMEMADE.zip[/URL]
Last update : https://www.androidfilehost.com/?fid=24499762636001940
I don't own a vibrant, so i can't test the rom myself, if you have any issue post it here but i might not be able to fix it.
Contributors
@Coldwindofnowhere
Source Code: https://github.com/omnirom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-10-19
Last Updated 2015-12-02
>If you like my work, hitting the thanks button won't hurt you<​

Reserved

What is different about this build from other Omnirom 5.1 vibrant builds?

rosco77 said:
What is different about this build from other Omnirom 5.1 vibrant builds?
Click to expand...
Click to collapse
Thanks for the awesome work and building omni rom for vibrant. The rom itself is fast and smooth while having no bugs. The one thing which makes this rom different from the omni rom is the new kernel coldwindofnowhere added which contain many new features such as governors like smartass v2, battery life extender, fast charge, big memory support and toggle in advanced menu. Also this was possibly compiled with the newest source code. This rom is very well worth a try because its a master piece and your kernel is like icing on the cake. Thanks for your support an keep up the good work:good::good:

I'm trying to come from Slimkat but I get a status 7 installation aborted error message when trying to flash. Any advice?

rosco77 said:
I'm trying to come from Slimkat but I get a status 7 installation aborted error message when trying to flash. Any advice?
Click to expand...
Click to collapse
Try both TWRP or CWM because i had no problem. However, i was already in android lollipop while flashing this rom so just try flashing a lollipop rom which works on your device such as code rom to get to the latest TWRP then try

rosco77 said:
What is different about this build from other Omnirom 5.1 vibrant builds?
Click to expand...
Click to collapse
Faster
---------- Post added at 06:38 AM ---------- Previous post was at 06:34 AM ----------
rosco77 said:
I'm trying to come from Slimkat but I get a status 7 installation aborted error message when trying to flash. Any advice?
Click to expand...
Click to collapse
If you get status 7 error, dont worry flash again if its still there navigate to reboot to recovery and flash rom.zip again. Done

Thanks for the advice guys. Rebooting recovery and flashing again still didn't work. I used cm11 kernel to go back to a slightly older version of CWM and it worked but after i booted up I was getting reboots constantly. It took me several tries just to get through the setup wizard. The reboot problem started getting better over time but it was still going on so I clocked the kernel back down to 1000Mhz and haven't had any more reboots yet but the phone has a little lag now. It was super smooth at 1400Mhz. It's still an awesome rom. This is my first time trying a Lollipop rom and so far it is my favorite rom of all time for this device. Thanks for the build OP.
The only real issue I'm having right now is I can't download anything. The wifi and network data work fine but when I try to download an app from the play store it starts but then I get an error message (can't download app error code:491). I thought I would try another gapps from the browser but when I try to download the zip it starts to download but stays at zero percent.
Any advice for me on the downloads problem? Or how I can overclock without getting the reboots?

rosco77 said:
Thanks for the advice guys. Rebooting recovery and flashing again still didn't work. I used cm11 kernel to go back to a slightly older version of CWM and it worked but after i booted up I was getting reboots constantly. It took me several tries just to get through the setup wizard. The reboot problem started getting better over time but it was still going on so I clocked the kernel back down to 1000Mhz and haven't had any more reboots yet but the phone has a little lag now. It was super smooth at 1400Mhz. It's still an awesome rom. This is my first time trying a Lollipop rom and so far it is my favorite rom of all time for this device. Thanks for the build OP.
The only real issue I'm having right now is I can't download anything. The wifi and network data work fine but when I try to download an app from the play store it starts but then I get an error message (can't download app error code:491). I thought I would try another gapps from the browser but when I try to download the zip it starts to download but stays at zero percent.
Any advice for me on the downloads problem? Or how I can overclock without getting the reboots?
Click to expand...
Click to collapse
You can try this gapps https://mega.nz/#F!G0QXXRAC!pZ063qCaa5lxdD73SarU6Q

I don't think Gapps is the problem for me. I wiped and reflashed the rom this time with no gapps and the downloads from the browser still don't work. I tried to download things from several different sources and everything stays at zero percent.

Another thing I am trying to get working is swype on the keyboard. Is that something that does not work on vibrant lollipop roms or is it working for everyone else.

rosco77 said:
Another thing I am trying to get working is swype on the keyboard. Is that something that does not work on vibrant lollipop roms or is it working for everyone else.
Click to expand...
Click to collapse
No it's a bug present on all LP roms i know, you can still you an alternative keyboard to get around this issue

Ok, thanks. I got the google keyboard off play store. It's the same keyboard and it functions just fine. I fixed the download problem by flashing a different omni lollipop rom, testing to make sure download was working then doing a dirty flash back to this rom. Works great and I think I found a new daily driver. Thanks Coldwindofnowhere.
Edit: One other thing I forgot to mention, I can't get TWRP to flash anything. It always fails. For some reason I can only get it to flash a kernel so I have to flash my CM11 kernel and reboot recovery to get into CWM then reflash the rom and gapps. This problem was present when I flashed the other version of Omni Lollipop also. Not a huge problem for me. I will just keep my CM11 kernel in the downloads folder and use that any time I need to flash something.

rosco77 said:
Ok, thanks. I got the google keyboard off play store. It's the same keyboard and it functions just fine. I fixed the download problem by flashing a different omni lollipop rom, testing to make sure download was working then doing a dirty flash back to this rom. Works great and I think I found a new daily driver. Thanks Coldwindofnowhere.
Edit: One other thing I forgot to mention, I can't get TWRP to flash anything. It always fails. For some reason I can only get it to flash a kernel so I have to flash my CM11 kernel and reboot recovery to get into CWM then reflash the rom and gapps. This problem was present when I flashed the other version of Omni Lollipop also. Not a huge problem for me. I will just keep my CM11 kernel in the downloads folder and use that any time I need to flash something.
Click to expand...
Click to collapse
Um i don't have this issue on my Galaxy , maybe it's Vibrant related ... honestly i don't know. Can you give a screenshot or just tell me what error it shows when you flash something ?

New build coming soon, it will be up in a few hours. It includes the latest omni source, my latest kernel (@rosco77 i'm pretty sure your TWRP issue will be gone) and a new toolchain. I will update the link in the OP.
Links in the OP updated !

Coldwindofnowhere said:
New build coming soon, it will be up in a few hours. It includes the latest omni source, my latest kernel (@rosco77 i'm pretty sure your TWRP issue will be gone) and a new toolchain. I will update the link in the OP.
Click to expand...
Click to collapse
Yeah

Building right now, sorry for the delay. It should be up in like 3-4 hours if i don't get any error
Link updated in the OP

Coldwindofnowhere said:
Building right now, sorry for the delay. It should be up in like 3-4 hours if i don't get any error
Click to expand...
Click to collapse
Thanks man for supporting vibrant, and take your time building the rom

@Coldwindofnowhere Can you also build your kernel 5.1.1 for vibrant. I and people here are very appreciate of that

Thanhtho96 said:
@Coldwindofnowhere Can you also build your kernel 5.1.1 for vibrant. I and people here are very appreciate of that
Click to expand...
Click to collapse
Well you can just extract the boot.img from the rom and flash it ...

[ROM][MM][UNOFFICIAL] Cyanogenmod for Kenzo! [OPTIMIZED][25/10/16]

what is this?
cm + kernel/tree/vendor specific optimizations
instructions:
flash firmware (if coming from miui)
flash rom (dl link in 2nd post)
flash gapps
source: cm-fk
this would not have been possible if it weren't for:
umang96, thestrix, banmeifyouwant, cyanogenmod, themuppets
rules: be nice & off-topic is <3 here.

latest release (cm14 ambient display back ported!)

Seems interesting. Will report back soon.
Sent from my Redmi Note 3 using Tapatalk

thakurneel said:
Seems interesting. Will report back soon.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Please do, i have been using this as my daily driver for about a day now and it delivers.

Goodix FP supported on this ROM ??

bravonova said:
Goodix FP supported on this ROM ??
Click to expand...
Click to collapse
if it does not work for you on official CM13, it won't work here unfortunately, sorry :/

Nice, will try it, also, don't use uber/saber/other tc, stock one works best and very stable.

Umang96 said:
Nice, will try it, also, don't use uber/saber/other tc, stock one works best and very stable.
Click to expand...
Click to collapse
Thanks
Yeah i was a bit skeptical on saber tc and all the other tc's and that's why i made my first build with the stock tc, but i might make a personal build later and compare.

DiamondBond said:
Thanks
Yeah i was a bit skeptical on saber tc and all the other tc's and that's why i made my first build with the stock tc, but i might make a personal build later and compare.
Click to expand...
Click to collapse
Also try to do odex all apps, there is an unofficial odexed cm13 available for OP3 in xda forum, also, you can directly build with radon if you want, just clone radon-cm branch of my kernel instead of stock cm source.

Umang96 said:
Also try to do odex all apps, there is an unofficial odexed cm13 available for OP3 in xda forum.
Click to expand...
Click to collapse
I'll have a look into odexing during builds (idk if that's possible), but from past experiences, it does not really offer much, it just saves device storage space (which is why it was so heavily used back in 2010-2012 on those ~1gb internal storage devices lol)

flashing, will review

RaunakRM said:
flashing, will review
Click to expand...
Click to collapse
thanks

Just flashed it, first impression the ROM is smooth. But would you also provide the ones compiled using UBERTC4.9 or Linaro4.9? I would be glad to be the first one who tried it. Even if it causing errors and whatsnot.

interesting project .Just curious, your build is base on snapshot or nightly cm13 build ?

If this rom uses radon kernel in-built for future builds.... It would be like a best rom+ will narrow down any bugs arising due to rom or kernel

MOVZX said:
Just flashed it, first impression the ROM is smooth. But would you also provide the ones compiled using UBERTC4.9 or Linaro4.9? I would be glad to be the first one who tried it. Even if it causing errors and whatsnot.
Click to expand...
Click to collapse
As I discussed above, I might make a second build soon with Uber TC but optimizing all apks by hand literally takes me an entire 5-6 hours (of which I sit infront of my computer decompiling apk's and optimizing each and every .PNG inside of them then recompiling them and sending them to my device to make sure I have not messed up any graphics in those apk's, hence why this was built 23/8/16 but I only finished the optimizations by today.
thanhnvt194 said:
interesting project .Just curious, your build is base on snapshot or nightly cm13 build ?
Click to expand...
Click to collapse
It's based on the latest cm13 sources from 23/8/16 so I guess you could say it's based on nightly sources lol
Dr. Joy Das said:
If this rom uses radon kernel in-built for future builds.... It would be like a best rom+ will narrow down any bugs arising due to rom or kernel
Click to expand...
Click to collapse
I'll speak with Umang and see if he will let me compile with Radon kernel

Just flashed it,
Rom is smooth
N everything works fine
Battery is decent have to test more with full charge
Awesome bro
Sent from my Redmi Note 3 using XDA-Developers mobile app

Could i update nightly by system updater? Or you must upload new build?
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

Not able to download the ROM from the given link..can u please provide me a different download link?..thank you

hitesh1792 said:
Not able to download the ROM from the given link..can u please provide me a different download link?..thank you
Click to expand...
Click to collapse
Same problem. Webpage not available.
Please upload on other website.

[KERNEL]GrapheneKernel for Nougat (7.0/7.1) (Port of LOS 14 kernel for all nougats)

Hey guys... Due to the absence of any custom kernel for Nougat, I wanted to get the LOS14 (and now AEX) overclock to1.6GHz... So here it is...
P.S. Clarification: This isn't my kernel, I didn't build it, This kernel was built by the one and only Iguma Osas for LOS14. I extracted this kernel from it and packaged it using Lazy flasher...
Special kudos to @osas514 for maintaining LOS14 for our dear device and for giving me permission to post this...
FEATURES:
1. OC to 1.6GHz
2. Zram defaulting to 250MB
3. More... But i forgot... Check LOS14 changelog for them...
Download link & instructions on 2nd post
Roms & bugs on 3rd post
Changelog on 4th post
Credits:
@jcadduono for the amazing Lazy Flasher
@osas514 for the amazing LOS14 ROM
Links:
LOS 14: forum.xda-developers.com/galaxy-grand-duos/development/rom-lineageos-14-1-t3543766
LOS 14 kernel source: https://github.com/ghsr/android_kernel_samsung_i9082?files=1

Note: Zip only flashable by twrp... You can't flash in other recoveries...
INSTRUCTIONS:
1. Turn off signature verification (I'll sign it soon)
3. Flash it
4. Use your favourite kernel manager and set max freq to 1600MHz
5. Post your rom here:fingers-crossed:
6. If you want to revert to stock kernel (and ramdisk), backup is stored at /data/local/boot-backup.img
Link: (V2) :https://drive.google.com/file/d/0B5RS8IZUE3TkeTNrZHVwT3BJUXc/view?usp=drivesdk]

Confirmed working on these ROMs:
All N roms
BUGS:
Hotspot not working on AICP (works on others) (can somebody else also confirm this?)

Changelog:
20170703: v1: Initial release, kernel from LOS 20170607 build
20170725: v2: Kernel from 20170718 build, no kernel changes (far as i know) but improvements to zip like backing up stock and device verification

Nice work mate

Arrow_29 said:
Nice work mate
Click to expand...
Click to collapse
not my work:laugh:... but you tried yet?

I haven't tried yet but soon I will try

Great kernel but wifi and hotspot not working on Resurrection Remix 5.8.2 rom. Can you fix it?
Thanks!

Venomouz said:
Great kernel but wifi and hotspot not working on Resurrection Remix 5.8.2 rom. Can you fix it?
Thanks!
Click to expand...
Click to collapse
i can't promise a fix, as I'm not much of a dev, but I'll look around. but as i remember, rr5.8.2 never had hotspot working
Glad you liked it

FriendlyNeighborhoodShane said:
i can't promise a fix, as I'm not much of a dev, but I'll look around. but as i remember, rr5.8.2 never had hotspot working
Glad you liked it
Click to expand...
Click to collapse
RR 5.8.3 everything is working for me (WiFi, Bluetooth, hotspot)

gello0 said:
RR 5.8.3 everything is working for me (WiFi, Bluetooth, hotspot)
Click to expand...
Click to collapse
yeah... glad dude...
that's what I said... 8.2 was released before the hotspot fix... 8.3 came out after the fix...

FriendlyNeighborhoodShane said:
i can't promise a fix, as I'm not much of a dev, but I'll look around. but as i remember, rr5.8.2 never had hotspot working
Glad you liked it
Click to expand...
Click to collapse
My wifi and hotspot working fine before in rr 5.8.2. After I flash this kernel, it's showing error in hotspot setting and wifi won't turn on. It's working fine back after I restore boot. Btw i will try it on 5.8.3. Thanks:good:

Working fine on rr5.8.3. Thanks to @gelo0 and @friendlyNeigborhoodShane. Keep it up! ?

thx
I try and I can not use Wifi.
it can't turn on.
i use on rr 5.8.2 rom
it has any fix?
sorry for really bad english.

dvd2545 said:
thx
I try and I can not use Wifi.
it can't turn on.
i use on rr 5.8.2 rom
it has any fix?
sorry for really bad english.
Click to expand...
Click to collapse
yes, upgrade to 5.8.3

FriendlyNeighborhoodShane said:
yes, upgrade to 5.8.3
Click to expand...
Click to collapse
But i have never seen 5.8.3
I see only rr 5.8.2.
Where can i find 5.8.3.
thank you for reply me.

dvd2545 said:
But i have never seen 5.8.3
I see only rr 5.8.2.
Where can i find 5.8.3.
thank you for reply me.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=817550096634779870
there ya go

1. How to revert to stock kernel
Can you tell me procedure!
2.can i flash it after flashing the rom or i need to flash it before the rom

joeferyyd said:
1. How to revert to stock kernel
Can you tell me procedure!
2.can i flash it after flashing the rom or i need to flash it before the rom
Click to expand...
Click to collapse
Stock kernel is stored in data/local/boot-backup.img, restore it from twrp (or any app if you know how to).
AFTER flashing the rom! and also after rom updates, as rom flashes back stock kernel.
Sent from my GT-I9082 using XDA Labs

vibration not working here