Database Develop

[ROM][AOSP][GingerBread]full_crespo-ota-eng.mmatt - 20111212

I like stable rom without any bugs. This is the perfect rom for my needs. This is an AOSP Gingerbread (2.3.7) rom and this is 97% stock.
When official ICS will be released, you can update it with OTA function on this rom.
Features:
-Stock kernel
-Stock apps
-No gapps
-Sources updated to 12/12/2012 from "gingerbread" branch
Click to expand...
Click to collapse
Only changes:
-Superuser.apk + su
-Framework and Apps Deodexed
-Nano added
-bash support
-busybox added
-zipaligned
-apn-list.xml updated
-Stock recovery removed
Click to expand...
Click to collapse
To-Do list:
-"crespo4g" support
Click to expand...
Click to collapse
DOWNLOAD: http://www.multiupload.com/NGHPAJIPFA {63,7 MB}
Disclaimer: The usual stuff, Flash at your own risk. I am not responsible if you brick your device etc.
PS: This rom will not flash stock recovery.
PPS: This is only for "crespo"
PPPS: "crespo4g" will be supported maybe tomorrow.
If you want, you can click on "thanks" button offer me a RedBull!

Can you build ICS

MattMack said:
When official ICS will be released, you can update it with OTA function on this rom.
Only changes:
-Stock recovery removed
Click to expand...
Click to collapse
Hi Matt, thanks for your time and work.
But, are you sure that the OTA will gonna work?

the OTA update, work from stock 236...
from 237 stock dont works OTA updates!!

You can use OTA in "about phone" menù. I think that it works.

Matt it would be great if you made a tutorial starting from which steps you took to build the AOSP ROM.
If you want start from this page:
http://source.android.com/source/downloading.html
I would like to add it to my VMWare image thread which I made for new people.
I had a 2.3.7 ROM built but had no working WiFi.

MattMack said:
You can use OTA in "about phone" menù. I think that it works.
Click to expand...
Click to collapse
I haven't tried it, but I think that you need the Stock Recovery for the OTA, or am I wrong?

I'm sure just cause it says "Check for update" in the about doesn't actually mean it will update i mean in most ICS roms here its says Update but nothing happens ... i might be wrong tho i guess we'll find out when official ICS comes out =P

brainmaster said:
I haven't tried it, but I think that you need the Stock Recovery for the OTA, or am I wrong?
Click to expand...
Click to collapse
I don't know. CWM Recovery support "Update packages". I think that it works, i think.
djjonastybe said:
Matt it would be great if you made a tutorial starting from which steps you took to build the AOSP ROM.
If you want start from this page:
http://source.android.com/source/downloading.html
I would like to add it to my VMWare image thread which I made for new people.
I had a 2.3.7 ROM built but had no working WiFi.
Click to expand...
Click to collapse
WiFi works on my ROM. Sorry but I never used VMWare. I use VirtualBox.

[ROM][AOSP][UNOFFICIAL] ColtOS Enigma 4.6 [ENCHILADA]

Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.

Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6

Do you will support your 10 Roms?

Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...

No need to flash the oos zip at the start inorder to boot?

showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?

is this rom using may security?

cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup

quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!

sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..

..

ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).

CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...

Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?

pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?

Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that

[ROM][A2017X][B04 8.0.0][stock] SL!M8

A2017X_O_B04_SL!M8​
Just for fun....no more no less...​
For our dedicated stock users​
For those who weren't able to install or obtain the A2017G-O-B04 OTA update, I made a SL!M8 rom (not an AROMA because atm I don't have much time ) that can boot on a working stock Oreo rom.
This version is tested on stock B02 as on my SL!M7 (based on B03). So there should be no problem at all
I hope you'll ENJOY !
Modifications :
* full system r/w
* removed some unwanted apps and the ability to remove more when booted into the rom with a root explorer
* safetynet pass cts will pass when flashing magisk 19.3
* youtube vanced
* adaway 4.2.6
* full working Dolby Atmos
* wifi working...and ofc all the rest
* fastboot working
*.....
Installation : NOTE : for those having trouble installing, flash the twrp 3.2.10 with the universal bootstack (don't forget the modem)
1. unlocked, twrp3218 (non-treble) installed (or compatible one for oreo...)
1.a boot into twrp, format data/factory reset, reboot twrp, wipe system
2. flash A2017GV1.3.0B04_BootStack ( flash your modem type again as this has the latest G-version one )
3. flash A2017X_O_B04_SL!M8
4. flash Magisk 19.3
5. wipe dalvik/cache and boot
6. setup phone
7. you should now have a fully working SL!M8 :cyclops:
Contributors :
@raystef66
Credits :
@totmakina :highfive:
 @asderdd
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V1.3.0B04
Kernel : ZTE stock
Security Patch : 2019-04-01
Version Information :
Status : Stable
Created : 2019-07-10
Uploaded : 2019-07-10

NEW A2017G-O-B04-MODEM

Good rom for those of us who like stock! I will add Xposed.
I love the stock. I'll test how the battery goes since I put it in a new one a little while ago
Thanks Rays!

totmakina said:
Good rom for those of us who like stock! I will add Xposed.
I love the stock. I'll test how the battery goes since I put it in a new one a little while ago
Thanks Rays!
Click to expand...
Click to collapse
I'm currently running the chinese B23 with TWRP, is it possible to flash this over? Or should I flash other rom first?
Also, a bit offtopic suggestion: You should update your camera2api enabler ZIP, because it somehow changes the build name to A2017GV1.3.0B02 on other roms (this happened to me on european B03 and chinese B23 and should also happen on this new B04)

joaocandeias said:
I'm currently running the chinese B23 with TWRP, is it possible to flash this over? Or should I flash other rom first?
Also, a bit offtopic suggestion: You should update your camera2api enabler ZIP, because it somehow changes the build name to A2017GV1.3.0B02 on other roms (this happened to me on european B03 and chinese B23 and should also happen on this new B04)
Click to expand...
Click to collapse
You can try since it is a stock Oreo rom. So follow instructions furtheron.
Ah yes, you're referring to this one : https://androidfilehost.com/?fid=11410932744536993784
Yeah, it's all in the build.prop...i'll make another one if you want

Thanks so much @raystef66 ! A lot of us have been waiting for this! Hopefully I have better luck flashing this, as B03 Sl!m was giving me encryption issues upon rebooting after flashing.

raystef66 said:
You can try since it is a stock Oreo rom. So follow instructions furtheron.
Ah yes, you're referring to this one : https://androidfilehost.com/?fid=11410932744536993784
Yeah, it's all in the build.prop...i'll make another one if you want
Click to expand...
Click to collapse
Yes, that's the one. I can live with it as long it doesn't affect the ROM usage (I don't think it does though) but it's up to you.
About the new SL!M8, I'll see if I can flash it tomorrow and give feedback
Thanks for your awesome work.

Q: i installed b03 and cant find double tap to wake anymore. Is the Feature gone since Oreo? I wonder if the bugs im having will be gone with this update (gboard constantly crashes when opening settings so i cant change/add languages, SMS bug / can send but not receive, Turn off screen is not installed even tho i choose it in aroma Installer)

Hi, raystef66. Thank you so much for your contribution! I stayed on "ancient" slim B10 (Nougat) until now for Daydream support. Now I upgraded and it works fantastic.

joaocandeias said:
Yes, that's the one. I can live with it as long it doesn't affect the ROM usage (I don't think it does though) but it's up to you.
About the new SL!M8, I'll see if I can flash it tomorrow and give feedback
Thanks for your awesome work.
Click to expand...
Click to collapse
Updating the HDR+ zip again - had to check it over - should work
Here you go : A2017G-V1.30B04_HDR+
boxemall said:
Q: i installed b03 and cant find double tap to wake anymore. Is the Feature gone since Oreo? I wonder if the bugs im having will be gone with this update (gboard constantly crashes when opening settings so i cant change/add languages, SMS bug / can send but not receive, Turn off screen is not installed even tho i choose it in aroma Installer)
Click to expand...
Click to collapse
DT2W is working fine. Up to you to test out the other things.
romitkin said:
Hi, raystef66. Thank you so much for your contribution! I stayed on "ancient" slim B10 (Nougat) until now for Daydream support. Now I upgraded and it works fantastic.
Click to expand...
Click to collapse
Good for you :good:

Nice News in the Morning
Thx for your Efforts Ray. I'm actually on your
B03 Sl!m7. can i download only the b04 sl!m package and flash it over in twrp, or is it better to follow your steps from the beginning ?
Greets from Berlin :good:

Tunox said:
Nice News in the Morning
Thx for your Efforts Ray. I'm actually on your
B03 Sl!m7. can i download only the b04 sl!m package and flash it over in twrp, or is it better to follow your steps from the beginning ?
Greets from Berlin :good:
Click to expand...
Click to collapse
You can flash it when on SLIM7 - I tested it myself.
So backup your stuff, factory reset, reboot twrp, wipe system, flash B04 bootstack, SL!M8 and magisk19.3
You can try a dirty flash but that's up to you to test. I always prefer clean

a2017u
Hello and Ty @raystef66 for this great work.
i have the A2017U version . which modem should i use?
ty
David

le011 said:
Hello and Ty @raystef66 for this great work.
i have the A2017U version . which modem should i use?
ty
David
Click to expand...
Click to collapse
You're welcome.
You can use this one : https://androidfilehost.com/?fid=1395089523397887283

raystef66 said:
You're welcome.
You can use this one : https://androidfilehost.com/?fid=1395089523397887283
Click to expand...
Click to collapse
Ty.....
great day....

raystef66 said:
You can flash it when on SLIM7 - I tested it myself.
So backup your stuff, factory reset, reboot twrp, wipe system, flash B04 bootstack, SL!M8 and magisk19.3
You can try a dirty flash but that's up to you to test. I always prefer clean
Click to expand...
Click to collapse
I also prefer a Clean flash, so i wait until i'm home after Work and then i let the magic begin.
if any other try the diety flash over his b03 slim7 then please let me/us know, if it's work.

Unjustified Dev said:
I built my own kernel from source to remove zte selinux changes that block magisk. I don't think locking the bootloader is necessary. If someone is already on a stock or stock-like Oreo build, without a vendor partition, they only have to flash system and boot.img. This can be done from fastboot.
Click to expand...
Click to collapse
@raystef66
Thanks for your work! Is the Kernel made by U-Dev included in this ROM and if not @Unjustified Dev could you please show us where to get it and thanks a lot

I had a complete crash on b03 this morning. Phone shut down out of nowhere and wouldn't boot anymore. I then saw this as an opportunity to test b04. So far most bugs (Gboard crashing, sms bug) are gone. I just can't find the D2W setting. Where is it?
Regards

boxemall said:
I had a complete crash on b03 this morning. Phone shut down out of nowhere and wouldn't boot anymore. I then saw this as an opportunity to test b04. So far most bugs (Gboard crashing, sms bug) are gone. I just can't find the D2W setting. Where is it?
Regards
Click to expand...
Click to collapse
Go to settings->featured->gesture&motion, under gesture.

silvbm said:
Go to settings->featured->gesture&motion, under gesture.
Click to expand...
Click to collapse
Ty!
that was it. I really didn't think of this. :good:
on a side note: i use HELIX Engine. [https://play.google.com/store/apps/details?id=com.teamhelix.helixengine]
it used to work fine on 7.1.1.
Now i'm getting this (see 1st attachment),
and i still get this shown every time i reboot. can i get rid of it somehow? it's annoying as it can't be sped up and feels way longer than 5 seconds... (see 2nd attachment)
regards

[MOD] 70-72Hz Display Mod for OnePlus6

70-72Hz Mod for OnePlus 6!
So here it is guys! Our own Display OC mod! Ever since Mi9 got one I really wanted to make one for OP6 too and after many sleepless nights and compiling various things, here it is! Let's talk about couple of things, is it safe? Mi9 users and K20 Pro users have a similar mod and they reported no screen damage so far. I will be testing this mod 24/7 and report how it affects my screen. I also used lower values just because 75Hz seemed bit unstable so this mod is pretty safe I'd say. 70Hz runs really.. well. Smoothly! :laugh: Can You notice the difference? Yes! Shocking how much difference there is in 10Hz. Battery life? Probably no impact at all since the OC is pretty small.
Can I flash it on 6T, santoni, vince, my new mt6580 phone?? No! Even though it won't brick Your phone, it simply won't work.
Compatibility? Most likely all Pie roms, maybe even without root.
How to Install:
Windows Users:
Extract the zip somewhere.
Reboot to fastboot and plug Your phone in.
Double tap on 70hz_recommended_flasher_windows.bat (Don't run it as admin)
Wait till it finishes flashing.
Reboot and enjoy!
Check screenshots in attached images!
Download:
70_72Hz Mod for OnePlus6
Stock 60Hz Flasher for OnePlus6
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You like my work, You can support me here!
https://www.paypal.me/protodevnan0
Credits:
ZhenXin and Andy Chan for original dtbo mod idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
[MOD] 70-72Hz Display Mod for OnePlus6 , Tool/Utility for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845/tree/oneplus/SDM845_P_9.0_Beta
Version Information
Status: Testing
Created 2019-07-27
Last Updated 2019-07-27

Reserved for future feedback
Edit: Can someone move it to mods/themes? Idk why it got posted here

Can you please make one for 6T?

Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?

Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
Having the same questions. Thanks in advance.

Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
Flash stock ota again

Works just great. ?

Tomatot- said:
Interesting. How to uninstall if something goes wrong?
And therefore, when do we need to flash it again? After every ROM update?
Click to expand...
Click to collapse
I'll post a back to stock flasher soon. And after every Full OxygenOS OTA You have to reflash it.

Twrp flashable zip ? I don't have my pc currently

ProtoDeVNan0 said:
I'll post a back to stock flasher soon. And after every Full OxygenOS OTA You have to reflash it.
Click to expand...
Click to collapse
Thanks. Does it modify the vendor partition or the system one? I'm wondering for custom roms udpates.

Tomatot- said:
Thanks. Does it modify the vendor partition or the system one? I'm wondering for custom roms udpates.
Click to expand...
Click to collapse
It modifies dtbo partition. So custom roms most likely won't ever touch this partition. Stock OTAs will though.

i installed it and it works............thank you

nice one

Where can I find the source code?

Macusercom said:
Where can I find the source code?
Click to expand...
Click to collapse
There's no source. It's just a modded stock dtbo.img.

how to uninstall it?

Can we flash this img via TWRP?

ProtoDeVNan0 said:
There's no source. It's just a modded stock dtbo.img.
Click to expand...
Click to collapse
But what did you mod?

igagan_ said:
how to uninstall it?
Click to expand...
Click to collapse
You can use 60Hz flasher. It will restore stock dtbo
Bloodwin said:
Can we flash this img via TWRP?
Click to expand...
Click to collapse
If Your TWRP supports dtbo flashing then sure. But if it doesn't then fastboot is the only option I guess.

I feel like I'm gonna get a speeding ticket on my way back home after I finish doing groceries. I need to flash this ASAP. ?

[ROM][G96xF/N][ALEXNDR] * Q Beta6 ZTA9 * DevBase v7.1 * Encryption support [Jan-15]

I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish Android Q BETA bug reports from my normal (Pie stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Q (One UI 2.0)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
S9 (SM-G960F/DS/FD):
>> G960FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9 Korean (SM-G960N):
>> [nobody sent me a dump yet] <<
Click to expand...
Click to collapse
S9+ Korean (SM-G965N):
>> G965NKSU2ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
Dirty flash over my Pie DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
NOTE1: This time it is mandatory to update also bootloader to Q - otherwise ROM will not boot
>> BL_G960FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965NKSU2ZTA9.zip <<
Click to expand...
Click to collapse
NOTE2: If you want to perform clean install with encryption - it is highly recommended to use TWRP 3.2.3.0 to format /data. More info about bug with TWRP 3.3.1.x - HERE
Known issues:
- SafetyNet does not pass (it is intended by Samsung in beta builds)
- Please let me know
Thanks to:
- all users mentioned in my main thread
- @henklbr for links to update.zip(s)
- @corsicanu & @ambasadii for tips related to Q beta

Do you want to provide dump (e.g. for G960F or a newer version for G965F)?
Please do as follow:
- Make sure OEM unlock is ON
- Flash TWRP but don't let device boot to system after that - use power+bixby+vol_up combo immediately after phone rebooted automatically
- Tap "Keep read only"
- Wipe -> Format data -> "yes"
- Reboot -> Recovery
- Copy attached zip to the device
- Flash it and wait a few minutes
- Copy /sdcard/G960F_dump directory to the PC and compresss it (zip / 7z / rar / etc..)
- Share me and wait for a new Q build
NOTE: DO NOT use Magisk or other boot patchers before you run my zip - I need PURE clean kernel and other images !!! After you run my zip and copy result to PC - you can do what you want

G960F? ????????

Wow, this is fast. Even though this just a test, I'll try and report soon
Sent from my SM-G965F using Tapatalk

Unable to flash magisk

Bookmark wait for more feedback

I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?

PrinceLc said:
Unable to flash magisk
Click to expand...
Click to collapse
Magisk is on board, there is no need to flash it separately
Ronam said:
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
Click to expand...
Click to collapse
First ROM, then BL (one by one). This order is recommended because BL update forces auto reboot

_alexndr said:
Magisk is on board, there is no need to flash it separately
First ROM, then BL (one by one). Ci order is required because BL update forces auto reboot
Click to expand...
Click to collapse
Thanks, i'll try it.

I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour

_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
What's that issue? I've had Soldier's Pie ROM before this one.

Ronam said:
What's that issue? I've had Soldier's Pie ROM before this one.
Click to expand...
Click to collapse
CSC just remain from Pie and CscFeatures does not work - you can dirty install RC2 to fix it
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
Just updated to RC2
Please re-download the ZIP file and re-flash the ROM

Can you make exposed work, the modules won't load

Mirror link? Mega stack at 44%

And where is TWRP 3.2.3.0

All fine flashed rc2 over soldier pie rom dirty

Thread has been updated again
This time due to new Beta 5 (ZSLG)
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZSLG_DevBase_v7.0_RC2.zip <<
Click to expand...
Click to collapse
Leejhay1714 said:
Mirror link? Mega stack at 44%
Click to expand...
Click to collapse
I will upload it also to AFH
amakuramio said:
And where is TWRP 3.2.3.0
Click to expand...
Click to collapse
G965F:
https://eu.dl.twrp.me/star2lte/
G960F:
https://eu.dl.twrp.me/starlte/

Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.

galaxy mini said:
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
Click to expand...
Click to collapse
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:

_alexndr said:
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
Click to expand...
Click to collapse
Are You still waiting on a dump for s9?
Isn't there a way we can edit the props to install on s9?