Related
Warning!!!!!!!! You really can crack your glass by following the directions below, Please, read no further and leave now. If you, crack your screen, set your house on fire, or sever an artery (broken glass) then bleed out and die......well, you were warned!!!!!!!!!!!!!!
Okay, if your still here, read on and good luck.
Samsung Galaxy S Screens are smooth and silky! Even the name, gorilla - tough and glass- vulnerable, says sex;
Well, how can we get a sexy Fay Wray G.Tab screen surface from a humble sandpapered plain Jane surfaced NC screen?
The secret is............RAINX.....That's right, the same stuff you want on your windshield in a downpour, will with proper application, impart that silky smoothness you secretly crave.
APPLICATION:
1. Use "The original" rainX. (Caution: it is flammable)
2. Clean glass surface really, really...no really good. (Remove oils, alcohol works)
3. Use clean paper towels, fold into squares (4 or 5 )
4. Dampen towel applicator and scrub surface (Don't Crack Your Screen! Work into micropores of glass surface)
5. Dry to haze (for humidity over 10% use a blow dryer...low heat!)
6. Polish methodically...lots of clean dry paper towels (Don't Crack Your Screen!)
7. REPEAT (It took me 3 times)
Warning!!!!!! Do not, I repeat, Do not allow your girl/boy/wife/husband to touch the new silky surface; not if you ever want either of them back, that is.
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Bimboy said:
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Click to expand...
Click to collapse
Why are u using windex or alcohol? Just use a micro fiber cloth. No chemicals.
Uh, yeah, I wouldn't advise using Windex or alcohol on any screen. If a simple microfiber cloth won't clean it, add a drop of water for the tough stuff.
or just use tv cleaners
RainX application maintenance
WFINGER
Bimboy said:
Thanks for posting. Just a couple questions...
First, does this prevent finger oils from messing up the screen?
Next, wouldn't windex/alcohol remove the rainx then next time you cleaned your screen? It does on windshields... If so (and if it doesn't prevent finger grease marks), then I think you'd have to do this process over and over, each time you cleaned your screen.
Click to expand...
Click to collapse
Finland_2_Cupertino said:
Why are u using windex or alcohol? Just use a micro fiber cloth. No chemicals.
Click to expand...
Click to collapse
Bimboy, yes it does help with the finger oils. I think it works by preventing the oils from settling into the glass micropores. You still get smugdes and fingerprints but they wipe off much, much easier.
As Finland 2 suggested, once applied, a microfiber cloth is all that is needed to maintain the new finish. I expect it to last quite a while, since on a windsheild even with wipers and rain, an application usually. Lasts up to a month.
A little spritz of Stoner Invisible Glass (for autos) on a microfiber cloth does a good job getting the NC glass as smooth as a Tab too. Fights fingerprints for a bit, and doesn't take any effort. A can should last you a lifetime.
Pledge furniture polish spray will also help (it's pretty popular for cleaning helmet visors and motorcycle windscreens) and will also keep the prints down on the plastic bezel area (and back). Once again, apply it to a cloth first, don't spray it directly on the NC.
O your can just get a nice Screen protector like the AntiGlare one B&N Sell..........
Makes my screen silky smooth and protects it from scratches.... Why would I want to waste time using rainx and a process that could hurt the screen?
Also Rubbing alcohol with Microfiber Cloth Works Great to clean the screen, gets ride of all the oil and grim. Do not use anything but a Microfiber Cloth(As it could scratch the screen), Also Pure alcohol wont hurt the screen, its Ammonium based products and harsher Chemicals like that you need to watch out for. Alcohol is a prove safe method for cleaning Plastics even Internal Computer parts wont be hurt by Rubbing Alcohol.
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
gedster314 said:
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
Click to expand...
Click to collapse
I'm kinda in your camp, I've never found a screen protector that I wanted to use. They may be out there, but the trade offs, for me at least, seem to out weight the advantages in day to day use. Since I use a cover for my NC, I don't have to worry about objects in my pocket, keys and such, gouging my screen.
I know the RainX thing isn't for every one, and there may be easier ways to achieve the smooth surface effect, but I have found it to have worked very well. Before treating the screen, it would take a lot more microfiber polishing to remove finger oils or smudges, but now they come off very easily.
I've been using 'Gel Gloss No-Streek' for years on all kinds of glass stuff. It really is the best that I've found and it is pretty cheap. I used it on my nC and it is 'silky smooth' and resists fingerprints extremely well. One word of note though is that the polish does contain 'petroleum distillates and ammonia' so you have to be careful handling it and it stinks. Also, like most good quality polish you want to apply it to a cloth first, then to the nC, don't apply directly to the nC.
Here is a link to the stuff I bought.
http://www.amazon.com/Industries-NS-8-8OZ-Glass-Polish/dp/B000IO8GWC
Matte Anti-glare screen filter is the way to go
gedster314 said:
I use to by screen protectors for all phones back when they had the plastic resistive screens. So far I have yet to scratch any of my glass capacitive ones. I did buy a used ipad from someone that managed to scratch the glass, it can barely be seen but it is there. So I'm on the fence about a screen protector for the nook. I probably won't get one for the nook but if i buy a $500+ tablet you can bet I will put one on.
I don't like the drag created when using a Zagg (invisible sheild) soft films but I don't mind the harder plastic ones that you occasionally have to replace.
Click to expand...
Click to collapse
I feel ya. I think you would be presently surprised with the Nook AntiGlare Matte filter available at Barnes and Noble. It's $15 and really does make the screen feel smooth, while at the same time resisting finger prints and smudges really well. A night and day improvement over the oddly tacky feel of the nook color screen. They give you two of them. Oh, and it's the "hard" type of plastic, not the flimsy cheap stuff.
RainX is not going to keep your screen from getting scratched. It also will probably increase and not reduce glare.
Gel gloss, isnt that for fiber glass?
Sent from my SAMSUNG-SGH-I897 using XDA App
Last year I got the JLG Nano is was pretty impressed with it. I had it for my Note 3. This year I have the M8 and JLG released a tempered glass version and I am just as happy with it as I was with the Nano. The Nano-t is made of glass material, feels great and is practically indestructible.
What I like about the M8 is that the screen is flat edged, rectangle. No camera or speaker holes to line up with. So the installation was really easy for this. JLG includes a alcohol prep pad which has proven to me to be the best way to clean a screen for screen protector installations.
Another cool thing I learned about this Nano-t is that normally screen protectors come with two tabs/films on both sides to remove. But this Nano-t only comes with one film to peel off from the sticky side to put on the screen itself. The other side, which is what you will touch does not need to have a film to protect it because it is scratch proof and anti smudge.
A deal breaker to me for screen protector is if it works with cases. I put a SEIDIO Surface case on it, which is a slide/glide hard case and the Nano-t worked just fine. No issues at all. So I was relieved to learn that fact.
For kicks and giggles I even put it through a key and knife scratch test along with a sharpie test. All passed with flying colors.
There really isn't anything negative other than that at times the screen is too smooth and my finger tip will slide on the screen. Other than that its a really nice tempered glass screen protector.
TIP: They are having everything 20% through July 4th weekend.
DBAcases Link for the Nano-t
PET, TPU, or Tempered Glass – all you need to know to choose a screen protector
A bit of a disappointment in the past, today's screen protectors are easier to install, cheaper, and better than ever in every aspect. There are three varieties - PET film, TPU (polyreuthane), and our undisputed favorite - tempered glass. And then there are two methods to get them on your display – dry and wet. So here's more about how screen protectors work and what they offer.
PET Film
Obviously, PET doesn't stand for a dog or a cat. It means "polyethylene terephthalate" - a type of plastic that's available in many variations depending on specific applications. In the manufacturing industry, it's used for mundane stuff like liquid and food containers. But this doesn't mean that PET film protectors are glorified water bottle plastic. They consist of polyester film with a scratch resistant matte coating on one side and a silicone adhesive on the other. Quality ones are quite clear and add a functional anti-scratch layer to your screen, but have no impact protection. And their scratch-resistance isn't better than what Gorilla Glass already has - it's limited to fingernails, coins and keys. They are cheap, and usually come in packs of three or more. Their downside is that plastic is the easiest to discolor from sun rays and oil buildup from your fingers, and it doesn't feel as nice as glass does to the touch.
If you have a cheaper or older phone, or you're fine with the most basic and affordable screen protection, get a PET protector. The manufacturer doesn't really matter, but if you have a soft spot for a particular brand, there's no reason not to go with theirs. Chances are that protectors from established brands will be better cut-out for your device and won't leave loose edges that can catch on to your clothes and peel the protector away (it has happened before).
TPU
TPU (thermoplastic polyreuthane) is next in the screen protector food chain. This is chemically-enhanced plastic whose properties include scratch resistance, elasticity, oil and grease resistance, and increased toughness. Since the material is elastic, it has limited "self-healing" abilities. This means that its slight softness gives it the power to absorb non-extreme impact, such as most drops and lighter scratches, while retaining all or most of its original composition. For example, lighter scratches usually leave just a small dent in the soft plastic, which slowly returns to normal.
The "military-grade" tag most TPU protectors proudly carry is worthy of an explanation. One manufacturer says that this material is used "to protect jetfighters". And what do you know, it's true! Skim through this Aerospace Surface Protection brochure - it's full of polyreuthane protective tapes used for "aircraft and windmill leading edge protection". However, getting a TPU case or screen protector doesn't guarantee it's made of the same quality of material. But your smartphone also isn't a fighter jet, right?
If you are willing to pay a slightly higher price, a TPU protector is, logically, better choice than PET film. At the very least, it's going to provide better impact protection (although you shouldn't be pushing your chances). It's also nicer to the touch, although it isn't glass-smooth. Arguably, the best part is that you'll get to explain to your friends and acquaintances how your phone has "fighter jet protection". Pretty cool, huh?
Tempered glass
Protection with a temper! Tempered glass (TG) screen protectors are the absolute best you can buy. Material-wise, a high-quality TG protector is multi-layered, usually starting with shock absorbent silicon on the bottom layer, followed by PET film, and an optically clear adhesive to 'sandwich' the previous two layers with the next two, which are tempered glass and oleophobic coating. All of this scratch, oil, and shock protecting goodness is compressed into a <0.4mm-thick sheet that's no harder to apply than a PET or TPU protector, and none heavier or otherwise obnoxious.
A glass protector is superior to its alternatives in every way. It has better light transmittance, making for a clearer display. It's anti-reflective and glare reducing. It has oleophobic coating, which heavily reduces fingerprints. It has the smooth feel of actual glass under your fingertips. Unlike Gorilla Glass 3, it resists sand scratches, making it the only viable option for beachgoers. And let's talk about shock protection. T-glass protectors boast a material hardness rating of 8H to 9H, meaning they are hard enough to resist scratches from anything that's not topaz or corundum (extremely hard aluminum oxide). Yet, they aren't completely shatter-proof. Since this is toughened glass we're talking about, in the event of a fatal drop, the protector will absorb all the damage and break into tiny shards. Chances are pretty good that your display will end up unscathed underneath. Thus, instead of having to replace the entire screen, you'll only have to get a new protector. Which is easier on both your soul and your wallet.
As you probably expected, tempered glass protectors are the most expensive kind. Most renowned brands can charge up to $40 for their products. And although that's money well spent if you are rocking an expensive flagship smartphone, excellent tempered glass protectors can be found for less than $15 online.
Dry vs Wet Mount
There are two methods for installing a screen protector - dry and wet. The method is usually specified on the box.
The dry method keeps the protector glued to the screen with static electricity. There's no adhesive involved, and the application is very straightforward. In short, you're supposed to enter a dust-free environment (either outside, or in your humid bathroom, preferably naked to prevent dust specs from your clothes), clean your phone thoroughly, align the protector and apply it. After a few tries, you will end up with near-perfect results. You don't have only one shot at this. Most dry-application protectors will let you carefully lift them off the phone and take care of misalignment and dust particles before trying again. Some even come with an electrostatic paper band to help you get rid of annoying dust.
The wet application method works by spraying liquid on the underside of the screen protector. It's a convoluted and awkward ordeal. You're tasked with the very precise placement of a thin, wet sheet of plastic - quite frustrating, because the liquid adds weight and gets the protector folding and dancing in every direction but the right one. Allegedly, wet protectors are easier to place without forming air bubbles or trapping dust, and are more resistant to peeling. If you mess up the installation at first, they too give second chances at applying them correctly. But all the phone drying, protector re-moistening and getting rid of excess liquid between it and screen is quite the patience test.
Wrap-up
With so many options available, and at very fair prices, getting a screen protector for your device has become a no-brainer. PET film products are the best choice for basic screen protection. TPU protectors can be a bit rare, but they have the best ratio of affordability and toughness. Finally, Tempered Glass protectors offer the ultimate in protection and feel, but they are the priciest of the bunch. Still, even the most expensive ones make sense for flagship smartphones and tablets.
GUIDE PERFECT SCREEN PROTECTOR INSTALLATION BUBBLE FREE
CLICK HERE
HAVING SCREEN PROTECTOR ? USEFUL OR NOT ?
How important a screen protector is for you?
Matte or clear type screen protectors - choose your poison!
If you are planning to get a screen protector, the first question that a seller will pop up to you is do you want a matte or clear type of screen protectors. There is absolutely no difference between them both in terms of quality but what makes them very distinctive is the looks or outcome after installation. Matte type is great for those who hate to wipe off the finger prints and those oily stains on your screen. For the record, if you are touching your screen, there is absolutely no way to avoid the smooches. If you are going for the matte type, you can well kiss good bye to those clear and high resolutions displays (Retina Display for iPhone and Super Amoled Plus for Samsung for example). However, the positive side of matter type is of course, anti finger print ability.
Gorilla Glass - is it worth taking the chances?
I know this is one of the most common questions for most. Can I actually count on Gorilla Glass to protect my smartphone from scratches. Gorilla Glass is made to protect the phone from normal damages but always keep in mind that Gorilla Glass will ensure the phone is scratch resistance and not scratch proof. Scratches could happen over time and again, it boils down to your self preference if you want to risk it. If you are a safe handler, then you could be fine with this option.
Touch sensitivity issue with screen protectors - myth vs real
Some users complained that when they fix screen protector on their phones, they felt there is sensitivity loss. Users around the world might experience this regardless the quality of the screen protector in this case. Although it is very rare for the occurrence, it could happen and trust me on this as I experienced it myself. If you are using a matte type screen protector, there is a higher chance of this compared to a clear type. Also, the chance of this increases if you uses a cheap screen protector.
Where to Buy
Amazon
Ebay
Local stores
Sources
PHONEARENA
APPLE FORUM
Reserved
What about nano liquid screen protector
hrishi420 said:
What about nano liquid screen protector
Click to expand...
Click to collapse
It's also called hard shield and it's basically a spray that solidifies afterwards in about ten minutes. I personally have not used it . It's basically used for reduced smudges and finger prints with some protection but it has mixed customer opinion about it. The most common being uneven and taccy surface which might be due to uneven spray.
More information
http://www.taiwantrade.com.tw/EP/cl...637342/Hard-Shield_nanotech_Screen_Protector/
http://www.dynaflousa.com/product_info.php?products_id=146&osCsid=42vehcu9tbnsqan9gh39egfs26
http://www.prs-international.com/destra-shield-advantages.php
Where to buy
http://www.amazon.com/Hard-shield-Coating-Screen-Protector-Ereader/dp/B006G2J0U2
How many tempered glass screen protectors are currently available. I know there is Xgear and.....?
TheNerd:] said:
How many tempered glass screen protectors are currently available. I know there is Xgear and.....?
Click to expand...
Click to collapse
This is a thorough list of all tempered glass with their price and specification. Note they are for Samsung S4 but I'm sure Nexus' ought to be available as well. Scroll down the forum and you'll find video reviews as well.
forum.xda-developers.com/showthread.php?t=2260486
SMALL REVIEW FROM A USER
I have a tempered glass screen protector for my Note 3 and it fits and works perfectly. It's been on my phone for 2 months now. Not a single scratch to it and no peeling or dust accumulation at all. I would recommend one any time over a plastic protector. I got mine from a company called fasttech. They are very cheap compared to UK sellers and the company is very reliable even considering that they are Chinese.
AN OPINION FROM A USER
Tempered glass has an adhesive throughout the whole surface, not only the bezel/perimeter area.
The difference is very simple. If you want scratch protection, get a film screen protector, but make sure to get quality PET 3H hardness film like the one sold by iSmooth and Spigen. Cheap ebay stuff is thin, will scratch, will bubble after some time, and will have rainbow effect under the florescent light. If you want ultimate shatter protection - get tempered glass. On impact the glass will shatter without affecting your display. Spigen and Seidio makes some of the best ones. I'm personally a big fan of Seidio VITREO and been using it on my Note 2 for a very long time.
AWESOME screen protector for $3 w/ prime shipping. Left coupon code in video description.
I'd like to point out that this does NOT have an Oleo-phobic coating on it.
skwon said:
I'd like to point out that this does NOT have an Oleo-phobic coating on it.
Click to expand...
Click to collapse
Which means what exactly?
Oil (i.e. fingerprint) smudge resistance.
I have a few Meguiar's car detailing products that would take care of that. I probably wouldn't have thought of applying it directly to the screen, but I would apply it to a glass screen protector because, well, it's a screen protector, so who cares?
here is a quick demonstration of Oleophobic vs non-Oleophobic. Of course you aren't going to be putting olive oil or oil like in the demonstration video but the oil from your fingers will be easier to wipe off the screen. I rather not have to apply wax to the screen protector every now and then. For me its easier to just buy a tempered screen protector that already has the coating on it and not have to reapply some kind of wax again and again.
https://www.youtube.com/watch?v=vC5Uu8JAkMY
I bought one of these too. Overall I am not unhappy so far but I will say in 3 of 4 corners I have small air bubbles that may or may not eventually go away. I did follow good procedure and handling and have never had air under any of the other 4 glass screen protectors I have applied to various devices. Their warranty may cover the bubbles but for $8 I will leave it on for a bit.
So as many of you have tried car wax I decided to give paint sealant a go.
As the one plus has a factory screen protector with questionable Oleophobic coating (if any) I was kind of surprised that it was very grippy and not at all slick.
So I decided I was going to use an automotive trick.
First I tried with rainX Ultra Wax (I had it lying around). The outcome was good a bit slipperier than before but fingerprint resistance wasn't all that great and smudges did appear.
So I decided I was not going to go the carnauba wax route and look into synthetic paint sealants mostly because by design they are non-abrasive and are designed to protect whatever is under them by repelling water and just overall forming a barrier.
So I went off and got a bottle of Autoglym Extra Polish Protection. (Or any automotive paint sealant product should work)
The results are much better than wax. After a 30 min cure I wiped off the excess and it seemed the same as wax so I semi gave up and went to bed. The next morning I noticed the screen protector surface felt a lot slicker. Turns out sealants are slow cure products and they will take a few hours to reach full hardness once they do they work adequately well. Mind you they only help finger prints show up less and make them easier to clean off but then again a true oleophobic coating in my experience does about the same just with better efficiency.
So if you're factory screen protector is a smudge magnet here's something to try if you're using car wax I think the cure time is under 30 min to reach full slickness and if you're using a synthetic sealant you should consult the manufacturer. Avoid cleaner wax as they contain polishing compounds which may harm the plastic screen protector.
Another option: https://www.amazon.com/dp/B00LKYW6M0/ref=cm_sw_r_cp_apa_RyNYzbNN58FBZ
Can find all kinds of diy oileophobic coatings online. Would love to hear your these compare to the coating recommended by the OP in terms of durability. Good thread!
NanoGo liquid screen protector for mobile devices
Phones & Tablets Monitors & Camera Lenses - Explore & Order!
Sorry, site only FINNISH language, use google translation.
https://bluebiit.com/
Let us know whether it holds up well!
I didn't go and buy the Fusso stuff because the label says it must be applied to glass. I'm trying to add a coating to the stock factory plastic screen protector.
As for durability only time will tell 48 hours later and finger prints are still very easy to remove but the real test would be how it's like after a month.
That said the purpose of Automotive paint sealant is not that much different from a oleophobic coating automotive paint sealant is designed to offer a sacrificial layer of protection against tar / UV / rain / bird droppings / dust so that the paint itself is never touched. Likewise most of these coatings are designed so that said contaminants are easier to remove once they do touch your car's panels. Ergo finger prints seem like they are an equivalent contaminant and would work the same way so far it's holding up and the screen protector is a lot slicker than without the coating. I tested it by using isoprophyl alcohol to remove the car wax an the factory plastic screen protector was much grippier.
You can wipe off the haze after 20min or so but most car waxes take a few hours to fully cure as the solvents dry out. Just be careful around edges some car waxes will leave a line of wax visible after it dries along the edges of a screen protector the sealant I'm currently using doesn't seem to do this so it's super easy to use.
So after a few months of use durability seems questionable the coating seems to wear off after about 2 weeks of use so overall it's not that effective.
Just updating this in case people were wondering how successful this was.