Related
I Dropped my 5 and it hit the pavement right on the corner of the phone. Half the screen is shattered. I am ashamed.
Moto G has been ordered to replace.
Goodnight sweet prince. I hardly knew yee.
EDIT: 7/30 started the Nexus 5 teardown. Looking to buy a new screen and housing combo. This will be interesting. It will either work just like it used to or I will have a broken phone. Either way I'm in the same boat.
Ouuchhh! That's sad.
Instead of buying a new device, why didn't you replace the screen?
Bummer...did you have a case? Best of luck!
Just like losing a loved one. Hang in there. The extreme sadness will come and go in waves, but you will be okay.
just buy a new screen for 120 and replace it yourself
very easy
same thing happened to me
http://www.amazon.com/gp/product/B00HKL3DEM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I may still do this, but for now it's going in a drawer. I need to take some time to pry into it and make sure the frame isn't cracked. Maybe buff up the corner that's beat to heck afterwards.
I had a case but it was a slim case that really didn't protect the device beyond minor wear.
Well now you know. Take good care of Moto G. Otherwise it maybe another downgrade *wink* *wink*, jk good luck.
bukithd said:
I may still do this, but for now it's going in a drawer. I need to take some time to pry into it and make sure the frame isn't cracked. Maybe buff up the corner that's beat to heck afterwards.
I had a case but it was a slim case that really didn't protect the device beyond minor wear.
Click to expand...
Click to collapse
Well, as touchscreen, lcd, etc are fused together, the new screen you'll buy will have a new frame. Basically, you will just put your old motherboard, battery, antenna and backplate (and probably some others minor thing that I have forget ;D) and you're done.
Take a look on this screen http://www.amazon.com/gp/product/B00HKL3DEM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 : it's pretty easy to confirm that the frame is fused with the screen
galaxys said:
Bummer...did you have a case? Best of luck!
Click to expand...
Click to collapse
I guess a case wouldn't help in such situations
Blackbox421 said:
I guess a case wouldn't help in such situations
Click to expand...
Click to collapse
I had a "case" on it... http://www.amazon.com/NON-SLIP-Japa...8&qid=1406243987&sr=8-2&keywords=nexus+5+case
I'm sorry to hear that. I cringed inside when I read that post. Makes me wanna go and find a bulletproof case for mine. Best of luck with your Moto G.
Sent from my Nexus 5(hammerhead) using XDA Premium!
I've got a few moto x's in my house. It's nowhere near a replacement. Moto G I can imagine would be even further away. That sucks man
Things would have been different if you were on "Spigen Slim Armor", right ??
Sorry to hear bro..
Dropped mine this morning and the back cover popped off and the back corner is scuffed up.
Put my case back on immediately. Had been going caseless for over 2 months but its nor worth replacing the device.
Good luck.
Sent from my Nexus 5 using Tapatalk
Cases are great, but why not buy an extended warranty? If u live in Canada The Source will sell you 2 year protection regardless of where u bought your phone. It is like $120 and covers water damage too. ( if your phone is way busted they won't even know that u rooted it. XD)
==Spectrys' Nexus 5==
i dropped mine on hard floor mozaic or ceramic made floor (in bathroom) and when it hit all my family outside , heard the sound !!! smash was so hard . and u know what ? it survive and body injure is hard to find ) .
i saw nexus 5 black hit the ground and what happened to it , black ones interestingly has softer body than white . but its not obvious .
white nexus 5 opposite of all opinion and even mine , has awesome tough body . mine beloved , after smash to the ground i picked it up and it just took a really tiny spot isnt it interesting ?
. interesting point is . incident spot is just under the screen side and body didn't even reached to screen so nothing happened how !!?? gap between smash spot and screen is unmeasurable but still it didint reached screen ! . im ordering a spigen to avoid such bad screen shattered .
anyway im so sry . was your nexus black version ?
Dude, can you take a photo of your Nexus 5 after the damage?
Freshly baked from my Nexus 5
Why don't you sell it? It sounds like every part other than the screen is still usable.
Very sad for you man...
My white Nexus was on top of my car didn't look twice and stepped on the gas pretty hard ... it flew unperfectly and slid almost 20 feet saw it in the rearview mirror DAMN! picked it up it was perfect!
My red one tumbled down a complete set of cement stairs last month: again picked it up it was PERFECT! (not the case with the screen protector did its job and took the hit)
SO WHATS THE TRICK? You may ask...
After months of scientifical studies and not so proven research, some expensive case and skins and a couples cosmetical and functional repairs on my N5's here are the results:
More for less...
Cheap soft TPU case and very important tempered hard glass screen protector!
Found easy breezy on eBay or if your kinda cheap and ain't afraid of Aliexpress like me:
Glass screen protector:
http://www.aliexpress.com/item/Temp...r-LG-Nexus-5-E980-D820-D821-0/1618742279.html
Cheap TPU skin:
http://www.aliexpress.com/item/For-...l-Soft-Back-Cover-Case-For-LG/1563677998.html
R.I.P All the lost and dead devices , except for the apples they can rot, sorry for your N5 ... even more sorry that you had to downgrade! But Moto G seems like the better option at this pricepoint best of luck with that!
Has anyone used a tempered glass screen protector for this phone, I know it doesn't cover the whole screen, just wanted to know what people think about it. I've already ordered 3 pieces from different suppliers to see the differences, and whether it goes well on the phone.
id be interested to know if you get a good 1 cause ive bought the mobilefun version and it failed bad i got a full refund within 10mins of applying it. so cross that off your list lol
a3ads said:
id be interested to know if you get a good 1 cause ive bought the mobilefun version and it failed bad i got a full refund within 10mins of applying it. so cross that off your list lol
Click to expand...
Click to collapse
I have a few coming in during the next few day, I will try them out and give you some feedback, it's hard to use PET after many years of using a glass protector, so I have to try it out.
do you still have the protector, can you post a photo of it.
thanks
thanks, a good idea will be to provide some info on were u got em and i will have a look into getting some different ones and trying them out. right now ive bought "3x Vikuiti™ MySafeDisplay Screen Protector DQCT130 from 3M for Nokia Lumia 930" from "protectionfilms24" these work well enough but would love to have glass as ive got it on my other devices! thnx
a3ads said:
thanks, a good idea will be to provide some info on were u got em and i will have a look into getting some different ones and trying them out. right now ive bought "3x Vikuiti™ MySafeDisplay Screen Protector DQCT130 from 3M for Nokia Lumia 930" from "protectionfilms24" these work well enough but would love to have glass as ive got it on my other devices! thnx
Click to expand...
Click to collapse
I get them all from china, from some of the suppliers.
once i'll posted the results, and if it's positive, i'll see if I can ask the supplier or shop to put some online.
Update
Apprently I received the 3 glass protectors today, and i'm completely disappointed with them, it seems like glass protectors are out, i'm using my old pet A.R.M station one now which seems to fit the best so far, apart from the sides about 3 mm, the whole of the surface is covered, may be i'll try something like invisible shield next.
There isn't point in posting photo's, it's a waste of time.:fingers-crossed:
kms108 said:
Update
Apprently I received the 3 glass protectors today, and i'm completely disappointed with them, it seems like glass protectors are out, i'm using my old pet A.R.M station one now which seems to fit the best so far, apart from the sides about 3 mm, the whole of the surface is covered, may be i'll try something like invisible shield next.
There isn't point in posting photo's, it's a waste of time.:fingers-crossed:
Click to expand...
Click to collapse
Thanks for the experience anyways.
I'd also say get one with wet apply, if you live in europe Invisishields are by far the best I think, at least in Germany others like Skinomis are really expensive to ship. I got myself an Invisishield, and it's really good so far. It covers up the whole area, except for an extremely tiny part which is good since it doesn't get loose on the edges. The only thing I don't really like about it is the feel, it's a bit rubbery, but I guess that's due to the type and in normal use it doesn't really bother me.
th0mas96 said:
Thanks for the experience anyways.
I'd also say get one with wet apply, if you live in europe Invisishields are by far the best I think, at least in Germany others like Skinomis are really expensive to ship. I got myself an Invisishield, and it's really good so far. It covers up the whole area, except for an extremely tiny part which is good since it doesn't get loose on the edges. The only thing I don't really like about it is the feel, it's a bit rubbery, but I guess that's due to the type and in normal use it doesn't really bother me.
Click to expand...
Click to collapse
I've actually used invisibleshield before, the rubbery surface will wear out, and it will discolour overtime, but it's our only option for better protection.
Off topic Q: have you used the official flip case CP-637, i'm interested in the green one to compliment my green phone, but thinking the green will get very dirty quickly, so do you think the black is a better option.
checking out a few screen protectors from ebay
invisble phone guard
front and back and sides USD 19
extreme guard
front and back USD 10
screenknight
front and back USD 14.50
not available from invisible shield.
they are all very cheap, do you know if they are all the same.
update:
I got the xtreme guard from their site, it was more expensive at USD 10.99, then shipping on top which was about USD 6, from ebay it's USD 10 with shipping, but found on the internet a 85% off discount, so I purchased 2 sets which adds upto USD 9.17.
good saving
I dropped my phone today and the screen cracked. It's still usable, just has two ugly cracks along the front. Anyone know of a easy way to replace the screen?
treezy26 said:
I dropped my phone today and the screen cracked. It's still usable, just has two ugly cracks along the front. Anyone know of a easy way to replace the screen?
Click to expand...
Click to collapse
send it back to motorola i think they charge 150 to fix
nelsonator1982 said:
send it back to motorola i think they charge 150 to fix
Click to expand...
Click to collapse
Might as well have Motorola replace it, it costs $175 for a new device, but you have to mail them you're busted one first.
Sent from my Nexus 6 using Tapatalk
nelsonator1982 said:
send it back to motorola i think they charge 150 to fix
Click to expand...
Click to collapse
Agreed. I had a similar issue and had an overall good experience with Motorola repair. Took about ten days from start to finish.
Do I just go to there website? I don't have insurance.
treezy26 said:
Do I just go to there website? I don't have insurance.
Click to expand...
Click to collapse
Pretty much. Start at their online repair site:
https://motorola-global-portal.cust...ZS8xNDUxMjUxNzM4L3NpZC9zSnk3cDJGbQ==#/service
So I contacted Motorola and they will fix it for $175 and if I want it back fast I would have to pay another $40 in s/h. With that amount of money, I could just buy a brand new one for another $50. Any thoughts?
treezy26 said:
So I contacted Motorola and they will fix it for $175 and if I want it back fast I would have to pay another $40 in s/h. With that amount of money, I could just buy a brand new one for another $50. Any thoughts?
Click to expand...
Click to collapse
Yes it's 250 on Amazon. Probably a better choice.
Also do yourself a favor and buy a case
OK but now I'm in a dilly of a pickle... I have the option to buy the 6p. My concerns are that the 6 isn't gonna receive anymore love now that it's going on two years old. Would it be wise to purchase the 6 again? Or should I just upgrade to the 6p? I love the 6, I do. But...and yes there's always a but lol. But the 6p intrigues me. I've researched and I know its not much of an upgrade but I love the thought of the fingerprint scanner and the overall look of it. But it is slightly smaller in size and I'm a big dude...but (there it goes again), I could always get a case to make up the difference... Anyways, I would love you guys feedback on my first world dilemma lol. Thanks!
get the 6 and save the money for the next nexus 6 upgrade before the end of next year with a proper cpu like the 820
Sent from my GT-N7000 using Tapatalk
Just an update if anyone cares lol. I went ahead upgraded to the 6p. Farewell my fellow shamu-ers. If anyone is interested in purchasing my 6, pm me. Good day.
If you still have the phone and aren't afraid of breaking it you could try a glass only replacement. I have never done it before until yesterday. I ordered the wire from eBay and made a simple jig to hold the wire so I had both hands. I successfully removed the glass. Hooked it back up still works. Am waiting for the new glass and loca glue (didn't order it until I removed old glass so wasn't waisting money if I broke it. I did practice on 2 junk phones first. Only one of the test screens worked before and it still worked after. YouTube videos is what I followed.
get the 6 and save the money for the next nexus 6 upgrade before the end of next year with a proper cpu like the 820
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
This. It's not worth the extra $400 for the 6P just for a bit more dev love.
affiatic said:
If you still have the phone and aren't afraid of breaking it you could try a glass only replacement. I have never done it before until yesterday. I ordered the wire from eBay and made a simple jig to hold the wire so I had both hands. I successfully removed the glass. Hooked it back up still works. Am waiting for the new glass and loca glue (didn't order it until I removed old glass so wasn't waisting money if I broke it. I did practice on 2 junk phones first. Only one of the test screens worked before and it still worked after. YouTube videos is what I followed.
Click to expand...
Click to collapse
Would you care to share your links in what you did?
If better camera and finger print sensor and more comfortable phone in hand is whats important to you i would dive in. I buy 3 phones a year so i can understand you wanting to upgrade even if its not that big of an upgrade . But at this point there won't be any giant leaps from year to year .
treezy26 said:
Would you care to share your links in what you did?
Click to expand...
Click to collapse
Here is a link to glass and t3 torque screwdriver. http://pages.ebay.com/link/?nav=item.view&id=361337407585&alt=web
I got all the parts on ebay. Used the cheapest I could find from us sellers. You need a loca glu. I used a uv flashlight I got on eBay to cure the glue. Have to put it on all parts of glass for about 30 seconds each spot.
Here is the link to the wire I used
http://pages.ebay.com/link/?nav=item.view&id=111281188717&alt=web
I drilled 2 holes in a 2x10 block of wood about 8" apart and put the wire holding sticks in the holes. Watch YouTube videos to see how to take phone apart
It worked pretty good for me. I ended up with 2 small air bubbles under the glass and glass is slightly lifted on one side. Cannot notice once in cheap tpu case.
I used a locktite glue that takes 24hrs to cure to glue screen back to bezel. Cleaned with close pins while curing. Tried double sided tape didn't hold, krazy glue dried to hard didn't hold screen to bezel. I think all my trial and error and scraping and reglueing the bezel is why it is lifted.
Sorry took so long to reply. Just glued the screen on 2 days ago.
And I am in no way saying this is easy just that it was no where near as hard as I thought it would be. You could easily completely break screen trying this
Update. Screen works fine but... The locktite worked the best but is coming undone again. I believe I may have had the loca glu to thick. And made the screen thicker in doing so. And when I put it together it is pressing out. Am thinking of reseperating and reglueing. Any advice is welcomed
Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
OrenGazala said:
Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
Click to expand...
Click to collapse
Sorry to hear that, hope you have insurance.
Sent from my XT1095 using Tapatalk
AGISCI said:
Sorry to hear that, hope you have insurance.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
No I don't have insurance.
Bought this phone on eBay..
I have to pay about 150$ to repair the phone...
OrenGazala said:
Hey guys.
Yesterday my phone fell and the screen cracked.
Gorilla glass 3 doesn't seem to protect the phone...
Everything is working fine now but the screen is just cracked...
Click to expand...
Click to collapse
Consider yourself lucky man, with the s**t digitisers we had on the nexus 4 any crack in the glass above the screen would result in an unusable touch panel. I understand that cracked glass is never a good thing but at least you can still use the device!
I don't want to sound like a d**k but the purpose of Gorilla Glass 3 is scratch protection, not drop protection. Moto just released a shatterproof phone for that if I'm not wrong.
Hard glass on unprotected edges is always gonna break.
Flipz77 said:
Consider yourself lucky man, with the s**t digitisers we had on the nexus 4 any crack in the glass above the screen would result in an unusable touch panel. I understand that cracked glass is never a good thing but at least you can still use the device!
I don't want to sound like a d**k but the purpose of Gorilla Glass 3 is scratch protection, not drop protection. Moto just released a shatterproof phone for that if I'm not wrong.
Hard glass on unprotected edges is always gonna break.
Click to expand...
Click to collapse
Yea...
Well I can still use the device but I will replace all the front side:
Right now I have white front but the lab I send the phone has only black.
He will also replace the screen digitizers in case they got damaged.
I ordered a flip case from eBay, hoping that could save the screen (It sure could minimize the damage).
OrenGazala said:
Yea...
Well I can still use the device but I will replace all the front side:
Right now I have white front but the lab I send the phone has only black.
He will also replace the screen digitizers in case they got damaged.
I ordered a flip case from eBay, hoping that could save the screen (It sure could minimize the damage).
Click to expand...
Click to collapse
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Flipz77 said:
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Click to expand...
Click to collapse
Yeah lol.
Thanks man!
I'll update you when phne get fixed.
Flipz77 said:
+1 on the flip case. Just make sure it's got a tpu shell around the phone, otherwise you won't want a drop while the case is open!
(Don't be disappointed about the black front, it looks schweeeet with our amoled )
Click to expand...
Click to collapse
Well phone got fixed.
I don't like the black at all but that's what I have right now so I need to get used to it.
I hope I will be able to get along with the phone for one more year and then probably I'll replace it.
Right now he works really good.
It took the engineer to replace the broken screen with a new one about one hour and he always mumbled bad things about Motorola and how they build their phones.
He tried to put the back bamboo case to it's place and failed many times because the glue just won't work..
He told me to wait some time so the glue would get sticky to the phone itself.
Next time, I will buy a phone that have wider support in my country, make sure I have a flip case from the very beginning and make sure that you can unplug the battery from the phone.
That phone is awesome but has a quite long list of disadvantages...
OrenGazala said:
Well phone got fixed.
I don't like the black at all but that's what I have right now so I need to get used to it.
I hope I will be able to get along with the phone for one more year and then probably I'll replace it.
Right now he works really good.
It took the engineer to replace the broken screen with a new one about one hour and he always mumbled bad things about Motorola and how they build their phones.
He tried to put the back bamboo case to it's place and failed many times because the glue just won't work..
He told me to wait some time so the glue would get sticky to the phone itself.
Next time, I will buy a phone that have wider support in my country, make sure I have a flip case from the very beginning and make sure that you can unplug the battery from the phone.
That phone is awesome but has a quite long list of disadvantages...
Click to expand...
Click to collapse
Awesome that you could already have it serviced!
I see your point though, and I understand that in this thriving "free" market we can only choose the best compromise for our needs. I wouldn't buy a LG just for the removable battery and the repair support, but I can totally see why it looks like a viable choice for you right now.
As much as I like this phone, glue never looks like a good solution for pieces that are gonna be serviced sooner or later... As for the screen assembly, well, I guess every manufacturer now makes the digitiser and glass into one single part.
That being said, enjoy your moto and keep it for a while
3rd Whitedome Glass Failure. All after perfect installs & NO ISSUES until 3 weeks
Okay I am getting a little annoyed now..
I bought the whitedome glass for me and my wifes Note 8. Perfect installation. Glue spread perfectly and covered the entire screen. Dried perfectly not 1 bubble or spec of dust. 3 weeks later I wake up one morning and one of my edges looks like it lost adhesion and its peeling up and you can see the bubble/smudged glue under the screen not sticking to the glass of the phone anymore.
$50 later I ordered a new one and installed it again the same way. Perfect spread. No bubbles no dust nothing.
2 days after I put my new one on, my wifes phone starts doing the same thing!!! Now I have to order another one for her?
What a scam $50 bucks for it just to keep peeling up on the edges after 3 weeks... randomly overnight too... Only thing I can think of is CHEAP glue causing the issue. Amazon is prone to sending FAKE and CHEAP replacement items even on their "verified" sellers. Colognes, lotions, jewelry etc..
I contacted the manufacturer and they did not reply... on Amazon I contacted the seller and he said "Ask Amazon"... great customer service. FRAUDS.
I'd be furious too and would find another solution if I paid $50 for each glass. I just had to replace my glass today because the upper right corner came "unglued" - luckily I got a couple when Whitestone was having a blowout/EOL sale for nothing.
mcdanielvzw said:
I'd be furious too and would find another solution if I paid $50 for each glass. I just had to replace my glass today because the upper right corner came "unglued" - luckily I got a couple when Whitestone was having a blowout/EOL sale for nothing.
Click to expand...
Click to collapse
How did yours come unglued? Me and my wife have no idea what could have happened. It was literally overnight one day.
I just *****ed to amazon on their chat and they sent me a new one for free and refunded me one of the charges. Thats great and all but this is now the 2nd one on my wifes phone and i am already on my 2nd so what if they keep coming "unglued"...
mine's been going strong for a month and a half now.. no bubbles and no signs of adhesive wearing/screen becoming unglued. Also using it alongside a Spigen case too. I'd go so far as to say that the sceen protector is in 95% perfect condition since the install. Barely a hairline scratch to be seen.
Like Huey above, I've been using mine since Oct ~15th with no issues. It sounds like it could be curing issue if it happened twice where it's losing adhesion. Try using the sun to cure instead of the included lamp.
It's happened to mine also. It started losing adhesion on the right side of the screen out of nowhere. There was nothing touching that side of the screen so I was able to rule out anything pressing against the screen.
hbk_seanmichael said:
How did yours come unglued? Me and my wife have no idea what could have happened. It was literally overnight one day.
I just *****ed to amazon on their chat and they sent me a new one for free and refunded me one of the charges. Thats great and all but this is now the 2nd one on my wifes phone and i am already on my 2nd so what if they keep coming "unglued"...
Click to expand...
Click to collapse
I'm sure mine happened from excessive pressure on the TGSP in the upper right corner. It's a tight fit in my front pocket of my jeans. Hopefully it doesn't happen again.
i got my whitestone 5 days ago, applied perfectly, everything is fine except that the glue on the right side of the edges are starting to show as white along the edges, a simple swipe of an alcohol pad took care of that
Mines been perfect on my Note8 and my wife's S8+ for over a month
wierdly mine has the same lift area as yours op. Although i want to say it was my fault cause i noticed it right after I went camping. So something must have happened while I was drunk roasting marshmallows
illitirit said:
wierdly mine has the same lift area as yours op. Although i want to say it was my fault cause i noticed it right after I went camping. So something must have happened while I was drunk roasting marshmallows
Click to expand...
Click to collapse
Whitestone should add a disclaimer, "Do not use while drunk roasting marshmallows"
I don't know if any of you have tried this. I had some bubbles come up on the top corner of my Whitestone Dome. Due to the case pushed a bit on it. It started late Saturday and continue to get larger. I was already contemplating replacing glass. I said let me give the heat gun a try. So I went ahead and heated that section up and then massaged it out. Now the bubbles are gone. I don't know if this is going to last. But as of right now I am bubble free. I did not cure it again but it might help after you massage bubbles out. I am at work and do not have my UV light with me.
As a lot of reviews mentioned, this glass can be broken easily.
Good for you guys that installation was perfect. Mine was a total waste. And i believe i received a scrap glue
My 2 cents worth... I installed Whitstone the first day on receiving my phone (sept 15) everything ok and was happy with the product, after doing my homework, brought a Caseology [Parallax Series] super fit and I was a happy-chappie Beginning of this week my phone fell.... no bs, a max 4cm, from the bathroom cabinet top into the first draw, it splinted heaps, I thought **** but ok better that than the phone right, now comes the shock looking for the replacement glass, guess what, they want another 40 euros, I've paid over 50 for the set, getting expensive! I contacted and wrote to Whitestone saying I only need a glass without anything else, could they give me a better price. They haven't bothered to answer me..... to which I'm using now AmFilm Dot Matrix 3D Curved Tempered Glass Screen which costs 12 euros and satisfied with. Cheers Collin.
Harleycollin said:
My 2 cents worth... I installed Whitstone the first day on receiving my phone (sept 15) everything ok and was happy with the product, after doing my homework, brought a Caseology [Parallax Series] super fit and I was a happy-chappie Beginning of this week my phone fell.... no bs, a max 4cm, from the bathroom cabinet top into the first draw, it splinted heaps, I thought **** but ok better that than the phone right, now comes the shock looking for the replacement glass, guess what, they want another 40 euros, I've paid over 50 for the set, getting expensive! I contacted and wrote to Whitestone saying I only need a glass without anything else, could they give me a better price. They haven't bothered to answer me..... to which I'm using now AmFilm Dot Matrix 3D Curved Tempered Glass Screen which costs 12 euros and satisfied with. Cheers Collin.
Click to expand...
Click to collapse
Similar experience in terms of customer services, there's a problem with the glass I got. I contacted them via Amazon and they said they would send me another kit. However, it has been 20 days since and I got nothing. I message them again a week ago and no response.
MaelstromXC said:
Similar experience in terms of customer services, there's a problem with the glass I got. I contacted them via Amazon and they said they would send me another kit. However, it has been 20 days since and I got nothing. I message them again a week ago and no response.
Click to expand...
Click to collapse
They said they would send a replacement but I have yet to receive anything and they never responded to the following messages, just the initial one.
Glad I read all the feedback regarding this screen protector on here, I was looking at purchasing one but they definately won't be getting my money now!
They sound like a very shady company.
I think the glue has an issue with dealing with pressure after being cured. Now, I have beginnings of lines on the left side of my phone with the 2nd install. It's either a case of pressure/glue, or a case of manufacturing inconsistencies with the "flatness/curves". Surface reflections on this 2nd TGSP are different at the curved edges compared to the first TGSP I had on.
i am having a similar problem.
on the left side of the glass, i am seeing the glue starting to lift. very little, but its a fine line starting to show.
i have UAG monarch case, it line up good, no corner pushing it and i try to push in the corners just check.
so i believe the glue is not sustainable for long-term in and out of your pocket and hot/cold temperatures, and also pressure on it all the time. but at least is much better to clean and take off.
i guest that's how whitestone is making their cash.
because other loca glues are just not that safe to try.
oh well.
No competitor out there with them. so they are still charging us 50. and only 1 glass. goddamn.