hi
I brick my phone now i trying to re flash the stock firmware with mi flash tool "phone just in the qdloader " with black screen a after searching i need to flash the stock firmware with mi flash tool
and he asked me to git mi authorised account can you help with thate pls my phone completely dead for three days now
if any one have mi authorised account can he give me or just do it in TeamViewer to enter his account
my email [email protected]
p.s my phone bootloader unlocked
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder
hi
Does anybody got a developer authorzied xiaomi account? Got my phone (mi 8) hard bricked and in EDL mode, got everything ready to flash fastboot image, but my account is not authorized.. I'm willing to tip you if you could help me for a few minutes
Chimera tools
My mi a2 stuck in edl state any one help me.... First i'm trying to flash miui 10.3.2.0 (mi 6x) on mi a2 in edl mode.... i flashed successfully...then i start my device it starts and suddenly go in edl state. i can't go fastboot.So, please help friends, i'm not able to go mi service center at this time, all are lockdown in home. plz help:crying::crying::crying: and sry for my english
The device is identified on the computer, if not, you will have to disassemble it, and make a test point
jeangraff30 said:
The device is identified on the computer, if not, you will have to disassemble it, and make a test point
Click to expand...
Click to collapse
Yes bro, device is identified in qc Hs 9008 but i can't flash roms....it asks edl authorisation... If i try testpoint method it asks edl authorization or not????
ajithkumarcm007 said:
Yes bro, device is identified in qc Hs 9008 but i can't flash roms....it asks edl authorisation... If i try testpoint method it asks edl authorization or not????
Click to expand...
Click to collapse
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
you have ARB 4 triggered
KevMetal said:
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
you have ARB 4 triggered
Click to expand...
Click to collapse
thank you, that worked wonders
hello I have a locked xiaomi mi 9 lite (xiaomi m1904f3bg / MI 9CC / pyxis)
I manage to activate the EDL mode and my windows recognizes it in Qualcomm on the COM port (03)
I am stuck at this stage, in this mode I cannot do anything, the adb or fastboot commands do not work the device cannot be found
Side mode Or fastboot mode its recognize on adb but , erreur lock state , thanks
how can I proceed,
thank you.
any mate help me plz ?
Thanks
Patmos77 said:
any mate help me plz ?
Thanks
Click to expand...
Click to collapse
What did you do to brick your phone?
Is your phone recognized as "Qualcomm HS-USB QDLoader" in Windows settings? Did you try to flash fastboot ROM with mi flash?
Hello sorry for the late reply but I had found the solution.
The phone was blocked mi account cloud it was impossible to flash it without the authorized account or an account certified by xiaomi,
I pay for software with it, I have access through their server to authentication at xiaomi (the only solution) ( edl mode Qualcomm usb ^)the flash was authorized at the start of the procedure, so it was impossible to do it with any other software (free) or the xiaomi official as authorization is required solve the problem in 20 minutes this way!
Thanks