Database Develop

Viper4Android 2.5.0.5 Magisk module does not work

I'm trying to install the Viper4Android 2.5.0.5 module in Magisk. I installed the module and the app and then rebooted, but the driver status in Viper4Android under enabled indicates a "no".
I've tried some of the settings, but it does not seem to work. The sound is all the same. Any idea how to get this to work? There were no additional instructions for getting V4A to work.
Nexus 6 running Pure Nexus 7.1.2 with Magisk version 12.0

I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058

Didgeridoohan said:
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
I can confirm that the above link works great..

I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".

MiuKing said:
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
Click to expand...
Click to collapse
Everyone has different devices, different setups, etc. It's never going to "just work" easily for everyone. That said, the link above works great and doesn't really have much reading to do....
Only issue I had was it not working initially, but I set the mode to "compatible" instead of "normal" it instantly started working. In case you have issues with it not starting like I did.

Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
- Viper4Android APK here ( http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip )
- BusyBox you can get it on the Play Store
- This Magisk module for OP3T but if you have an other phone search an other compatible module ( https://androidfilehost.com/?fid=673368273298977808 )
- The SELinux Switch [IMPORTANT] ( https://forum.xda-developers.com/devdb/project/?id=22073#downloads )
UNINSTALL ALL PREVIOUS VERSIONS OF V4A ON YOUR DEVICE.
Now I'm gona show you how to get this sh*t working
Simply install unzip the Viper4Android folder and install this apk :
ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk
(Maybe a newer version can be delivered in the future I think you can install it).
Then install BusyBox.
Open V4A and install the Drivers.
When it's done go to Magisk -> Modules -> + and install the zip module for your device.
/!\REBOOT /!\
Finally you just have to install The SELinux Switch.apk and switch your SELinux to Permissive (maybe you have to reboot but for me when I reboot my SELinux go back to Enforcing SELinux so I switch it back when I reboot).
[Note : I don't know if it's important but I was flashing a zip of V4A that's install me V4A as a system app and it wasn't working (error I/O) this is not important but it maybe install me other files so maybe you have to do this if it's not working at the end].
V4A is working now (don't forget to switch off your stock equalizer in Settings -> Sound -> Balance)
If you have any problem or questions contact me.

Franck7519 said:
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
Click to expand...
Click to collapse
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Click to expand...
Click to collapse
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.

Franck7519 said:
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Click to expand...
Click to collapse
The module I suggested automatically sets permissive on boot for OOS devices.
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
The module I suggested automatically sets permissive on boot for OOS devices.
Click to expand...
Click to collapse
It's better than my method yet I'm agree but I don't find your module can you send me a link ?

Franck7519 said:
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Click to expand...
Click to collapse
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Click to expand...
Click to collapse
Ok thanks bru

[Module][Magisk] [Google Phone Contacts Messages Installer] [Systemless]

This magisk module Google Phone Contacts Messages Installer systemlessly, rrplaces stock (AOSP) phone, contacts & messaging apps. Compatible with Magisk v14
When you don't like stock/AOSP phone, contacts & messages apps; when you don't like to use aroma opengapps installer; when you don't like to install google phone, contacts & messages apps as secondary user apps... this module is for you!
How to..
Install using Magisk manager 5.3 & up
Or
Install using TWRP recovery
Download link: (module file is in following folders)..
Arm32: https://www.androidfilehost.com/?w=files&flid=224024
Arm64: https://www.androidfilehost.com/?w=files&flid=223700
(Arm32 module should work now, arm64 works nice!)
(Not working with oreo devices for now)
Note: 1. Apps are taken from Apkmirror and apps are unmodified
Note: 2. Select default phone app as phone (in system settings/apps/settings/default apps settings) otherwise caller ID won't be visible
Enjoy!

Changelogs:
v3.0
Arm64 & Arm32 both variants are updated with nodpi apps. Arm32 variant should work now.
v2.2.1
Fixed weird issues with magisk manager v5.4
v2.2
Fixed wrong module version
Updated to latest magisk template
v2.1
Initial build

v2.2
Changelogs: Fixed wrong version code.
Download link:
https://www.androidfilehost.com/?fid=962021903579485394

Request.
A kind request for ARM version also , If it's possible. :fingers-crossed:
Best Regards. :good:

Dark❶ said:
A kind request for ARM version also , If it's possible. :fingers-crossed:
Best Regards. :good:
Click to expand...
Click to collapse
I'll make it today. Only issue is i can't test arm32 version as I don't have arm32 device. Though I'll upload test version here today. Test it if you can.

Dark❶ said:
A kind request for ARM version also , If it's possible. :fingers-crossed:
Best Regards. :good:
Click to expand...
Click to collapse
Ok... Here the test file... for arm32 devices..
https://www.androidfilehost.com/?fid=745849072291681637
Test it & tell.

dr.bathman said:
I'll make it today. Only issue is i can't test arm32 version as I don't have arm32 device. Though I'll upload test version here today. Test it if you can.
Click to expand...
Click to collapse
dr.bathman said:
Ok... Here the test file... for arm32 devices..
https://www.androidfilehost.com/?fid=745849072291681637
Test it & tell.
Click to expand...
Click to collapse
Thank you very much. :good::good::good:
I'll Test it , and report.
best Regards.

dr.bathman said:
v2.3
Changelogs: Fixed wrong version code.
Download link:
https://www.androidfilehost.com/?fid=962021903579485394
Click to expand...
Click to collapse
Installed v2.3 over v2.2, but in magisk manager appears v.2.2
Arm64
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
jordirpz said:
Installed v2.3 over v2.2, but in magisk manager appears v.2.2
Arm64
Click to expand...
Click to collapse
Unistalled v2.2, and installed v2.3.
v2.2 appears in magisk manager
Arm64

I have magisk anager 5.4(57) and magisk 14 but I don't have this module listed (already deleted cach deposit) searched all the keywords but nothing
also if I get it working do we have to flash a new version everytime the dialer or contact app are updated or just installing new apps versions from apkmirror ?

sheraro said:
I have magisk anager 5.4(57) and magisk 14 but I don't have this module listed (already deleted cach deposit) searched all the keywords but nothing
also if I get it working do we have to flash a new version everytime the dialer or contact app are updated or just installing new apps versions from apkmirror ?
Click to expand...
Click to collapse
Listed where? And this is not in official magisk module repo. You need to flash it manually after downloading from here.

jordirpz said:
Installed v2.3 over v2.2, but in magisk manager appears v.2.2
Arm64
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
Unistalled v2.2, and installed v2.3.
v2.2 appears in magisk manager
Arm64
Click to expand...
Click to collapse
Ok.. thanks for report, renamed it to v2.2
Actually there was only a writo changed in v2.3 so i reverted name v2.2 for v2.3

dr.bathman said:
Ok... Here the test file... for arm32 devices..
https://www.androidfilehost.com/?fid=745849072291681637
Test it & tell.
Click to expand...
Click to collapse
Well !!! Here the report.
1. It installed very well in TWRP.
2. Booting to "System" made a massive Optimization of 133 app's , coz of "com.google.android.dialer.support.jar" file , No Problem. :fingers-crossed:
3. Contacts app Installed and Working very well. :good:
4. Phone[Dialer] app Installed and not working , It's force closing for every start.
5. Message app on other hand it did not install and installing manually from your zip file also fail's saying "App not Installed" error.
I have fixed it back by disabling the module.
Best Regards.

Dark❶ said:
Well !!! Here the report.
1. It installed very well in TWRP.
2. Booting to "System" made a massive Optimization of 133 app's , coz of "com.google.android.dialer.support.jar" file , No Problem. :fingers-crossed:
3. Contacts app Installed and Working very well. :good:
4. Phone[Dialer] app Installed and not working , It's force closing for every start.
5. Message app on other hand it did not install and installing manually from your zip file also fail's saying "App not Installed" error.
I have fixed it back by disabling the module.
Best Regards.
Click to expand...
Click to collapse
Phone & messaging apps are not working for you because of wrong apps for your phone. Provide me phone maximum resolution, android version you're using.

Dark❶ said:
Well !!! Here the report.
1. It installed very well in TWRP.
2. Booting to "System" made a massive Optimization of 133 app's , coz of "com.google.android.dialer.support.jar" file , No Problem. :fingers-crossed:
3. Contacts app Installed and Working very well. :good:
4. Phone[Dialer] app Installed and not working , It's force closing for every start.
5. Message app on other hand it did not install and installing manually from your zip file also fail's saying "App not Installed" error.
I have fixed it back by disabling the module.
Best Regards.
Click to expand...
Click to collapse
Thanks for testing
Try this new one..
https://www.androidfilehost.com/?fid=962021903579485675

dr.bathman said:
Listed where? And this is not in official magisk module repo. You need to flash it manually after downloading from here.
Click to expand...
Click to collapse
flashed v2.3 with magisk manager but the result -> all modules got deleted and couldn't install them again (instalation of a module goes well but that module isn't listed as installed even after reboot/delete magisk's cach/delete magisk's data), I solved the issu by uninstalling completly magisk and reinstalling it again. Didn't try to flash through recovery though (too afraid to reinstall all my modules again !)

sheraro said:
flashed v2.3 with magisk manager but the result -> all modules got deleted and couldn't install them again (instalation of a module goes well but that module isn't listed as installed even after reboot/delete magisk's cach/delete magisk's data), I solved the issu by uninstalling completly magisk and reinstalling it again. Didn't try to flash through recovery though (too afraid to reinstall all my modules again !)
Click to expand...
Click to collapse
Flash the module directly from twrp, this won't happen, this happens randomly with new magisk manager 5.4

dr.bathman said:
Thanks for testing
Try this new one..
https://www.androidfilehost.com/?fid=962021903579485675
Click to expand...
Click to collapse
Thanks , I'll try this One. :good:
BTW,
My Phone Andy Ver : Android 6.0 (Marshmallow, API 23) :angel:
I'll get my Max Resolution with DPI soon...
EDIT: Screen Resolution : 720x1280 pix's & Density : 320 DPI.
Best Regards. :good:

dr.bathman said:
Flash the module directly from twrp, this won't happen, this happens randomly with new magisk manager 5.4
Click to expand...
Click to collapse
it did work thanks
For updates, the apps can be updated through playstore ? apkmirror ? or updated zip ?

sheraro said:
it did work thanks
For updates, the apps can be updated through playstore ? apkmirror ? or updated zip ?
Click to expand...
Click to collapse
Yes, can be updated.
Delete that module &
Try this new one, install from magisk manager & tell me similar issue happens or not..
https://www.androidfilehost.com/?fid=889964283620759066
(If similar issue happens, just go to twrp & flash module & all your modules will be back + this module will also appear)

dr.bathman said:
Yes, can be updated.
Delete that module &
Try this new one, install from magisk manager & tell me similar issue happens or not..
https://www.androidfilehost.com/?fid=889964283620759066
(If similar issue happens, just go to twrp & flash module & all your modules will be back + this module will also appear)
Click to expand...
Click to collapse
ok it worked great through magisk manager with the latest 2.2.1 version, no modules disapearing bug

[Module][UPDATED] AirAudio System-Audio Mode

What's good everyone!
I use the AirAudio app and pretty much enjoy streaming my music from services (such as Spotify) to any capable device at home, work or at my friend's house.
Now the module itself hasn't been updated and isn't compatible with the latest version of Magisk (v16), so I went ahead and made it compatible with it.
It'll be attached to this thread, simply download and install it manually.
I'll also try and upload it to the repository.
Note:
I am NOT affiliated with AirAudio.
I'm simply a user like you. I just noticed it's outdated and updated it.
Note for Moderators:
In case the actual AirAudio dev reaches out to you, let me know and feel free to close this thread.
In the meantime, I'd like users to use my updated module to use their app to the full extent.
--
Credits:
AirAudio Devs - AirAudio ; Original Magisk Module
topjohnwu - Magisk, Magisk template
Me? - Update

I have installed it in LOS 15.1. How to use it? Can't see an UI?

I loved!

How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk

karstensson said:
How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk
Click to expand...
Click to collapse
you have to use both together. This module allows the app to use the "system mode" from the app and get the sound directly internally to send it over the wlan. The other mode from air audio is much worse as it is has to play the sound over the speaker and record it over the microphone.
For me this Magisk package is working wonderful: just installing this module. Afterwards the app from the Playstore and voila: I am able to play music from my phone to most every wifi-based receivers. The app is worth every cent!

works on s9/s9+?

speckdeckel said:
works on s9/s9+?
Click to expand...
Click to collapse
It should work with any phone regardless because it depends onAirAudio itself.

knojap said:
I have installed it in LOS 15.1. How to use it? Can't see an UI?
Click to expand...
Click to collapse
There's no UI to it, it just enables the system-mode in AirAudio, yoiu'll have to check the app to see the option.
This module basically re-enables it.

Not working for me
Hello
I have a oneplus 6 running magisk 17.1
The module does not work for me. Airaudio never requests root privileges, is that the problem

Nope, that's why you use this module!
In the AirAudio app > Settings > System Audio button must be green.
Sent with much love & Android. OnePlus 5T

v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.

How do you downgrade I can't seem to find V2? Thanks

megatron_lives said:
How do you downgrade I can't seem to find V2? Thanks
Click to expand...
Click to collapse
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing

gkornaks said:
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing
Click to expand...
Click to collapse
Thank you very much. Where did you get this or do you have a backup?

megatron_lives said:
Thank you very much. Where did you get this or do you have a backup?
Click to expand...
Click to collapse
Got a backup.

gkornaks said:
v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.
Click to expand...
Click to collapse
I have today the same experience with my oneplus 6 under Oreo. Uninstall v3 and install v2: everything works as expected again in system mode.

Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass

funtax said:
Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass
Click to expand...
Click to collapse
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?

gkornaks said:
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?
Click to expand...
Click to collapse
The module should already be up to date now but I can't check it right now because my current device isn't rooted.
One user is reporting it's still not working but this might be related to another issue with Magisk.
Please check if v4+ is available inside Magisk Manager and contact me at [email protected] if you face any issues

I have same issuewith v4: reverting to v2 works.

Xposed for Android Pie [+Modules Test]

Old: not maintained anymore
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
https://github.com/ElderDrivers/EdXposed/releases/
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
UPDATE: installed Edxposed 0.2.9.8 and EdXposed installer, thing are smoother now
for me it looks like these modules are
Working
- MinMinGuard
- Youtube Background Playback 2.0.5
- Youtube Adaway
- Xposed Edge
Not Working
- Statusbar Download Progress
- Download redirection (makes xposed installer not detecting that xposed is installed - so destroys all xposed functionality)

Complete list of working/not working modules here https://forum.xda-developers.com/xposed/list-xposed-modules-android-pie-ed-t3892768

When I install xposed installer, it bootloops...

Kellwa said:
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
for me it looks like these modules are
Working
MinMinGuard
Youtube Background Playback 2.0.5
Youtube Adaway
Not Working
Statusbar Download Progress
Xposed Edge (bootloop)
Click to expand...
Click to collapse
It doesn't work me, it bootloops, maybe because i have substratum installed?

HC4Life said:
It doesn't work me, it bootloops, maybe because i have substratum installed?
Click to expand...
Click to collapse
me too i have substratum installed and they are working together
but to be more sure try to install it directly after a clean system before any other magisk module or any other system tweaks

YassGo said:
When I install xposed installer, it bootloops...
Click to expand...
Click to collapse
is it the xposed installer mentioned in the other thread , its modified one to read magisk xposed
for me no bootloop

Kellwa said:
me too i have substratum installed and they are working together
but to be more sure try to install it directly after a clean system before any other magisk module or any other system tweaks
Click to expand...
Click to collapse
It works fine now.
Thx!

can you test oxygen slider? i was using this before android pie becouse my slider got stuck on silence and i cant find any replacement on ebay of the phisycal slider.
https://play.google.com/store/apps/details?id=com.seveilith.oxygen.slider&hl=es_419

:DVAMOLMONTE said:
can you test oxygen slider? i was using this before android pie becouse my slider got stuck on silence and i cant find any replacement on ebay of the phisycal slider.
https://play.google.com/store/apps/details?id=com.seveilith.oxygen.slider&hl=es_419
Click to expand...
Click to collapse
i tried it with OOS 9.0.5
the app is detecting xposed
but is not affecting the slider function
i think because the oos version

How do I install it? I used to have it in android 8, but with the update i lost it... I'm afraid to install it and bootloop my phone or brick it...
screenshot: https://imgur.com/zNJ5H1n

xchikyx said:
How do I install it? I used to have it in android 8, but with the update i lost it... I'm afraid to install it and bootloop my phone or brick it...
screenshot: https://imgur.com/zNJ5H1n
Click to expand...
Click to collapse
if you go to Magisk Manager, Download Section, search for (Riru -EdXposed)
and you find all the instructions there
Cheers )

EdXposed
Which EdXposed did you use? SandHook or Yahfa?
Thanks

maverickmod said:
Which EdXposed did you use? SandHook or Yahfa?
Thanks
Click to expand...
Click to collapse
now i use Yahfa, but i tried both and they work, honestly i dont see the difference, but as the developer said , try both and stick with the one you find smoother
Cheers

Hi,
Please add the following modules to working list:
1. NekoSMS - https://github.com/apsun/NekoSMS
2. XPrivacylua

Im currently using this app, works well with the last oos update 28/oct/2019
https://play.google.com/store/apps/details?id=Orion.Soft

Status Bar Icons
Kellwa said:
Old: not maintained anymore
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
UPDATE: installed Edxposed 0.2.9.8 and EdXposed installer, thing are smoother now
for me it looks like these modules are
Working
- MinMinGuard
- Youtube Background Playback 2.0.5
- Youtube Adaway
- Xposed Edge
Not Working
- Statusbar Download Progress
- Download redirection (makes xposed installer not detecting that xposed is installed - so destroys all xposed functionality)
Click to expand...
Click to collapse
How did you customize your status bar icons such as WiFi and Flashlight? I've been searching with no success...

AdamTV said:
How did you customize your status bar icons such as WiFi and Flashlight? I've been searching with no success...
Click to expand...
Click to collapse
it is a substratum theme called Ethereal
https://play.google.com/store/apps/details?id=com.schnettler.ethereal

when i use riru-core 19.6, edexposed 0.4.6.0-beta and magisk 20.2 i get bootloop. What versions to use to avoid this? For OxygenOS 9.0.9

Try edxposed 0.4.5.1 4463. It works for me on OOS 9.0.10

top magisk modules

Just rooted my Pixel 3a last night running Android Q Beta 6. What are some good magisk modules that I should install to make the Pixel 3a even better? Thanks

Active Edge Mod for Pixel Devices - allows you to customize the side sensor buttons. I have it set up to the default Google assistant except when the camera is open - then it takes a picture.
Viper4 AndroidFX - there are several versions available. They all use the same driver and have the same options. The difference is is only in the GUI.
Vanced Youtube - provides ad free Youtube experience.
Advanced Charging Controller (by VR25) - allows a user to customize how and when the phone is charged. It helps prolong the battery life.
Systemless Hosts - more of a Magisk setting, but it does install this module. Allows ad blocking through Adaway or similar ad blocking app.

sic0048 said:
Active Edge Mod for Pixel Devices - allows you to customize the side sensor buttons. I have it set up to the default Google assistant except when the camera is open - then it takes a picture.
Viper4 AndroidFX - there are several versions available. They all use the same driver and have the same options. The difference is is only in the GUI.
Vanced Youtube - provides ad free Youtube experience.
Advanced Charging Controller (by VR25) - allows a user to customize how and when the phone is charged. It helps prolong the battery life.
Systemless Hosts - more of a Magisk setting, but it does install this module. Allows ad blocking through Adaway or similar ad blocking app.
Click to expand...
Click to collapse
note that active edge mod isn't working for Q beta 6 yet, and i haven't been able to get viper working on Q yet, although ymmv i suppose.

c_tho said:
note that active edge mod isn't working for Q beta 6 yet, and i haven't been able to get viper working on Q yet, although ymmv i suppose.
Click to expand...
Click to collapse
Good call. After trying Beta 4 for a brief period of time, I went back to Pie so I'm out of the loop on what works and doesn't work with the beta.

sic0048 said:
Good call. After trying Beta 4 for a brief period of time, I went back to Pie so I'm out of the loop on what works and doesn't work with the beta.
Click to expand...
Click to collapse
the active edge guy is SUPER on the ball and posts updated versions in his telegram group if you're that way inclined. but yeah youtube vanced is my only functioning module right now. i'm sure most of them will be updated for Q in the coming months.

I'm a fan of energized pro for ad blocking, but you'll need the systemless hosts and BusyBox modules for it to work. These days I root my phone mainly for ad blocking.

for Vanced Youtube, is there a different module needed for it to work? I installed it in my Pixel 3a Rooted/Bootloader unlock, and the app was not even showing up

omiCar said:
for Vanced Youtube, is there a different module needed for it to work? I installed it in my Pixel 3a Rooted/Bootloader unlock, and the app was not even showing up
Click to expand...
Click to collapse
is disabled, if you have disabled normal youtube. enable it in settings

dark90_ said:
is disabled, if you have disabled normal youtube. enable it in settings
Click to expand...
Click to collapse
I figured it out, seems like I had to uninstall the Normal Youtube app, after I did that, I rebooted my phone and it worked

omiCar said:
I figured it out, seems like I had to uninstall the Normal Youtube app, after I did that, I rebooted my phone and it worked
Click to expand...
Click to collapse
I don't think you need to uninstall the actual Youtube app, but you do need to uninstall any "updates" for the Youtube app. I've found that after installing the Magisk module, I can go into the Playstore and pull up the Youtube app. There will be a "uninstall updates" button where the normal uninstall button would be. However you need to install the module first. Otherwise the button will uninstall the app instead of uninstalling the updates.
That's been my experience at least.....

Viper4 Android
Has anyone gotten Viper4 Android working on Android 10?

Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.

Pablito_097 said:
Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.
Click to expand...
Click to collapse
Do you happen to have it, all I can find is the 2.7.1.0 zip

kc6wke said:
Do you happen to have it, all I can find is the 2.7.1.0 zip
Click to expand...
Click to collapse
Here you have the APK. Install it and then the driver installation should install the magisk module.

I have the 2.7.1.0 version of Viper4Android installed and working just fine on Android 10. It was installed and working on Android 9 and it continued to work when I upgraded to Android 10. I sideloaded the .020 version of the Android 10 OTA image.
The Magisk module was last updated on May 31, 2019, so it obviously hasn't specifically been updated for Android 10. Perhaps it won't install on Android 10, but will work if upgraded from Android 9. I also have the Audio Modification Library module and the Audio Compatibility Patch module installed as well. Perhaps that makes a difference?????

Pablito_097 said:
Here you have the APK. Install it and then the driver installation should install the magisk module.
Click to expand...
Click to collapse
Doesn't work unfortunately.

Viper4Android settings
Can anyone share your best-sound settings for viper4adnroid? Bluetooth profile especially

eightace said:
Doesn't work unfortunately.
Click to expand...
Click to collapse
Apologies it does

Pablito_097 said:
Yes. You have to install V4A FX v2.7.0.0 because v2.7.1.0 driver installation is broken on Q for now.
Click to expand...
Click to collapse
I'm using V4A 2.7.1.0 on Q and it's working fine. I had to flash Ainur, Audio Modification Library and Audio Compatibility Patch to get it work though!
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
i root SGH i777 said:
Just rooted my Pixel 3a last night running Android Q Beta 6. What are some good magisk modules that I should install to make the Pixel 3a even better? Thanks
Click to expand...
Click to collapse
Open Magisk, go into settings, scroll down and click on Systemless Hosts, reboot, then install Adaway. Boom! system wide adblocking.
adaway.org
YouTube vanced is a must, too.

Y'all seem to have forgotten QuickSwitch ??
Sent from my Google Pixel 3a XL using XDA Labs