Hello guys.
I have a motorola razr i xt890, i was doing as a day on that day when the cell suddenly crashed, and then i deicidi restart it holding the power button, computer when not loading the led. I have tried to enter fastboot mode but it does not work, I tried to connect without a computer holding the camera button and make a process that I saw on YouTube and it also did not work, I would like to know that you have a solution to my problem.
Related
Hey, folks,
I have a Motorola RAZR i with Android 4.1.2. I never did any modification inside the system, even root, 'cause I prefer to not put it on my cellphone. Suddenly, when I was searching on Google Now at night, the phone freezed. I got nervous, but, I tried to restart the system using the combination to put in full power off, with success, but, after, i couldn't turn the phone on until today (I think it happened a one month ago), stoping all the boot process on the giant Motorola logo.
I can't enter in recovery mode too, but the computer detects the phone when I put it on.
Is there somebody who know how to fix it?
Have you tried turning the phone on using power + vol down? As soon as it vibrates let go of power and keep holding vol down until it enters fastboot.
If it doesn't turn on, have you tried plugging in a charger while holding vol down?
If you can access fastboot you can do a factory reset.
Sent from my XT890
Hello all,
I'm not literate in tackling troubleshoot issues with my phone, however, after a couple of months now trying to resolve my phone issue I turn to you for help. My XT890 (Razr-i):
is stuck on the Red M logo
A green light flashes when I plug it in to either the main charger or the USB port on my laptop; the M logo displays and the green light turns off
I've tried all the power button plus volume combinations - the phone turns off, vibrates and returns to the default M logo
When connected via USB, the phone is not detected (Not in Device Manager, RSD lite (6.1.4), USBDeview)
I've tried many suggestions in these forums, however, without access to boot menus on the phone via the button combinations or access to the phone via USB, I'm at a loss as to what I can do
I acknowledge I do not provide much technical information. If you can help with any suggestions I'd be delighted to hear from you.
Many thanks.
Been dealing with the same issue once two weeks ago and now again tonight - only difference is that 2 weeks ago I could only get as far as the motorola icon but now make it as far as the intel icon.
Try the buttons again.
Hold down vol down first and keep it pressed until the very end of the procedure, then press and hold the power button till phone reboots.
When you feel the vibration let go of the only the power button.
As soon as the menu appears you can let go of the vol down button.
This has worked for me every time.
No harm to have the phone connected to a charger while doing this as the battery has been draining
When you get into the boot menu leave the phone in that state till the battery is charged enough to reset it
Other threads and people are more knowledgeable about that than me.
Pretty sure my phone or some part of it is starting to fail at this stage - about 2.5 years old now, as It got a factory reset 2 weeks ago
macaodh said:
Hello all,
I'm not literate in tackling troubleshoot issues with my phone, however, after a couple of months now trying to resolve my phone issue I turn to you for help. My XT890 (Razr-i):
is stuck on the Red M logo
A green light flashes when I plug it in to either the main charger or the USB port on my laptop; the M logo displays and the green light turns off
I've tried all the power button plus volume combinations - the phone turns off, vibrates and returns to the default M logo
When connected via USB, the phone is not detected (Not in Device Manager, RSD lite (6.1.4), USBDeview)
I've tried many suggestions in these forums, however, without access to boot menus on the phone via the button combinations or access to the phone via USB, I'm at a loss as to what I can do
I acknowledge I do not provide much technical information. If you can help with any suggestions I'd be delighted to hear from you.
Many thanks.
Click to expand...
Click to collapse
Guys, please note that the RSA works ONLY on win7 or lower.
I've tried a couple times on win8 and win8.1 and it had the same problem as you (no USB recongnition of the device) . I had to learn by myself that it works flawlessly on win7.
This is the thread that i solved my problem when using 4.1.2 (now im having the same problem with KitKat, it got stuck on the Intel logo).
http://forum.xda-developers.com/raz...elp-please-t2881628/post55735194#post55735194
I hope it helps.
Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .
Sybyl said:
Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .
Click to expand...
Click to collapse
<-
First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim
JoachimP said:
First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim
Click to expand...
Click to collapse
I tried and charged it for almost a day but nothing happened, my computer still couldn't see it.
try using windows device recovery tool..
it same happened with me and I used WDRT and it detected my device..
Dude... You have a dead-boot lumia.
Solution: JTAG (cuz my method of unbricking dead-boot lumia is not working, boots to QUALCOMM Modem Mode)
Hi,
This morning I woke up, my phone was locked on the screensaver, nothing was happening at all. So I har shut it down by keeping the power button pressed.
Since then, I can't turn it on anymore and it does basically nothing. I tried a hard reboot with power button and volume down (and tried also with volume up or both at the same time).
I also tried to plug it in the charger or in the computer but nothing happen at all.
I don't understand, it was working perfectly fine, I have no idea about what to do.
Thanks for any help.
Does it load the miui logo or it doesn't even light up at all?
If it doesn't turn on at all, then that has got to be a hardware issue and you gotta go for repair, if it does load the miui logo, then I can try and help you
Could someone point me into a direction what exactly the problem is? I have used this phone on unofficial LineageOS 18.1 for a few months but suddently after dropping it from not all to high the screen displayed lines and colors similar to those that you see when you drop your phone into water (there was no water contact and the phone didn't fall that great of a distance, maybe like 1 meter/ 3ft).
My first guess is that the screen is broken, but I tried using ADB to extract some files still on the device but was unable to, especially I can't boot into fastboot or recovery it seems...
When pressing the power button the phone vibrates
Pressing the power button and volume down key reboots the phone (as seen on PC). Holding them down a long time shuts the device off or something. it can only be turned back on when plugged in.
I tried all possible button combinations to enter fastboot or EDL but nothing seems to work (Power + Volume Up / Volume Up + Volume Down while connecting to a PC with USB 2.0).
On my PC the device shows up as "MTP USB Device", everytime, not sure if I'm doing the EDL thing wrong...
EDIT: After leaving the device for a day, it suddenly started to vibrate and repeat the sound I guess plays when battery is low, over and over again in an increasing volume. The volume buttons had no effect as did the power button until it stopped and then didn't respond anymore. After plugging it in again it was back to vibrating once after i pressed the power button. What mode is this??
Any help would be greatly appreciated, not sure if it is even bricked but it seems off that I can't enter fastboot or anything else (like EDL), thanks!
applejackrecidivists said:
Could someone point me into a direction what exactly the problem is? I have used this phone on unofficial LineageOS 18.1 for a few months but suddently after dropping it from not all to high the screen displayed lines and colors similar to those that you see when you drop your phone into water (there was no water contact and the phone didn't fall that great of a distance, maybe like 1 meter/ 3ft).
My first guess is that the screen is broken, but I tried using ADB to extract some files still on the device but was unable to, especially I can't boot into fastboot or recovery it seems...
When pressing the power button the phone vibrates
Pressing the power button and volume down key reboots the phone (as seen on PC). Holding them down a long time shuts the device off or something. it can only be turned back on when plugged in.
I tried all possible button combinations to enter fastboot or EDL but nothing seems to work (Power + Volume Up / Volume Up + Volume Down while connecting to a PC with USB 2.0).
On my PC the device shows up as "MTP USB Device", everytime, not sure if I'm doing the EDL thing wrong...
EDIT: After leaving the device for a day, it suddenly started to vibrate and repeat the sound I guess plays when battery is low, over and over again in an increasing volume. The volume buttons had no effect as did the power button until it stopped and then didn't respond anymore. After plugging it in again it was back to vibrating once after i pressed the power button. What mode is this??
Any help would be greatly appreciated, not sure if it is even bricked but it seems off that I can't enter fastboot or anything else (like EDL), thanks!
Click to expand...
Click to collapse
Id tell you to flash raw firmware if possible, a friend of mine had a problem with audio and whatsapp and random stutters, flashing the raw firware for rog 3 may help, sorry but my knowledge aint that great.
looks like your phone is bricked. you can try the below workaround.
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com