I am running a Verizon Moto X still on 4.2.2. I am rooted. This is NOT the Dev edition. I have plenty of experience with rooting/flashing these phones so back when I first got it the directions on rooting/flashing roms was VERY vague. No one specified you needed the Dev edition to unlock the boot loader. Well I think this came from at one point when I tried to flash TWRP (maybe). Either way, I want to take the OTA update and cannot. Does anyone know how to fix this without doing the RSD, reflash stock method? Here is a picture of what it looks like (thanks for your help in advance):
You should check out the 'Chinese Middleman' thread. If you get the bootloader unlocked you should be able to fix anything.
I can't unlock the bootloader since this is not a Dev edition. Unless something has changed, I'll check it.
You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk
shamelin73 said:
You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Even though it's not a Dev edition?
Yes you should be able too.
Sent from my XT1053 using Tapatalk
danman421 said:
Even though it's not a Dev edition?
Click to expand...
Click to collapse
All XT1053s can be unlocked, yes. Additionally, if you follow my advice, you don't NEED to unlock. If one of the commands fails, simply skip to the next as I previously advised, and TRY flashing with RSD Lite after you have run the commands I listed.
If you want to check and make sure fastboot is working, type:
fastboot devices
if you see your phone and it's serial number listed, you fastboot IS properly communicating with your phone.
You do not need to unlock your BL to do any of this...but if you are interested in ROOTING, you will need to.
All I really want to do is make it so my phone can take the update and any future updates. What do you mean as you previously stated?
shamelin73 said:
You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
I tried this as I did before and I get "your device does not qualify for bootloader unlocking". All I need to know is how to fix this from someone.
danman421 said:
All I really want to do is make it so my phone can take the update and any future updates. What do you mean as you previously stated?
Click to expand...
Click to collapse
I confused you with a member I had helped previously - sorry. Please disregard the "previously stated" comment.
danman421 said:
I tried this as I did before and I get "your device does not qualify for bootloader unlocking". All I need to know is how to fix this from someone.
Click to expand...
Click to collapse
It does NOT require unlocking the bootloader to flash your carrier's correct ROM. Simply follow the instructions in the "Return to 100% Stock" thread to flash the XT1053 ROM, and you'll be able to take all future updates.
If you DO unlock the bootloader, flash custom recovery, and root your device, you will have to un-do any modifications made before EVERY OTA. If you don't care about root, don't worry about unlocking.
Additionally, if you DO want to unlock, you could try a different browser and make sure you are inputting the unlock data correctly. It is recommended that you copy the unlock data from the command prompt to notepad, remove all spaces and bootloader messages (you ONLY want the code - as one complete string), then copy from notepad into the Unlock website.
And finally, keep in mind that unless you unlock your BL, you will not be able to root and disable write-protect once you update to the latest version.
The real problem here is that you use an "Exploit" to root your device previously. Now you need to return to full stock to restore your partitions to their factory state.
Simply follow the instructions in the Return to stock thread (in general sub-forum), and be sure to flash the LATEST version for your carrier. It should be 4.4.3.
Good Luck.
samwathegreat said:
I confused you with a member I had helped previously - sorry. Please disregard the "previously stated" comment.
It does NOT require unlocking the bootloader to flash your carrier's correct ROM. Simply follow the instructions in the "Return to 100% Stock" thread to flash the XT1053 ROM, and you'll be able to take all future updates.
If you DO unlock the bootloader, flash custom recovery, and root your device, you will have to un-do any modifications made before EVERY OTA. If you don't care about root, don't worry about unlocking.
Additionally, if you DO want to unlock, you could try a different browser and make sure you are inputting the unlock data correctly. It is recommended that you copy the unlock data from the command prompt to notepad, remove all spaces and bootloader messages (you ONLY want the code - as one complete string), then copy from notepad into the Unlock website.
And finally, keep in mind that unless you unlock your BL, you will not be able to root and disable write-protect once you update to the latest version.
The real problem here is that you use an "Exploit" to root your device previously. Now you need to return to full stock to restore your partitions to their factory state.
Simply follow the instructions in the Return to stock thread (in general sub-forum), and be sure to flash the LATEST version for your carrier. It should be 4.4.3.
Good Luck.
Click to expand...
Click to collapse
So if I am reading this correctly, there is no way to keep all of my data and take the update?
danman421 said:
So if I am reading this correctly, there is no way to keep all of my data and take the update?
Click to expand...
Click to collapse
You can attempt to, by either editing the XML in the SBF and removing the line that says "erase userdata", or by skipping the erase userdata if you use the manual method, but either way CAN mess everything up.
You used an EXPLOIT previously. Any time you use an exploit, you should -expect- to have to wipe everything and re-install from scratch if you want to get back to stock in order to be able to take updates. Keep this in mind if you use any exploits in the future.
Hi! This hasn't seemed to spelled out yet..... But many Moto x's can be unlocked, not just dev editions. However, you stated in the opening post that you have a Verizon Non dev, which can not be unlocked. Only way is to pay the "China middleman" (See thread in general with that name).
And personally.... I would stay on 4.2.2 and do the Slapmymoto method to get root and write protection disabled. That is the best root scenario, aside from unlocking the bootloader.
If you update to 4.4.2 or higher, you will have write protection enabled always, and no root, or sorta root with towelroot and pie. But that will limit what you can do.
See the How do I root my phone sticky thread in general for your options.
I should have posted earlier. I ran RSDLite and put the newest version on. I am unrooted. My Moto X is a Sept '13 version the the middleman probably wont work anyways. Its not worth it with this phone, im tired of the rooting, I guess im at that point in my life... Thanks for all your help though guys!
danman421 said:
I am running a Verizon Moto X still on 4.2.2. I am rooted. This is NOT the Dev edition. I have plenty of experience with rooting/flashing these phones so back when I first got it the directions on rooting/flashing roms was VERY vague. No one specified you needed the Dev edition to unlock the boot loader. Well I think this came from at one point when I tried to flash TWRP (maybe). Either way, I want to take the OTA update and cannot. Does anyone know how to fix this without doing the RSD, reflash stock method? Here is a picture of what it looks like (thanks for your help in advance):
Click to expand...
Click to collapse
Pardon my jumping in here late but..
I see a big issue here.
Based on that screen shot, you have boot loader 30.B4, that is NOT the bootloader that comes wtih 4.2.2. Did you mean to type 4.4.2? or do you really have 4.2.2 on there?
If you really had 4.2.2 on your phone with a 30.B4 bootloader, then you had 4.4.2 on there at one point, and downgraded!! You need to be REALLY CAREFUL or you will brick your phone.
You are correct, I was on 4.4.2. My wife's S4 that I just upgraded was on 4.2.2. Sorry for the confusion.
KidJoe said:
Pardon my jumping in here late but..
I see a big issue here.
Based on that screen shot, you have boot loader 30.B4, that is NOT the bootloader that comes wtih 4.2.2. Did you mean to type 4.4.2? or do you really have 4.2.2 on there?
If you really had 4.2.2 on your phone with a 30.B4 bootloader, then you had 4.4.2 on there at one point, and downgraded!! You need to be REALLY CAREFUL or you will brick your phone.
Click to expand...
Click to collapse
Good catch! ?
OP... Perhaps full disclosure of what you have done on the phone would help.
Or is that how it was?
If it's been downgraded to 4.2.2 after being on 4.4.2... As said above.... You could brick now... Especially if you OTA.
I'd tread lightly at this point.
danman421 said:
You are correct, I was on 4.4.2. My wife's S4 that I just upgraded was on 4.2.2. Sorry for the confusion.
Click to expand...
Click to collapse
so based on post # 14 of this post... it appears you are all good now? is that the case? Or do you still need help?
Oh, and if your bootloader is locked (Verizon non-DE), you can't get code from China Middle man, and you are on 4.4.2, you could try TowelPieRoot for rooting, but write protection is enabled so it will be kind of limited (compared to SlapMyMoto/MotoWPNoMO or if you had an unlocked bootloader), and there is no root for 4.4.4.
Yes, that was a good catch. What I did was RSD Lite to 4.4.4 now which reset all my data.
KidJoe said:
so based on post # 14 of this post... it appears you are all good now? is that the case? Or do you still need help?
Oh, and if your bootloader is locked (Verizon non-DE), you can't get code from China Middle man, and you are on 4.4.2, you could try TowelPieRoot for rooting, but write protection is enabled so it will be kind of limited (compared to SlapMyMoto/MotoWPNoMO or if you had an unlocked bootloader), and there is no root for 4.4.4.
Click to expand...
Click to collapse
Correct, I do not need help anymore but thank you.
Hello, I want to root my new Xperia Z3 Compact just to uninstall the carrier's bloatware. It came with 23.1.A.1.28 (i exchanged it for a new galaxy alpha, it was bought at the beginning of June ).
Rooting status says : Bootloader unlock allowed : No.
I don't even want to try to unlock it. Is it possible to downgrade the firmware with locked bootloader?
Will i lose anything? If possible, I'd really like to have a complete guide on both downgrading, rooting and upgrading back.
Thanks.
Hm, that's weird, I've checked "Search" and it's working just fine. Use search or check sticky next time.
http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343
sorry and thank you, i did actually try searching for it but i was overwhelmed by what came up and lot's of it lead to guides containing unlocking the bootloader and i'm not really confident tinkering with android much
U can root with downgrade method. But thats all since u cannot unlock ur bootloader. If u follow the posted guide u should get it. Have done it with the guide without unlocking
great, I was kind of confused, I thought i need to unlock the bootloader to flash anything, including the downgrade
Thread Closed Per OP Request
hello,i bought mine from uk,model xt1900-5,when i enter code in moto website its says "not eligible for bootloader unlocking".have anybody bearing this model succeeded unlocking bootloader?
no one didnt even tried?
solved,sorry may bad.please remove the thread.
Before you close, explain this for the newbies. I have the same problem, the OEM Unlock option in developer mode deosn't work, so I flash the stock signed ROM and after this I be able to unlock.
lucasbitencourt said:
Before you close, explain this for the newbies. I have the same problem, the OEM Unlock option in developer mode deosn't work, so I flash the stock signed ROM and after this I be able to unlock.
Click to expand...
Click to collapse
Hi, sorry that this is old, but I've had my XT1900-5 for a few months and want to start rooting it finally. But I haven't bothered much because of the issue I've read about unlocking this bootloader. What signed ROM etc. ? Any help to get me started would be useful.
no complexity,just follow the instructions in moto website , copy the code properly(use the moto recommended tool for accuracy) & you are good to go,for twrp & root see the forum.