Database Develop

Mokee Open Source - Best Rom series ever made

I had tried and tested every MM ROM in Xda forum, I really appreciate hard work of developers but i found Mokee Rom to be most stable and optimized ROM. I think gallery problem is source bug and every custom ROM ( thread on bug - http://forum.xda-developers.com/redmi-2/help/gallery-problem-persistent-mm-rom-t3432436 )
This Rom is worth trying
Download Link ( original link, no mirror) - http://download.mokeedev.com/?device=wt88047

Parikansh said:
I had tried and tested every MM ROM in Xda forum, I really appreciate hard work of developers but i found Mokee Rom to be most stable and optimized ROM. I think gallery problem is source bug and every custom ROM ( thread on bug - http://forum.xda-developers.com/redmi-2/help/gallery-problem-persistent-mm-rom-t3432436 )
This Rom is worth trying
Download Link ( original link, no mirror) - http://download.mokeedev.com/?device=wt88047
Click to expand...
Click to collapse
Always faced error when flashed Mokee rom (released builds) + gapps, with "not enough space" message.
What gapps type must be used?
my device:
R2 204817
TWRP 3.0.2 multirom
opengapps nano.

thonipublic said:
Always faced error when flashed Mokee rom (released builds) + gapps, with "not enough space" message.
What gapps type must be used?
my device:
R2 204817
TWRP 3.0.2 multirom
opengapps nano.
Click to expand...
Click to collapse
i use opengapps pico (~70mb)
have you tried nightlies?
do you use latest twrp? + try rebooting it before/after flash

thonipublic said:
Always faced error when flashed Mokee rom (released builds) + gapps, with "not enough space" message.
What gapps type must be used?
my device:
R2 204817
TWRP 3.0.2 multirom
opengapps nano.
Click to expand...
Click to collapse
only pico gapps work with MOKee

Okey brothers, thank you very much.

new release is up!
(not nightly)
:good:

Install Official Marshmallow MIUI 8 for Redmi Note 3 - [Stable] [Without Pc]

Hi guys The official MIUI 8 with Android Marshmallow is out now for the Redmi Note 3 (SD). It's official and stable!
It doesn't matter that whether have a locked or unlock bootloader. You also don't need a pc
So I have made a video showing you that how you can install the MIUI 8 STABLE MARSHMAALOW on your Redmi Note 3.
Do check it out:-
Link- https://goo.gl/OKVXC2

Hii... I'm unlocked officially and rooted with xposed installed. Not custom kernel or rom. I read on miui forum tht installing mm causes bootloop. How can I ensure it doesn't. Thanks.

I've unlocked the bootloader but didn't install any recovery. Can I install this?

WarriorMax said:
Hii... I'm unlocked officially and rooted with xposed installed. Not custom kernel or rom. I read on miui forum tht installing mm causes bootloop. How can I ensure it doesn't. Thanks.
Click to expand...
Click to collapse
You can install it but from TWRP recovery

Neeraj Lakkapragada said:
I've unlocked the bootloader but didn't install any recovery. Can I install this?
Click to expand...
Click to collapse
You can try it but I recommend to flash TWRP recovery on your device and then flash it from recovery

Sorry to say, but this is main development section & your post should be in guides section.

I bought this just now
How and were can i found bootloader information?
Sent from my Redmi Note 3

KAUSHDROID said:
You can install it but from TWRP recovery
Click to expand...
Click to collapse
Which version of twrp do u use? I've use zcx for incremental updates and I'm wondering if it works with major Android version upgrade?

WarriorMax said:
Which version of twrp do u use? I've use zcx for incremental updates and I'm wondering if it works with major Android version upgrade?
Click to expand...
Click to collapse
I don't have any version of TWRP recovery installed on my device yet, I am waiting for the bootloader permission to unlock it. So I don't have any idea about this, So you can google it.

If i flash this ROM Via TWRP ..so my bootloader will relock again..?

m4h38008 said:
If i flash this ROM Via TWRP ..so my bootloader will relock again..?
Click to expand...
Click to collapse
No

KAUSHDROID said:
No
Click to expand...
Click to collapse
Thnks buddy

One more question brother ryt now m using AICP 12.1 (Android N-7.1.1) so i can flash this rom over this ROM or i have to Flash MIUI Rom frst...????

i updated my redmi note 3 via fastboot rom
then i unlock bootloader (Unofficially) and flash twrp recovery
device power up and all function works except Setting
when i Click on Setting it Crashed in a moment
tried everything
any solution please help

Deleted

I have unofficially unlock bootloader and RR 7.1rom. Can be flash by custom recovery? Will not be relock boot loader?

m4h38008 said:
One more question brother ryt now m using AICP 12.1 (Android N-7.1.1) so i can flash this rom over this ROM or i have to Flash MIUI Rom frst...????
Click to expand...
Click to collapse
First flash the MIUI ROM then this

charlykwon said:
I have unofficially unlock bootloader and RR 7.1rom. Can be flash by custom recovery? Will not be relock boot loader?
Click to expand...
Click to collapse
First you have to flash the MIUI ROM on your device

KAUSHDROID said:
Hi guys The official MIUI 8 with Android Marshmallow is out now for the Redmi Note 3 (SD). It's official and stable!
It doesn't matter that whether have a locked out unlock bootloader. You also don't need a pc
So I have made a video showing you that how you can install the MIUI 8 STABLE MARSHMAALOW on your Redmi Note 3.
Do check it out:-
Link- https://goo.gl/OKVXC2
Click to expand...
Click to collapse
Wrong section

Can we update the ROM via ota officially?

*Depreciated* [Global/China] Dev/Stable/Alpha Firmware Packages for the Mi 6

Project depreciated! Leaving here for the time being.
See yshalsager's thread for automated firmware zips and quicker releases:
https://forum.xda-developers.com/mi-6/development/firmware-xiaomi-mi-6-t3760924
Here will be the firmware packages from the latest Global/China MIUI ROMs for those of you using custom ROMs that require the firmware for radios etc to work.
I will try to keep it as up-to-date as possible so every time you need to update your ROM you can grab the newest firmware here and use it to keep firmware up-to-date as well.
Installation Instructions:
I recommend using firmware from the Stable builds, but the firmware from the other ROMs should be fine too. Let us know in the comments if you see any differences between them.
For Oreo ROMs use Oreo Firmware.
For Nougat ROMs use Nougat Firmware.
Follow advice from your ROM maintainer!
(or)
1. Wipes
2. Flash Firmware
3. Flash ROM
4. Other stuff you do in recovery
Global ROMs Firmware:
Oreo Global Developer Firmware:
Latest:
8.3.1: AFH
Previous:
See my AFH Global Beta Oreo folder: All Firmware Packages
Nougat Global Stable Firmware:
Latest:
9.2.2.0: AFH
Chinese ROMs Firmware:
Oreo China Stable Firmware:
Latest:
9.2.3.0: AFH
Oreo China Developer Firmware:
Latest:
8.2.24: AFH
Previous:
See my AFH China Beta Oreo folder: All Firmware Packages
Nougat China Stable Firmware:
Latest:
9.2.4.0: AFH
Previous:
See my AFH China Stable folder: All Firmware Packages
Nougat China Developer Firmware:
Latest:
7.12.7: AFH
Previous:
See my AFH China Dev folder: All Firmware Packages

thank you

Thanks. Note that you need the latest TWRP.
Release notes:
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html
Download:
https://dl.twrp.me/sagit/

Sounds great! Installing this on top of an already installed ROM is not recommended?

Ultraschorsch said:
Sounds great! Installing this on top of an already installed ROM is not recommended?
Click to expand...
Click to collapse
In theory it should be fine since it doesn't replace anything to do with /system.
In practice I'm not 100% sure as I've seen a few people mess up their installs by flashing firmware after ROM.
You can just flash firmware then dirty flash your ROM to be sure.
Kind of like if you were updating your ROM just using the zip version you already are on.

Dobsgw said:
In theory it should be fine since it doesn't replace anything to do with /system.
In practice I'm not 100% sure as I've seen a few people mess up their installs by flashing firmware after ROM.
You can just flash firmware then dirty flash your ROM to be sure.
Kind of like if you were updating your ROM just using the zip version you already are on.
Click to expand...
Click to collapse
That worked! I am on AOSPA and everything seems to work. Thank you for sharing!

Thread should be stickied

So for NisseCool's LOS15, I should grab the Oreo Alpha Firmware now? Or just keep the China Dev Nougat?

ArcOnFire said:
So for NisseCool's LOS15, I should grab the Oreo Alpha Firmware now? Or just keep the China Dev Nougat?
Click to expand...
Click to collapse
Up to you.
I'm using the dev for LOS 15 but they should all work fine.
There doesn't seem to be noticeable differences between the firmwares.
Just giving the option to those who want it

should I wipes system before I flash this firmware？

Liaoyiwa said:
should I wipes system before I flash this firmware？
Click to expand...
Click to collapse
No its not necessary.
Nothing from the zip should affect the system partition.
However I recommend flashing the firmware before flashing your ROM eg with an update or dirty flash just to be 100% sure.
But many users choose to just flash the updated firmware over their ROM and it works just as well
Maybe I'm just OCD about my install proceedures

Oreo Beta Firmware coming now. Link will be up today.

Thx a lot!I fixed nfc not working in miui by flashing the latest china dev firmware.

Dobsgw said:
Oreo Beta Firmware coming now. Link will be up today.
Click to expand...
Click to collapse
Hi buddy. Whick FW to use for latest AospExtended from 30/12/2017?

icrunchbanger said:
Hi buddy. Whick FW to use for latest AospExtended from 30/12/2017?
Click to expand...
Click to collapse
One of the latest ones
On LineageOS I'm using the latest stable firmware.
I haven't been able to update the firmware packages for the last week as I'm away ATM but will be back soon and can resume uploading them.
You can also make the zips yourself if you download the latest ROM from miui website and use one of mine as a template of what files to remove and what to leave.
And then compare the updater script to see what lines to remove.
Its really easy I'm just uploading for people that don't want to download an entire ROM

China dev 7.11.30 :
https://androidfilehost.com/?fid=745849072291698124

Global stable 9.0.2.0:
https://androidfilehost.com/?fid=889964283620776132

Hi, do you have Global Stable 8.2.2.0 firmware? I've mic problem with my Mi6, and it seems the mic is working only in 8.2.2.0

fuqiangyang said:
Hi, do you have Global Stable 8.2.2.0 firmware? I've mic problem with my Mi6, and it seems the mic is working only in 8.2.2.0
Click to expand...
Click to collapse
No sorry.
You can make it yourself very easily though by downloading the full package from end.muiu.com and then using one of my firmware packages as an example of what to remove and what to leave.
Then copy the updater-script from mine to yours or edit it to be the same and flash

Dobsgw said:
No sorry.
You can make it yourself very easily though by downloading the full package from end.muiu.com and then using one of my firmware packages as an example of what to remove and what to leave.
Then copy the updater-script from mine to yours or edit it to be the same and flash
Click to expand...
Click to collapse
Ok, i will try it, thanks a lot
I'm planning to use custom ROM like LOS, but everytime i flash, the mic always not working properly, for example when recording, my voice can't be recorded, but if i tap the mic, the tapping voice is recorded..in the MIUI 9 Stable and Beta, the voice can be recorded but we have to speak very closely to the mic and the voice result also very low..and when i tried to flash back to 8.2.2.0 the mic is working normally, so do u think it's the firmware problem?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
I'm quite newbie about this, so i'm really sorry if i bother u a lot

[ROM][UNOFFICIAL] [7.1.2] [Kenzo/Kate] Lineage OS [5 July 2019]

DISCLAIMER:
1. If you don't know anything about custom ROMs please don't install this ROM.
2. If anything happens to your phone or you brick you're phone after installing this ROM, I will not be responsible for any damage whatsoever to any one.
3. Your phone warranty may be void.
IMPORTANT INFORMATION:
1. NO FEATURE REQUEST: I have strictly followed official way of building lineage os for kenzo and have not touched anything after that. I strongly prefer PURE LINEAGE OS EXPERIENCE. So I will never add or remove any feature for any reason.
2. UPDATE CYCLE: I will update once a month (will update only when monthly security patch updated in lineage repo)
3. MAINTENANCE TIME: I use this ROM as my daily driver in my Kenzo. So until my phone dies out I will continue building this ROM.
4. BUG FIXING: As I am new to custom ROM building, I can fix bugs present in my device only. However if bugs are very common I will try to fix them.
PREREQUISITES:
1. Officially unlocked bootloader.
2. Latest TWRP (3.2.3.0) installed.
FLASHING PROCEDURE:
1. Reboot to recovery
2. PERFORM FACTORY RESET (Please don't flash over official lineage OS, updater error 7 will come)
3. Wipe Cache, System, Dalvik
5. Flash ROM
6. Flash Gapps
7. Reboot system.
UPDATE PROCEDURE : (ONLY IF YOU HAVE THIS ROM PREVIOUS VERSIONS FLASHED)
1. Reboot to Recovery
2. Wipe Dalvik and Cache ONLY
3. Flash ROM
4. Flash Radon Kernel v6.3 (Optional)
5. Reboot
ADD ONS:
1. Gapps: Preferably Pico/Nano (Link: https://opengapps.org/)
2. Official Radon kernel v6.3 for nougat (Link: https://androidfilehost.com/?fid=673956719939817337)
3. Google camera : prefer this one (as it's most stable) https://drive.google.com/file/d/1U6GTbh549VpdSsOvQmIGMUg-qEcByPiF/view?usp=drivesdk
4. Remove AudioFx before installing Dolby Atmos, flash this patch- https://drive.google.com/file/d/1KPjfZ4eHXOJhvjYo_Y6SM28lpKEq8c6Y/view?usp=drivesdk
5. Dolby Atmos (7.1.2) - https://drive.google.com/file/d/1TuAAXh6JSDP_mQqXn3CMRuc5REnRgN99/view?usp=drivesdk
6. Install Greenify (from Play store) and then flash this patch to make it system app without rooting- https://drive.google.com/file/d/1q_sCCur4dgYj-Wre5x-3NRR6X1ypmHKP/view?usp=drivesdk
ROM DOWNLOAD LINK:
09.07.2019 :
https://drive.google.com/file/d/1rJXi-wE_Tw8BJzBJPRY3KvHiy4srA81t/view?usp=drivesdk
BUGS:
No bugs at all. Pure lineage os and rock solid nougat. Best battery life and performance for kenzo.
SOME SOLUTIONS FOR BUG FIXING
Those who are facing bug issue regarding wifi, bluetooth, network etc, I want to suggest that I am personally using this ROM and not found single bug till now. Reason such bugs arise are due to vendor or system files get corrupted or mismatch when flashing some treble ROMs. So following are solutions for the same. They are at various levels and if your problem is fixed DONT MOVE TO NEXT LEVEL.
LEVEL A:
1. Reboot to recovery
2. Wipe Dalvik and Cache
3. Flash ROM again
4. Reboot
LEVEL B:
1. Reboot to recovery
2. Perform COMPLETE WIPE (System, Dalvik, Cache, Format and Factory Reset)
3. Flash ROM
4. Flash Gapps
5. Reboot
LEVEL C:
1. Reboot recovery
2. Perform COMPLETE WIPE (System, Dalvik, Cache, Format and Factory Reset)
3. Flash firmware (LInk: https://drive.google.com/open?id=1EjRO_WhpBY5e2fPuuviRc2Ks52Szc3sO)
4. Flash ROM
5. Flash Gapps
6. Reboot to recovery
CREDITS:
@lineage
@TheStrix
@xda
@google AND INTERNET
Donation: https://drive.google.com/open?id=1racErd31wSUlXUFmhFgOgH-MVwz2Swy_
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Lineage OS
Security Patch level: 5 July 2019

@gitsdb
What about unofficially unlocked device ?

hmu333 said:
@gitsdb
What about unofficially unlocked device ?
Click to expand...
Click to collapse
You can try at your own risk.. I have officially unlocked.. Test it and tell others your experience here..

according to xda rules , you have to provide kernal,device tree and rom source link if I'm not doing any mistake

vatsal_chandan said:
according to xda rules , you have to provide kernal,device tree and rom source link if I'm not doing any mistake
Click to expand...
Click to collapse
OK thanks will update it..

Nice, can you make a deodexed build?

gitsdb said:
OK thanks will update it..
Click to expand...
Click to collapse
Just out of curiosity: why build nougat? Why don't you use lineage OS 13 builds by @gismoZ, for instance? He maintains his rom very well and applies all security patches. Diversity is good (sometimes), so I'm just curious.

how much SOT are you guys getting?

Waaaa just what I wanted after trying ROM with Android Pie. Are there any bugs to report or something?

saikou_ said:
Nice, can you make a deodexed build?
Click to expand...
Click to collapse
Sorry friend, no modification please.. Read my thread..

yoreek said:
Just out of curiosity: why build nougat? Why don't you use lineage OS 13 builds by @gismoZ, for instance? He maintains his rom very well and applies all security patches. Diversity is good (sometimes), so I'm just curious.
Click to expand...
Click to collapse
Nougat gives best camera experience as hal3 is supported. Google camera performance is much better with addition of excellent battery life. I have tested all version of android in kenzo and still think nougat is best for all purpose.

Simoom Sadik said:
how much SOT are you guys getting?
Click to expand...
Click to collapse
With average use approx 7 hours..

TheKerevas said:
Waaaa just what I wanted after trying ROM with Android Pie. Are there any bugs to report or something?
Click to expand...
Click to collapse
No bugs. Pure lineage OS. Rock solid in performance..

gitsdb said:
Sorry friend, no modification please.. Read my thread..
Click to expand...
Click to collapse
Of course i read your thread it's okay, nice rom. I like it

I have some questions:
1. does it work with TWRP 3.1.xx?
2. I am using official lineage 7.1.2 from thestrix, what procedure I should be doing? can I just flash it over?

lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up

Is VoLTE working?
I'm waiting for customized LineageOS N.

Does this ROM has stock kernel as radon or do we need to install it separately?
Simoom Sadik said:
lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up
Click to expand...
Click to collapse
Is anyone else experiencing this??
Can anyone post their battery usage (app wise & graph)?

Simoom Sadik said:
lineage OS kernel bug still exists.
phone shut down automatically at 39% battery.
after charging it boot up
Click to expand...
Click to collapse
I an using official Radon kernel v6.3 for nougat.. Please use that and report.. I have no issues like that.. Also battery life and performance are much better in this kernel.. If possible use battery profile while installing Radon kernel..

koboi.ngangkang said:
I have some questions:
1. does it work with TWRP 3.1.xx?
2. I am using official lineage 7.1.2 from thestrix, what procedure I should be doing? can I just flash it over?
Click to expand...
Click to collapse
1. It will work
2. No factory reset and than wipe system dalvik and cache.. Than install this ROM..(already mentioned in my thread post)

[ROM][DISCONTINUED][UNOFFICIAL][11] EvolutionX 5.9.2 for Razer Phone 2

​Evolution X 5.9.2 for the Razer Phone 2
DO NOT FLASH GAPPS, ALREADY INCLUDED
Feature:
EvoX
Chroma
Dolby Atmos
Gapps
Screenshot:
In attachment
First Time Install / Clean Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System when coming from non-AOSP ROMs
4. FORMAT data and tfcard if you are from a fde enabled ROM
5. Flash the ROM
6. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Flash the ROM
4. Reboot to System and #KeepEvolving
ROM Download
Download
Recovery: use lineage recovery for the first time then ignore flash warning
​
Android OS version: 11
Security patch level: Sep. 2021
Build author: Alcatraz
Source code: https://github.com/Evolution-X
Kernel source: Device
Device source: Kernel
ROM Developer: Alcatraz
Special thank for mike

Reserved

So this isn't phh-based?
Any known bugs?
Either way, thanks!

Are there any known bugs? If non, I'm willing to flash it asap

Reznor7 said:
So this isn't phh-based?
Any known bugs?
Either way, thanks!
Click to expand...
Click to collapse
Not gsi, and since the device tree is based on los official, there are no critical bug I found

faustoandrevd said:
Are there any known bugs? If non, I'm willing to flash it asap
Click to expand...
Click to collapse
since the device tree is based on los official, there are no critical bug I found

Alcatraz323 said:
since the device tree is based on los official, there are no critical bug I found
Click to expand...
Click to collapse
I'm currently on LOS actually, can I just factory reset and then sideload on recovery?
Also, Is the camera/flashlight bug on current LOS build present on this ROM?

faustoandrevd said:
I'm currently on LOS actually, can I just factory reset and then sideload on recovery?
Also, Is the camera/flashlight bug on current LOS build present on this ROM?
Click to expand...
Click to collapse
Both question: yes

Alcatraz323 said:
Both question: yes
Click to expand...
Click to collapse
Just one last question, do you have any plans on fixing in the foreseeable future? just wondering so I can flash the rom as a daily driver

faustoandrevd said:
Just one last question, do you have any plans on fixing in the foreseeable future? just wondering so I can flash the rom as a daily driver
Click to expand...
Click to collapse
may be, at lease los update I will follow

No GAPPS available?

Can someone test this on Verizon?

Thanks for the ROM. -Foundings_
-Same as Lineage 18.1 Officials/Unoffical
-Same Bugs-

Flashed the rom! Just wondering, how do I get the chroma app to work?

faustoandrevd said:
Flashed the rom! Just wondering, how do I get the chroma app to work?
Click to expand...
Click to collapse
Not support that app, I rewrote the chroma in settings, you can see "Razer Parts" in Settings

really looking forward to fixing the flashlight

Hi dev. I posted the same question in the Lineage thread, I am thinking about buying a RP2 and am wondering if the custom ROMs for this device have support for working FBE or FDE encryption? Is TWRP able to successfully decrypt the data partition using pattern unlock?
Thanks in advance for any reply.

Hello, I'm new in this kind of stuff. this is my first ever using custom rom, glad I managed to install this. (already use this rom for 1 month).
anyway, thanks for your work!

thanks

Los has repaired the flashlight. If this ROM is based on LOS, can it also be repaired