Hello my cell phone, has the C900 compilation and has android 6, I would like to know how to go to the C432 compilation?
Thaks!
I have C900 too. There's a way to change I think but the C432 updates, if you download them and install manually, are compatible. It's how I've been updating my phone ever since I bought it. I have installed B380 update currently. There's a newer one but some folks are having trouble with it so I haven't updated yet.
Terminus124 said:
I have C900 too. There's a way to change I think but the C432 updates, if you download them and install manually, are compatible. It's how I've been updating my phone ever since I bought it. I have installed B380 update currently. There's a newer one but some folks are having trouble with it so I haven't updated yet.
Click to expand...
Click to collapse
Yes, but what is the way it changes from c900 to c432, thanks
Related
Are there anyone who installed the new OS version starting from a C900 rom? I tried flasing C432B322 from C900B166 via dload method and it failed at 37%! Any tip or suggest? thx.
Can't believe nobody answered your question, i asked a simple question on here before and no reply, so i just answer other people's question instead, i too have C900B181 and have not found the C900 model for the nouget version. Any luck? I should have just updated to the C432 instead.
C900 means its a cross flashed firmware (where the oeminfo and the firmware does not match). I also believe that C900 does not get updates or is the last firmware to get updates.
P.S. People on XDA usually dont answer simple questions that can be found by searching Google or has been mentioned a number of times in the forums and yes, information about C900 has been mentioned a number of times in the P9 forum.
Z-Blade said:
C900 means its a cross flashed firmware (where the oeminfo and the firmware does not match). I also believe that C900 does not get updates or is the last firmware to get updates.
P.S. People on XDA usually dont answer simple questions that can be found by searching Google or has been mentioned a number of times in the forums and yes, information about C900 has been mentioned a number of times in the P9 forum.
Click to expand...
Click to collapse
How would i be able to downgrade to C432 from C900 becuase I'm sure you are right that i wont get any OTA update on C900.
Dre1300 said:
How would i be able to downgrade to C432 from C900 becuase I'm sure you are right that i wont get any OTA update on C900.
Click to expand...
Click to collapse
As mentioned, C900 is a cross-flash version. Your only options are to roll back to the previous/original firmware, or to follow one of the guides to de-brand (which includes steps to match your oeminfo partition to the firmware).
My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?
Aadiisarki said:
My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?
Click to expand...
Click to collapse
you can try using Firmware Finder Free. its available for download it from Play Store
Mine is stuck too not haven't received a single update since I bought it still on emui 4.1 FF is useless it donwloads the update just fine but it always fails on the installation at 1% my build N is VIE-L29C605B131.
Aadiisarki said:
My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?
Click to expand...
Click to collapse
What country/region are you from?
What is the present firmware version B160 dated?
Firmware Finder (FF) (online version) shows B150 as the latest, so FF's probably not going to help you unfortunately: http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L09c627&firmware_page=0
Your only other option may be to convert to another region's ROM, which has received regular updates - e.g. Euro C432 ROM (latest is B382, dated March 2018). But, it's a risky procedure which involves unlocking the bootloader, rooting the phone, changing the vendor country info with SRK Tool, etc, etc.
Coreinsp said:
Mine is stuck too not haven't received a single update since I bought it still on emui 4.1 FF is useless it donwloads the update just fine but it always fails on the installation at 1% my build N is VIE-L29C605B131.
Click to expand...
Click to collapse
Which update did you try? If you're still on 4.1, then you should try a much earlier update (i.e. the very 1st 5.0 update) - I'd recommend one of the B361s from here (or via the FF app): http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L29C605&firmware_page=0
Always download & apply the FullOTA-MF, in this case ~1.3Gb file size.
Once you have installed B361 successfully, try the B381 update (not the latest B382 as it will not work at this stage most likely). Again, download the FullOTA-MF (1.4Gb) & apply it.
GaT7 said:
What country/region are you from?
What is the present firmware version B160 dated?
Firmware Finder (FF) (online version) shows B150 as the latest, so FF's probably not going to help you unfortunately: http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L09c627&firmware_page=0
Your only other option may be to convert to another region's ROM, which has received regular updates - e.g. Euro C432 ROM (latest is B382, dated March 2018). But, it's a risky procedure which involves unlocking the bootloader, rooting the phone, changing the vendor country info with SRK Tool, etc, etc.
Which update did you try? If you're still on 4.1, then you should try a much earlier update (i.e. the very 1st 5.0 update) - I'd recommend one of the B361s from here (or via the FF app): http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L29C605&firmware_page=0
Always download & apply the FullOTA-MF, in this case ~1.3Gb file size.
Once you have installed B361 successfully, try the B381 update (not the latest B382 as it will not work at this stage most likely). Again, download the FullOTA-MF (1.4Gb) & apply it.
Click to expand...
Click to collapse
I tried all of the full OTA on FF all them download just fine but every time the phone restarts to install the update for some reason it fails at 1% of the install.
Sent from my VIE-L29 using Tapatalk
try B202 first
I had an P9+ B130 version and was able to upgrade to B202, which is needed as a stepping stone to MIUI 5. I used FF with the proxy update scheme. The B202 update worked while other versions stopped at verifying the update, which is just what you experienced.
Coreinsp said:
I tried all of the full OTA on FF all them download just fine but every time the phone restarts to install the update for some reason it fails at 1% of the install.
Sent from my VIE-L29 using Tapatalk
Click to expand...
Click to collapse
cjviking said:
I had an P9+ B130 version and was able to upgrade to B202, which is needed as a stepping stone to MIUI 5. I used FF with the proxy update scheme. The B202 update worked while other versions stopped at verifying the update, which is just what you experienced.
Click to expand...
Click to collapse
I'm out of luck then it seems that the B354 update is no longer available on FF which is the "steppingstone" in my case.
Sent from my VIE-L29 using Tapatalk
Same problem here. I'm still on vie-l29c636b103. Any solutions?
Hi,
Does the rebranding process from C782 to C432 still work on FunkyHuawei?
I'm confused as to what firmware I install when I start the rebrand.
My C782 is on. 282
Thanks
I have the same phone. P20 pro c782 EE uk
You resolve this problem or not?
dimxhej said:
You resolve this problem or not?
Click to expand...
Click to collapse
Nope you can't rebrand P20 Pro's via FH
chrissyyyw said:
Nope you can't rebrand P20 Pro's via FH
Click to expand...
Click to collapse
Yes you can. Exactly what I did. From c782 to c432. However the last price I saw for bl unlock code was more than the handsets are worth. And its a pain as you need to be on oreo, it does work on pie so also have to do a rollback
Sent from my CLT-L09 using Tapatalk
If I remember well some people reported last year that they were able to rebrand by simply flashing different service firmware with dload method... it was reported around time when early 9.1 firmware revisions showed up... might work only between certain revisions though...
I have the same problem. Need to rebrand for c782 uk to c432. Clt l09
chrissyyyw said:
Hi,
Does the rebranding process from C782 to C432 still work on FunkyHuawei?
I'm confused as to what firmware I install when I start the rebrand.
My C782 is on. 282
Thanks
Click to expand...
Click to collapse
Need to rebrand for c782 uk to c432. Clt l09
DrLamok said:
If I remember well some people reported last year that they were able to rebrand by simply flashing different service firmware with dload method... it was reported around time when early 9.1 firmware revisions showed up... might work only between certain revisions though...
Click to expand...
Click to collapse
This was a misunderstanding due to Huawei changing the naming structure of firmwares. Lgrp2 covers numerous regions in Europe etc so it wasn't rebranding, just changing the firmware version name.
As for rebranding via fh. You need to be on oreo. Then you Rebrand with the same version number but the c432 version. Then it will automatically update via ota to current 432 version, usually in a few stages
Sent from my CLT-L09 using Tapatalk
Hi,
i've got huawei p20 eml-l29 with c900 region. My bootloader is locked. For now, is there any method to update to android 10? update via OTG, erecovery?
Hello. I have a Huawei P9 EVA DL00, on it EMUI 8.0.0 / Android 8.0.0. Is it possible to port the EMUI 9 firmware from Huawei P10 / Honor 9 or another device to our P9 on it. We have Kirin 955, and on the Huawei P10 / Honor 9 Kirin 960. Who can port?
It's is possible?!
mybe with gsi and erfans scipt
sGSI
different partition table...
P9 Eva l09 android 6.0
Hi everyone!
We are on 2019 lol and my eva-l09 didnt update any More, im stucked at android 6.0.
Any ideas? Im worried if I have to mannualy updated it because i have a bad experience with that.
I had before a gx8, ive mannualy updated the stock rom and like Many others i had no signal, so i did a flash to roll back and my fingerprint sensor stopped working (i couldnt Solve that)
Thanks!
marcod_9 said:
Hi everyone!
We are on 2019 lol and my eva-l09 didnt update any More, im stucked at android 6.0.
Any ideas? Im worried if I have to mannualy updated it because i have a bad experience with that.
I had before a gx8, ive mannualy updated the stock rom and like Many others i had no signal, so i did a flash to roll back and my fingerprint sensor stopped working (i couldnt Solve that)
Thanks!
Click to expand...
Click to collapse
I don't know have you really been originally on that cust c451, or you rebranded to c451 as part of going back to stock / rolling back to MM
Anyway, c451 is a dead end, check on FirmwarFinder or at:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L09c451
you will see that EMUI 4.1, b131/b132 are the last ever firmwares for c451
You need to rebrand to some 'proper' cust like c432 (European), c636, or so, to be able to obtain OTA updates up to EMUI 5, like it was described here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Rebranding to c432 is crucial. If updating to b182 as described there will fail, you should be able to reinstall c432 b182 (or newer c432) by eRecovery, or by flashing service restore c432b182 (but there are no service restores for c451 and no Nougat firmwares for c451)
zgfg said:
I don't know have you really been originally on that cust c451, or you rebranded to c451 as part of going back to stock / rolling back to MM
Anyway, c451 is a dead end, check on FirmwarFinder or at:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L09c451
you will see that EMUI 4.1, b131/b132 are the last ever firmwares for c451
You need to rebrand to some 'proper' cust like c432 (European), c636, or so, to be able to obtain OTA updates up to EMUI 5, like it was described here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Rebranding to c432 is crucial. If updating to b182 as described there will fail, you should be able to reinstall c432 b182 (or newer c432) by eRecovery, or by flashing service restore c432b182 (but there are no service restores for c451 and no Nougat firmwares for c451)
Click to expand...
Click to collapse
Thanks for the reply,
No, ive been originally on c451. I dindt change anything on this device. I bought it at amazon almost 3 years ago, and apparently it was a "telstra" phone, i think from Australia, altought in amazon it said unlocked. Now im using Movistar network in Argentina.
Ok then, the question is, is there any way to know that after rebranding to c432 or another cust my device will work properly? i mean phone signal (the most important thing), camera, fingerprint sensor, etc.
marcod_9 said:
Thanks for the reply,
No, ive been originally on c451. I dindt change anything on this device. I bought it at amazon almost 3 years ago, and apparently it was a "telstra" phone, i think from Australia, altought in amazon it said unlocked. Now im using Movistar network in Argentina.
Ok then, the question is, is there any way to know that after rebranding to c432 or another cust my device will work properly? i mean phone signal (the most important thing), camera, fingerprint sensor, etc.
Click to expand...
Click to collapse
Hardware is always the same, rebranding puts the other cust.
And with cust c432 you should receive OTA updates up to b504/b505
If not, for some reason (then it is possible to force DLOAD or HWOTA updates
Btw, responding you now from L09c432 rebranded to AL10c00 (Chinese), with Oreo b540 (Oreo was released for P9 only in China) and with some adaptations (Chinese firmwares are specific), everything works ok.
If you search throughout XDA, you will find many users (for all kinds of Huawei models) rebrand here and there, usually to c432 or c636 since they obtain faster and more updates (except for Chinese AL10, AL00, DL10 and alike that get first and farthest OTA updates, but Chinese firmwares require adaptations to become useful worldwide: bloatware, missing GApps, missing intl languages and configurations for intl carriers, and so)
Btw, didn't you previously say that you returned to stock (from custom ROM?) - in that case you must have Bootloader code (for rebranding you need to start with the unlocked Bootloader - have also OEM/FRP unlocked)
Edit: Btw, this is a wrong thread for discussing the update of stock MM firmware to Nougat
zgfg said:
Hardware is always the same, rebranding puts the other cust.
And with cust c432 you should receive OTA updates up to b504/b505
If not, for some reason (then it is possible to force DLOAD or HWOTA updates
Btw, responding you now from L09c432 rebranded to AL10c00 (Chinese), with Oreo b540 (Oreo was released for P9 only in China) and with some adaptations (Chinese firmwares are specific), everything works ok.
If you search throughout XDA, you will find many users (for all kinds of Huawei models) rebrand here and there, usually to c432 or c636 since they obtain faster and more updates (except for Chinese AL10, AL00, DL10 and alike that get first and farthest OTA updates, but Chinese firmwares require adaptations to become useful worldwide: bloatware, missing GApps, missing intl languages and configurations for intl carriers, and so)
Btw, didn't you previously say that you returned to stock (from custom ROM?) - in that case you must have Bootloader code (for rebranding you need to start with the unlocked Bootloader - have also OEM/FRP unlocked)
Click to expand...
Click to collapse
OK thank you! iwill do it
no, i was telling what happened with a previous device, gx8.
Hello guys,
Quick question. Does anybody know where to get official 9.1 OR 10.0 firmware for C605 phones? My current version shows 9.0.0.263 (C605E2R1P11). I'm using my phone with MINT mobile. No OTA updates available...
Modded hisuite and huawei firmware finder
EMUI 10 for P20 Pro was not released globally yet.
Stupid question, do you have an active SIM in the phone? Initial OTA might not arrive without a SIM.
Also, I can suggest using HiSuite on a PC, it also can find new versions when you don't see OTA.
Yes, I have active SIM in my phone. But nothing happens OTA. As far as HiSuite goes, I tried a regular (non modified) version and also no updates found.
I was wondering if there are users with C605 region that have 9.1 firmware installed and how/where did they get it. I know there are some web resources that host firmware but I'm skeptical to use them without references...
The EMUI 10 you see on firmware finder is only for india region
Luis2k33-XDA said:
Modded hisuite and huawei firmware finder
Click to expand...
Click to collapse
Can somebody tell how exactly this method is used? I found the modded Hisuite and installed it and replaced files. But got No internet error. Also, not completely understanding how the FF is used along with Hisuite for installation. Thanks.
juzzie said:
Can somebody tell how exactly this method is used? I found the modded Hisuite and installed it and replaced files. But got No internet error. Also, not completely understanding how the FF is used along with Hisuite for installation. Thanks.
Click to expand...
Click to collapse
You can rebramd your phone to other region ex. Europe C432. and than you will recieve update.
Find tutorial on this forum how to rebrand region on Huawei phones.
Sent from my EML-L29 using Tapatalk