Related
Hi,
I managed to install B609 over a Vodafone (Romania) cust firmware. Before i installed B609 from B133 with some errors: Huawei_Cust_Failed etc, Defect reminder raport was present in Notifications, Motion Control did not work
Latest version from Vodafone Romania was B129 with some bugs and battery drain verry fast; memory load for standbay was aprox 70% etc
I have fund a easy metod to update to full version of B609 without errors, huawei_cust_failed, and surprise Motion Control is working
Please follow this steps:
1. Update to B133 by Local Update -> dload -> update.app (Download form here)
2. Flash this Update to modify your Cust Version and then you cand flash a stock firmware without problems (Local Update -> dload -> update.app) (Download form here)
3. Update now to B609 (full version) by Local Update (Local Update -> dload -> update.app) (Download form here)
*3: ATENTION: do NOT try upgrade to B609 if u dont have at least B133!!!
4. After update please check if Motion Control is working and perform a Factory Reset
5. Enjoy!
PS: if you are already to B609 and you have that errors (cust failed, motion control, etc) you must rollback/downgrade to B133
For this, you must make a backup for data, format card, create a dload folder, copy inside the update.app from pct 1
Force update by power off the phone, and keep press Vol Buttons (both) and Power until you see the Recovery menu
Or follow http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277/page2
PS2: if you whant to go back to you Vodafone orginal Firmware, please search for Hungary Huawei support and download B129 from there or u can try here
How to root B609?
migueli2 said:
How to root B609?
Click to expand...
Click to collapse
Translate from Huaweiblog:
http://www.huaweiblog.de/firmware/root-fuer-emui-3-0-auf-dem-ascend-p7/
Sent from my HUAWEI P7-L10 using XDA Premium HD app
migueli2 said:
How to root B609?
Click to expand...
Click to collapse
http://forum.xda-developers.com/asc...p7-l10-609-t3003605/post58191974#post58191974
majcomtech said:
http://forum.xda-developers.com/asc...p7-l10-609-t3003605/post58191974#post58191974
Click to expand...
Click to collapse
I'm guessing that's a tutorial for advanced users?
And still don't know how to do it.
Gaugen good job .Thank you
Update from B135 Israel
gaugen said:
Hi,
I managed to install B609 over a Vodafone (Romania) cust firmware. Before i installed B609 from B133 with some errors: Huawei_Cust_Failed etc, Defect reminder raport was present in Notifications, Motion Control did not work
Latest version from Vodafone Romania was B129 with some bugs and battery drain verry fast; memory load for standbay was aprox 70% etc
I have fund a easy metod to update to full version of B609 without errors, huawei_cust_failed, and surprise Motion Control is working
Please follow this steps:
1. Update to B133 by Local Update -> dload -> update.app (Download form here)
2. Flash this Update to modify your Cust Version and then you cand flash a stock firmware without problems (Local Update -> dload -> update.app) (Download form here)
3. Update now to B609 (full version) by Local Update (Local Update -> dload -> update.app) (Download form here)
*3: ATENTION: do NOT try upgrade to B609 if u dont have at least B133!!!
4. After update please check if Motion Control is working and perform a Factory Reset
5. Enjoy!
PS: if you are already to B609 and you have that errors (cust failed, motion control, etc) you must rollback/downgrade to B133
For this, you must make a backup for data, format card, create a dload folder, copy inside the update.app from pct 1
Force update by power off the phone, and keep press Vol Buttons (both) and Power until you see the Recovery menu
Or follow http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277/page2
PS2: if you whant to go back to you Vodafone orginal Firmware, please search for Hungary Huawei support and download B129 from there or u can try here
Click to expand...
Click to collapse
Please tell me, if I'm on B135 Israel can I go from step 2 or should I downgrade to B133 and follow the guide from the first step ?
BTW, the link posted on step 1 is death.
Thanks
I'm on VDF RO and already have B609 with the above mentioned bugs except the motion control which I fixed it by copying hw_motion_config.xml to /data/cust/xml.
Anyway, will your version work if I update it over my B609?
if u have a custom room (brand versionof android from vodafone, telekom etc) please follow this steps. maybe for a phone who doesen`t have a cust room from an operator will work without stepts 1 and 2 but i don`t guarantee
first u must roll back to B133 (stept 1), and flash the Cust Version from step 2. that cust version from step 2 allow u to flash B609 without errors.
Will a simple flash of B133 over B609 do the trick (rollback)?
le: sorry, didn't pay much attention to what you wrote in "PS"... Still, will a force update work?
The B133 link is down Can I use any B133, or does it have to be a special one?
Wait a minute. The CUST fix does a factory reset? It might be valuable information to some... what is worse is that it completely erases the internal memory. Including photos and everything else (my Xiaomi Mi3 doesn't do that, my Galaxy Nexus doesn't...). I did a Titanium Backup before doing the updates, but didn't move all the files to the PC (same with photos). Now everything is gone.
Thank you, Huawei! There was no warning, nowhere, that this would happen, and it is not normal behavior for Android... (from my experience at least).
kadajawi said:
The B133 link is down Can I use any B133, or does it have to be a special one?
Click to expand...
Click to collapse
Update the link pls
Where to download B133 (tested and working version, i don't want to brick my phone)?
What exactly is this update you used in step 2? The update.app is just about 18K und if I open with huwei update extractor I see no cust.img. There are only crc.img, curver.img, efi.img, md5rsa.img, vendor.img and verlist.img.
Where is that file from and what does it?
Greetings
migueli2 said:
I'm guessing that's a tutorial for advanced users?
And still don't know how to do it.
Click to expand...
Click to collapse
Have you unlocked your bootloader yet?
Basically I've followed a few different methods and got it to work.
Using the firmware finder apk I downloaded the B182 (full) rom.
While this is downloading... Using es Explorer or similar create a folder called hwff in the root of your main storage.
When it has finished downloading...
Check the md5.
Unpack it.
Move to dload.
Then turn it off.
Turn back on using the 3 finger method.
This will then install B182.
Note: when it reboots it will stay on the Huawei red logo for a few minutes.
Let it finish and you will have B182 working.
***********
Now to update to B361.
I used the combination of Huawei updater 2.0 and HiSense to update.
It found it with no issues and I just left it to update.
**********
Update to B378-FULL
This was simply an OTA update through the normal Settings > Update menu.
Fairly painless, just time consuming really.
Sent from my EVA-L09 using Tapatalk
Man the update path on these huawei's is killing me. I've only just taken the plunge. Accidentally turned my c432 into a c900 by double flashing a b166 rom. Took me best part of a day to get it back to c432b166!
The amount of slow crappy downloads we have to make in order to make incremental upgrades. Is there not a way that we can just go straight into a later build without all these rollups?
You can just use the proxy install method within the Firmware Finder app, its very easy.
Just google "how to. using firmware finder youtube" as I cant post direct link, then 99% of the work is done for you
Hutchism: Sadly not, from what I've seen you can only jump to Nougat from B182 and nothing earlier - Don't ask me why... Makes NO sense!
Natchi: The proxy install method did not work for me. That's why I did it the way I did... All I know is that it worked and I'm running Nougat.
BigDaddyBlue said:
***********
Now to update to B361.
I used the combination of Huawei updater 2.0 and HiSense to update.
It found it with no issues and I just left it to update.
**********
Click to expand...
Click to collapse
Hi there, followed your first step with no issues - finally on B182! Struggling to find the B361 update using Hisuite (windows PC), HiCare (app) or the Update app.
Any advice on how to do this? What is Updater 2.0 please?
Thanks very much!
Sam
Hi Sam,
You can find the updater here;
https://forum.xda-developers.com/p9/development/huawei-p9-p9-plus-firmware-updater-t3435873
Thanks,
Jay.
hi guys, ive searched this forum day and night, maybe i'm not that good or somehow im to stupid.
so, i'm using p9-eval09 with c432b182. a few months ago i dont know how, im surprised as well, i rooted this phone with twrp and supersu. thing is when it came up to create a back-up dont know what didnt work and down the stream my back`up went. now i want to go back to stock as i will have warranty issues cause im not happy of the battery life. in order to do that, i have to get back to stock rom and stock recovery. will any of you guys will be nice enough to give me a hand with this? help would be much appreciated and ill buy you some beers and give you free unicorn rides. god bless
Rollback to Stock Huawei P9- Eval 09 C432 & update to EMUI 5.0
thisshouldbenice said:
hi guys, ive searched this forum day and night, maybe i'm not that good or somehow im to stupid.
so, i'm using p9-eval09 with c432b182. a few months ago i dont know how, im surprised as well, i rooted this phone with twrp and supersu. thing is when it came up to create a back-up dont know what didnt work and down the stream my back`up went. now i want to go back to stock as i will have warranty issues cause im not happy of the battery life. in order to do that, i have to get back to stock rom and stock recovery. will any of you guys will be nice enough to give me a hand with this? help would be much appreciated and ill buy you some beers and give you free unicorn rides. god bless
Click to expand...
Click to collapse
Hi,
You can use this link to download the rollback package
http://download-c.huawei.com/download/downloadCenter?downloadId=91623&version=357533&siteCode=se
once you download it.
unzip and put the update.app in the dload folder on your external sdcard in your phone.
you have to manually create this folder in your external sdcard.
once you do this
type
*#*#2846579#*#* in your phone dialer
then you will get a menu
in that select
SD card upgrade
then you wait.
it will reboot and finish rolling back to stock.
Remember this will get you back to stock rom, but you will have to upgrade to some other ROM for your L09 after rolling back.
I do not have Huawei P9 but I have Huawei Mate 8 & Huawei Mediapad M3. I feel that there are lot of similarities between Huawei phones & that is why I feel you can make it work using these steps.
Hope this solves your problem.
For updating to EMUI 5.0
you can use firmware finder from play store.
Install the app
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
in the settings of this firmware finder app
switch on "add on proxy"
now go to your WIFI-settings
tap and hold your WIFI connection
modify network - select manual
there you put the following
proxy is
localhost
port is
8080
that's it save.
then go to firmware finder app
search
download the right firmware for your P9 L09 and then click on "send the firmware to updater"
now
go to settings
update -> you should see the OTA for EMUI 5.0
But don't this now. First you have to rollback and only after that go for this EMUI 5.0 update.
Don't forget. Please click on :good::good::good::good::good::good::good::good:
it wont let me get the rom installed, do u know where i can find a stock rom?
so i found this on that site u've posted in another thread. surprisingly they have the stock rom for HUAWEI P9 FIRMWARE(EVA-L09, ANDROID 6.0, EMUI 4.1.1, C432B182, WESTERN EUROPE)
http:// consumer.huawei. com/it/support/mobile-phones/p9_it-sup.htm (fix the space's inside the link, as im a new user i cant post links)
stock rom B182
thisshouldbenice said:
it wont let me get the rom installed, do u know where i can find a stock rom?
so i found this on that site u've posted in another thread. surprisingly they have the stock rom for HUAWEI P9 FIRMWARE(EVA-L09, ANDROID 6.0, EMUI 4.1.1, C432B182, WESTERN EUROPE)
http:// consumer.huawei. com/it/support/mobile-phones/p9_it-sup.htm (fix the space's inside the link, as im a new user i cant post links)
Click to expand...
Click to collapse
L09C432B182 FULL firmware file. Found it in another thread. It seems to be working for them.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v63880/f1/full/update.zip
:good::good:
Did it with that link i tried to post. So what i did was just force flash with dload on my sdcard using that original rom. Thx for the help!
Cannot update from EVA-L09C432B182 to Nougat
Can anyone please help. I'm going round in circles, following guide after guide.
I'm currently running a P9 L09, running EVA-L09C432B182, after rollback
PHONE Unlocked
FRP Unlock
Factory Recovery
I've tried the firmware finder, confirming firmware ok with IMEI. My version for some reason does not have the "send the firmware to updater", and I have configured the proxy, and installed the proxy. I've tried unzipping the downloaded update.zip by firmware finder, and dropping it into the dload folder.
It seems every version I try, its fails at 5%. What am I doing wrong.
Can anyone tell me a system that works to get back to the latest stock nougat.
sjhannan said:
Can anyone please help. I'm going round in circles, following guide after guide.
I'm currently running a P9 L09, running EVA-L09C432B182, after rollback
PHONE Unlocked
FRP Unlock
Factory Recovery
I've tried the firmware finder, confirming firmware ok with IMEI. My version for some reason does not have the "send the firmware to updater", and I have configured the proxy, and installed the proxy. I've tried unzipping the downloaded update.zip by firmware finder, and dropping it into the dload folder.
It seems every version I try, its fails at 5%. What am I doing wrong.
Can anyone tell me a system that works to get back to the latest stock nougat.
Click to expand...
Click to collapse
Have you tried their consumer site? Just download the original, i did so, and the rest will come OTA.
Hi,
I got the B386 OTA update today and after installing my P9 EVA-L09C432 flashes "no service" in the status bar and a sim card symbol with exclamation mark is shown.
I tried removing and putting sim card back without success. Interesting is that when I restart the phone, after singing in for some seconds I can see the correct network operator in the status bar, before it changes to no service.
Under about phone the field IMEI shows Unknown, and Status does not open. So it looks like it doesn't read my sim card...
Any ideas what to try?
Thanks
Many reports on this! Rollback to MM, only way to solve it. Next time hit the 3 dots on the update page and Download the full package!
thanks, will give it a try
I had the exact same issue, a factory reset + dalvic cache wipe fixed it for me.
Didn't work for me. Had to rollback to B182. Going back to B360 didn't help.
How do I download the full package? Option is not available.
Downgrade to b300 and then flash b136 do it wipe data/system and cache in stock recovery
same trouble here, how can i fix it? wipe everything does not work for me
Rollback to B300, then install B182. You should get B383 offered as OTA. Install. After that it worked for me going to B386 with OTA update. No problems since.
theFloe said:
Rollback to B300, then install B182. You should get B383 offered as OTA. Install. After that it worked for me going to B386 with OTA update. No problems since.
Click to expand...
Click to collapse
And how can I rollback to b300?
Can I install from b386 the b383 or I must go to b300 ?
MartinDimchev said:
Many reports on this! Rollback to MM, only way to solve it. Next time hit the 3 dots on the update page and Download the full package!
Click to expand...
Click to collapse
No bugs with Full Update, 386 working for me
theFloe said:
Rollback to B300, then install B182. You should get B383 offered as OTA. Install. After that it worked for me going to B386 with OTA update. No problems since.
Click to expand...
Click to collapse
Any updates after that? I have re-branded EVA-AL10 to EVA-L19C432 and latest I have is 386. There are no more updates. Have you find the way how to update higher then 386? No of existing methods works...
Always get authentication error or update failed.
gkirko said:
Any updates after that? I have re-branded EVA-AL10 to EVA-L19C432 and latest I have is 386. There are no more updates. Have you find the way how to update higher then 386? No of existing methods works...
Always get authentication error or update failed.
Click to expand...
Click to collapse
HWOTA method must work if you have properly rebranded to L19c432
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Hi all. I have huawei p9 eva l19 and after rollback to mm any theme won`t apply. I have eva l19c432b182 and everything works fine but just theme won`t, it says applied but nothing. I have old emui icons for stock apps like camera, gallery...
I have locked bootloader and nonrooted device, stock recovery too.
Can anyone help me?
Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset
zgfg said:
Install b182 again by DLOAD and then 'dial'
*#*#2846579#*#* and apply Hard Reset
Click to expand...
Click to collapse
Thank you for answer. When i flashed b182 update(dload method) after that phone did factory reset, and after that power on.
Do i need to factory reset again? When i installed b182 in my folder dload was only update.app(3.22gb), do i need to have other files in dload folder or just update.app? i missing stock apps like compass, mirror... Maybe i need to flash some data files but i don`t know how without root or bootloader, and i would like to not root my device. What to do?
Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443
zgfg said:
Here is an excellent guide for Rollback, I followed two times and everything worked perfect. However, skip 7-8 there is no such package and for 9 you should receive OTAs b383, b386 and b393 (some also get b393)
https://forum.xda-developers.com/p9...-81-emui-5-t3612258/post73131443#post73131443
Click to expand...
Click to collapse
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?
Kovacc56 said:
Hmm i followed just like that and i have update now to b383 but i won`t bcs i wanted mm. Weird, i found on forum that i need to flash hw_init with srk tool if i miss themes but that need a root. Hw_init is file from update_data_full_hw_eu(Step 7-8) but i don`t know how to flash it in dload bcs there have only files in zip not update.app.I think i can`t flash zip file in dload. I searched that zip (hw_eu) and i found hw_init file and also my missing apps like compass. How to flash this zip without root?
Click to expand...
Click to collapse
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
zgfg said:
I didn't stay in b182 but I think no apps were missing
Anyway, you can follow but for b182 package
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
Click to expand...
Click to collapse
Ye i remember i followed that instructions, first is for stock recovery and i have it and second is for stock firmware, i downloaded that l19 b182 from that link in his guide. I think i will have themes when i update my phone to b383, i have update in `about phone` but i like mm more... But don`t know how to solve my problem now with mm... Maybe u missed that apps too but u didn`t notice it, rly don`t know. Do anyone else know what do do?