Hello, first i want to apologize for my bad english , i am not an american citizen.
I recently bought the device Xiaomi Mi5 32GB 3GB RAM
The device arrived with the original global stock rom and i found some strange issues with it
The volume is very low after about week of using the device suddenly the volume decrease and when i am listening to music i need to raise the volume to max(and no, it is not my earphones, i try with different device and no problem)
The second problem is the touch sensor
Every time i plug in to the charger the touch sensitivity goes crazy and i cant even use the device, it happens also when i have low battery and usually hard reset solves the problem but only temporary and only when phone is not plugged in to charger, and yea i tried different chargers the problems stays with all chargers (3)
I tried upgrading and i tried reset all to stock and nothing
I dont want to switch to CmMod
I have no warranty
Any solutions?
Hartabarta1 said:
Hello, first i want to apologize for my bad english , i am not an american citizen.
I recently bought the device Xiaomi Mi5 32GB 3GB RAM
The device arrived with the original global stock rom and i found some strange issues with it
The volume is very low after about week of using the device suddenly the volume decrease and when i am listening to music i need to raise the volume to max(and no, it is not my earphones, i try with different device and no problem)
The second problem is the touch sensor
Every time i plug in to the charger the touch sensitivity goes crazy and i cant even use the device, it happens also when i have low battery and usually hard reset solves the problem but only temporary and only when phone is not plugged in to charger, and yea i tried different chargers the problems stays with all chargers (3)
I tried upgrading and i tried reset all to stock and nothing
I dont want to switch to CmMod
I have no warranty
Any solutions?
Click to expand...
Click to collapse
Touch issue while charging is due to the charger.
When the charger is defected and sends out variable voltage , it causes the screen to go haywire ..
Try another charger...
Sent from my MI 5 using Tapatalk
SaumyeMehrotra96 said:
Touch issue while charging is due to the charger.
When the charger is defected and sends out variable voltage , it causes the screen to go haywire ..
Try another charger...
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
I have 3 chargers, the problem is with them all, including the original xiaomi charger that came with the phone.
Also, the touch problems sometimes happens with no reason at all, or sometimes when low battery percentage, so i dont think using different charger will solve the problem
Hartabarta1 said:
I have 3 chargers, the problem is with them all, including the original xiaomi charger that came with the phone.
Also, the touch problems sometimes happens with no reason at all, or sometimes when low battery percentage, so i dont think using different charger will solve the problem
Click to expand...
Click to collapse
Phone might be defected ....
Its new right?
Get another one
Sent from my MI 5 using Tapatalk
SaumyeMehrotra96 said:
Phone might be defected ....
Its new right?
Get another one
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
What do you mean ?
I have no warranty so i cant go get another one.
Hartabarta1 said:
What do you mean ?
I have no warranty so i cant go get another one.
Click to expand...
Click to collapse
Well i don't have any other ideas...
Good luck.
Sent from my MI 5 using Tapatalk
SaumyeMehrotra96 said:
Well i don't have any other ideas...
Good luck.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Okay thanks for trying.
Anyone else?
1. Try to update the rom (stable / developer) to last version.
2. Had the same problem at work. in my case the socket itself was the problem. Just try another one.
SN22 said:
1. Try to update the rom (stable / developer) to last version.
2. Had the same problem at work. in my case the socket itself was the problem. Just try another one.
Click to expand...
Click to collapse
1. I am using the latest version of my stable rom
2. What do you mean by 'socket' ? How do i fix this problem?
By socket i mean the holes in the wall where you plug your charger in.
About the rom be sure its not fake rom.
(whenever i get any new device i flash rom by myself. Especially if i got from China)
But it also can be a bug so check miui forums.
(I don't use miui)
SN22 said:
By socket i mean the holes in the wall where you plug your charger in.
About the rom be sure its not fake rom.
(whenever i get any new device i flash rom by myself. Especially if i got from China)
But it also can be a bug so check miui forums.
(I don't use miui)
Click to expand...
Click to collapse
No the socket is fine and the problem appears in different sockets too.
Btw you are using xiaomi device without miui?
What rom then? And how did u do it?
Ok so I can only say this: touch issues while charging usually means a problem with voltage so check : socket / charger / cable.
To install different rom u need to unlock your bootloader (google it).
Then install TWRP (Guide is in TWRP page)
And that's it you're ready to go.
I use "JDCTeam AOSP" for the moment.
It's smooth and stable and most important clean Android.
I think its better than LOS for now
SN22 said:
Ok so I can only say this: touch issues while charging usually means a problem with voltage so check : socket / charger / cable.
To install different rom u need to unlock your bootloader (google it).
Then install TWRP (Guide is in TWRP page)
And that's it you're ready to go.
I use "JDCTeam AOSP" for the moment.
It's smooth and stable and most important clean Android.
I think its better than LOS for now
Click to expand...
Click to collapse
The rom flashing is from the TWRP?
you copy the rom and install it through the twrp?
Do you switch rom alot?
And what is LOS?
Sorry for all the question as i said i am not developer or something I'm just regular xiaomi user
And btw, what about the volume problem? Can you advise any solution to it?
Yes the rom flash is from TWRP.
Just choose the rom you want and follow OP instructions.
LOS is the successor of CM. You should check development section.
The volume if its not rom related ir could be hardware related. The 3.5mm jack can be bent or something like that. Try other headphones
SN22 said:
Yes the rom flash is from TWRP.
Just choose the rom you want and follow OP instructions.
LOS is the successor of CM. You should check development section.
The volume if its not rom related ir could be hardware related. The 3.5mm jack can be bent or something like that. Try other headphones
Click to expand...
Click to collapse
The volume problem is very popular on xiaomi mi5 and i saw a topic that the user solved the volume problem by flashing Chinese rom
What is the differences between Chinese and global rom?
And do i need to root my device in order to flash different rom such as official chinese or jdc?
Help anyone??
I was thinking about flashing to European rom or to LOS which is better?
Miflash gives me unspecified error (0xfffff)
When im trying to downgrade to 8.1 in order to flash TWRP
Hartabarta1 said:
Help anyone??
I was thinking about flashing to European rom or to LOS which is better?
Miflash gives me unspecified error (0xfffff)
When im trying to downgrade to 8.1 in order to flash TWRP
Click to expand...
Click to collapse
I dont think you need 8.1 to flash twrp..
I was on 8.2 when i did it...
Flash aosp by jdc team if you dont need features ... Its super stable
Unlock bootloader first
Sent from my MI 5 using Tapatalk
SaumyeMehrotra96 said:
I dont think you need 8.1 to flash twrp..
I was on 8.2 when i did it...
Flash aosp by jdc team if you dont need features ... Its super stable
Unlock bootloader first
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
my bootloader is unlocked
but i see on internet people get brick when trying to install twrp on miui 8.2
can u guide me throught the twrp installation if i do it on miui 8.2?
Hartabarta1 said:
my bootloader is unlocked
but i see on internet people get brick when trying to install twrp on miui 8.2
can u guide me throught the twrp installation if i do it on miui 8.2?
Click to expand...
Click to collapse
I never heard of people getting bricked phone on 8.2....
Follow the instructions on the twrp website and ask anythjng you want
Sent from my MI 5 using Tapatalk
SaumyeMehrotra96 said:
I never heard of people getting bricked phone on 8.2....
Follow the instructions on the twrp website and ask anythjng you want
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Ok i unlock bootloader, install twrp and move the LOS file into the device memory but when i press install from the twrp recovery i get ERROR 7
SOLUTION?
Related
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
mbc0 said:
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
Click to expand...
Click to collapse
Have you tried a new cable?
Sent from my Nexus 7 using Tapatalk 2
And, in truth, if it's a hardware failure, rooted or not shouldn't matter.
One of the first diagnostics that they generally do is nvflash a stock image to eliminate software as an issue.
danvee said:
And, in truth, if it's a hardware failure, rooted or not shouldn't matter.
One of the first diagnostics that they generally do is nvflash a stock image to eliminate software as an issue.
Click to expand...
Click to collapse
Thanks for the replies, I am worried that they will see it is rooted and then charge me full price for a replacement!
And as for cables I have got 3 Nexus 7's and it is only this one that has the problem (the one that has been on the car charger)
Is there really no way of making this absolutely clean stock before I send back?
Many Thanks
mbc0 said:
Thanks for the replies, I am worried that they will see it is rooted and then charge me full price for a replacement!
And as for cables I have got 3 Nexus 7's and it is only this one that has the problem (the one that has been on the car charger)
Is there really no way of making this absolutely clean stock before I send back?
Many Thanks
Click to expand...
Click to collapse
Its a Nexus Device... When manufacturers put that tag on a device they know many people will but it to modify its software... I sent my first nexus Back with a very non stock rom on it because of the screen issue. It came back fixed with the same os on it . This was sent to Asus ..
If you have opened it or modified it physically in any way they will charge you. If its a software issue they prob will not but have a right to charge you..
but you can get back to stop.. D/load the stock image from google. to the device boot into cwm and flash it.. You will now be stock.You can then d/load stock recovery and flash that with cwm. So recovery will be stock..
Call ASUS To confirm about the above. they are quite open to talk to you .
Good Luck
mbc0 said:
Hi,
It would seem that after 3-4 months of using a car charger has killed my charging/sync capabilities of my Nexus 7 3G It will only charge from mains power/usb power when switched completely off but as soon as the device is booted it does not charge. As I can no longer use the usb connection I am unable to load the stock rom using the tool kit I loaded this flashable zip so I can RMA the device
http://forum.xda-developers.com/showthread.php?t=2377685&page=1
Although the ROM appears to work fine (Still have the sync/charge issue though) and according to the "About Tablet" info everything appears to be stock, however if I enter recover mode with the power/volume down button I am presented with Clockwork Mod Recovery Menu which I would obviously need to remove somehow?
Can anyone please offer any advice on how I can do this to enable me to send the unit back for an RMA?
Many Thanks
Click to expand...
Click to collapse
Does your computer not see it in fastboot mode?
Bongobiker said:
Does your computer not see it in fastboot mode?
Click to expand...
Click to collapse
His USB port is a goner, read the OP...
Beamed from my Maguro
Mach3.2 said:
His USB port is a goner, read the OP...
Beamed from my Maguro
Click to expand...
Click to collapse
Obviously not if it charges his device. Read the OP..!
Another option is to pay ~$70 to a repair shop for them to order a new micro USB/3.5mm module and replace it.
adoweeti Dut
Hi,
This appears to be a software issue as the port will allow usb/mains charge when powered off but not when powered on, (alot of reports from other users on this after using Amazon cigarette lighter chargers like me! ) the cables/chargers have all been changed and the port itself seems fine and has never been damaged in any way but sadly I cannot use fastboot due to the USB connection issues...
Just trying to find a way to completely stock the device before sending back
erica_renee said:
Its a Nexus Device... When manufacturers put that tag on a device they know many people will but it to modify its software... I sent my first nexus Back with a very non stock rom on it because of the screen issue. It came back fixed with the same os on it . This was sent to Asus ..
If you have opened it or modified it physically in any way they will charge you. If its a software issue they prob will not but have a right to charge you..
but you can get back to stop.. D/load the stock image from google. to the device boot into cwm and flash it.. You will now be stock.You can then d/load stock recovery and flash that with cwm. So recovery will be stock..
Call ASUS To confirm about the above. they are quite open to talk to you .
Good Luck
Click to expand...
Click to collapse
Hi,
Thanks for that info, I would prefer to send back stock just to cover all bases!
I have the original stock rom from google but it is in TGZ format and I thought I could only flash ZIP format with side loading? where would I put the Standard ROM TGZ File on the device to load with CWM?
Many Thanks
The tgz format is a compressed container like zip. You can upcompress it, and I think uncompress something inside it again you will eventually see .img files that you can you to go back to stock
Sent from my Nexus 7 using XDA Premium HD app
djdunn said:
The tgz format is a compressed container like zip. You can upcompress it, and I think uncompress something inside it again you will eventually see .img files that you can you to go back to stock
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Hi,
I can see the IMG file inside the TGZ File, but how do I get to Nexus to load that?
Many Thanks
Unfortunately the only way I know how to flash recovery is with fastboot
djdunn said:
Unfortunately the only way I know how to flash recovery is with fastboot
Click to expand...
Click to collapse
That's what I thought... Thanks anyhow!
mbc0 said:
That's what I thought... Thanks anyhow!
Click to expand...
Click to collapse
Thing is.... with an OTA update, the Nexus reboots and installs without any USB connection, I would have thought it would have been possible to reproduce that?
wifi
what about over wifi
me2u2 said:
what about over wifi
Click to expand...
Click to collapse
That would be great if I could find a way!
Dear Friends,
since i press wipe data after update fail, my phone is looping on mi icon. my bootloader is locked and i cant Enable USB Debugging since i cant accese my phone.
i tryed mi flash tool wont work also MiPCSuite wont recognise miflash_unlock saying my account is not bound to the phone
i am looking for any kind of help (exept opening the phone i am affrid to damage it).
Best regards,
Mor Nixon
hey man
i have an answer for you(me)
i saw the lite and jesus came to me after seeing me suffering the last few weeks
test point worked only with a wierd specific mi flash i found something that i think stimulate 64 bit
after that i had problems with google store services, itried endlessly but couldnt go on no more
i install twrp and flash eu miui unofficial and right now its showing me good sign (hope it will stay that way)
until next time man..
morzniks said:
hey man
i have an answer for you(me)
i saw the lite and jesus came to me after seeing me suffering the last few weeks
test point worked only with a wierd specific mi flash i found something that i think stimulate 64 bit
after that i had problems with google store services, itried endlessly but couldnt go on no more
i install twrp and flash eu miui unofficial and right now its showing me good sign (hope it will stay that way)
until next time man..
Click to expand...
Click to collapse
Great.. you're your own savior. Nice to see ya
__PG__ said:
Great.. you're your own savior. Nice to see ya
Click to expand...
Click to collapse
i was so happy about it
until ...
the phone keeps having random crashes...... bHAaaaaa
and i tried many global stable custom roms X_X
ill start praying for a new god
morzniks said:
i was so happy about it
until ...
the phone keeps having random crashes...... bHAaaaaa
and i tried many global stable custom roms X_X
ill start praying for a new god
Click to expand...
Click to collapse
Maybe it's due to a specific app.
Unlock bootloader then Flash Any Custom rom. Or flash MIUI via Fastboot method and check the crash. Most probably you have done a Dirty flash instead of Clean flash.
Wipe data/system/cache/dalvik then flash your ROM for a Bugless experience :highfive:
i did Clean flash in all of tham.
ill just try to go for the bes custom rom that is simple. im not looking for customisation at all, just want the phone to work with minimum features, stable...
if you know witch is the rom for me that could help :]
im now going to check who crash less frequently
cuse miui reboot sometime 4 times in 1 minute
Can you tell me what you did? Also was your internal storage intact or was erased? Because I am also having the same issue.
girishpai said:
Can you tell me what you did? Also was your internal storage intact or was erased? Because I am also having the same issue.
Click to expand...
Click to collapse
i opened the back of the phone and touched the test point 2 dots
then i connect to the computer and i was able to flash miui official rom (any one i wanted)
Recently I noticed that my MI A2 couldn't connect to PC in MTP to backup some photos. This didn't happened before because I was successfully flash Havoc OS and did backup photos several times ago.
I also tried to connect my phone while in TWRP but it didn't detected in Windows. I checked Device Manager while trying to connect the phone to PC there is no Android Phone device popped up like usual.
What I have tried:
- Re-flash the ROM (didn't work)
- Change the cable (didn't work even with the original cable included with the phone)
- Change to other PC (didn't work)
- Enable USB debugging (didn't work)
Additional Note:
- MIA2 in HavocOS 2.8 latest build [Android Pie]
- Windows 10 Build 1903 latest update
- Xiaomi Driver is installed as I frequently flashing my phone.
- Somehow Headphone still working using Type-C Adapter to 3.5mm
UPDATE (5/1/2021)
Hi All,
Just want to give you quick update on what happened to my MI A2 at the moment.
After looking for a fix in several month and no solution found at all, I bought a new port connector.
I tried to swapped the port myself but the problem still exist with the new port.
I even tried to use port connector for Redmi 6X (its similar but have a slight different) and yet the problem still there.
My final conclusion that this problem may be located on its mainboard. Now I have change my phone to Mi 9T Pro and put the MI A2 on my desk drawer. The phone still works and charging normally but I can't use it for work because I need it to able connect to PC.
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
egantz09 said:
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
Click to expand...
Click to collapse
I just noticed this recently. The weird part is the headphone still works using adapter type-C to 3.5mm so I doubt it was physical problem with the port more like software thing.
same too
mark.dx said:
Recently I noticed that my MI A2 couldn't connect to PC in MTP to backup some photos. This didn't happened before because I was successfully flash Havoc OS and did backup photos several times ago.
I also tried to connect my phone while in TWRP but it didn't detected in Windows. I checked Device Manager while trying to connect the phone to PC there is no Android Phone device popped up like usual.
What I have tried:
- Re-flash the ROM (didn't work)
- Change the cable (didn't work even with the original cable included with the phone)
- Change to other PC (didn't work)
- Enable USB debugging (didn't work)
I suspect it may have something to do with the firmware but I haven't find any solution for this. Hope somebody can give me some suggestion about it.
Additional Note:
- MIA2 in HavocOS 2.8 latest build [Android Pie]
- Windows 10 Build 1903 latest update
- Xiaomi Driver is installed as I frequently flashing my phone.
- Somehow Headphone still working using Type-C Adapter to 3.5mm
Click to expand...
Click to collapse
i got same issue, its after update with build v10.0.13. before that version usb working fine, when i attach usb cable its can show usb option. now its only show grey (all disable). i think its bug in rom
I had this issue as well but after trying other ports it worked for me. The strange thing is that, the previous known failed ports will always not allow me to use MTP after PC reboots.
My PC is a Ryzen build if that of any help. I do not face this issue with my laptop which is an Intel build.
TechnoSparks said:
I had this issue as well but after trying other ports it worked for me. The strange thing is that, the previous known failed ports will always not allow me to use MTP after PC reboots.
My PC is a Ryzen build if that of any help. I do not face this issue with my laptop which is an Intel build.
Click to expand...
Click to collapse
My PC is also Ryzen but it wont detect in any port, also in my old laptop which is USB Port 2.0 and have Intel processor didn't work either like it used to be.
mark.dx said:
My PC is also Ryzen but it wont detect in any port, also in my old laptop which is USB Port 2.0 and have Intel processor didn't work either like it used to be.
Click to expand...
Click to collapse
I think it is worth trying to connect USB OTG and see if it works. I am curious about it.
It may also be possible that your ROM or maybe something along the way have made this issue. But hey this is just a guess. I am just as clueless [emoji853]
Maybe i would try
• Flash stock partitions except boot & system
• Format Data
• Revert back to stock (not really a [desirable] solution)
TechnoSparks said:
I think it is worth trying to connect USB OTG and see if it works. I am curious about it.
It may also be possible that your ROM or maybe something along the way have made this issue. But hey this is just a guess. I am just as clueless [emoji853]
Maybe i would try
• Flash stock partitions except boot & system
• Format Data
• Revert back to stock (not really a [desirable] solution)
Click to expand...
Click to collapse
I can't do flash at moment because I need to make backup in case of failure. This is my daily driver phone so there is important messages, photos etc.
egantz09 said:
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
Click to expand...
Click to collapse
The problem ia in the main board i used to bring my device to service centwr they change main board, if u noticed qc charger is not working and otg didnt qork as well
Shotg1 said:
The problem ia in the main board i used to bring my device to service centwr they change main board, if u noticed qc charger is not working and otg didnt qork as well
Click to expand...
Click to collapse
Slightly off-topic, does locking the BL and flash the stock ROM enough for the warranty to be "valid"?
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
mark.dx said:
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
Click to expand...
Click to collapse
Its issue of main board
mark.dx said:
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
Click to expand...
Click to collapse
Did you already clean your usb port?
You can carefully do that with a toothpick or something.
Sounds a little silly, but really there could be a lot of dirt in there. Resolved many connection and charging issues that way already.
Phil_Smith said:
Did you already clean your usb port?
You can carefully do that with a toothpick or something.
Sounds a little silly, but really there could be a lot of dirt in there. Resolved many connection and charging issues that way already.
Click to expand...
Click to collapse
Hi thanks for the suggestion but the port look clean to me. I borrowed my brother Pocophone charger somehow it keeps on off with the charge, but when i used mine its fine
It is not a hardware issue it is a kernel issue...upon boot a "chargeonlymode" file is created in sbin folder... I am a rookie at this but after a month of digging, 2 mia2's and 4 charger modules later, something is focing our phone into chargeonlymode. If i can find the solution I will post it
sparkplug619 said:
It is not a hardware issue it is a kernel issue...upon boot a "chargeonlymode" file is created in sbin folder... I am a rookie at this but after a month of digging, 2 mia2's and 4 charger modules later, something is focing our phone into chargeonlymode. If i can find the solution I will post it
Click to expand...
Click to collapse
I'm thinking to flash Hex Kernel to my phone but I still afraid it will bootloop.
Have you been able to solve the problem?
The same thing happens on my MI MIX 2S.
kof97 said:
Have you been able to solve the problem?
The same thing happens on my MI MIX 2S.
Click to expand...
Click to collapse
Hi, unfortunately no up until now.
I'm still using my phone just fine though but I still cannot connect it to PC.
I have the same problem but the file transfer works and the charge does not, I can't get back to stock because arb4 is active now is a mi 6x
So have I done something that apparently no one else has on XDA.
Hard bricked my Mi9?
I have heard that you cannot go back from Miui 11 to Miui 10 on China based models or try an install a rom with a locked bootloader.
None of those things are the case here as this is a global Mi9 purchased within New Zealand.
None of the usual tricks work. No battery light black screen no input response from buttons.
Appears like a total hard brick an I have no idea why. Does anyone have any suggestions or experience with hard bricked Mi9s that have bricked for no reason after I did standard things an the bootloader was unlocked?
Bryceicle1971 said:
So have I done something that apparently no one else has on XDA.
Hard bricked my Mi9?
I have heard that you cannot go back from Miui 11 to Miui 10 on China based models or try an install a rom with a locked bootloader.
None of those things are the case here as this is a global Mi9 purchased within New Zealand.
None of the usual tricks work. No battery light black screen no input response from buttons.
Appears like a total hard brick an I have no idea why. Does anyone have any suggestions or experience with hard bricked Mi9s that have bricked for no reason after I did standard things an the bootloader was unlocked?
Click to expand...
Click to collapse
The same thing happened to my Mi 9. It wont turn on or charge. Absolutely nothing.
Did you manage to fix it?
juanpard said:
The same thing happened to my Mi 9. It wont turn on or charge. Absolutely nothing.
Did you manage to fix it?
Click to expand...
Click to collapse
Now its time to fix the hard brick.
Charge your phone for 30-40 minute. No problem if it doesn't show.
On your laptop or PC
Go to this site and download the stock firmware and mi 9 flash tool
And adb driver too
Then connect to PC
And do what ever mentioned there
https://www.getdroidtips.com/xiaomi-mi-9-stock-firmware/
Sent from my [device_name] using XDA-Developers Legacy app
PrashannaGP said:
Now its time to fix the hard brick.
Charge your phone for 30-40 minute. No problem if it doesn't show.
On your laptop or PC
Go to this site and download the stock firmware and mi 9 flash tool
And adb driver too
Then connect to PC
And do what ever mentioned there
https://www.getdroidtips.com/xiaomi-mi-9-stock-firmware/
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hi, thank you for your reply. I can't follow those directions because i can't put my phone in fastboot or recovery mode since it doesn't respond to any combinations of buttons.
juanpard said:
The same thing happened to my Mi 9. It wont turn on or charge. Absolutely nothing.
Did you manage to fix it?
Click to expand...
Click to collapse
No. No luck with my Mi9. And now ive bricked my Redmi note 8 pro.
Looking at the redmi note 8. Easier to flash an mod an not so costly to replace lol.
Not as power ful as other cells but has many roms already. Around $360NZD. the Redmi note 8 pro was $502 an my Mi9 origionally was $860.
I dont need a flagship. Just something good that I can change to suit myself.
juanpard said:
Hi, thank you for your reply. I can't follow those directions because i can't put my phone in fastboot or recovery mode since it doesn't respond to any combinations of buttons.
Click to expand...
Click to collapse
You don't need any thing no button required just follow the steps
Sent from my [device_name] using XDA-Developers Legacy app
PrashannaGP said:
You don't need any thing no button required just follow the steps
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hi, I am following the steps and one of them is to put the phone in fastboot mode. And I cant do that.
FIXED the dead problem for hard for someone
juanpard said:
Hi, I am following the steps and one of them is to put the phone in fastboot mode. And I cant do that.
Click to expand...
Click to collapse
Watch this tutorial from 2:13 minute to do following things..
youtube tutorial
just remove the back cover of the phone
remove the connection of the battery
then connect the phone to the usb cable and to the pc
the downloaded MI flash tool will now show your device
just click on install/download on flash tool.
connect the battery Now
reboot after charging. :good: :good:
My ROG phone 3 doesnt get detected by adb or fastboot command once it goes into the fastboot mode. My bootloader is unlocked what do i do.
What did u flash? Did u flash something that bad that it bricked your phone?
Didn't flash anything I simply ADB rebooted to bootloader then it stopped working
kartikhm said:
What did u flash? Did u flash something that bad that it bricked your phone?
Click to expand...
Click to collapse
Didn't flash anything. It was already like that the instant I restarted my bootloader
My phone is WW_17.0823.2012.122 is it possible to unbrick my softbricked device? Without flashboot mode
Are you using the side usb port? Only that works for fastboot.
tuxing said:
Are you using the side usb port? Only that works for fastboot.
Click to expand...
Click to collapse
Dont have the side port
Sooo my phone is unrootable because there isnt a side port???.....
There will be a side port if it's Rog 3. It's difficult to make out at first, as it is covered snugly with a rubber cover. Here's a pic with the side port cover removed.
Yrmx said:
Dont have the side port
Click to expand...
Click to collapse
How can this possible?
Every rog 3 variant has side port...
Check ADB drivers or if ur PC is running on AMD search how to fix fastboot
sendme2pop said:
How can this possible?
Every rog 3 variant has side port...
Click to expand...
Click to collapse
Not true. The Tencent version, the side port is covered and doesn't work. I too am having this problem and have tried literally everything I know of and I can't get it to work. I'm gonna try to use Magisk and root it, then use a flashing app to see if I can flash TWRP and then try to change from CN firmware to Global.......
KilaWatts said:
Not true. The Tencent version, the side port is covered and doesn't work. I too am having this problem and have tried literally everything I know of and I can't get it to work. I'm gonna try to use Magisk and root it, then use a flashing app to see if I can flash TWRP and then try to change from CN firmware to Global.......
Click to expand...
Click to collapse
I have a Tencent version.
The side port is covered with a removable soft cover just like every other ROG 3 phone. There is no design difference in this regard between the ROG 3 variants.
elmor0 said:
I have a Tencent version.
The side port is covered with a removable soft cover just like every other ROG 3 phone. There is no design difference in this regard between the ROG 3 variants.
Click to expand...
Click to collapse
Yep, I stand corrected.....I actually got back on here to say I was wrong but you beat me to it. The place I bought it from told me that, and that it was the reason the aero fan didn't come with it! Then when I checked online, I had to see the only damn site with a chart that said the same thing (a Malaysian site)......after checking some others (because this cost me a LOT of time, and I wasn't happy lol) no other site I checked said there was any difference there. I found out because after exhausting every possible thing, I tried connecting the USB to the side one. Using a standard cable, it still didn't work. Then I tried it with the included cable eventually, and lo and behold.....fastboot recognized it and I was able to flash the latest WW version, flash TWRP, Magisk and root it, change the fingerprint, no problems. I had a hell of a time with drivers as for some reason most didn't work and I had to update it eventually, while it was still connected with the one from Google. Only way it would work and had to do it every time I connected. Glad that's over with lol. Cheers! Kila