[ROM][4.4.4]CyanogenMod 11 for Huawei y560-u02[PORT] - Huawei Y5 (2017) ROMs, Kernels, Recoveries, & Othe

What's working: ril(calls, sms, mobile data for both SIMs), wifi, bluetooth, camera, torch, advanced power menu, hardware rendering, settings, Superuser.
This Cyanogenmod 11 is ported for Huawei Y560-U02, chipset sc7731g, platform sc8830.
This ROM is suitable for daily use.
Copy to microSD card Cyanogenmod 11 ROM. Reboot to recovery (TWRP).
Wipe (without rm-rf): dalvik cache, data, cache. Flash Rom through TWRP. After flashing - factory reset.
Reboot system, setup sim cards. Check APN. If it is not written, write it yourself. Done.
ROM :
https://drive.google.com/file/d/1DblNqOz3aTjLjTwicMsJuJrEWS3b8KtK/view?usp=sharing -
signed_cm11_core33g
Fix wifi_hotspot :
https://drive.google.com/file/d/1RqjwXgd17EpShiNcmdB5CBLIr02vNEIt/view?usp=sharing
Flash wifi_hotspot zip file via TWRP.
TWRP 3.0.2-0_en:
https://drive.google.com/file/d/1vJOnjEBEIkwAqtoAfd6tAL7msnAgEjbn/view?usp=sharing
Open es file explorer , go to device/efs/imei/imeino1 and imeino2 , write your imei numbers.Reboot. Calls and sms will works without this, but better to write your imei numbers.
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing
Do it on your own risk.
Injoi! View attachment 5175015

Gapps for this?
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?

Otaku780 said:
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?
Click to expand...
Click to collapse
Welcome
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing

Sims stuck on 2G
For some reasons I can't enable 3G, I've entered my APN manually and edited the imei values to match the old ones, still stuck on 2G.
There used to be an option in the stock rom to choose which SIM gets the 3G and which sticks with 2G, didn't find it here.
Also I can't set the screen brightness to auto, is this happening with everyone or just me?

Otaku780 said:
For some reasons I can't enable 3G ...
Click to expand...
Click to collapse
In our phones 3G(and lower) works only in first slot for sim card. Second slot uses only 2G(and lower).
In first slot set your sim card, that you need for 3G, and then write APN.
Same to do with your second slot and second sim card. Done.
Auto brightness doesn't work. I don't know why... I never used it, sorry...

Wifi hotspot?
Hello, thank you for your reply, but I'm yet to be able to enable 3G (2G works fine tho), and I've noticed that I can't enable the Wifi hotspot, as soon as the slider is enabled, it goes back off (pretty much like the 3G thing).
So I'm guessing there is something wrong with my setup? I used TWRP 2.8.7.0 but I don't see how it allows things to work and others not to, can it be the reason? And would flashing it again make it work (with the Gapps you provided, I'm having google store issues).
Thanks in advance.

Otaku780 said:
Hello
Click to expand...
Click to collapse
Hello. This gapps from thread:[ROM][4.4.4][UNOFFICIAL][SM-G360H] CyanogenMod 11 for Samsung Galaxy Core Prime , there i have ported ROM. I don't like gapps and don't use it.
3G(in first slot) works perfectly for me, why you have issues?.. It's strange...
You can to use TWRP 3.0.2-0 from this thread, but i don't think that it will solve problem...

Backing up and trying again
I'm thankful for all of your hard work, I am backing up and will flash again (cm_11 and gapps) and will see what happens.
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.

Otaku780 said:
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.
Click to expand...
Click to collapse
Hello and thank you!
For 5.1.1 we haven't kernel... When i have ported ROM, also ported boot.img, replaced split_img(zImage, dtb, etc) and have changed some thing in ramdisk. This phone still haven't update to 5.0, that we will can to use boot.img for porting... So, we can't to port any ROM higher 4.4.4
All this is very sad...
Also,it's very important, need to have bigger knowledge and experience, than i have

Deleted

What's the difference?
amiro13 said:
Forgot...
I have ported also one cm11 ROM, from here :
https://forum.xda-developers.com/ga...cyanogenmod-11-samsung-galaxy-core-2-t3308697
You can to try it :
https://drive.google.com/file/d/1IgEv7xcrageSnbD1RsiroZUv4g_edyX3/view?usp=sharing - signed_cm11_kanas
For now, i use this ROM.
Click to expand...
Click to collapse
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?

Update
Otaku780 said:
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?
Click to expand...
Click to collapse
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.

Otaku780 said:
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.
Click to expand...
Click to collapse
Wifi hotspot - fixed.
Good luck

Hi...I have ported this rom for my device. It also runs the same chipset(ie sc7731). But the camera isn't working. How to fix it. Please help...!!

[email protected] said:
... But the camera isn't working. How to fix it. Please help...!!
Click to expand...
Click to collapse
Hi
I have fixed the camera with this guide. Try it.
Good luck

amiro13 said:
Hi
I have fixed the camera with this guide. Try it.
Good luck
Click to expand...
Click to collapse
Thanks but I have already tried that... didn't work for me..

[email protected] said:
Thanks but I have already tried that... didn't work for me..
Click to expand...
Click to collapse
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .

amiro13 said:
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .
Click to expand...
Click to collapse
Thanks a lot....I will surely try that. :good:

[email protected] said:
Thanks a lot....I will surely try that. :good:
Click to expand...
Click to collapse
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:

amiro13 said:
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:
Click to expand...
Click to collapse
Thanks a lot...it just worked actually I was doing it wrong for the hole time but I did it... thanks man. But few other problems that were not before are now there like
2 sims not working...
Wifi not enabling...
And many more but thankfully I got some fixes for those from romclaims....!!! But again I must say thanks for your help.

Related

[GUIDE] How To Fix GPS Issues On CM7

Sup People.
I recently noticed that my GPS wasnt working on CM 7.1.0.1. After searching this forum I found that quite a few people were also having the same issues so i've decided to compile this guide (all credits to OP's, i'm just putting this info in one place)...
theres not much to it to be honest, its just the information on the issue is just scattered around - plus there are probably better and more complete guides out there
Firstly, Originally Posted by bharat_xda19
bharat_xda19 said:
First install cm7 and then make a nandroid backup of it. Then wipe everything and restore the previous nandroid backup of stock froyo rom (or any rom with working gps) and use gps to capture your location. Then again wipe everything and restore the cm7 backup. Now gps will be working. And once gps on cm7 works, then even after a hard reset it still works. This seems to be an issue only when freshly installing cm7. This is definitely a safe method.
Click to expand...
Click to collapse
The next procedures are really for advanced users only...or if you know what you are doing if you dont understand anything in this next part I would do a little reading on the topic first
Secondly, Originally Posted by CroWarrior
CroWarrior said:
I found out in this topic here:
http://forum.cyanogenmod.com/topic/2...s-doesnt-work/
that some people fixed issues with this radio:
Radio_13.53.55.24H_3.35.19.25
Click to expand...
Click to collapse
OR
[OP - http://forum.xda-developers.com/showthread.php?t=1029318&highlight=flash+a+radio by 3xeno]
3xeno said:
-- The following will only work with Clockworkmod 2.5.x.
1. To get Clockworkmod 2.x when you have a newer version, flash the 'update1.zip' in the attachments
2. If you have ROM Manager, use the 'select older cwm' at the bottom of the list to select 2.5.0.7
-- Make sure you have sufficient battery charge and do not interrupt the flashing process.
•Radio_13.55.55.24H_3.35.20.10
•Radio_13.53.55.24H_3.35.19.25
•Radio_13.53.55.24H_3.35.15.31
Click to expand...
Click to collapse
THEN...
nejc121 (edited by arkoze) said:
Download radio zip above [19.25 or 20.10 as you probably have 15.31]
Put Radio .zip on root of SD card i.e not in any folders
Start ROM Manager
(ensure you have CWM 2.x.x.x)
Click Reboot into Recovery
Flash .zip from here by going to install zip from SD card
Don't forget to wipe caches first
Reboot phone by using the "reboot" option in cwm NOT by removing the battery
Click to expand...
Click to collapse
The process will take about 10 mins so be patient
Make sure you have sufficient battery charge and do not interrupt the flashing process.
I used the 3xeno and nejc121 method's above. Downgraded my CWM (which is only temporary if selecting through ROM manager) then flashed the 20.10 radio. 3xeno recomends flashing the 19.25 radio first to see if that works but i went straight for the 20.10 = WORKING GPS
!!!DISCLAIMER!!!
I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. IT IS YOUR DECISION TO GO AHEAD WITH THESE MODS SO ONLY YOU CAN BE BLAMED FOR YOUR ACTIONS
p.s. if followed correctly, you shouldn't go wrong
In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi
slymobi said:
In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi
Click to expand...
Click to collapse
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
yes here they are
slymobi said:
yes here they are
Click to expand...
Click to collapse
thank you so much
apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
the links still work. just dont use the megaupload one, scroll down and use other options
Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?
MacGyver Jack said:
Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?
Click to expand...
Click to collapse
Try using an app that triggers gps like gps test from the market. It worked 99% of the cases for me.
Sent from my HTC Wildfire using Tapatalk 2 Beta-5

[FIX][i9300][26/10/2013]Camera stopped working, error on Samsung based ROMs

I want to offer you a little fix for those of you who actually experience this problem. On some Samsung based ROMs, some people complain about not working cameras, no matter how often they tried to install a ROM after several wipes. This error may occur in case your camera uses a different firmware.
Most people however won´t experience this error.
I´ve created a little Fix which is actually very easy to apply as a flashable zip. It was intended to be used with my Samsung Galaxy S3 ROM, it may also work with every other Samsung based ROM
Here is the link: Camera Fix for Samsung based ROMs
Simply install this file through your custom recovery
Just in case this patch should not work for everyone, leave me a comment and I´ll see what I can do :angel:
What does it do?
Sent from my CM10.3 Galaxy S3.
This fix includes one missing binary which some specific cameras require in order to be able to be used.
If you don´t have any trouble starting the camera app, using the camera, you don´t need to flash this zip Even if everything works fine and you do install this fix, it wouldn´t harm your system
habylab said:
What does it do?
Sent from my CM10.3 Galaxy S3.
Click to expand...
Click to collapse
just flashed it, doesn`t work for me unfortunately. :crying: :crying: :crying:
i have this problem you told of since a very long time and i really can't get rid of it. makes me fckn sick. i could cry on and on.
what else is possible to do? every litte hint is very much appreciated.
There are more binaries available, the one I included is a more common one. Samsung uses 2 different cameras ( Sony or Samsung ).
Does your camera work 100% with a Stock ROM ? If so, have a closer look in /data/cfw and show me what you find inside ( eg. SlimISP_xx.bin ).
Flash a Stock Firmware, make sure to copy the file and add it here as a zip file. By installing custom ROMs, your cfw folder will be empty most the time if these files are not added by the ROM itself.
g.ott said:
just flashed it, doesn`t work for me unfortunately. :crying: :crying: :crying:
i have this problem you told of since a very long time and i really can't get rid of it. makes me fckn sick. i could cry on and on.
what else is possible to do? every litte hint is very much appreciated.
Click to expand...
Click to collapse
If that fix not help you can maybe make a camera fw upgrade.
[tapatalk]printed, scanned and faxed...[/tapatalk]
hi guys,
thx a lot for your words. here is what i've done:
i just flashed a stock rom and the camera works. then i installed cf root and root explorer but /data/cfw is an empty folder. so i can`t copy anything here.
with the custom rom and the cam not working i had a file like SlimlSp00.bin (or something similar) in this particular folder but not now.
what to do now or did i misunderstand something?
Gorgtech said:
There are more binaries available, the one I included is a more common one. Samsung uses 2 different cameras ( Sony or Samsung ).
Does your camera work 100% with a Stock ROM ? If so, have a closer look in /data/cfw and show me what you find inside ( eg. SlimISP_xx.bin ).
Flash a Stock Firmware, make sure to copy the file and add it here as a zip file. By installing custom ROMs, your cfw folder will be empty most the time if these files are not added by the ROM itself.
Click to expand...
Click to collapse
Just out of curiosity, did you try to remove this file ? Maybe your camera tries to load this binary though it´s not suitable for your model. You can try to create a different folder and first copy the found bin ( just to have a spare copy ), remove SlimlSpxxx out of your data/cfw folder.
Wipe your Dalvik Cache and restart the ROM
g.ott said:
hi guys,
thx a lot for your words. here is what i've done:
i just flashed a stock rom and the camera works. then i installed cf root and root explorer but /data/cfw is an empty folder. so i can`t copy anything here.
with the custom rom and the cam not working i had a file like SlimlSp00.bin (or something similar) in this particular folder but not now.
what to do now or did i misunderstand something?
Click to expand...
Click to collapse
this idea didn't come up of course
but i just tested it. i already had my custom rom backup restored. i moved the SlimlSP_BH.bin to my ext sd, so that /data/cfw was empty, rebooted to recovery, wiped dalvik and it doesn't worked. second try i wiped cache and dalvik and it also doesn`t work.
Gorgtech said:
Just out of curiosity, did you try to remove this file ? Maybe your camera tries to load this binary though it´s not suitable for your model. You can try to create a different folder and first copy the found bin ( just to have a spare copy ), remove SlimlSpxxx out of your data/cfw folder.
Wipe your Dalvik Cache and restart the ROM
Click to expand...
Click to collapse
If your camera doesn´t work with this binary, you may need another one..and there are lots of them to try but you have to chose one which is suitable for a Sony or a Samsung camera Well, there is a easier way out if you try to upgrade your camera firmware.
Before we proceed, I need some details first, which type of camera you have in order to pick up a suitable binary.
1) Dial *#34971539#
2) pick up this option: "Phone/Cam FW Check"
3) Show me what you see
4) Chose this option: "Phone/Cam FW Write"
A short explanation :
GDxxx = Sony
ZFxxx = Samsung
g.ott said:
this idea didn't come up of course
but i just tested it. i already had my custom rom backup restored. i moved the SlimlSP_BH.bin to my ext sd, so that /data/cfw was empty, rebooted to recovery, wiped dalvik and it doesn't worked. second try i wiped cache and dalvik and it also doesn`t work.
Click to expand...
Click to collapse
alright, i for sure will give you every information you need.
under "phone/cam fw ver check" i see
rear camera
cam fw ver: GDF
phone fw ver: GDFI02
front camera
cam&phone fw ver: S5K6A3
"Phone/Cam FW Write" isn't available in that form. options with "write" are only "phone to cam fw write (rear)" (but this is greyed out so i can't touch it) and "fw write count".
Gorgtech said:
If your camera doesn´t work with this binary, you may need another one..and there are lots of them to try but you have to chose one which is suitable for a Sony or a Samsung camera Well, there is a easier way out if you try to upgrade your camera firmware.
Before we proceed, I need some details first, which type of camera you have in order to pick up a suitable binary.
1) Dial *#34971539#
2) pick up this option: "Phone/Cam FW Check"
3) Show me what you see
4) Chose this option: "Phone/Cam FW Write"
A short explanation :
GDxxx = Sony
ZFxxx = Samsung
Click to expand...
Click to collapse
hi gorgtech, are you still here?
I´m still here but I´m not quite sure how to help you out. There is another way to enforce an upgrade of your Firmware but I´m not sure if this would work out for everyone.
I´ll see what I can do later and prepare a zip file for you
g.ott said:
hi gorgtech, are you still here?
Click to expand...
Click to collapse
Gorgtech said:
I want to offer you a little fix for those of you who actually experience this problem. On some Samsung based ROMs, some people complain about not working cameras, no matter how often they tried to install a ROM after several wipes. This error may occur in case your camera uses a different firmware.
Most people however won´t experience this error.
I´ve created a little Fix which is actually very easy to apply as a flashable zip. It was intended to be used with my Samsung Galaxy S3 ROM, it may also work with every other Samsung based ROM
Here is the link: Camera Fix for Samsung based ROMs
Simply install this file through your custom recovery
Just in case this patch should not work for everyone, leave me a comment and I´ll see what I can do :angel:
Click to expand...
Click to collapse
about time someone done this! thanks! i thought i corrupted the drivers, but thats for the fix!
Dude, brilliant, this works on KitKat roms also, I have spread the word and linked your thread to the benefit of all.
Thank you
Sent from my GT-I9300
does this really work? can someone add it to aosp code then? @XpLoDWilD @CarbonDev
ayoubij said:
does this really work? can someone add it to aosp code then? @XpLoDWilD @CarbonDev
Click to expand...
Click to collapse
Well it works perfectly for me, but @Moster2 says the md5 checksum is identical to the files already in place, but it works. I'm both happy but mildly confused! If you get the issue it's obviously with trying! You only need to flash the rom to remove it, so it's of no concern to try
Sent from my GT-I9300
metalgearhathaway said:
Well it works perfectly for me, but @Moster2 says the md5 checksum is identical to the files already in place, but it works. I'm both happy but mildly confused! If you get the issue it's obviously with trying! You only need to flash the rom to remove it, so it's of no concern to try
Sent from my GT-I9300
Click to expand...
Click to collapse
I'm wrong, this method went wayward for me in the end :banghead:
Sent from my GT-I9300
metalgearhathaway said:
I'm wrong, this method went wayward for me in the end :banghead:
Sent from my GT-I9300
Click to expand...
Click to collapse
Damn!
Sent from my Linaro SM'd CM11 Galaxy S3, with Archi's kernel. A proud Googy Beta tester.
Well done. Works perfectly.
I tried just about everything I could find regarding fixing the camera in my S3, including manually replacing the Camera2.apk and this is the first fix I tried that actually works. Thanks for putting the time and effort in to solve this annoying problem.

[Q] HTC One Mini 2 Demo Unit, any way to remove demo mode?

Hi Guys!
So I got my hands on an HTC One Mini 2 Demo Unit. Don't ask me how or why. (NOT STOLEN!)
I have tried to get rid of the Demo mode app but without success.
This is what I have done:
Unlocked the bootloader
Flashed TWRP
This is what I have tried to do to get rid of the demo mode:
Wiping and factory reset from TWRP. About 1 minute after the phone has booted it autoinstalls the Demo Mode again. Before it does all functions is available etc, after the demo mode is installed some options and functions is disabled.
Rooted, Installed Xposed and module BootManager to stop Demo Mode from booting, no success the demo app still starts upon boot
Tried to uninstall the app with various root uninstallers, they just fail.
Tried wiping ALL partitions etc from TWRP and restored an original HTC One Mini 2 system dump from another thread, same thing. After about one minute the Demo application autoinstalls itself and some functions is diabled and the annoying demo mode starts now and then, and blinkfeed is full of sh*t, demo contacts etc.
After I reboot all settings etc is restored to it's original state.
Any ideas how I can force the phone not to install the demo mode after reset?
Thanks!
Update: Flashing the Cyanogenmod firmware from another thread does not install the demo mode and the phone works as it should. I can call etc. But I only have 3G not 4G, don't know if it has to do with the sim or not (borrowed a nano-sim from a collegues iPhone 5s).
But anyhow I would like to have the HTC firmware instead, any ideas?
Maybe someone has another system dump/ruu/firmware or any of the sort I can try. Perhaps the firmware I tried in the other thread also was a demo-firmware (http://forum.xda-developers.com/showpost.php?p=55107684&postcount=6)
B3t4 said:
Update: Flashing the Cyanogenmod firmware from another thread does not install the demo mode
Click to expand...
Click to collapse
As you probably figured it was an app in the ROM so installing a custom ROM or reverting back to stock will get rid of the problem (as you've already done it)
yourmate said:
As you probably figured it was an app in the ROM so installing a custom ROM or reverting back to stock will get rid of the problem (as you've already done it)
Click to expand...
Click to collapse
Thank you for your answer. I have however tried to restore the original ROM and another original dump from this forum but the app installs itself anyway. Any idea where I can get another clean ROM or system dump?
B3t4 said:
Thank you for your answer. I have however tried to restore the original ROM and another original dump from this forum but the app installs itself anyway. Any idea where I can get another clean ROM or system dump?
Click to expand...
Click to collapse
I'd unlock it first on htcdev and then root and flash a custom recovery.
Then you'd either flash back to stock or flash a custom ROM.
I hope this helps
yourmate said:
I'd unlock it first on htcdev and then root and flash a custom recovery.
Then you'd either flash back to stock or flash a custom ROM.
I hope this helps
Click to expand...
Click to collapse
As stated in the OP I have already unlocked the bootloader and flashed a custom recovery. CyanogenMod works but very buggy build, and either way I would like to have the original ROM or something close to it (Sense). Unfortunately there are no custom roms for this phone yet (other then CM). I have only found one original TWRP dump that I tried but the demo mode installed itself on that dump as well. I don't know why it installed itself on the original rom from this forum... Thanks
B3t4 said:
As stated in the OP I have already unlocked the bootloader and flashed a custom recovery. CyanogenMod works but very buggy build, and either way I would like to have the original ROM or something close to it (Sense). Unfortunately there are no custom roms for this phone yet (other then CM). I have only found one original TWRP dump that I tried but the demo mode installed itself on that dump as well. I don't know why it installed itself on the original rom from this forum... Thanks
Click to expand...
Click to collapse
Sorry, my bad.
My understanding is that this is an app so if it's not in the ROM then it cannot run.
There are a few other custom ROM but if you want stock follow this by the letter.
yourmate said:
Sorry, my bad.
My understanding is that this is an app so if it's not in the ROM then it cannot run.
There are a few other custom ROM but if you want stock follow this by the letter.
Click to expand...
Click to collapse
Those instructions and ROMs are for the HTC One Mini and not the HTC One Mini 2. Also as far as I know there is no way to get S-OFF on the HTC One Mini 2 yet.
B3t4 said:
Those instructions and ROMs are for the HTC One Mini and not the HTC One Mini 2. Also as far as I know there is no way to get S-OFF on the HTC One Mini 2 yet.
Click to expand...
Click to collapse
Mini 2 works the very same way (obviously with its own ROM)
Do some digging
yourmate said:
Mini 2 works the very same way (obviously with its own ROM)
Do some digging
Click to expand...
Click to collapse
Thanks! I will give it a try, does not matter if I brick it anyways. My fiance dropped it and broke the glass so I will get a new demo unit.
B3t4 said:
Thanks! I will give it a try, does not matter if I brick it anyways. My fiance dropped it and broke the glass so I will get a new demo unit.
Click to expand...
Click to collapse
wow
I've flashed one two weeks ago (although not a demo unit but it was branded) it works OK
Changed several LCDs on Minis but not on Mini 2 yet.
Btw how much are the demo ones?
yourmate said:
wow
I've flashed one two weeks ago (although not a demo unit but it was branded) it works OK
Changed several LCDs on Minis but not on Mini 2 yet.
Btw how much are the demo ones?
Click to expand...
Click to collapse
What ROM/Backup did you use?
For me, free but can't tell the source. :good:
B3t4 said:
What ROM/Backup did you use?
For me, free but can't tell the source. :good:
Click to expand...
Click to collapse
So why don't you send two over and I'll do it and send you one back?
B3t4 said:
For me, free but can't tell the source. :good:
Click to expand...
Click to collapse
yourmate said:
So why don't you send two over and I'll do it and send you one back?
Click to expand...
Click to collapse
I've thought so that the conversation will dry out indeed
yourmate said:
I've thought so that the conversation will dry out indeed
Click to expand...
Click to collapse
Sorry I don't have permission to do that from my source.
I'll try to get some time over and try your suggestion, will get back with results.
did you have any luck removing the demo apps from the demo device, i also stuck with one
dest1 said:
did you have any luck removing the demo apps from the demo device, i also stuck with one
Click to expand...
Click to collapse
Download stock rim flashable via twrp and open it using WinZip or winrar goto system/etc/ and delete '.demo' folder. Then repack and flash, problem solved.
no need for reading the whole thread. in twrp mount preload and by using the twrp file manager navigate to /preload and delete everything you can find inside! do a factory reset and flashing "org" firmware should be done...
hypafly said:
Download stock rim flashable via twrp and open it using WinZip or winrar goto system/etc/ and delete '.demo' folder. Then repack and flash, problem solved.
Click to expand...
Click to collapse
I was going to do same thing, but how do you repack ? I mean I packed it with WinRAR, or 7Zip, but they compress the file, or maybe they don't pack it as TWRP format, so TWRP didn't recognise my file. Simply, how do you pack it ?
Ven99 said:
I was going to do same thing, but how do you repack ? I mean I packed it with WinRAR, or 7Zip, but they compress the file, or maybe they don't pack it as TWRP format, so TWRP didn't recognise my file. Simply, how do you pack it ?
Click to expand...
Click to collapse
Open the zip file that you want to flash with any zip manager you like, you don't need to extract the files, just navigate to the folder and delete the .demo folder and it will automatically repack it. Close it and copy it to your phone and flash normally. It will work.

!OUTDATED! Use Walkerblue's Notexperience ROM!

EDIT : Dont use this, Walker blue has created a better version of the same ROM.here is link
https://forum.xda-developers.com/ga...rom-walkerblue-v1-notexperienceromv3-t3575377
Right on bro, at least everyone will know they can flash @Allooosh98'so N7 port. The options are finally growing ha. A big thanks to @messi2050 for the permissive kernel and TWRP.
Messi2050's kernel will not flash. No WiFi
amt325 said:
Messi2050's kernel will not flash. No WiFi
Click to expand...
Click to collapse
You have to extract the downloaded zip file to get the correct kernel.img file.
My bad. Added to the post that the kernel zip needs to be extracted.
Does WiFi fix work for anyone else? I still can't turn on WiFi. I followed instructions very closely. Thanks again, for working on the J700T
Used all my high speed data using this ROM. The WiFi fix did not work on my phone SM-J700T. Any suggestions?
amt325 said:
Used all my high speed data using this ROM. The WiFi fix did not work on my phone SM-J700T. Any suggestions?
Click to expand...
Click to collapse
Don't know why the WIFI fix is not working, but in case it does not. Here are the instructions on how to do it manually.
Download this View attachment wifi.zip and put it in your exernal SD card.
In TWRP, mount the system ( Mount > Check system ), and then navigate to system/etc/wifi with the file browser ( Advanced > File browser )
Delete all the files in there, and then copy all the files from the zip to the wifi folder.
Reboot. If this does not work please tell me.
Sorry again about that.
Changed instructions in post until I can figure out why the automatic fix is not working.
wifi works now but will the camera bee fixableby transfering the apks of the original like the wifi
Nope, phone still crashes by moving the stock ROM camera app to the ROM.
Closest I've gotten to a working camera was a error "Server error occurred. Restart Camera." By changing out these files from the stock ROM to this ROM :
libcamera_client.so
libcamera_metadata.so
libcameraservice.so
libcameraserive_cameramodule.so
But for some reason changing out just those 4 files causes the phone to lag like crazy.
also one more thing snapchat force reboots aswell u could put that in the bugs
Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi
packydavis said:
Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi
Click to expand...
Click to collapse
--Edit: seems like J700T1 and J700T have the same kernel, so you must of just missed a step. Still trying to figure out how to make the wifi fix just a automatic ZIP that you just flash, busy with school. Tomorrow I will look into it more.--
packydavis said:
Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi
Click to expand...
Click to collapse
The T and T1 have the same wifi files, the phones are identical from the factory minus 3 or 4 apps. The firmwares are interchangeable. You must have missed a step, walk us through your process.
Also any app that has a camera built in reliance is not gonna work, clearly, since the camera isn't working yet.
I fixed my WiFi.
vekenti said:
Nope, phone still crashes by moving the stock ROM camera app to the ROM.
Closest I've gotten to a working camera was a error "Server error occurred. Restart Camera." By changing out these files from the stock ROM to this ROM :
libcamera_client.so
libcamera_metadata.so
libcameraservice.so
libcameraserive_cameramodule.so
But for some reason changing out just those 4 files causes the phone to lag like crazy.
Click to expand...
Click to collapse
oh so it will be a bit before u figure it out and test to get the camera to work
Thank you vekenti. That did the trick with WiFi. It took quite a while to transfer each file on by one. Your instructions were great.
amt325 said:
Thank you vekenti. That did the trick with WiFi. It took quite a while to transfer each file on by one. Your instructions were great.
Click to expand...
Click to collapse
Your welcome yeah it takes a while to move all the files. Still trying to figure out a way to make a flashable TWRP zip to do it automstically.
@vekenti Great rom, fix the faults of camera and wifi please
jhan0720 said:
@vekenti Great rom, fix the faults of camera and wifi please
Click to expand...
Click to collapse
Thank you, also wifi is fixed, follow the instructions in the post.

Correct stock file for Indian Version LLD-AL10

I downloaded and tried flashing this one but got an error at 5%.
LLD-AL00C00B172 (8.0.0.172),LLD-TL10C00B172 (8.0.0.172),LLD-AL10C00B172 (8.0.0.172)
Can someone tell me which version i correct for me?
Does it match your device model? Also what was the last firmware you had on the device?
Sent from my LLD-L31 using Tapatalk
I don't remember the last firmware but the device is LLD-AL10
I file I tried was the latest I could find on the website. I just tried another file, got the same error.
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
hacktrix2006 said:
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
Click to expand...
Click to collapse
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Manish54 said:
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Click to expand...
Click to collapse
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
hacktrix2006 said:
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
Click to expand...
Click to collapse
which method did you use to flash it?
Search the forum for this phone there be a guide to unblock phone.
Sent from my LLD-L31 using Tapatalk
@Manish54 How did it go, did them links help you resolve your issue?
hacktrix2006 said:
@Manish54 How did it go, did them links help you resolve your issue?
Click to expand...
Click to collapse
Holy ****! this worked with HuR tool. But the only problem is, its a chinese ROM, without play store. If you tell me what those 3 files were, i'll download the Indian version and flash it. Thanks a lot though
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
hacktrix2006 said:
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
Click to expand...
Click to collapse
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
IS Wifi working in this new ROM?
rsverma333 said:
IS Wifi working in this new ROM?
Click to expand...
Click to collapse
Yes flashing stock rom with HuR fixed everything.
Manish54 said:
Yes flashing stock rom with HuR fixed everything.
Click to expand...
Click to collapse
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
which custom rom do u flashed & is volte on it ?
rsverma333 said:
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Click to expand...
Click to collapse
There is no play store on that Chinese rom, either flash a different stock rom or a custom rom.
VisHnu Raveendran said:
which custom rom do u flashed & is volte on it ?
Click to expand...
Click to collapse
Havoc. And no.
Manish54 said:
Havoc. And no.
Click to expand...
Click to collapse
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
rsverma333 said:
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
Click to expand...
Click to collapse
Did you follow the instructions property? Coz it's working for me.

Categories

Resources