Hello,
I have a Meizu terminal, which you can root just from a setting in the rom stock. Today I changed from Flyme version , Meizu customization layer, and when I went to install SuperSU, it said SU binay occupied.
I have saw the solution to this that is to flash SuperSU.zip from the recovery but this phone does not have any developed recovery, just the stock recovery which dont allow to flash zip files.
The Meizu's root manager works a bit strange and not always launches applications with root. So this error has happened to someone? Or have anybody any solution?
Thanks in advance
I can grant root permision to Termux terminal, any way to run as root from there?
xChechu said:
Hello,
I have a Meizu terminal, which you can root just from a setting in the rom stock. Today I changed from Flyme version , Meizu customization layer, and when I went to install SuperSU, it said SU binay occupied.
I have saw the solution to this that is to flash SuperSU.zip from the recovery but this phone does not have any developed recovery, just the stock recovery which dont allow to flash zip files.
The Meizu's root manager works a bit strange and not always launches applications with root. So this error has happened to someone? Or have anybody any solution?
Thanks in advance
Click to expand...
Click to collapse
I have a MEIZU m5s and with the new Flyme version the problem occur is the same..
Sorry for the bad English..
xChechu said:
Hello,
I have a Meizu terminal, which you can root just from a setting in the rom stock. Today I changed from Flyme version , Meizu customization layer, and when I went to install SuperSU, it said SU binay occupied.
I have saw the solution to this that is to flash SuperSU.zip from the recovery but this phone does not have any developed recovery, just the stock recovery which dont allow to flash zip files.
The Meizu's root manager works a bit strange and not always launches applications with root. So this error has happened to someone? Or have anybody any solution?
Thanks in advance
Click to expand...
Click to collapse
hi, i have a meizu pro 6（not plus）and i have exactly the same problems, i have flash the last flyme version 6.3.0.0G, restore my apps from meizu backup and roots from setting, at this step all work fine but my probs its than i need xposed, so the admin of official meizu groups on telegram give me a special xposed frameworks installer specialy for meizu, then i can install it with success and download/activate my module, but after that i lose my roots right （i am style rooted on meizu setting but when i open by example adaway, the apps say i am not roots, same for root checker and the both was workink fine before xposed installation..）so i have install SuperSu （lastest version from google play）but all time same （binary occupied..）so to finish i have look few yt videos and see than many people fix that with the installation of old version 2.79 of SuperSu, then i have try but still same.. so now i really don´t know how to fix that.. please, someone can help us？thanks in advance
Related
After installing the magisk as I was rooted, I installed 2-3 mods ie flashed in twrp but after I rebooted my root is gone. Magisk manager is showing not rooted and when I re flashed supersu in twrp, installation was successful but still no root. What happened I don't know. Also I didn't install any phh supersu or busybox. Please help me regain my root.
HELP
It was a known bug in Magisk that you would lose root.
Magisk
v10.2
- [Magic Mount] Remove apps/priv-app from whitelist, should fix all crashes
- [phh] Fix binary out-of-date issue
- [scripts] Fix root disappear issue when upgrading within Magisk Manager
Click to expand...
Click to collapse
So i'd make sure you flashed the latest version ? Pretty sure you have but if not might be worth flashing supersu then magisk over it again as it should recognise supersu and not modify it.
brichardson1991 said:
It was a known bug in Magisk that you would lose root.
So i'd make sure you flashed the latest version ? Pretty sure you have but if not might be worth flashing supersu then magisk over it again as it should recognise supersu and not modify it.
Click to expand...
Click to collapse
Yeah I just installed the latest version 10.2 via play Store. Help me regain my root
Vaibhunk786 said:
Yeah I just installed the latest version 10.2 via play Store. Help me regain my root
Click to expand...
Click to collapse
After installing from play store, did you "FLASH" magisk ?
brichardson1991 said:
After installing from play store, did you "FLASH" magisk ?
Click to expand...
Click to collapse
No I didn't flash anything. It was an automatic process which installed magisk and prompted me that installation success and reboot. Then I rebooted and root was gone
Now should I run magisk unstaller zip in twrp followed by supersu and then again flash magisk v10. 2 via twrp.. Should I follow these steps to gain my root again.. Anyone please help. I'm stuck @brichardson1991
Try installing PHH superuser from play store.
I had a similar experience. Having to reflash stock now to try a different tact. I'd rather use SuperSU to be honest, rather than PHH superuser.
Same problem here, have to investigate whats going on.
MattBooth said:
I had a similar experience. Having to reflash stock now to try a different tact. I'd rather use SuperSU to be honest, rather than PHH superuser.
Click to expand...
Click to collapse
yeah flashing the stock rom was the only viable option i think .
I have the same problem with latest magisk. After i installed mods root is gone and i can not root again. Only with supersu i have root. Magisk is very bugy.
Yeah it does appear the latest version now causes you to lose supersu
Same problem with me, on the OP3 running Open Beta 11. Reflashing SuperSU did not work. Rather than extract the boot.img to reflash that, I ended up reflashing the firmware (and ended up mistakenly using the 4.0.1 file instead of the OPB11 one!) ... Yet to try SuperSU and Magisk again on this, but figured better to investigate the issue before I attempt to reinstall.
From what I understand here, v10 won't have this problem, and its only on v11 that its cropped up again? Can anybody with v10 confirm this?
I recently updated my EVA-L09 to Android 7.0. Before that, I was rooted and I had TWRP. After I updated, I obviously would need to install TWRP and root again, but when I install it with SRK Tool or even with fastboot, it always goes back to stock recovery. I already tried to flash it by "recovery.img" as well.
Gutito said:
I recently updated my EVA-L09 to Android 7.0. Before that, I was rooted and I had TWRP. After I updated, I obviously would need to install TWRP and root again, but when I install it with SRK Tool or even with fastboot, it always goes back to stock recovery. I already tried to flash it by "recovery.img" as well.
Click to expand...
Click to collapse
that would be because the TWRP in SRK Tools is only for android 6 (EMUI 4.1 - 4.1.1) and not for android 7 (EMUI 5 - 5.1)
the recovery that you need to use in order for twrp to be installed is this one https://github.com/OpenKirin/android_device_huawei_eva/releases/download/3.1.0/twrp-3.1.0-0-eva.img
then once its installed boot up your phone and then type in "adb reboot recovery" and that will then boot your device into TWRP 3.1.0.0
Thank you, it worked!
Another question, but now related to SuperSU.
I am with the 2.79 version of SuperSU and I downloaded the binary .zip of this version and flashed it by twrp. The problem is that it keeps saying ""There is no SU binary installed and SuperSU cannot install it. This is a problem!".
I already got it to work. Thanks btw
Gutito said:
I already got it to work. Thanks btw
Click to expand...
Click to collapse
Could you post how perhaps? I had the same problem as you - the TWRP posted about fixed my first problem but now I can't get SuperSU to install either. Would be interested to know how you fixed it!
kzip said:
Could you post how perhaps? I had the same problem as you - the TWRP posted about fixed my first problem but now I can't get SuperSU to install either. Would be interested to know how you fixed it!
Click to expand...
Click to collapse
I solved it by this post https://forum.xda-developers.com/showpost.php?p=70927601&postcount=456
I ended up not using super su but If you want you can use it instead of the one suggested there
By flashing the file provided in the post, I managed to automatically get access to super user (root)
My device is BLU Dash X2 ( D110L ) running android 6.0 with Kernel Version 3.18.19.
It's an MTK phone ( MT6580 ).
I managed to port and flash TWRP custom recovery by myself and it's working find. So I decided to flash SuperSU.zip with it. Everything seem to be working perfectly but after the flashing finished and I tried to open SuperSU app a message pop up with text "There is no SU binary Installed, and SuperSU cannot install it. This is a problem. If you just upgraded to android 5.0 you need to manually re-root - consult the relevant forums for your device!".
Please help me find a solution. I tried many version of SuperSU.zip already but the same message still appear. I also tried remove SuperSU app first before re-flash SuperSU.zip. I even tried to perform a clean stock rom flash before flashing latest SuperSU.zip and it's still the same.
I have the same phone, also managed to port TWRP, working fine after edit fstab, but no way I can root this device.
Tried with phh s SuperUser instead supersu, but no avail.
My biggest regret was buy this fone, it works fine but seems impossible to root.
Sorry for late update, you can root this device with magisk, successfully done with magisk v18.00
Super su
Sent from my Samsung Galaxy Note 8 using XDA Labs
Hi Mates,
First of all sorry for my poor english, i am using Redmi Note 4 (Indian Qualcomm Sanpdragon version Version) running android version 6, i have successfully unlocked bootloader, rooted and installed TWRP in my phone, when i check the root status in root checker app it says SUCCESSFULLY ROOTED, after that i have installed Hide My Root app to hide my Su binary, there it throws a error message "cannot find su binary", this process i have tried when i was in stock ROM and now i am in linage rom 13 here with this custom rom also i am getting the same error message, i have installed un installed and again installed super su app somany times still i use to get same error eventhough i have flashed the latest super su zip and latest super su app.
I am very poor in this kind of techie works, i hope you masters people will post some solution for this error.
Thanks
118 view bot no single reply, i am facing this issue repeatedly, recently i rooted samsung galaxy j7 price even there also i got the same problem, plz let me know any solution on this.
you first have to flash aroma setup and select the option at the bottum (Default in android O+) and than supersu (minimum version 2.82 sr2) then boot ur phone. if everything works boot into twrp and flash suhide
First, hello everyone and thank you for your time.
Im pretty new about rooting and magisk, so im sorry if i am asking something that is very obvious.
I recently rooted my Huawei Honor 3C. Installed TWRP and flashed some custom ROMs I found on XDA. The problem is that i need to change from superSU root to Magisk root in a custom ROM that is built-in superSU root. Can someone explain me how can i do this?
I have tried to flash unSu.zip and flash magisk.zip, but I got this error: 'Unsupported/Unknown image format'
Thank you so much!