Related
Hi everyone,
When I first received my phone a few days ago, I unlocked and rooted it. But then I noticed I wasn't passing safetynet so I unrooted it.
Eversince, when I try to reroot it, it won't boot. It stays stuck on the boot animation (I waited up to 20 minutes).
If I reflash the ROM, it boots. If I reflash the ROM, wipe davlik & cache, and root, it stays stuck on the boot animation.
So my guess was that it was not ROM related, nor cache related, so it must be caused by something on my data partition. But I don't want to wipe it if I have another way to fix it.
Any idea on what might be preventing my phone from booting when I root it?
Thanks!
after root do you have flashed superSU?
RotesMeerJogger said:
after root do you have flashed superSU?
Click to expand...
Click to collapse
Well I flashed superSU to root the phone!
But when I do it, it won't boot.
Probably image got corrupted, Download the zip of the rom "oxygen os zip", clean flash it through recovery, try to root again
Daman5202 said:
Probably image got corrupted, Download the zip of the rom "oxygen os zip", clean flash it through recovery, try to root again
Click to expand...
Click to collapse
When I flash if without root it boots perfectly, are you sure about the image being corrupted?
gigaboss said:
When I flash if without root it boots perfectly, are you sure about the image being corrupted?
Click to expand...
Click to collapse
As you said "it stucks on boot", many times the phone gets stuck on boot when the image is corrupted , its called soft brick. Try downloading the zip file of os, flash it through recovery. The img is probably facing some errors while booting with root access. Are you nougat user? 7.1? And are you using default recovery?
As most people have said here already, in general this should work. So which version of oxygenos are you running? And what recovery? Also, after flashing Supersu, you should not wipe caches as far as I know (forgot the source). Re-download the image, and flash it and directly after flash supersu (both in twrp) and your problem should be solved.
donny110 said:
As most people have said here already, in general this should work. So which version of oxygenos are you running? And what recovery? Also, after flashing Supersu, you should not wipe caches as far as I know (forgot the source). Re-download the image, and flash it and directly after flash supersu (both in twrp) and your problem should be solved.
Click to expand...
Click to collapse
OK I am sorry I was not clear enough, this is exactly what I have been doing!
I have TWRP, when I only flash the 3.5.4 OOS it works perfectly. When I flash OOS 3.5.4 and superSU it doesn't boot.
So the image doesn't seem corrupted, I re-downloaded it.
Is it clearer?
gigaboss said:
OK I am sorry I was not clear enough, this is exactly what I have been doing!
I have TWRP, when I only flash the 3.5.4 OOS it works perfectly. When I flash OOS 3.5.4 and superSU it doesn't boot.
So the image doesn't seem corrupted, I re-downloaded it.
Is it clearer?
Click to expand...
Click to collapse
Have you cleared caches before the flash? And are you using the Full OOS 3.5.4? And I assume the most recent Supersu? I did exactly that 2 days ago. Using the full OOS zip that is in one of the threads here on XDA (can't link on phone right now).
Btw. It can bootloop a few times and take awhile once you flash both.. If that doesn't work I guess it's beyond my knowledge. You might want to try if the same thing happens with 3.5.3
gigaboss said:
Hi everyone,
When I first received my phone a few days ago, I unlocked and rooted it. But then I noticed I wasn't passing safetynet so I unrooted it.
Eversince, when I try to reroot it, it won't boot. It stays stuck on the boot animation (I waited up to 20 minutes).
If I reflash the ROM, it boots. If I reflash the ROM, wipe davlik & cache, and root, it stays stuck on the boot animation.
So my guess was that it was not ROM related, nor cache related, so it must be caused by something on my data partition. But I don't want to wipe it if I have another way to fix it.
Any idea on what might be preventing my phone from booting when I root it?
Thanks!
Click to expand...
Click to collapse
I don't have my 3T yet to verify, but did you flash the zip which disables encryption and dm-verity?
EDIT: From the TWRP thread, step 10: http://forum.xda-developers.com/oneplus-3t/development/recovery-twrp-oneplus-3t-t3507308
Any update to this? I have the exact same problem; clean flash 3.5.4 OOS (tried it via twrp, adb sideload and MsmDownloadTool) then flash SuperSU via twrp (tried multiple SuperSU versions) and all results in sitting at the boot animation. I've let it sit for 2 hours and it never gets beyond boot animation. No matter what, I can't get SuperSU to work. However, I have no problem getting phh superuser to boot up. Any idea why SuperSU won't boot for me?
__McB__ said:
Any update to this? I have the exact same problem; clean flash 3.5.4 OOS (tried it via twrp, adb sideload and MsmDownloadTool) then flash SuperSU via twrp (tried multiple SuperSU versions) and all results in sitting at the boot animation. I've let it sit for 2 hours and it never gets beyond boot animation. No matter what, I can't get SuperSU to work. However, I have no problem getting phh superuser to boot up. Any idea why SuperSU won't boot for me?
Click to expand...
Click to collapse
I got to the bottom of my problem (but did not solve it somehow) by formatting and trying every possibility. I lost all my data :crying:
So here is what happens:
-I start with a clean ROM, root it, install kernel, everything works fine EXCEPT for safetynet that won't pass even with root switch
-I try to install suhide 0.55, the phone won't start anymore (stays on boot animation, tried to wait all night)
AND HERE IS THE WEIRD THING.
-If I dirty flash the rom to start over, it boots, if then I flash SuperSU, it won't boot!! As if suhide was still in the data partition and preventing the phone from booting!!
So it means that if I try to install suhide once, I am not able to boot with root anymore... I need to format my data partition and start all over again.
Hmm. My issue is slightly different, I guess. I'm not even attempting suhide, just SuperSU. No matter what, I can't boot up once I flash SuperSU. Guess I'll give it another try with the new 2.79 sr2 and oos4.
Thanks!
__McB__ said:
Hmm. My issue is slightly different, I guess. I'm not even attempting suhide, just SuperSU. No matter what, I can't boot up once I flash SuperSU. Guess I'll give it another try with the new 2.79 sr2 and oos4.
Thanks!
Click to expand...
Click to collapse
Did you have any luck with this? I'm having the same issue. Flash the 4.0.2 update and boots fine. Flash SuperSU or phh (I've tried both!) and I just sit at the boot animation for hours until I get angry and restore nandroid to 3.5.4.
hyperblau said:
Did you have any luck with this? I'm having the same issue. Flash the 4.0.2 update and boots fine. Flash SuperSU or phh (I've tried both!) and I just sit at the boot animation for hours until I get angry and restore nandroid to 3.5.4.
Click to expand...
Click to collapse
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I had a similar issue with my op3t after root it, I wipe data but it won't start, I just flash the zip 5.1 no verity opt encrypt and should be work fine without flashing supersu:good:
hyperblau said:
Did you have any luck with this? I'm having the same issue. Flash the 4.0.2 update and boots fine. Flash SuperSU or phh (I've tried both!) and I just sit at the boot animation for hours until I get angry and restore nandroid to 3.5.4.
Click to expand...
Click to collapse
No, never got it working. Upgraded to 4.0.2 and never looked back.
Maybe you already tried this version.. Otherwise...
I was on Oos 4.5.1 and wanted to update to Oreo. I followed the thread on this forum and downloaded the new TWRP BluSpark img file, the OOS full package and the Magisk zip. Booted into recovery, installed the img file and flashed OOS and the Magisk zip file. When i rebooted into system, i noticed Root wasn't installed and my recovery had reverted to stock recovery but my device bootloader was still unlocked. So i booted into fastboot mode, flashed the Blusparks img file and booted into recovery and flashed the magisk file. Now the phone rebooted and its stuck on the "Powered By Android" screen. The boot image of OP hasn't shown up. What do i do? I really don't want to hard reset my phone :/
No need to hard reset the phone, just go to recovery clean flash excluding internal storage then flash oxygen os 5.0 zip file and magisk 14.5.
Magisk 14.0 has boot issues.
I had similar issues which I resolved easily.
You may trigger DM verity flag after booting which you can disable easily.
ersandeepkr said:
No need to hard reset the phone, just go to recovery clean flash excluding internal storage then flash oxygen os 5.0 zip file and magisk 14.5.
Magisk 14.0 has boot issues.
I had similar issues which I resolved easily.
You may trigger DM verity flag after booting which you can disable easily.
Click to expand...
Click to collapse
Oh yes, i figured Magisk 14.0 was the issue. I waited for 30 mins+ and the phone still didnt boot up, so i switched it off and booted into recovery and flashed just the OOS zip file and it worked. I don't want to wipe data as well.
Can i flash Blusparks twrp from adb, boot into recovery and just flash OOS and Magisk 14.5 and wipe dalvik/cache?
Manjumeth-95 said:
Oh yes, i figured Magisk 14.0 was the issue. I waited for 30 mins+ and the phone still didnt boot up, so i switched it off and booted into recovery and flashed just the OOS zip file and it worked. I don't want to wipe data as well.
Can i flash Blusparks twrp from adb, boot into recovery and just flash OOS and Magisk 14.5 and wipe dalvik/cache?
Click to expand...
Click to collapse
You can flash bluspark recovery from fastboot. But for the successful installation and avoid problems, forget the application data. You can fresh install apps which is always recommended while flashing any ROM even if it is updated version. I never dirty flash ROM. I care for internal storage and not for the small apps.
You can try dirty flash as you stated but stability may be an issue.
Dirty flashed with Magisk 14.5 and it worked
So... was tired of some miscellaneous issues with 4.5.0 (rooted w/ Magisk, TWRP recovery) and decided to finally jump to 5.0. Failed initially in TWRP (was using stock 3.1.xx), moved to the OOS internal upgrade option, and actually managed to boot into 5.0 (albeit stock recovery and no root) after that succeeded.
Powered off, connected to PC, fastboot flashed TWRP 3.1.1 blu spark, rebooted into recovery, reflashed blue spark img, flashed OnePlus3TOxygen_28_OTA_060_all_1711160447.zip (went fine AFAIK, "script succeeded, 1.0000"). Cleared Dalvik/cache, flashed SuperSU v2.82... and this is where things got weird. First, flashing SuperSU failed once at the point of compressing the ramdisk. rebooted into TWRP, tried again, and it finished without error messages. Wiped Dalvik/cache once more and rebooted. This time, I got a permanent boot where my OP3T appeared to freeze at the first OP logo on a black background and would go no further even after 10+ minutes. Swapped out my SuperSU zip with a download straight from their website, same frozen boot. Redownloaded OTA_060_all, same thing. Wiped dalvik/cache/system before each attempt, no luck.
Gave up, fastboot -w, reflashed TWRP blu spark, and now even just drying to flash the plain OTA_060 zip results in a "no OS installed" when I try to reboot. When I try to flash either Magisk v15 or SuperSU 2.82, TWRP freezes entirely in the first steps, crashes to a white notification icon, and requires a long power button hold to reboot. I am lost at this point. AFAIK, my OP3T is basically a blank, wiped slate, and I've never experienced full-on TWRP freezes while flashing before blu spark.
In the meantime, I've installed OTA_057 (4.5.1) instead, thankfully without a bootloop, but fully wiped any suggestions?
I've jumped from Nougat to Oreo too. These are my steps: while on nougat open the TWRP recovery (stock TWRP); MAKE A COMPLETE BACKUP; updated it to the latest version (3.2.1.0.- if you have it installed then there's no need for this step); complete wipe; install the OTA using USB OTG; boot to system; run the first setup; (now TWRP might got overwritten just reboot to recovery, if it reboots to TWRP great, move on, if not then reboot to system and install TWRP using ADB); reboot to TWRP recovery; flash Magisk 15 (or SuperSU, but I don't use it so I can't say if it works); flash kernel if you want; reboot to system; check if Magisk/SuperSU works and that's it. At this point I've made another complete backup just in case I skrew up something in the future. Hope I helped! Good luck!
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Tagtag123 said:
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Click to expand...
Click to collapse
Yep, I believe that's exactly the version I tried I eventually just gave up after doing the complete device wipe through fastboot commands, am now running 5.0 with no problems but have the stock recovery and am not rooted :/ Now I just need to make a backup and then I can mess around and try and find a root method that doesn't basically soft brick my phone...
Even I am running OOS 5.0
The way I rooted is:
Flashed oos 5.0 using TWRP (https://forum.xda-developers.com/devdb/project/dl/?id=27381&task=get)
Boot normally
Reboot to TWRP, flash TWRP using fastboot if you find stock recovery. Then boot to TWRP.
After you in the TWRP recovery, flash superSU 2.82 SR5
Then flash suhide (it helps you hide root from apps which are a bit finicky about root).
This works for me.
SuperSU v2.82-SR5 flashable ZIP:
http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
suhide v1.09 flashable ZIP:
http://download.chainfire.eu/1219/suhide/UPDATE-suhide-v1.09-20171001222116.zip
I just followed these steps coming from rooted 4.5.1 and worked perfectly.
https://forums.oneplus.net/threads/guide-how-to-install-oos-5-0-over-rooted-4-5-1.684519/
Unleashed by my rooted OP3T in 8.0
I have a problem with SuperSU and magisk. I flash in twrp the root zip and then magisk, after that when I want to update it says this;
! Boot img patched by other programs
! please restore stock boot img
Click to expand...
Click to collapse
I don't have any custom rom, i'm actually oos 5.0.3. I first try to root but dm-verity was triggered and then followed all the steps to disable it.
Any solutions?
Nube420 said:
I have a problem with SuperSU and magisk. I flash in twrp the root zip and then magisk, after that when I want to update it says this;
Click to expand...
Click to collapse
Magisk is a root zip. It sounds like you are flashing SuperSU and Magisk. You can only use one or the other, not both!
Reflash stock ROM (or at least stock boot.img). Then flash Magisk. That's it.
Getting the error message that boot.img is modified is normal and expected in your case. SuperSU patched the boot image. Now Magisk is looking for the stock image to patch, and finding a patched one.
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Akash731 said:
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Click to expand...
Click to collapse
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Akash731 said:
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Click to expand...
Click to collapse
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
pradeeppk said:
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
Click to expand...
Click to collapse
I don't want to try custom rom's as this is my main device guess I'm stuck with the encryption then thanks for your help. :good:
Edit:-
Tried TWRP r20 it decrypts fine thanks
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
gewe said:
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
Click to expand...
Click to collapse
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
I am using stock ROM, and yes, also Magisk (installed later). IIRC Magisk is not needed for TWRP to work. When I receive the next OTA notification, I will test this.
The thread you are referring to is for a OnePlus 3T. For our device this is the thread: https://forum.xda-developers.com/moto-g5s-plus/development/recovery-twrp-3-1-1-r7-t3694910.
Since there is no official TWRP for the Moto G5S Plus, I took the following text from the TWRP page for the Moto G5S.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Instead of that you can also use fastboot reboot-bootloader, and then from the bootloader start recovery.
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
gewe said:
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
Click to expand...
Click to collapse
As like you said this is the first time in my life i need to flash magisk to stick twrp.
I usualy doesn't use root or custom roms, install twrp, remove unnecessary apps from stock system, replace host files with adaway hosts, replace or edit gps config files. and continue using stock.
This is the main routine from Android 1.5
(Samsung spica (i think it was the first Android phone from Samsung)).
It may be due to security reason stock kernel or system delete twrp.
When installing magisk it patch stock boot image, that may be the reason of twrp remains after flashing magisk.