Database Develop

[GUIDE][HOW-TO] Huawei Ascend P7 [ROOT][RootGenius][P7-L10]

Huawei Ascend P7 - ROOT with RootGenius
!!! CAUTION !!! I´m not the Developer of this Tool. Use it at your own Risk
German Support you find HERE
​
Downloads:
RootGenius (KLICK)
Huawei HiSuite (KLICK)
Preparation:
Download Huawei HiSuite and install it on your PC
Activate USB Debugging on your Ascend P7 (Settings / About phone / Build number)
Tap a serveral times at Build number till you got a Message on the Screen that you´re now a Developer.
Then again on (Settings / Developer options), and activate USB Debugging.
Start HiSuite and connect the Ascend P7 via USB to the PC
If you do this the 1st time, HiSuite installs a Daemon on the Ascend P7
Choose as Connection Mode on the Ascend P7 HiSuite
If everything is OK then you can disconnect the Ascend P7 from the PC and close HiSuite
Execution:
Download the RootGenius Tool and start it as an Admin
Connect the Ascend P7 via USB to the PC
Chose as Connection Mode on the Ascend P7 HiSuite
Click on Root Button in RootGenius
Wait a few Seconds, the Root process runs automatic
The Ascend P7 reboots during the ROOT Process
SuperSU is also now on the Ascend P7
You can check ROOT by RootChecker from the Play Store
I am not responsible for any Damage that can happen to your Device. Use this Guide on your own Risk !!!!​

Someone already tested that it works?

On my Ascend P7-L10 Build-Number : P7-L10V100R001C00B121SP01 it workes with no Problems.
SuperSU update via PlayStore and the Device is rooted.
Regards

SeverusSnape said:
On my Ascend P7-L10 Build-Number : P7-L10V100R001C00B121SP01 it workes with no Problems.
SuperSU update via PlayStore and the Device is rooted.
Regards
Click to expand...
Click to collapse
Thank you.
The factory upgrade can then be applied? I do not want to replace rom, just use backup program. Eg titanium backup
Previous phone, a galaxy gio was running on CM7. I have used the factory rom for 2 days. Therefore, there is no experience regarding the factory upgrades. D

Sorry for that, but i don´t know if Factory Updates can be applied, because there is no newer Rom available.
I don´t found a Download for the Stock Rom that was installed at delivery.
Regards

I've rooted my P7-L00 with the same method and it's ok to do so. Regards

Great to hear the it also works on other Variants of the Ascend P7 too.
Regards

Hi.
Does anybody have problem with editing /systems/etc/hosts file? It looks like "HTC S-ON"(system partition read only). I notice that after trying using Adaway(https://sufficientlysecure.org/index.php/adaway/).

On my P7 ist the newest Firmware B121SP01 installed, and i have no Problems to write with RootExplorer on System Partition.
Regards

Hi all,
I just received my Ascend P7-00.
After 2 updates, it is in version P7-L00V100R001C17B122SP01 and impossible to root it with the version 1.9.6 of Root Genius !
If you have any idea how to do it, I'll be glad (I need to remove all chinese apps which are polluting my phone !)
Regards

Ygrek-Ix said:
Hi.
Does anybody have problem with editing /systems/etc/hosts file? It looks like "HTC S-ON"(system partition read only). I notice that after trying using Adaway(https://sufficientlysecure.org/index.php/adaway/).
Click to expand...
Click to collapse
yeah adaway strangely cant get into files..

pyb38 said:
Hi all,
I just received my Ascend P7-00.
After 2 updates, it is in version P7-L00V100R001C17B122SP01 and impossible to root it with the version 1.9.6 of Root Genius !
If you have any idea how to do it, I'll be glad (I need to remove all chinese apps which are polluting my phone !)
Regards
Click to expand...
Click to collapse
Do you still have these problems? I may be able to help.

I have the same problems with my HUAWEI P7-L10 (P7-L10V100R001C00B116SP03)
I tried RootGenius v1.9.6 and v1.9.4 as well (AntiVirus deactivated) but both times it said that this device is not supported.
Has anyone an idea what I'm doing wrong?

whitespace said:
I have the same problems with my HUAWEI P7-L10 (P7-L10V100R001C00B116SP03)
I tried RootGenius v1.9.6 and v1.9.4 as well (AntiVirus deactivated) but both times it said that this device is not supported.
Has anyone an idea what I'm doing wrong?
Click to expand...
Click to collapse
I doubt you are doing anything wrong. I'm guessing you have upgraded your phone since you bought it. In some of the more recent Huawei upgrades for the Ascend P7, changes have been introduced by Huawei that render RootGenius and Vroot incompatible. I found the only answer was to revert the phone to an earlier build, root it with either RootGenius or Vroot and then apply the upgrades through HiSuite. This way you don't lose root.
The original rom for the L10 can be found here:
http://android-host.de/HUAWEI/P7/B121SP01/B121SP01.zip
It's a large download.
Once you have it, you need to extract the zip on your computer and then place the dload folder and its contents (update.app) onto a USB stick or your micro SD card and apply the update (settings/updates/system updates) using either the local update (SD card) or USB drive option. I think this should work but I don't have the same variant as you so I can't test. Nor can I guarantee it.
Most of the info on the P7 is in this thread:
http://forum.xda-developers.com/showthread.php?t=2643183
You may want to check it out before you do anything. A lot of the contributors have the L10.
Hope this helps

Thanks @arthios for your trick,
You're right, I made the updates before rooting my device.
Unfortunately, I have a L00 version. I need to find the good ROM.
I'll let you know !

pyb38 said:
Thanks @arthios for your trick,
You're right, I made the updates before rooting my device.
Unfortunately, I have a L00 version. I need to find the good ROM.
I'll let you know !
Click to expand...
Click to collapse
OK. You're in luck. The web site "needrom.com" has ROMs for the L00. You'll need to create an account before you can download. I suggest you take the most recent. I think it's build 119. Download it, extract the file to your computer, copy the dload folder and its contents to either SD or USB and using the phone, apply the update. Once it's all done you can root with RootGenius. I replaced the RootGenius binary with SuperSu from the play store. That's just my personal preference but you don't have to. Once rooted you can apply updates through HiSuite. Suggest you retain the ROM you download in case you need to repeat the exercise at some time in the future.

arthios said:
OK. You're in luck. The web site "needrom.com" has ROMs for the L00. You'll need to create an account before you can download. I suggest you take the most recent. I think it's build 119. Download it, extract the file to your computer, copy the dload folder and its contents to either SD or USB and using the phone, apply the update. Once it's all done you can root with RootGenius. I replaced the RootGenius binary with SuperSu from the play store. That's just my personal preference but you don't have to. Once rooted you can apply updates through HiSuite. Suggest you retain the ROM you download in case you need to repeat the exercise at some time in the future.
Click to expand...
Click to collapse
is there a way i can add google account to my L00 (CHINA UNICOM version). My problem is that i cannot sync my gmail contacts. and i use gmail contacts everywhere- on my iPhone and othe phones. Pls advice.

puneetmi said:
is there a way i can add google account to my L00 (CHINA UNICOM version). My problem is that i cannot sync my gmail contacts. and i use gmail contacts everywhere- on my iPhone and othe phones. Pls advice.
Click to expand...
Click to collapse
Hi !
I had the same issue.
I found (somewhere here) an apk called Google Installer which allow you to install Google apps without being rooted.
It helps me to install the synchronization of my contacts from my Google account.
Regards

pyb38 said:
Hi !
I had the same issue.
I found (somewhere here) an apk called Google Installer which allow you to install Google apps without being rooted.
It helps me to install the synchronization of my contacts from my Google account.
Regards
Click to expand...
Click to collapse
thanks man.. it worked like a charm..are there any custom ROMs available for this device? and how to install TWRP or CWM recovery on this device?
Regards

puneetmi said:
thanks man.. it worked like a charm..are there any custom ROMs available for this device? and how to install TWRP or CWM recovery on this device?
Regards
Click to expand...
Click to collapse
It seems that some guys are working on an alternative recovery. But it still under work !
Concerning custom ROMs, I just find one on a russian site. But for now that's all I found ...
I hope that some developers will fall in love for this device
It could help to have a specific folder in xda !

[Z2Pro] Zui 2.5.462 OTA (Nougat) full rom+firmware update (Magisk+Xposed work !)

Hi !
This is a backup of the latest OTA of ZUI by Zuk/Lenovo, already configured in english, chineses apps uninstalled, and playstore/google services installed.
Magisk root and unofficial Xposed-Magisk for Nougat work on this rom !
(I've tested Youtube Adaway, Youtube background, Lucky Patcher, Adblocker reborn, it's working well)
Your not need to do a wipe, and you can keep your data if you come to 2.5.435 ZUI rom ! But you have obligation to install boot & firmware, because latest OTA by zuk upgrade both !
[Quick Charge is disabled by default when the screen is on, look the screen capture, it's normal, this is a new setting come with this latest OTA, you can change that on developper settings ! ]
Link to download (hosted on my own webserver) : http://osremix.com/share/ZUI_2.5.462_ST_Clean_Android_7.0-TWRP_3.1.0.0_z2pro_2121.7z
MD5sum : dc9865f17bcfcdb141e0bf34f9612d0a
Magisk 13.3 (update to the latest APK when the apps purpose it to you) : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Latest Xposed for Magisk (SDK24/Android 7.0) : http://main.purifyos.it/xposed/magisk/SDK24/
Xposed manager APK : https://forum.xda-developers.com/devdb/project/?id=13191#downloads
​

The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?

Is there any chance of multilanguage for this rom?

Bryandu13 said:
The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?
Click to expand...
Click to collapse
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
Billkaza said:
Is there any chance of multilanguage for this rom?
Click to expand...
Click to collapse
I don't know how to merge XML translation into rom, sorry.

After receiving OTA update to 462 ST, SOT is reduced to 4 hours of moderate usage (usually 5-6 hours).. Phone temperature is a bit warmer, standby temp usally 27 C, now is 32 C, charging temp is around 37 C.. It's a thin phone, you can feel when the temperature is going up..

Is the OTA update works in this rom? In System Update app I have info: "Your system has been root, we are unable to provide the latest version of the system"

ZUI OTA doesn't support unlocked bootloader, rooted or not the phone just shows this message when the bootloader is unlocked...

Hello, someone has already gained some experience about this Rom, is there anything you should know? Thank you

Anyone can help making this rom multilanguage?

Is francko76 the only one who can help us, or can anyone ask the creator of AEX?

how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?

xxjahasotoxx said:
how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?
Click to expand...
Click to collapse
how to install?

Giovanni Bruno said:
how to install?
Click to expand...
Click to collapse
If you're asking his to install this I made a backup of my current stock rom, and then looked in my files for the name of the backup that I made and put the twrp files folder in the same folder that the backup was in, after that just go to twrp and select restore and select twrp files as your restore
Edit 1: so apperantly I can make calls and receive them but I can't hear anyone and they can't hear me
Any ideas as to what I should try?

we can add any languag by morelocal2 app
in play store

would somene post the u-health app in this rom, thanks
camera apk as well plz...
thanks

Now I'd really would try your rom, bitte wherever and wherever I try to download, IT proceeds to 70%,and thats it, nö further progress...

tikilou said:
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
I don't know how to merge XML translation into rom, sorry.
Click to expand...
Click to collapse
How do you install this backup? with TWRP?
We have to put the file in specific directory?

I used your backup to switch successfully from aex 4.5 to stock. Thank you very much.
@tikilou i would like to know how you backed up stock recovery since we restore it with TWRP

jppsousa said:
How do you install this backup? with TWRP?
We have to put the file in specific directory?
Click to expand...
Click to collapse
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp

chtsarts said:
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp
Click to expand...
Click to collapse
I think someone should finaly mention which Partitions should only be restored from a Backup of another user. Keep Radio & imeis in mind guys

Huawei p9 problem

Hi all. I have huawei p9 eva l19 and after rollback to mm any theme won`t apply. I have eva l19c432b182 and everything works fine but just theme won`t, it says applied but nothing. I have old emui icons for stock apps like camera, gallery...
I have locked bootloader and nonrooted device, stock recovery too.
Can anyone help me?

Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset

zgfg said:
Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset
Click to expand...
Click to collapse
Thank you for answer. When i flashed b182 update(dload method) after that phone did factory reset, and after that power on.
Do i need to factory reset again? When i installed b182 in my folder dload was only update.app(3.22gb), do i need to have other files in dload folder or just update.app? i missing stock apps like compass, mirror... Maybe i need to flash some data files but i don`t know how without root or bootloader, and i would like to not root my device. What to do?

Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443

zgfg said:
Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443
Click to expand...
Click to collapse
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?

Kovacc56 said:
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?
Click to expand...
Click to collapse
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7

zgfg said:
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
Click to expand...
Click to collapse
Ye i remember i followed that instructions, first is for stock recovery and i have it and second is for stock firmware, i downloaded that l19 b182 from that link in his guide. I think i will have themes when i update my phone to b383, i have update in `about phone` but i like mm more... But don`t know how to solve my problem now with mm... Maybe u missed that apps too but u didn`t notice it, rly don`t know. Do anyone else know what do do?

How to rebrand any P10 Plus to vky-l29c432 (dual sim) for beginners

NB :
- Repacked the HWOTA8 files so you don't have to download stuff you don't need
- Added oeminfo files link
If this tutorial does not work for you, use the ****** tutorial, just Google it.
ONLY WORKS ON VKY MODELS!
I created this thread for people like me who found it difficult to follow the other tutorials, guaranteed to work from oreo to oreo.
This is a simple tutorial for beginners on how to rebrand vky-L09 to vky-l29c432
A. Files needed
1. Download the original vky-l29c432b360 firmware from the firmware finder website
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2325/g1699/v120287/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...87/f1/full/public/update_data_full_public.zip (Rename to update_data_public.zip)
http://update.hicloud.com:8180/TDS/...l/VKY-L29_hw_eu/update_full_VKY-L29_hw_eu.zip (Rename to update_all_hw.zip)
2. Download the HWOTA8 repack package https://drive.google.com/open?id=12zXvow8pz8osj-XYMMfY5jRNyKQDFZNg
3. Download minimal adb and fastboot https://www.androidfilehost.com/?fid=746010030569952951
4. Download twrp from https://www.androidfilehost.com/?fid=818070582850499350 (rename it to twrp.img)
5. Download the vky-l29c432 oeminfo files from https://forum.xda-developers.com/p1...32-oeminfo-t3590134/post71874883#post71874883
B. Tutorial
1. Get your bootloader unlock code using DC Unlocker or the Huawei official site.
2. Install minimal adb and fastboot, open it. Switch of your phone, press volume down and plug in USB to enter fastboot mode, while in fastboot type 'fastboot oem unlock your-unlock-password'
Something should pop up on your phone, press yes. The device will automatically restart and format. After that the bootloader is unlocked.
3. Enter fastboot mode again, move twrp.img to c:/ directory. After that type fastboot flash recovery_ramdisk c :/twrp.img. Everything should go through. After that you have flashed twrp custom recovery.
4. Enter twrp custom recovery by pressing volume up and power till you reach twrp recovery. While in twrp go to back up and back up oeminfo (2 times) on SD card.
5. Copy the 3 downloaded firmware files from the firmware finder website (update.zip, update_data_public. Zip and update_all_hw.zip) to HWOTA8 folder in MicoSD card.
6. Go to the downloaded HWOTA8 package and extract only (hwota8_update.zip and MHA_Recovery_NoCheck.img to the HWOTA8 folder on SD card.
7. Replace the oeminfo files from twrp > backup from SD card with oeminfo.emmc.win and oeminfo.emmc.win.wid5 from the vky-l29c432.
7. Go to twrp recovery again and go to restore to restore the new oeminfo files, after that go to wipe > advanced and wipe system only. After go to install and install hwota8_update.zip from. The HWOTA8 folder in SD card.
8. The phone should restart and install vky-l29c432 firmware
9. If it doesn't, unlock the bootloader again (if locked) and then flash twrp recovery again, then restore the oeminfo again then install hwota8_updatezip.zip from the HWOTA8 folder again, it will boot now and install vky-l29c432b360.
10. You're now done. Enjoy your rebranded vky-l29c432.

HWOTA8zip is empty folders from what i can see, would love to finish this dual sim rebrand but im having zero luck and your guide seems the most simplified but im stuck

fromilla said:
HWOTA8zip is empty folders from what i can see, would love to finish this dual sim rebrand but im having zero luck and your guide seems the most simplified but im stuck
Click to expand...
Click to collapse
I've updated the link

fromilla said:
HWOTA8zip is empty folders from what i can see, would love to finish this dual sim rebrand but im having zero luck and your guide seems the most simplified but im stuck
Click to expand...
Click to collapse
Thanks for the comment

Hi
New user and new to tinkering with Android but tech savvy (i think).
However i am stuck on part 6, the two files listed "hwota8_updatezip" & "mha_recovery_NoCheck.img" do not appear within the HWOTA8 package? Unless i am going completely mad?
Inside the HWOTA8 package i have update.zip, update_all_hw.zip and update_data_public.zip (which are of course the same as the other 3 files you had us download).
Also i have a "vky_recovery_NoCheck.img" but not the mha one?
Sorry for newbie questions

Euromir said:
Hi
New user and new to tinkering with Android but tech savvy (i think).
However i am stuck on part 6, the two files listed "hwota8_updatezip" & "mha_recovery_NoCheck.img" do not appear within the HWOTA8 package? Unless i am going completely mad?
Inside the HWOTA8 package i have update.zip, update_all_hw.zip and update_data_public.zip (which are of course the same as the other 3 files you had us download).
Also i have a "vky_recovery_NoCheck.img" but not the mha one?
Sorry for newbie questions
Click to expand...
Click to collapse
Sorry for the late reply but everything has been updated

Euromir said:
Hi
New user and new to tinkering with Android but tech savvy (i think).
However i am stuck on part 6, the two files listed "hwota8_updatezip" & "mha_recovery_NoCheck.img" do not appear within the HWOTA8 package? Unless i am going completely mad?
Inside the HWOTA8 package i have update.zip, update_all_hw.zip and update_data_public.zip (which are of course the same as the other 3 files you had us download).
Also i have a "vky_recovery_NoCheck.img" but not the mha one?
Sorry for newbie questions
Click to expand...
Click to collapse
All you need is provided in the links

msn44360 said:
All you need is provided in the links
Click to expand...
Click to collapse
So, it doesn't seem to work if you move the "HWOTA8 FILES REPACK" folder straight to your sd card. You actually have to rename/make a new folder named "HWOTA8". Found out the hard way.
So, the install fails at 6%. Any ideas?
I do have a VKY-AL00, chinese p10 plus, but it said for any. Restoring the oeminfo seems to work fine. Install also works, but fails at 6% every time.

I never said move the folder, read the tutorial properly

riverwalker92 said:
So, it doesn't seem to work if you move the "HWOTA8 FILES REPACK" folder straight to your sd card. You actually have to rename/make a new folder named "HWOTA8". Found out the hard way.
So, the install fails at 6%. Any ideas?
I do have a VKY-AL00, chinese p10 plus, but it said for any. Restoring the oeminfo seems to work fine. Install also works, but fails at 6% every time.
Click to expand...
Click to collapse
Did you wipe the system?

Help
Hi, I have a p10 plus with the Chinese version of ROM and would like to switch to the global version. Can I use the same procedure as this tutorial? Would you have some video explaining to facilitate the exchange?
Thank you

msn44360 said:
Thanks for the comment
Click to expand...
Click to collapse
Hi friend.
I'm trying to rebrand and I followed all the instructions but, when the eRecovery screen shows up, nothing happens.
My second oeminfo backup file is .md5, not .sh2 like the one you shared to replace.
I'm on P10 Plus C636.
Thanks!

moscka said:
Hi friend.
I'm trying to rebrand and I followed all the instructions but, when the eRecovery screen shows up, nothing happens.
My second oeminfo backup file is .md5, not .sh2 like the one you shared to replace.
I'm on P10 Plus C636.
Thanks!
Click to expand...
Click to collapse
WhatsApp me https://chat.whatsapp.com/FNV5SqHuFxLHxtUv8Yfma4

msn44360 said:
WhatsApp me 0749402051
Click to expand...
Click to collapse
Can you help me? Please
Hi Friend, I have a p10 plus with the Chinese version of ROM and would like to switch to the global version. Can I use the same procedure as this tutorial? Would you have some video explaining to facilitate the exchange?

fjgandrade said:
Can you help me? Please
Hi Friend, I have a p10 plus with the Chinese version of ROM and would like to switch to the global version. Can I use the same procedure as this tutorial? Would you have some video explaining to facilitate the exchange?
Click to expand...
Click to collapse
I do not have a video as I do not have an extra device, but I can guarantee you that everything works 100%

msn44360 said:
Did you wipe the system?
Click to expand...
Click to collapse
yes, I tried once wiping it only before the first install and once wiping it before each install attempt. TWRP also remains on my phone after the first install, only the bootloader is locked again. As soon as i unlock it, the phone boots to twrp. Do I need to wipe some other stuff too? I did try flashing a bunch of other stuff before I found your posts.

riverwalker92 said:
yes, I tried once wiping it only before the first install and once wiping it before each install attempt. TWRP also remains on my phone after the first install, only the bootloader is locked again. As soon as i unlock it, the phone boots to twrp. Do I need to wipe some other stuff too? I did try flashing a bunch of other stuff before I found your posts.
Click to expand...
Click to collapse
If you need to contact me ASAP join the WhatsApp group, I rarely check my emails

Hi,
I try since weeks to bring my Chinese P10 plus VKY-AL00C00B217 to the L29 Version and found now your
explanation, unfortunately the link to the " HWOTA8 repack package" is empty.
I want to make sure that I work with the correct tools, so i want to load all you recommend.
Thanks for your help!
BR
Flodder

Flodder72 said:
Hi,
I try since weeks to bring my Chinese P10 plus VKY-AL00C00B217 to the L29 Version and found now your
explanation, unfortunately the link to the " HWOTA8 repack package" is empty.
I want to make sure that I work with the correct tools, so i want to load all you recommend.
Thanks for your help!
BR
Flodder
Click to expand...
Click to collapse
I have updated everything

msn44360 said:
I have updated everything
Click to expand...
Click to collapse
HI, thanks for your great help.
When I try to install the "hwota8_update.zip" it gives me following info:
"Zip file is corrupt!
Error installing zip file '/external_sd/HWOTA8/hwota8_update.zip"
Is it correct that I copy the "MHA_RECOVERY8_NoCheck.img" file twice and rename it to "VTR_RECOVERY_NoCheck.img" and one to"VTR_RECOVERY2_NoCheck.img"?
I tried it several times?!
Any idea?
Thanks a lot
Flodder72

Bootloop on pra_lx1 p8 lite 2017 oreo twrp and hurupdater issue

Hello everyone.
Last night i am tried to update my EMUI 5.0.2 Pra-lx1 p8 lite 2017 phone to the Oreo update 8.0.0.322 downloaded from Team TMs' huawei firmware finder.
My phone is allready "Bootloader unlocked" and "FRP unlocked" there is no problem. I can reach to TWRP( there is a huge problem i will explain it).
on the top of my way i got EMUI 5.0.2 and i unlocked the bootloader and FRP.
then i installed the EliteTWRP-3.2.1.
after this i downloaded
HuRUpdater 0_3.zip
and the 3 neccesery FullOTA-MV-OP files that includes the
update.zip
update_data_full_public.zip
update_full_PRA-L11_hw_eu.zip
then i do everything exatly on this thread
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
and voilla!!! i got the Oreo update installed.
BUT....
i dont get the file manager app its lost!
i can not get themes or get in any of huawei apps sign in or get in!
so for this. my next step is goint to do reflash the oreo how i did it again.
BUT....
i can not do this because the instaled TWRP does NOT support OREO. Applause for this
so i'am tried 3 different TWRP that can be used on HUAWEI phones.
First one is this i dont know who is the developer but ists intercafe is chinese or korean.
https://drive.google.com/file/d/1rlQPRP234PoXY_yqup3oK_joOZGSIker/view
i tried to instal this over adb fastboot. BUT I can NOT. Because Oreo will do this on RAMDISK_RECOVERY!!!! WOOOWWWW
i did this and i reinstaled the oreo update like i did it first but in this new TWRP.
İt flashed my OREO but on the bootlogo the HUAWEI opening sound curropted before finished the sound and gets to restart.
after restart eRecovery opens and give me TWO funcional choises!!! Like Jig SAW
anyway...
the first option is DOWNLOAD LATEST VERSION AND RECOVERY
BUT for my chanse!!!! or mean bad LUCK!!! eRecovery WiFi doesnt see the EDUROAMs ACCESS POINTS WELL RIGHT!!!!
so i passed the first one and we are on the MAGICAL point.
the second option is the WIPE DATA/FACTORY RESET
on this time i CAN NOT DO THIS BECAUSE THE ORGININAL RECOVERY PART IS GONE!!!! YEAP I CAN NOT DO FACTORY RESET.
WHEN i choose this option it will go to the TWRP recovery nice huh!? NO.
so what will i do i know my phone is not BRICKED YET! İF THERE İS TWRP THERE İS HOPE!
BUT I DO NOT KNOW WHAT SHOULD I DO RIGHT KNOW
please help me....

with this Recovery (TWRP)( not usefull beacuse you can not use them )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/recovery-recoveryoreonocheck-install-t3777974
i found this under a members signature and i give a try but it wont work this gives me just a big error
But this error gets my phone a factory reset after than i flashed this Recovery (better then the chinesee korean languges type one ;D )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/unofficial-twrp-3-2-1-0-oreo-t3773970
and i tried to flash the Oreo update again with HuRUpdater_0_3.zip
but now I am at the begining. System works there is no issue over hardware.
But there is missing system apps like File Manager. Themes and so on....
And the best thing is The BUILD NUMBER is 8.0.0.046(08TO)
BUT I flashed the f*ckn' 8.0.0.322!!!!! WHY GOD!!!! WHY!!!!
Could anybody iluminte about what the hell is going on right now please i need to know why is why

Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip

marstonpear said:
Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip
Click to expand...
Click to collapse
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .

z1rqdym said:
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .
Click to expand...
Click to collapse
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.

marstonpear said:
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.
Click to expand...
Click to collapse
there is a misunderstood i allready rename the 3 update files. i used two times the nocheck recovery method and works well but the issue is the same. i only dont rename the hurupdater file. i will give a try now.

Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted

marstonpear said:
Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted
Click to expand...
Click to collapse
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.

z1rqdym said:
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.
Click to expand...
Click to collapse
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!

marstonpear said:
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!
Click to expand...
Click to collapse
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?

z1rqdym said:
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?
Click to expand...
Click to collapse
I don't think it changes the IMEI. I had a pra-lx1c464(Turkey) and I rebranded it to c432 I had no issues with it. It will change your device to Dual-SIM though if you have a single SIM device, which has no effect at all. I can still use my bootloader unlock code, and I have used it many time again and again after rebranding the device. Also you're trying to install PRA-LX1C432B322 Oreo right? Your device should be branded as PRA-LX1C432 first

is it neccesery to download the nougat rom from eRecovery over wifi?

z1rqdym said:
is it neccesery to download the nougat rom from eRecovery over wifi?
Click to expand...
Click to collapse
I'm not sure but it is necessary to have it branded as PRA-LX1C432

I will give a try flash the oeminfo c432 then try to flash nougat with nocheck image.

nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.

Factory reset
z1rqdym said:
nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.
Click to expand...
Click to collapse
Have you tried to reset the phone to its factory defaults . In this way I fixed missing apps problem .

I tried factory reset over Recovery bu it doesnt changed any thing. Then i tried the factory reset from the settings of the rom. Same result.

I just installed it manually. I have the 8.0.0.46 (08TO) but I don't have any issue, I have apps and themes..is it correct the version not should I expecting something different?
Please let me know

Same build number as in my settings. Themes wont work because regional issues. When i change phones language to english themes apps works well. Thats the themes app i admit it but.. in the other hand i dont get the in games(i dont remember the original name of it) app comes with oreo. I dont have the huawei login future anymore i think this is because of the unlocked bootloader not tried to look again then do a factory reset. I can not rebrand my phone. I know because when i flash europen oeminfo or not if i install the stock emui 5.0.3 again it says no build number against test keys . On the other side i can use my phone well i dont have any problem. And i forgot to say i dont even the file manager i installed the hidisk apk that i found on internet.
My advise is dont do this to your phones wait for a official update. But for us this is a long hard road