Official Nougat update for US T713? - Galaxy Tab S2 Q&A, Help & Troubleshooting

Has an official Nougat update for US T713 showed up at all yet? If not, is it likely to happen? I know some have had trouble with Nougat, so maybe I don't actually want it... but I do want it! :laugh:
Craig

csetera said:
Has an official Nougat update for US T713 showed up at all yet? If not, is it likely to happen? I know some have had trouble with Nougat, so maybe I don't actually want it... but I do want it! :laugh:
Craig
Click to expand...
Click to collapse
Yes! Just flashed it a couple of hours ago. It's available from sammobile but I pulled it from smart switch. Much faster than sammobile. Its looking great.

Long wait

jhill110 said:
Yes! Just flashed it a couple of hours ago. It's available from sammobile but I pulled it from smart switch. Much faster than sammobile. Its looking great.
Click to expand...
Click to collapse
Are you talking about the smart switch app or something else? Can you point me in the right direction?
Thanks!
Craig

Just did an update check and my US Tab s2 8.0 is currently downloading it. The OTA. NO smart switch or anything needed.
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
csetera said:
Are you talking about the smart switch app or something else? Can you point me in the right direction?
Thanks!
Craig
Click to expand...
Click to collapse
Just do check for updates in settings.

Cozmo85 said:
Just did an update check and my US Tab s2 8.0 is currently downloading it. The OTA. NO smart switch or anything needed.
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Just do check for updates in settings.
Click to expand...
Click to collapse
Unless like me you're rooted... No OTA then. Smart Switch is what I do partly because I end up with the stock tar file(s) and partly because it's a hell of a lot faster than downloading the file from sammobile.

Sure enough... a manual check and it is now downloading. I guess I should have tried that before asking!

Other than Nougat base and the change to the theming are there any other big changes? Does Samsung support theming on any of the tablets or is that reserved for the phones?

Is anyone else missing the built-in blue light filter? It's supposed to be in the quick tile icons but it's not there, and I don't mean reading mode.

fonetyk said:
Is anyone else missing the built-in blue light filter? It's supposed to be in the quick tile icons but it's not there, and I don't mean reading mode.
Click to expand...
Click to collapse
Samsung left this out in the Nougat update for the S2. Don't ask why. Nobody besides Samsung knows probably.

hey guys any word on what would work to root the t713 on nougat? I'm trying to parse about 900 threads on the subject but it is hard to figure out. Seems like odin + twrp + supersu? thanks

csetera said:
Has an official Nougat update for US T713 showed up at all yet? If not, is it likely to happen? I know some have had trouble with Nougat, so maybe I don't actually want it... but I do want it! :laugh:
Craig
Click to expand...
Click to collapse
Got nougat update yesterday (T713 US)

jhill110 said:
Yes! Just flashed it a couple of hours ago. It's available from sammobile but I pulled it from smart switch. Much faster than sammobile. Its looking great.
Click to expand...
Click to collapse
jhill110 said:
Long wait
Click to expand...
Click to collapse
Cozmo85 said:
Just did an update check and my US Tab s2 8.0 is currently downloading it. The OTA. NO smart switch or anything needed.
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
Just do check for updates in settings.
Click to expand...
Click to collapse
csetera said:
Sure enough... a manual check and it is now downloading. I guess I should have tried that before asking!
Click to expand...
Click to collapse
Luftwaffe said:
Got nougat update yesterday (T713 US)
Click to expand...
Click to collapse
How has the Nougat update been for you and your tablet?
My SM-T713 Nook version just received it this morning and I am holding off install, until I find out if there are any issue with it.
Thanks!

Related

Update incoming (236mb) - check now 05.13.15

http://imgur.com/SCzQcn0
I have the update available as well, it auto downloaded when I hit check for update so be aware.
Mine JUST started! Glad I caught it during download and shut the phone off. Just rooted yesterday and I'll be pissed if I lose it! lol. Hopped on so I could find what needed frozen in TiBu to stop it.
---------- Post added at 08:15 AM ---------- Previous post was at 08:15 AM ----------
chuckado said:
I have the update available as well, it auto downloaded when I hit check for update so be aware.
Click to expand...
Click to collapse
I never checked for an update or anything. It started all on it's own.
Wanted to update but I rooted... How can I unroot to get the update?
freemeech said:
Wanted to update but I rooted... How can I unroot to get the update?
Click to expand...
Click to collapse
Opposite here. I took the update and want to root. According to the root thread, OE2 can be rooted so I should be good. We'll see.
So do I have to Odin back to stock? I really don't wanna do that!
Anyone know whats new?? :\
freemeech said:
So do I have to Odin back to stock? I really don't wanna do that!
Click to expand...
Click to collapse
I don't know of any other options for you at the moment.
My S6 Edge is rooted and I can update if I want. If you want to update go to Software Update and do it.
freemeech said:
Wanted to update but I rooted... How can I unroot to get the update?
Click to expand...
Click to collapse
---------- Post added at 11:18 AM ---------- Previous post was at 11:16 AM ----------
Check in Software Update if you can update being rooted. My Edge is rooted and I can update if I wish.
freemeech said:
So do I have to Odin back to stock? I really don't wanna do that!
Click to expand...
Click to collapse
Will I lose root if I update?
wp4jot said:
My S6 Edge is rooted and I can update if I want. If you want to update go to Software Update and do it.
---------- Post added at 11:18 AM ---------- Previous post was at 11:16 AM ----------
Check in Software Update if you can update being rooted. My Edge is rooted and I can update if I wish.
Click to expand...
Click to collapse
Anyone else confirm? I've frozen my ATT software update in TB and I'm not on wifi right now. Don't want to use the data.
Let us know if you have root once you updated or if you can still root your phone.
You can't update OTA if you have root!
wp4jot said:
My S6 Edge is rooted and I can update if I want. If you want to update go to Software Update and do it.
---------- Post added at 11:18 AM ---------- Previous post was at 11:16 AM ----------
Check in Software Update if you can update being rooted. My Edge is rooted and I can update if I wish.
Click to expand...
Click to collapse
I'm not sure that this is very accurate. You may be able to download the update, but installing it is a whole different thing.
FloOne said:
You can't update OTA if you have root!
Click to expand...
Click to collapse
You can't root if you've installed the update either. I'm going to see if I can Odin back. Doubt it, but worth a shot.
wp4jot said:
My S6 Edge is rooted and I can update if I want. If you want to update go to Software Update and do it.
---------- Post added at 11:18 AM ---------- Previous post was at 11:16 AM ----------
Check in Software Update if you can update being rooted. My Edge is rooted and I can update if I wish.
Click to expand...
Click to collapse
Are you saying that you're rooted and that you simply have the ability to update but haven't taken the OTA? Or you've verified that your phone is rooted, taken this OTA and your phone is working fine? I didn't think you could take the OTA rooted.
---------- Post added at 08:50 AM ---------- Previous post was at 08:46 AM ----------
done12many2 said:
I'm not sure that this is very accurate. You may be able to download the update, but installing it is a whole different thing.
Click to expand...
Click to collapse
Yea I wanted some clarification after reading the original post.
done12many2 said:
You can't root if you've installed the update either. I'm going to see if I can Odin back. Doubt it, but worth a shot.
Click to expand...
Click to collapse
So the OEM has patched the exploit from pingpongroot? Might hold off on the OTA now for a while longer.
thestrangebrew said:
So the OEM has patched the exploit from pingpongroot? Might hold off on the OTA now for a while longer.
Click to expand...
Click to collapse
It appears so. When I attempt to run the exploit, I'm notified that my device isn't supported yet. I'm not too worried as the team seems to be chewing through devices and updates at a cyclic rate.
So... most important thing to know here that nobody has mentioned...
How do you prevent it from updating if you're not rooted? Or is the answer to this question still "root the device" -_-
Poetique said:
So... most important thing to know here that nobody has mentioned...
How do you prevent it from updating if you're not rooted?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60704380&postcount=34
KryptosXLayer2 said:
This is just my opinion, and since everyone has one, take it for what you will, but I've frozen the AT&T Software Update because assuming Samsung patches the root in the next update and sends it to the carriers to distribute, do you really want to do everything you can to get the next update even if you lose root?
Personally, I've done everything I could to get root, even if this cost me Samsung Pay which hopefully it won't, because someone smart enough on here will figure out how to patch the update with a ROM that we can flash later.....
Obviously that won't work right this second since we can't flash anything but Smart Switch / Odin stock junk, but assuming Safestrap or similar gets released, you can keep your bootloader lock all you want ATT, we'll just flash what we want over it!
Click to expand...
Click to collapse
I just confirmed that OE2 can be flashed back to OCE via Odin.
KryptosXLayer2 said:
http://forum.xda-developers.com/showpost.php?p=60704380&postcount=34
Click to expand...
Click to collapse
Haha, looks like I was updating my post at the same time you were posting.
What I was actually looking for was a way to do it without rooting seeing as we still have no confirmation regarding Samsung Pay functionality and root breaking it. At some point in the near future in my career, things like Samsung Pay, Apple Pay, etc are going to become useful so I need to have mine handy.

[ROM][10/14/15][ATT][Odin] - OFFICIAL ROM 5.1.1

This is the official 5.1.1 rom of ATT version.
pan.baidu.com/s/1c0BHvI4
Use Odin to flash it.
I hope someone can make it Deodexed,
then we can use Xposed.
Thanks.
Is this prerooted?
ChristopherXDA said:
Is this prerooted?
Click to expand...
Click to collapse
No, just official.
For the guys who rooted their phones, can't recieve the update.
Interesting, I will see what I can do with it.
shiacer said:
This is the official 5.1.1 rom of ATT version.
pan.baidu.com/s/1c0BHvI4
Use Odin to flash it.
I hope someone can make it Deodexed,
then we can use Xposed.
Thanks.
Click to expand...
Click to collapse
So if you would like to upload a link to the software that is in English. I would love to see what I can do with it. Otherwise I will wait. I am all good with messing around with ASIAN sites and having to download bloat crapware just to get a file. But thanks for the effort!
---------- Post added at 04:05 PM ---------- Previous post was at 04:02 PM ----------
jhr5474 said:
So if you would like to upload a link to the software that is in English. I would love to see what I can do with it. Otherwise I will wait. I am all good with messing around with ASIAN sites and having to download bloat crapware just to get a file. But thanks for the effort!
Click to expand...
Click to collapse
AFH or an american site would be good. Sorry I am not willing to mess with this site its not worth the risk or the trouble. Otherwise i can wait for a diff copy to come out.
theandroidsoul.com/download-android-5-1-1-update-for-att-galaxy-s6-g920aucu3boi2-and-s6-edge-g925aucu3boi2-odin-tar-84516/
Can anyone confirm if this works?

Galaxy S6 Active G890A Update Server

Edit: May 5. WE have links! Thanks to scorpioncom, archie87, Red5 and all others who have helped find the update files. USE AT YOUR OWN RISK. These files are very likely not the final revision and may contain bugs that could ruin your phone. Now that that disclaimer is out of the way...
From the latest 5.1.1 G890AUCS3BPCG to 6.0.1 G890AUCU3CPE3:
https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCS3BPCG-to-U3CPE3-UP
From the previous 5.1.1 G890AUCU3BPB3 to 6.0.1 G890AUCU3CPE3
https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCU3BPB3-to-U3CPE3-UP
Follow instructions here to update using these files:
http://forum.xda-developers.com/att-galaxy-s6/general/android-6-0-1-g920aucu3cpc2-att-t3371227
End of update...
-----------------------------------------------------------------------------
Original Post:
I have not personally found anything on the server as of yet, besides the most recent 5.1.1 OTA update, but when MM goes live we should be able to get it before most people by poking around in this server. It might even be there now and I haven't tried the right names.
https://xdmd.sl.attcompute.com/agents/48698/1488/
The update I used to find the server was here:
https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCU3BPB3-to-S3BPCG-UP
Happy hunting.
have any thoughts on what should be a link for g925a?
xolodets said:
have any thoughts on what should be a link for g925a?
Click to expand...
Click to collapse
Sorry. Without access to one, I really don't know.
I wouldn't know where to start regarding all the letters on the firmware build.
archie87 said:
I wouldn't know where to start regarding all the letters on the firmware build.
Click to expand...
Click to collapse
Give me 2 latest firmware code of 925A I will help you
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
Nevermind, someone found it https://xdmd.sl.attcompute.com/agents/48652/1488/SS-G925AUCU3BOJ9-to-U3CPD6-UP
G925AUCU3CPD6 firmware, maybe 6.0
That's for the edge though. Can you do the same with the Active?
bcak610 said:
Give me 2 latest firmware code of 925A I will help you
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
Nevermind, someone found it https://xdmd.sl.attcompute.com/agents/48652/1488/SS-G925AUCU3BOJ9-to-U3CPD6-UP
G925AUCU3CPD6 firmware, maybe 6.0
Click to expand...
Click to collapse
G890AUCS3BPCG
G890AUCU3BPB3
See if that helps, lol.
Probably won't see anything until a month after the S6 update
I was trying to find it for the Galaxy S6 Edge+.
Current FW (5.1.1) = G928AUCU2APB2
Marshmallow (6.0.1) = G928AUCU2BPD5 (confirmed on Samsung's website)
Can anybody pull the link for me?
bptba93 said:
I was trying to find it for the Galaxy S6 Edge+.
Current FW (5.1.1) = G928AUCU2APB2
Marshmallow (6.0.1) = G928AUCU2BPD5 (confirmed on Samsung's website)
Can anybody pull the link for me?
Click to expand...
Click to collapse
Can you share the link where samssunng confirm it
bcak610 said:
Can you share the link where samssunng confirm it
Click to expand...
Click to collapse
http://www.samsung.com/us/support/answer/ANS00043774/997418903/SM-G928AZDAATT
Go to software version history. It's listed there.
I found a May 2016 file for the S6 Active G890A. It appears to be 6.0.1.
Here is the filename to use with the url in the first post.
SS-G890AUCU3BPB3-to-U3CPE3-UP
Length: 1624488162 (1.5G)
scorpioncom said:
I found a May 2016 file for the S6 Active G890A. It appears to be 6.0.1.
Here is the filename to use with the url in the first post.
SS-G890AUCU3BPB3-to-U3CPE3-UP
Length: 1624488162 (1.5G)
Click to expand...
Click to collapse
Great find! This is exciting. I bet it's not the final build though.
Edit: Downloading the file now.
Okay, I found this one as well which is for the most recent software build.
https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCS3BPCG-to-U3CPE3-UP
archie87 said:
Great find! This is exciting. I bet it's not the final build though.
Edit: Downloading the file now.
Okay, I found this one as well which is for the most recent software build.
https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCU3BPCG-to-U3CPE3-UP
Click to expand...
Click to collapse
How did you find the "49698" part of the URL?
bptba93 said:
How did you find the "49698" part of the URL?
Click to expand...
Click to collapse
I just copied the URL from the OP's first post and added the end of the link as provided above by scorpioncom.
archie87 said:
Great find! This is exciting. I bet it's not the final build though.
Edit: Downloading the file now.
Okay, I found this one as well which is for the most recent software build.
Click to expand...
Click to collapse
Do you know a way to flash the file? It's not flashable because it has no extension.
Jimmyvb98 said:
Do you know a way to flash the file? It's not flashable because it has no extension.
Click to expand...
Click to collapse
Just add .zip to the end of the file name.
---------- Post added at 10:52 AM ---------- Previous post was at 10:49 AM ----------
What is the latest official version that the Active is on? Is it G928AUCU2BPB2? Or G928AUCU2BPB3?
Red5 said:
Just add .zip to the end of the file name.
---------- Post added at 10:52 AM ---------- Previous post was at 10:49 AM ----------
What is the latest official version that the Active is on? Is it G928AUCU2BPB2? Or G928AUCU2BPB3?
Click to expand...
Click to collapse
The active is G890A. I'm running G890AUCS3BPCG which is the link I posted above.
archie87 said:
The active is G890A. I'm running G890AUCS3BPCG which is the link I posted above.
Click to expand...
Click to collapse
Is the S a typo?
The reason I ask is because according to Samsungs website, the latest is G928AUCU2BPB2 but I think there may have been a small ota that bumped everyone up to G928AUCU3BPB3 but yet again, Samsung is reporting that the MM update is G928AUCU2BPD5 which doesn't make sense of why go from a 2 to 3 back down to 2.
If the latest official AT&T version (5.1.1) is indeed G928AUCU3BPB3, then I found an ota to go from BPB3 to CPE3 here: https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCU3BPB3-to-U3CPE3-UP
Red5 said:
Is the S a typo?
The reason I ask is because according to Samsungs website, the latest is G928AUCU2BPB2 but I think there may have been a small ota that bumped everyone up to G928AUCU3BPB3 but yet again, Samsung is reporting that the MM update is G928AUCU2BPD5 which doesn't make sense of why go from a 2 to 3 back down to 2.
If the latest official AT&T version (5.1.1) is indeed G928AUCU3BPB3, then I found an ota to go from BPB3 to CPE3 here: https://xdmd.sl.attcompute.com/agents/48698/1488/SS-G890AUCU3BPB3-to-U3CPE3-UP
Click to expand...
Click to collapse
AT&T's website is showing G890AUCS3BPCG which is what my build number says as well. I find the build numbers confusing.
https://www.att.com/esupport/article.html#!/wireless/KB426851

Google assistant coming to everyone officially...

Apparently Google will finally start releasing Google Assistant to all MM ans N powered devices this week
http://www.androidauthority.com/google-assistant-nougat-marshmallow-752551/
Great news!
Sent from my OnePlus3 using XDA Labs
Get in!
Thats the most awesome news of 2017 till date, super HYPE (⌐▨_▨)
Google just want all your data. Anyhow.
As long as it does every single thing that Google Now does then I'm in. :highfive:
However, if they have taken anything out, I'd be happier if the Pixel owners continue the beta testing.
Finally google assistant
https://www.youtube.com/watch?v=W_BeK48-Bzc
Rolling out to Android M and N phones starting today.
Already available. Just install the latest play services from apk mirror
candiesdoodle said:
Already available. Just install the latest play services from apk mirror
Click to expand...
Click to collapse
cant seem to find it. can you share the link?
reyscott said:
cant seem to find it. can you share the link?
Click to expand...
Click to collapse
http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-10-5-37-release/
You will need to figure out the version. I think the version with 440 in he name should work
candiesdoodle said:
http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-10-5-37-release/
You will need to figure out the version. I think the version with 440 in he name should work
Click to expand...
Click to collapse
I'm on the latest (beta) play services and Google app but assistant still hasn't been enabled. Any ideas?
Have you verified that you are indeed on the latest versions which are available on apk mirror? For me it worked without any issues. I suggest check for both apps
candiesdoodle said:
Have you verified that you are indeed on the latest versions which are available on apk mirror? For me it worked without any issues. I suggest check for both apps
Click to expand...
Click to collapse
it seems not working on my end
Might also involve a server side change
Guys if u really need google assistant and have custom recovery flash this.
https://forum.xda-developers.com/general/general/android-7-0-google-assistant-t3535257
candiesdoodle said:
Have you verified that you are indeed on the latest versions which are available on apk mirror? For me it worked without any issues. I suggest check for both apps
Click to expand...
Click to collapse
Ya I'm on the latest ones. Doesn't seem to work.
---------- Post added at 02:09 PM ---------- Previous post was at 02:08 PM ----------
2x4 said:
Might also involve a server side change
Click to expand...
Click to collapse
Yeah could be.
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
abhi0502 said:
Guys if u really need google assistant and have custom recovery flash this.
https://forum.xda-developers.com/general/general/android-7-0-google-assistant-t3535257
Click to expand...
Click to collapse
It can be enabled on oxygen os too but it's about the out of the box compatibility and operation.
the assistant will automatically and gradually roll out to devices by google, you're not supposed to do anything to get it, when people start receiving it that means it's now possible to just install it without the previous work around (mentioned on the above posts) , we''ll immediately know about it and everyone will be able to just download and install
Also need to be on English US as primary language of the OS and some more requirements.
candiesdoodle said:
Also need to be on English US as primary language of the OS and some more requirements.
Click to expand...
Click to collapse
Ok that makes sense. I'm on English India and i'd wait untill they make it available on either English India or English UK.

Sprint OTA Android 10 update install!

https://www.mylgphones.com/download-sprint-lg-g8-thinq-android-10-firmware-final-v20a.html
Credits to the member ca8180 who shared the post ??
Works with no issues. Follow the instructions
Works with U101, thats the version i was on.. Wifi , data etc works...
My software version is U10l
Will it work?
---------- Post added at 02:37 AM ---------- Previous post was at 02:36 AM ----------
guytano86 said:
https://www.mylgphones.com/download-sprint-lg-g8-thinq-android-10-firmware-final-v20a.html
Credits to the member ca8180 who shared the post ??
Works with no issues. Follow the instructions
Click to expand...
Click to collapse
My version is U10l
Will this update still work ok?
Yes it should work, so did mine.. I will edit the title to U101.. Enjoy
crazynapkinman said:
My software version is U10l
Will it work?
---------- Post added at 02:37 AM ---------- Previous post was at 02:36 AM ----------
My version is U10l
Will this update still work ok?
Click to expand...
Click to collapse
guytano86 said:
Yes it should work, so did mine.. I will edit the title to U101.. Enjoy
Click to expand...
Click to collapse
Worked perfectly!
Awesome!
Will we still get official update OTA now?
Ok, is it just me, or did the camera improve DRASTICALLY?
kyle_el said:
Ok, is it just me, or did the camera improve DRASTICALLY?
Click to expand...
Click to collapse
The whole experience across the board everything including the camera has improved. It is literally like getting a new phone. This is a killer value phone now. Picked mine off eBay open box for 280 bucks and after this update it's a hard phone to beat for this price point.
Works perfect, this is the final build.
---------- Post added at 07:23 PM ---------- Previous post was at 07:23 PM ----------
kyle_el said:
Ok, is it just me, or did the camera improve DRASTICALLY?
Click to expand...
Click to collapse
Seems like it, the 60fps mode on 4k seems to be way better now.
The update caused my Google Pay to no longer work. The app cites that my phone may be rooted or using unofficial software. Other than that everything is quite an improvement.
What about OTAs now? Will they still work when sprint releases them?
siulmagic said:
Works perfect, this is the final build.
---------- Post added at 07:23 PM ---------- Previous post was at 07:23 PM ----------
Seems like it, the 60fps mode on 4k seems to be way better now.
Click to expand...
Click to collapse
It's not final u don't understand
---------- Post added at 02:51 AM ---------- Previous post was at 02:50 AM ----------
crazynapkinman said:
What about OTAs now? Will they still work when sprint releases them?
Click to expand...
Click to collapse
Nope. u can follow my guide to get back to pie tho
antintin said:
It's not final u don't understand
---------- Post added at 02:51 AM ---------- Previous post was at 02:50 AM ----------
Nope. u can follow my guide to get back to pie tho
Click to expand...
Click to collapse
Link to that guide?
crazynapkinman said:
Link to that guide?
Click to expand...
Click to collapse
Dude just check the forums. Join the telegram group if u need extra help and get the latest updates from the leakers.
Need support
guytano86 said:
https://www.mylgphones.com/download-sprint-lg-g8-thinq-android-10-firmware-final-v20a.html
Credits to the member ca8180 who shared the post ??
Works with no issues. Follow the instructions
Works with U101, thats the version i was on.. Wifi , data etc works...
Click to expand...
Click to collapse
I have LG G8 network locked. It's mean bad IMEI. I'm in outside u.s can I use my country sim if I update to android 10?
I'm getting an invalid URL error when I try to go. Is there another link?
2390 said:
I'm getting an invalid URL error when I try to go. Is there another link?
Click to expand...
Click to collapse
Join the LG V50 telegram group. Just dear search LG V50 in the top of the app
cas8180 said:
The whole experience across the board everything including the camera has improved. It is literally like getting a new phone. This is a killer value phone now. Picked mine off eBay open box for 280 bucks and after this update it's a hard phone to beat for this price point.
Click to expand...
Click to collapse
Yeah, good for you dude! I just grabbed one for a similar deal
Hish123 said:
I have LG G8 network locked. It's mean bad IMEI. I'm in outside u.s can I use my country sim if I update to android 10?
Click to expand...
Click to collapse
Very good question, does anybody knows?
JcCoello said:
Very good question, does anybody knows?
Click to expand...
Click to collapse
No why would an update unlock an IMEI? IMEI number stays the same no matter the update and even v40 sim doesn't get unlocked if you flash a custom rom
Does anyone have a work around for Google Pay after the update?
can i install this on my unlocked AT&T g8?

Categories

Resources