Database Develop

[Magisk/Root/Xposed/Busybox]Huawei P9 Lite

-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!

Well done. Works perfect.

The are no files any more

Links are dead

deleted

Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version

Did anyone try this on Nougat/Android 7?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.

Is there anything one can do to get Pokémon Go working while having all of these installed?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)

this really helped me thanks

Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:

is this Magisk work on Huawei P9?

I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob

ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13

simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!

I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?

ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled

simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.

Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.

[ROM]Multi-Rom Tripl3t B594 Odex

http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2 + John Miller . The Lineage part is @XePeleato and the Aosp of @haky86.
Too much for you?
More novice users should not be scared because the installation and configuration is incremental and that is why I say that it fits any user profile.
User Profiles:
Depending on the concerns that are most suited to your profile you should take the installation to the point that best meets your needs.
As a user I want ...
1- I want a stock experience with some extras but without Root.
You must install the rom file by TWRP and dot. The rom is the same as the cerberus V2 but comes with no root.
It incorporates among others ..., gyroscope, call recording, multiwindow ...
REQUIRED REQUIREMENTS:
-Bootloader Unlocked.
-TWRP
- Android 6 - C432B594 Stock - Recommended.
2- I want you to have root access too.
After installing the rom you must enter the store and download the application magisk manager and ready. You already have root access and get the most out of the rom, but not only that, but root access can be hidden to play PoGo or use payment applications and pass the SafetyNet test.
3- I want to activate extra functions and transform and customize the rom butt.
Well what you have to do is install this file from TWRP point.
We will achieve the following:
- Activate Multiuser
- Enable Local Update
- You can choose whether to install the Huawei magnifier or not
- Busybox, Viper4Android and SLC disappear
- You can choose to install the busybox and the viper in a systemless way and in this way the SLC is no longer necessary
- Advanced Reset
- New lock screen 100% customizable.
- The screen automatically turns on and off when opening and closing the mobile phone case
- Incorporates system apps uninstaller
- Total Commander
- Greenify
- Etc...
4- I want to be able to choose which rom to start the smartphone.
For that it is necessary to have followed steps 1, 2 and 3 and it is necessary to configure magisk to have default access to all requests per adb and applications and install the multiboot option.
To install Dualboot you must go to the file EXTRAS.ZIP that you will find inside the system folder of the rom. Uncompress your content in the external memory and install the DualBoot app and keep the files in memory because we will need them for later.
Then we start the dualboot application to be granted superuser permissions automatically. Then with SimpleReboot we restart a recovery and make a backup of boot.img in case something goes wrong, since it will be the only thing we will need to repair a possible failure or error.
VERY IMPORTANT: We need to have 3Gb of available space in the External SD for each additional rom we want to install, that is, if we are going to install Lineage and Aosp we will need 6Gb of available space.
4.1- I want AOSP.
We must download these files and install them at the same time and in order from TWRP
- Rom
- Aniboot
- Gaaps
- Magisk
4.1- I want LineageOS.
We must download these files and install them at the same time and in order from TWRP
- Rom
- Aniboot
- Gaaps
- Magisk
4.3 I want the 3 Roms at a time.
Then follow steps 4.1 and 4.2
Restarting the system will take us directly to the last ROM installed. Once started and configured we installed the dualboot app that we had left on hand in the external SD. Repeat the operation on each of the additional roms installed. Once installed dualboot in all you can remove the app from the sd and of course all the corresponding installation files.
To change rom you have to enter the dualboot app and choose which one to start the system and restart.
MENTAL NOTE 01:
The 3 roms will have the same bugs as the originals. I am not yet qualified to fix them or even try, but I think that to be my first job is more than enough.
MENTAL NOTE 02:
The DualBoot application also installs an app called Leaks that controls possible bugs to send them to the original DualBoot developer.
I do not want to forget to give credits and thanks for:
@topjohnwu for creating magisk
@chenxiaolong for creating DualBoot and @BrainNotFound for portarlo
+ John Miller to create CerberusV2
@haky86 for creating Aosp and CWMR
@XePeleato for creating LineageOs and TWRP and Kernel
Greetings from Barcelona (Catalonia)

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2
Click to expand...
Click to collapse
Please delete, XDA app crashed while writing

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2
Click to expand...
Click to collapse
Link please :laugh::laugh::good::good:

kilroystyx said:
Link please :laugh::laugh::good::good:
Click to expand...
Click to collapse
MULTI-ROM TRIPL3T B594 ODEX
http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1
Click to expand...
Click to collapse
Why in the screenshots there is a ss with a lockscreen asking for a fingerprint to unlock? I know that no P8Lite has a fingerprint sensor

hi6120sft ale-l21 said:
Why in the screenshots there is a ss with a lockscreen asking for a fingerprint to unlock? I know that no P8Lite has a fingerprint sensor
Click to expand...
Click to collapse
Because it is cool, no more reasons sorry

I stucked on a first logo

blewko said:
I stucked on a first logo
Click to expand...
Click to collapse
Try a factory reset with stock recovery and flash again.
It helps in most cases

Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
he should work... i have magisk and xposed but on C432B596 ROM

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
It worked for me once but I think I reflashed something or so and then it didn't. After flashing it wait at least 1 hour before stopping the boot. After that, it doesn't seem to work.
xander33 said:
he should work... i have magisk and xposed but on C432B596 ROM
Click to expand...
Click to collapse
Are you passing Safety net?

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
It works. Flash Xposed and don't forget to wipe cache.
Phone will start in about 30 minutes.
It works. Use SDK 23 for this rom

Vinnipinni said:
It worked for me once but I think I reflashed something or so and then it didn't. After flashing it wait at least 1 hour before stopping the boot. After that, it doesn't seem to work.
Are you passing Safety net?
Click to expand...
Click to collapse
No with the B596 ROM (i think its related to the new security patch)
With the B588 instead you have to disable xposed reboot the phone and safety net will be ok

xander33 said:
No with the B596 ROM (i think its related to the new security patch)
With the B588 instead you have to disable xposed reboot the phone and safety net will be ok
Click to expand...
Click to collapse
I can confirm Xposed works. Not the Magisk one though.
Use the one from the mega root thread https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994.
I also know the xposed torch works. Like to recommend xEmui module.

[ROM][A2017G/U][V3.0.0B01_2 - 8.0.0][stock] SL!M

DO READ ALL CAREFULLY ! I MEAN ..... ALL…
When installing this zip you have to know it’ll make your intSD to be formatted when you want to revert to Nougat (see later on) . So do follow instructions carefully, otherwise do flash something else….don’t want to see some tears due to this one
So, thought I upload my twrp zip of A2017 V3.0.0B01 MiFavor 5.2 based on @wineds backup (thnx mate !). And make a FULL GUIDE for it !
As some of you wanted to test out this V3.0.0B01(version2) not through EDL but via a regular twrp zip, here you go !
Pros and Cons but did my best to make it as it is...
PRO :
*stock rom with Dolby
*almost fully debloated of Chinese adware
*working magisk 15.3 and safetynet
*working adaway
*magisk modules working fine
*no call bugs
*no hickups or stuttering UI
*scaling up to 0.25 – much faster UI experience
*axon7 G bootanimation
*FP scanner less then 1/2sec response time
*…
CONS :
*didn’t manage to make system r/w through root explorers ; you can however delete and add files - or use twrp - i guess you’ll have to live with that and test for yourselves
*reboot time lasts langer then normal
*quick-charging does work but does not display that on screen
*dialer phone call list may show some chinese characters next to "mobile", "work". It's a translation of it.
*…
Procedure : READ CAREFULLY !!!!!
0. Download/place files onto extSD (not intSD) formatted as Fat(32)/exFAT (otherwise your extSD might seem “corrupt” when booted – see also PNW) :
a. Twrp3.2.1.5
b. A2017X_V3.0.0B01_O_SL!M rom
c. A2017X_V3.0.0B01_bootstack twrp3.2.1.6 incl
d. Modem G or U
e. A2017X_universalB15_twrp3.2.1.0 included and/or your bootstack of your running rom at the moment
f. Magisk 15.3
1. Do make a full backup of your intSD ! ( on pc or extSD like you want ). You’ll loose your intSD when reverting back and needs formatting to EXT4. YOU ARE WARNED!
2. Install twrp3.2.1.0 (if not already running) !
3. Do make a full backup in twrp3.2.1.0 of your entire working rom (boot, modem, system, data)(if not already done)
4. Boot into twrp3.2.1.0 and flash twrp3.2.1.5(a), reboot in recovery AGAIN ( do not boot system)
5. Wipe system/data/cache/dalvik
6. Install (b) rom
7. Install (c) bootstack
8. Install (d) modem (G/U)
9. Flash magisk 15.3 (f)
10. Wipe cache/dalvik
11. Reboot
12. Tap power on “5sec” and “30sec” screen ( I know….the corrupt boot is awfull,,don't blame me...)
13. You’ll be powered off/red lights
14. Power for around 10sec and you’ll boot
15. Tap middle circle on bootpage, choose English, setup wifi,check in,…..
16. You’re on !
17. Uncheck auto update into Playstore !
18. Check safetynet magisk. Should be ok
19. Check adaway. Should be ok. If not : check “systemless hostst” under magisk/settings
20. Enjoy adless youtube
21. ….
You can add the new JoJoc module in magisk to juice up your battery-life :good:
Tip : disable left page (Mi-board) with long press on home screen/goto more/uncheck Mi-Board
REVERT PROCEDURE to Nougat : READ CAREFULLY !!!
1. Boot into twrp3.2.1.6
2. Flash twrp3.2.1.0 and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format intSD again. But first look also if you see your old twrp backup you took earlier into the restore option
4. When so, go into wipe/advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik
6. Restore your old twrp backup
7. Flash universal B15 ! (for nougat)
8. Reboot
9. Red lights...but power again for some secs
10. You’ll boot
11. When booted, reenter twrp again and flash ( if needed ) your own bootstack again ( in my case on G I flashed the B09 bootstack (slim4) and in same flash also the B09-removeBLwarning )
12. Reboot and you’re on your old running rom now
INFO :
Stripped off :
Weather
Browser (ume)
Email
Google Video, Films…
Maps
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
….......
Baked into :
AdAway
Google Calender
Google Clock
Youtube Black themed addfree (latest)
...
Minor Modifications :
Zip aligned apk’s
Build.prop tweaks :
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Didgeridoohan
@asderdd (edl rom + modems :good
@wineds (for his TWRP backup :good
@NFound (for his new twrp's :good
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V3.0.0B01 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=889964283620773067 thnx @asderdd
Kernel : stock
Version Information :
Status : Stable
Created : 2018-02-18
Uploaded : 2018-02-20

1. Add A2017X-LockNow feature : https://androidfilehost.com/?fid=818070582850494172

Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?

FunkyRasta said:
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
Click to expand...
Click to collapse
Thank You !
I could but in this release i didn't add to much. Can add a flashable zip though later on. We'll see :cyclops:

Thanks for your efforts.
Did you try open account on chrome?

WesTD said:
Thanks for your efforts.
Did you try open account on chrome?
Click to expand...
Click to collapse
Have installed chrome (use another one) and logged into my google account.
Asking why ?

raystef66 said:
Have installed chrome (use another one) and logged into my google account.
Asking why ?
Click to expand...
Click to collapse
It was broken on MF5.x. I'll download and try soon your ROM.

Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?

BaamAlex said:
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
Click to expand...
Click to collapse
It's all in procedure you know. And no you'll have to install 3.2.1.5. Later on, when bootstack is flashed you'll end up even on 3.2.1.6 to not corrupt your data EXT4 partition.
Anyway, read carefully and do all as described!!! This is not a regular flash

Is this the official oreo rom by zte? How is the performance compared to nougat?

ahalak said:
Is this the official oreo rom by zte? How is the performance compared to nougat?
Click to expand...
Click to collapse
Based on this. ZTE release beta V3.0.0B01 MiFavor 5..2
Performance is up to you to test. For me it has no lags only the ones mentioned in OP. When listening f.e. on youtube, imo sound quality is way above N.
Battery with Jojoc tweak is comparable to N.
Also less then 1/2sec for FP scanner. So no bug there as before.
Test it yourself and compare :good:

Why this version and not B07?

Did not boot on my U version. Waiting on animation for 15 minutes

Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!

WesTD said:
Did not boot on my U version. Waiting on animation for 15 minutes
Click to expand...
Click to collapse
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this

joaste said:
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
Click to expand...
Click to collapse
Thnx joaste!
FP for me is like said very fast even when doing it's nap
Yeah, V3B07 would be great (i worked on it before) but then again for now no dolby when rooted and vice versa afaik. Therefore i worked on this one.

For G version (not sure about U) , if you want to disable nav_bar, use my navbar df!nr

raystef66 said:
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
Click to expand...
Click to collapse
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.

WesTD said:
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
Click to expand...
Click to collapse
Did you see the A7 bootanimation ?
Did you try the patch that i wrote in previous post ?
Edit : anyone on U version installed succesfully ?

i'm stuck at the linux penguin on my G model, done everything as described in the op, no errors while flashing or anything, can't get past it

[TOOL] Magisk Module Manager for recovery v2.5 (Magisk 19)

Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk

Great work dev[emoji106], thanks

doesn't works for me (doesn't list modules)

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
To list modules the script needs to write on /cache or /data. It will choose by itself.
Please send some screenshot of issue.

Looks very promising, especially enjoy having a GUI for this.

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
I'm working to make script use no external files, so script will depends completely on your recovery binaries.
Hope to release it soon.

I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.

mikeos said:
I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.
Click to expand...
Click to collapse
I don't know if I got it correctly.
Well... commonly modules won't survive after Magisk removal.
If you can't access TWRP for flash Magisk uninstaller or disable the problematic module, you can try to flash or even boot the ROM's stock kernel through fastboot.
But if such module did others modifications into data, so you'll have to reflash whole ROM.

Are you planning on publishing this on magisk repo?

This has saved my bacon at least 4 times since installing it, many thanks Adriano

Saved me from bootloop module, works like a charm!

Adriano-A3 said:
Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk
Click to expand...
Click to collapse
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."

Thx bro, you saved my day

PixelHead0_0 said:
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."
Click to expand...
Click to collapse
Same here, on Samsung S10+ with August update, latest Magisk and Twrp.

very useful for android 10, thank you sir !

I can't understand how to run it on the terminal

will it work with Magisk 20.0??

Sivabalan said:
will it work with Magisk 20.0??
Click to expand...
Click to collapse
have you tried it? does it work on magisk 20.1

Confirmed working with Magisk 20.1, thanks a ton for this!

working on 20.2 + android 10

[TWRP] 3.3.1 Aroma/Busybox compatible (ultra-low brightness)

Aroma compatible twrp (recovery.img) : https://androidfilehost.com/?fid=6006931924117889478
(tested on latest April Xperia Pie : 47.2.A.10.45)
BASIC guidance :
Be sure to read NewFlasher thread carefully first (Widevine L3 instead of L1 for locked bootloader).
0) recovery download
1) fastboot mode blueLight :$ fastboot flash recovery 270recovery9omni8-1FBEkeymaster3-twrp3_3_1.img
2) reboot STRAIGHT to twrp and always backup /boot only before Magisk-ified (needed with /system only in case of complete re-initialization or format, and for Treble roms)
3) flash magisk (min 17.3)
4) boot Pie (SafetyNet and Playstore certified should be ok with latest Magisk app after few mn)
Note: don't force remove bloatware: just disable them, so they won't reappear after future ota.
Once done, with your original /boot backup ( plus complete/full Magiskified backup), you can switch, without format /data, to my (xz1 enhanced) aosp Treble /system image: https://forum.xda-developers.com/pr...arm64aosp-9-0-0r21-microg-ufofficial-t3878115 , and restore back SonyXperia later with your full backup.
Future upgrade(ota):
-XperiFirm new firmware download + move away fotaKernel..sin & userdata..sin & simlock.ta + newflasher(with greenLight!)
-reboot STRAIGHT to recovery (and backup /boot only, before Magisk-ified)
-flash latest Magisk (min 17.3)
-boot Pie (SafetyNet and Playstore certified should be ok with latest Magisk app after few mn)
Optionally:
(-install Magisk Screen recorder or Snapdragon gallery, or aospEmail-SnapExchange free of analytics... )
-For better battery use KernelAdiutor with [conservative]highCpu & [ondemand]lowCpu (Adaway...)
Note: with or without su/hack, NightLight dim brightness is actually broken (wip)
Supplement:
This edition includes latest Aroma File Manager and TA partition backup: saves copies in sdcard/TWRP/ of TA, modemst1&2, boot.img plus some /vendor files like the identification build.prop ( default.prop fstab.qcom gps.conf uevent.rc). Every backup proceeds a copy of previous sdcard/TWRP/ TA.bin modemst1&2.bin and Id. build.prop in sdcard/TWRP/BACKUPS/.
Recovery simplified source : https://gitlab.com/oF2pks/twrppoplardevice/tree/aromaBusybox_Omni-8_1 (47.1.A.12.270)
with : TW_TARGET_USES_QCOM_BSP := false & Busybox v1.22.1
kernel : https://github.com/cryptomilk/android_kernel_sony_msm8998
prim-origin : https://github.com/cryptomilk/android_device_sony_yoshino/blob/lineage-15.1/twrp.mk

Thank you, working fine. How i change ui color? Flash the attached zips?

snake218 said:
Thank you, working fine. How i change ui color? Flash the attached zips?
Click to expand...
Click to collapse
No, just re-create (sdcard)/TWRP/theme/ui.zip exactly, and then launch Advanced§ReloadTheme from twrp recovery . Since I didn't include languages/*xml in them, you can only select Settings§Language without my uploaded themes (ui.zip) first. (Advanced§AromaFM & backupTA lines are also missing in regular uiBlueClassic.zip xml).
They are many twrp themes on xda, just be sure to use 3.3.0 ui.zip compatible edition.

Thanks for the new TWRP with Encryption. Device SOV36

Thank you for this fine version of twrp.
I am getting this error when making a full backup (ticked all partitions)
"error backing up system image, cleaning up folder"
I am running stock 47.2.A. 10.45 and j4nn kernel. Ric is off (i can write in system) and twrp are flashed.
i press "cancel" when asking for a password.
Normally the twrp just backup everything without any issues, so i must do something wrong??
Kind regards torben5247

Some themes for this ?

kojak1989 said:
Some themes for this ?
Click to expand...
Click to collapse
You can also use these themes for the 3.3.xx twrp
https://forums.oneplus.com/threads/custom-themes-for-twrp.849931/
Or if you search with Google, you can use all the 3.2.3 theme

theflanker said:
You can also use these themes for the 3.3.xx twrp
https://forums.oneplus.com/threads/custom-themes-for-twrp.849931/
Or if you search with Google, you can use all the 3.2.3 theme
Click to expand...
Click to collapse
but I do not know who will be good so that's why I'm asking

kojak1989 said:
but I do not know who will be good so that's why I'm asking
Click to expand...
Click to collapse
Why do you think it's a risk? If it doesn't work, it doesn't fit the theme and I use it!

@oF2pks
Hi, your newest version have original theme from TWRP or that from your previous version ?

Why can't I install any other ROM with this recovery?
Getting some invalid zip error.