Database Develop

Official Update: Verification failed.

Hi all,
I've unlocked the bootloader on my Nexus One.
I got the message that there was a new froyo update. When I try to install I got this error: "Verficiation failed".
Is there a way to install this new update, like a force on the verficition check or installing the official bootloader again?
Thanks in advance.
Regards,
Dirk

Do you have a custom recovery?

?
From what I've read you may not want to update, being the main fix is to disable/make it more difficult to root. You may want to for your own reasons, idk. Just putting it out there.

First, thanks for the reply's.
Do you have a custom recovery?
Click to expand...
Click to collapse
It could be that I have a custom recovery (I've followed a manual, and there was a step to choose for Nexus bootloader or Cyonogenmod bootloader. I've choosed Nexus.
Is there a way to get the official custom recovery back?
I don't have a custom rom.
From what I've read you may not want to update, being the main fix is to disable/make it more difficult to root. You may want to for your own reasons, idk. Just putting it out there.
Click to expand...
Click to collapse
This update does'nt make sense, but I like to have gingerbread when it comes out.
Thanks!

dirkjanneman said:
Is there a way to get the official custom recovery back?
I don't have a custom rom.
Click to expand...
Click to collapse
Yeah grab one from the FRF91 image on http://developer.htc.com and flash it via fastboot.

Rusty! said:
Yeah grab one from the FRF91 image on http://developer.htc.com and flash it via fastboot.
Click to expand...
Click to collapse
Thanks again.
I think I have to unzip that file and then :
fastboot flash boot boot.img
?

fastboot flash recovery recovery.img

Rusty! said:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Yeah! It Works. Thank you!!!

[Q] (Q)How to install the official 4.2.2 update with root

Ive downloaded the 4.2.2 official update on my HTC one,When I click install now it goes into TWRP and doesnt allow me to update.
Do I need to flash the custom recovery to update?
and if so will I need to flash TWRP later after upgrading or is there another way?
Can I locate the update file on TWRP and install it ?

AHD393 said:
Ive downloaded the 4.2.2 official update on my HTC one,When I click install now it goes into TWRP and doesnt allow me to update.
Do I need to flash the custom recovery to update?
and if so will I need to flash TWRP later after upgrading or is there another way?
Can I locate the update file on TWRP and install it ?
Click to expand...
Click to collapse
i've got the same question but i have cwm, didn't want to start a new thread.
following this one now

AHD393 said:
Ive downloaded the 4.2.2 official update on my HTC one,When I click install now it goes into TWRP and doesnt allow me to update.
Do I need to flash the custom recovery to update?
and if so will I need to flash TWRP later after upgrading or is there another way?
Can I locate the update file on TWRP and install it ?
Click to expand...
Click to collapse
You SHOULD have STOCK recovery in order to flash/install the OTA

mathrania said:
You SHOULD have STOCK recovery in order to flash/install the OTA
Click to expand...
Click to collapse
And how do I do that?

AHD393 said:
And how do I do that?
Click to expand...
Click to collapse
Search for the stock recovery, download it, flash it with the phone in fsstboot mode.
fastboot flash recovery recoveryfilename
This should be documented in the returning to stock sticky thread. Or one of the other many similar questions here.

AHD393 said:
And how do I do that?
Click to expand...
Click to collapse
you need to find the Stock recovery..... and flash it in fastboot mode....
Fasboot flash recovery recovery_name.img

mathrania said:
you need to find the Stock recovery..... and flash it in fastboot mode....
Fasboot flash recovery recovery_name.img
Click to expand...
Click to collapse
And then Ill need to flash TWRP again and root?

AHD393 said:
And then Ill need to flash TWRP again and root?
Click to expand...
Click to collapse
after you are done with the OTA, .... Unlock the bootloader again, and then whichever recovery you like you can go for it..

mathrania said:
after you are done with the OTA, .... Unlock the bootloader again, and then whichever recovery you like you can go for it..
Click to expand...
Click to collapse
alright got it,
Can you link a thread where theres a download link for the stock recovery,I cant find it
I downloaded the file on http://forum.xda-developers.com/showthread.php?p=38504123
but it has two android recoveries apart from the custom ones

Bump
Bump! Following as well!

[Q] Problem unlock bootloader and root sony xperia t

Before i unlocked the bootloader and rooted the phone without problem, when the update 4.3 was arriving i decided to relock the bootloader and flash a jelly bean firmware for update it by pc companion. Now i decided to unlock again to install omnirom, i flashed 4.1.2 firmware and then i tried to unlock bootlader but when the process is finished and i turned on the phone it doesn't boot, the animation is blocked and the phone will restart. So i flashed again 4.1.2 firmware, it turned on and in the service info --> configuration the phone said that the bootlader is unlocked, at this point i tried to root but i received lines of "impossible" on the terminal, i was be able to do all this one month ago but now i can't understand where is the problem. Someone have any idea??
Thanks in advance and sorry for my english

Bootloader unlocked allowed: yes
Or it says
Bootloader unlocked?

nlooooo said:
Bootloader unlocked allowed: yes
Or it says
Bootloader unlocked?
Click to expand...
Click to collapse
Now it says bootloader unlocked allowed: yes because when i saw that the root didn't work i relocked the bootlader and flashed a 4.3 ftf file, it's the first time that the phone does this thing

xxfraxx said:
Before i unlocked the bootloader and rooted the phone without problem, when the update 4.3 was arriving i decided to relock the bootloader and flash a jelly bean firmware for update it by pc companion. Now i decided to unlock again to install omnirom, i flashed 4.1.2 firmware and then i tried to unlock bootlader but when the process is finished and i turned on the phone it doesn't boot, the animation is blocked and the phone will restart. So i flashed again 4.1.2 firmware, it turned on and in the service info --> configuration the phone said that the bootlader is unlocked, at this point i tried to root but i received lines of "impossible" on the terminal, i was be able to do all this one month ago but now i can't understand where is the problem. Someone have any idea??
Thanks in advance and sorry for my english
Click to expand...
Click to collapse
Do factory reset and then flash your favorite custom rom. :laugh:

Krishanshu said:
Do factory reset and then flash your favorite custom rom. :laugh:
Click to expand...
Click to collapse
No, first he has to unlock his bootloader again, otherwise his phone will be hard bricked!!

Krishanshu said:
Do factory reset and then flash your favorite custom rom. :laugh:
Click to expand...
Click to collapse
St.Jimmy90 said:
No, first he has to unlock his bootloader again, otherwise his phone will be hard bricked!!
Click to expand...
Click to collapse
But when i flash a ftf file with flashtool it doesn't do already a factory reset?? And why before i didn't have any kind of problem but i have these problems only now??

xxfraxx said:
But when i flash a ftf file with flashtool it doesn't do already a factory reset?? And why before i didn't have any kind of problem but i have these problems only now??
Click to expand...
Click to collapse
You have to check on flashtool to wipe everything for a factory reset. In your case I would flash a stock rom, unlock the bootloader via flashtool and then install a custom rom

St.Jimmy90 said:
You have to check on flashtool to wipe everything for a factory reset. In your case I would flash a stock rom, unlock the bootloader via flashtool and then install a custom rom
Click to expand...
Click to collapse
And this is what i did, i flashed a jelly bean stock rom then i unlocked the bootlader but when i turned on the phone it didn't boot, so i flashed again a stock rom and it said that the bootloader is unlocked so i proceeded with the root but i had error messages

xxfraxx said:
And this is what i did, i flashed a jelly bean stock rom then i unlocked the bootlader but when i turned on the phone it didn't boot, so i flashed again a stock rom and it said that the bootloader is unlocked so i proceeded with the root but i had error messages
Click to expand...
Click to collapse
How do you try to root? Do you want to install a custom rom? If you want to install a custom rom do the following:
1. flash the kernel from the custom rom
2. boot into that kernel and flash the custom rom zip file
3. wipe cache and dalvik
4. flash supersu zip file
If you want to stay stock but with root and are on 4.3:
1. flash the kernel of a custom rom
2. boot into that kernel and flash supersu zip file
3.reflash the stock kernel (excule everything else)

St.Jimmy90 said:
How do you try to root? Do you want to install a custom rom? If you want to install a custom rom do the following:
1. flash the kernel from the custom rom
2. boot into that kernel and flash the custom rom zip file
3. wipe cache and dalvik
4. flash supersu zip file
If you want to stay stock but with root and are on 4.3:
1. flash the kernel of a custom rom
2. boot into that kernel and flash supersu zip file
3.reflash the stock kernel (excule everything else)
Click to expand...
Click to collapse
Yes i want to install a custom rom, i tried to root the phone using doomlord easy rooting toolkit to intall later the cwm, i know that if i do like you say i can install custom rom more fast, in less passages, but before i did this passages for root the phone and it worked but now after i unlock bootloader the phone doesn't start and i must flash again a stock rom with flashtool to make it work again, i know that then if i see in the phone i have the same the bootloader unlock but this isn't normal and after this new problem also the root doesnt' work
I hope that you can understand what i mean also if my english is bad
Yes maybe i can stay on 4.3 stock rom but to flash a custom kernel i must unlock the bootloader and we arrive at the same point of before, i'm not sure that the unlock works well

xxfraxx said:
Yes i want to install a custom rom, i tried to root the phone using doomlord easy rooting toolkit to intall later the cwm, i know that if i do like you say i can install custom rom more fast, in less passages, but before i did this passages for root the phone and it worked but now after i unlock bootloader the phone doesn't start and i must flash again a stock rom with flashtool to make it work again, i know that then if i see in the phone i have the same the bootloader unlock but this isn't normal and after this new problem also the root doesnt' work
I hope that you can understand what i mean also if my english is bad
Yes maybe i can stay on 4.3 stock rom but to flash a custom kernel i must unlock the bootloader and we arrive at the same point of before, i'm not sure that the unlock works well
Click to expand...
Click to collapse
So on 4.1.2 easy rooting doesn't work? Umm, are you sure you're following it step by step? (If I remember correctly there are 2 ways, one for locked and one for unlocked bootloader, you have to use the one for unlocked bootloader)

St.Jimmy90 said:
So on 4.1.2 easy rooting doesn't work? Umm, are you sure you're following it step by step? (If I remember correctly there are 2 ways, one for locked and one for unlocked bootloader, you have to use the one for unlocked bootloader)
Click to expand...
Click to collapse
No there is only one method for both and yes i followed the instructions step by step infact before relocking the bootlader and flash the stock rom i had the omnirom on the phone. It's not normal that when i unlock the bootloader the phone doesn't boot or i'm wrong?? Infact from when i have this problem i also have problem with root

xxfraxx said:
No there is only one method for both and yes i followed the instructions step by step infact before relocking the bootlader and flash the stock rom i had the omnirom on the phone. It's not normal that when i unlock the bootloader the phone doesn't boot or i'm wrong?? Infact from when i have this problem i also have problem with root
Click to expand...
Click to collapse
Dude that's a weird thing going on with your phone... Sorry but I can't help you on that

St.Jimmy90 said:
Dude that's a weird thing going on with your phone... Sorry but I can't help you on that
Click to expand...
Click to collapse
The problem is that it does it only now, thanks the same mate

xxfraxx said:
The problem is that it does it only now, thanks the same mate
Click to expand...
Click to collapse
You're welcome

St.Jimmy90 said:
No, first he has to unlock his bootloader again, otherwise his phone will be hard bricked!!
Click to expand...
Click to collapse
Ok. My mistake. Sorry.
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
xxfraxx said:
But when i flash a ftf file with flashtool it doesn't do already a factory reset?? And why before i didn't have any kind of problem but i have these problems only now??
Click to expand...
Click to collapse
Nope, You've to check it manually.

Krishanshu said:
Ok. My mistake. Sorry.
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
Nope, You've to check it manually.
Click to expand...
Click to collapse
In flashtool before flashing i had already checked all the wipe

xxfraxx said:
In flashtool before flashing i had already checked all the wipe
Click to expand...
Click to collapse
Come back on stock rom.

Krishanshu said:
Come back on stock rom.
Click to expand...
Click to collapse
I'm already on stock rom, but now i want to flash omnirom but i have this problem whith the booloader and the root
Sent from my LT30p using xda app-developers app

xxfraxx said:
I'm already on stock rom, but now i want to flash omnirom but i have this problem whith the booloader and the root
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Ok.
If I find any solution I'll let you know.

How do I change the radio and boot loader?

Go easy....
Wanting to flash some of the newer M ROMs.
Requirements are latest radio, boot loader and TWRP
How do I change those?
I'm root and twrp installed. Are there zips to flash in recovery 1st?
Steps or even a video would be HUGE, and thank you for helping.

The information is everywhere. You have to flash the radio/bootloader in fastboot mode. You can't flash them in recovery.

SirBindy said:
The information is everywhere. You have to flash the radio/bootloader in fastboot mode. You can't flash them in recovery.
Click to expand...
Click to collapse
I beg to differ :
http://forum.xda-developers.com/showthread.php?t=3066052
This is how i did it, in recovery.
It's all just an illusion

robfromga said:
Go easy....
Wanting to flash some of the newer M ROMs.
Requirements are latest radio, boot loader and TWRP
How do I change those?
I'm root and twrp installed. Are there zips to flash in recovery 1st?
Steps or even a video would be HUGE, and thank you for helping.
Click to expand...
Click to collapse
I was in a similar situation, I have MultiRom, and I wanted to preview M out without getting rid of PureNexus. So this is what I did
Download factory image for M
Make sure you have the latest android SDK!!!
extract the factory image
rename bootloader file to bootloader.img; rename radio file to radio.img
connect your device and reboot into bootloader
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
then reboot your phone, and you are good
if you are uncertain about it, take a look at flash-base.sh, or flash-all.bat, and follow those steps.

most bootloaders and radios ARE available via a flashable zips that can be flashed via twrp, you just have to look for them. otherwise, fastboot is very easy.

I found the zips and flashed them with flashify. How do I know if it took? What is the radio listed under settings?
Settings-about phone-?

robfromga said:
I found the zips and flashed them with flashify. How do I know if it took? What is the radio listed under settings?
Settings-about phone-?
Click to expand...
Click to collapse
If you flashed the marshmallow radio, the baseband should end in .27r.
It's all just an illusion

robfromga said:
I found the zips and flashed them with flashify. How do I know if it took? What is the radio listed under settings?
Settings-about phone-?
Click to expand...
Click to collapse
i dont think you can flash the bootloader via flashify.

Does flashing marshmallow factory image not update the boot loader and radio with it ? Ie flashing marshmallow from NRT toolkit ?

bigup7 said:
Does flashing marshmallow factory image not update the boot loader and radio with it ? Ie flashing marshmallow from NRT toolkit ?
Click to expand...
Click to collapse
if you flash the whole thing it does.

simms22 said:
if you flash the whole thing it does.
Click to expand...
Click to collapse
Ahh great. Had me confused for a bit

bigup7 said:
Ahh great. Had me confused for a bit
Click to expand...
Click to collapse
if youre rooted, and dont want to go through the process again, and dont want to lose your data, all you have to do is flash the boot.img and the system.img to update the rom. and then reflash supersu in twrp

Right baseband?

robfromga said:
Right baseband?
Click to expand...
Click to collapse
That's what I have. You should be good.
It's was all just an illusion

Sweet!
So if I'm understanding everything, I'm now on the latest update of TWRP ,bootloader and radio....so its OK to flash M?

Yep
It's was all just an illusion

Data deleted, twrp up and running, phone unlocked - HELP

I want a clean install on my mate 20.
I have unlocked bootloader and want to install stock rom with root prevs.
My current install process:
I first
flash with twrp
then remove encryption
then wipe cache/dalvik
then format data,
then install romaur v1.x from twrp.
when get into emui i use emui flasher1.1apk to go to the firmware i want.
This process takes to long and what file-format does the firmware need to be in order to install stock rom from twrp??
I love the romaur, but there are some components removed from the rom that i have gotten used to in emui.
The rom is ultra fast tough! (sorry Aur)
So how to makes this work:
TWRP
Format data
clear cache/dalvik
install 9.0.0.xxx (optional rom)
Finish with a clean install and then root with patched_boot.img
Then install magisk ++++
Any ideas? Hope my post makes sense.
Regards, Kenneth, Norway
#mate20problackincludeNMstorage

I guessing there is no way to install stock rom from twrp then??
???

how about using hstool to upgrade to the latest firmware and then unlock bootloader and flash patched magisk to recovery_ramdisk partition.
and if you want twrp you can flash it to ercovery partition

Daniehabazin said:
how about using hstool to upgrade to the latest firmware and then unlock bootloader and flash patched magisk to recovery_ramdisk partition.
and if you want twrp you can flash it to ercovery partition
Click to expand...
Click to collapse
With HStool does The bootloader get locked again?
Sure that sounds good. I Will try. Does it update or wipe clean to install??

fromiOS2Android said:
With HStool does The bootloader get locked again?
Sure that sounds good. I Will try. Does it update or wipe clean to install??
Click to expand...
Click to collapse
i'm not sure but i think the bootloader get's locked, and when you unlock the bootloader the phone get's wiped.
when i had locked bootloader and used hstool to update between versions my data was not wiped.

Daniehabazin said:
i'm not sure but i think the bootloader get's locked, and when you unlock the bootloader the phone get's wiped.
when i had locked bootloader and used hstool to update between versions my data was not wiped.
Click to expand...
Click to collapse
Ok. Thanks. Just grotten used to using twrp now, but i'll try HStool next update?? thanks again

fromiOS2Android said:
Ok. Thanks. Just grotten used to using twrp now, but i'll try HStool next update?? thanks again
Click to expand...
Click to collapse
no problem