Related
DOES ANY KNOW HOW TO PUT THIS DEVICE ON DIAG MODE.
CHECKED Settings - Wireless Networks - Click to Dialup Networking THIS OPTION IS NOT THERE, ALSO Diag/Testing Mode
*#4636*1111# DOES NOT WORK..
try **usbui on the dialer, it works for fascinate so it's worth a shot
I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...
hesantos83 said:
I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...
Click to expand...
Click to collapse
do you have a link to the dialer?
this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..
hesantos83 said:
this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..
Click to expand...
Click to collapse
a little help please, I did what you said and it all worked, but how do you access the dialer? I only get an error message that says "cannot make or take a call using Galaxy tab"
Uh even easier method to enter diag.
Go to to notes, In the search type
**usbui [**87284]
Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
me too having the same problem
and I'm so tired from searching for the stock firmware
xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
HA4ever said:
me too having the same problem
and I'm so tired from searching for the stock firmware
Click to expand...
Click to collapse
Guys, check out Alldroid in their galaxy tab forum they have a get back to stock post with the verizon firmware.
i800
please!can me more about search metod
if you can lay out a picture about search metod **87284 please!
big big thanks
PAULC91316 said:
Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.
Click to expand...
Click to collapse
Use default samsung
It work I have used it
hi...
can anyone tell me the command to leave diag-mode IN QPST/QXDM...
not the dialer...
would be really great...
got her done
i installed kies for the drivers did the downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it then make sure UART AND USB have the modem select it and that's it. that should let you see it on the diag port open cdma workshop used the samsung default password changed prl and mdn min and evdo settings
im on an android plan which automatically gets your web rolling
the evdo changed on me twice but i just put it back and it stuck
i couldnt get the notepad i dont know where its at to do the **usbui but this was cool thanks for all the help i take no credit for this i just read these forums and im just repeating what i read on here thanks for all the help
in memo type ##8778#
work!)))
Anyone get this tablet working on Cricket or MetroPCS yet?
ncat.hq said:
in memo type ##8778#
work!)))
Click to expand...
Click to collapse
When i type ##8778#, there is nothing !
Please help me, my tab is Verizon galaxy tab
Hi all, Please excuse my English, I tried to do the flash in my sch-I800
verizon.Not good, because now it appears the logo of Samsung
tab.Can I do right? To work again? Thank you very much
qualcomm
Hi guys,
Thanks for the useful hints about the diagnostic interface.
Is there a Qualcomm chip in your Galaxy Tab, since you can use the QXDM interface? In my case there appears an unrecognized "7 CDCs" device.
I applied your descriptions also to the Galaxy S+ (Qualcomm chip) and could open a QXDM connection. Unfortunately the device doesn't answer.
Thanks,
eidelen
Not sure if this has been posted before, but for reference, here's two lovely commands for your Revo4g.
Please note! Not all of the commands in the menus are safe-- in fact, just plain ol assume that these menus can totally mess up your phone in a way not even LG understands.
If you don't know what you're doing, don't mess with them!
With that said, here they are.
Open the dialer, and dial:
VZW Hidden Menu
##program910
Click to expand...
Click to collapse
LG Hidden Menu
##lgservicemenu
Click to expand...
Click to collapse
When prompted for a code, just enter zeroes until the dialogue box goes away. I didn't count how many...
I still need to finish analyzing the apps, but it looks like one could possibly enable some 'features' (*cough* tethering) if one pressed buttons in the correct order leading to a DUN MIP change
Good luck! Don't brick your device!
in LG Hideen Menu>data
there is Enable "Admin Data".....what could that be?
EDIT: Just a thought, does this have anything to do with the "Device Admin Settings" shortcut you can add with a long press on a homescreen?
nick99wj said:
in LG Hideen Menu>data
there is Enable "Admin Data".....what could that be?
EDIT: Just a thought, does this have anything to do with the "Device Admin Settings" shortcut you can add with a long press on a homescreen?
Click to expand...
Click to collapse
nope, not at all.
It is a modem preference, I'm still investigating what it does...
thecubed said:
Not sure if this has been posted before, but for reference, here's two lovely commands for your Revo4g.
Please note! Not all of the commands in the menus are safe-- in fact, just plain ol assume that these menus can totally mess up your phone in a way not even LG understands.
If you don't know what you're doing, don't mess with them!
With that said, here they are.
Open the dialer, and dial:
When prompted for a code, just enter zeroes until the dialogue box goes away. I didn't count how many...
I still need to finish analyzing the apps, but it looks like one could possibly enable some 'features' (*cough* tethering) if one pressed buttons in the correct order leading to a DUN MIP change
Good luck! Don't brick your device!
Click to expand...
Click to collapse
You can actually set a shortcut to these in either launcher pro or adw I seem to recall. That will give you easy access to the features.
Sent from my VS910 4G using XDA App
Would any of these codes help with the bluetooth connection issue with version 3?
so does anyone know what we need to press for tetherimg?
LG Revolution hidden menu's
Anyone know how to open the puk menu on the LG Revolution?
Sounds like it's time for some IRC collaboration to figure out what all these fun little options do.
Any clue on how to open puk menu?
I actually wrote a blog post about the ordeal I went through all because Verizon decided to disable secret codes like the *#0*# that people can use to check things like sensors. WTF Verizon? I also wrote on how to fix it once rooted. I can now use secret codes but one thing I noticed is that when I get into the sensors menu and I want to go back to touchwhiz desktop, it doesn't go, it takes a while of pressing home or back buttons.
http://www.techlivewire.com/5284/enable-secret-menu-in-verizon-galaxy-s5.html
Are you looking for the stock one? I'm currently busy but if you don't work it out or somebody posts it before I check back on this I'll see what i can do for ya
caballon said:
Click to expand...
Click to collapse
Look here: http://www.theandroidsoul.com/lg-g6-apps-apk-download/
Yeap, looking stock reset phone now forced closed on me.
Sent from my iPad using Tapatalk
caballon said:
Yeap, looking stock reset phone now forced closed on me.
Click to expand...
Click to collapse
Check my post above your last. It links to a site that says it has the system apps for this phone
Ken C said:
Check my post above your last. It links to a site that says it has the system apps for this phone
Click to expand...
Click to collapse
Yes but don't install don't know why
Ken C said:
Are you looking for the stock one? I'm currently busy but if you don't work it out or somebody posts it before I check back on this I'll see what i can do for ya
Click to expand...
Click to collapse
Reset phone twice lg up and uppercut and nothing still forced closed.
Ken C said:
Are you looking for the stock one? I'm currently busy but if you don't work it out or somebody posts it before I check back on this I'll see what i can do for ya
Click to expand...
Click to collapse
Reset phone twice lg up and uppercut and nothing still forced closed.
I've not used lgup or uppercut to that extent. have you tried installing through ADB or replacing it with the google dialer?
Ken C said:
I've not used lgup or uppercut to that extent. have you tried installing through ADB or replacing it with the google dialer?
Click to expand...
Click to collapse
Can you help with and install that app with adb, I don't know how to do it.
Not the same device and somebody else may have a better source but these guys gave me some info I wasn't aware of (plus is the first one I could come up with
://forum.xda-developers.com/google-nexus-5/general/noob-read-adb-fastboot-how-hep-t2807273
I pulled the phone app off mine and replaced it with drupe to set if there was lost functionality. So far works pretty well, like the app had never used it before. I think my wife has the straight Google dialer for nougat on her n5, up pull it off there and give it a run. I never really used those other features so they never meant anything to me just duplication. If I want to message I message etc..
Teu downloading that file and the program win - zip says it will open those files. Haven't gotten inside it yet myself but I would think that being a regular apk if it is still slow you to install it the normal way
I had the same problem, AT&T is my carrier. I had to insert a T-Mobile SIM, open the contacts app and hot swap the SIM back to AT&T, at which point the phone rebooted and all was well.
There is probably another way to do this, as it seems to be related to video calling.
I Uninstalled my lg dailer to see if I could duplicate the issue. Got rid of that app and replaced it with drupe. Really like the way that app works but it seems that you can't use the dailer codes to access the hidden service menu without it. I don't use the video value so that means nothing to me, but those codes could be useful.
I've got a tgz file that I sent you but can't seem to open it up to extract that apk.
All you did was switch out SIM cards? That sounds odd to me, but I did notice that once the call is placed the LG dealer /call interface shows up but as soon s you end the call away goes the dialer
You know what all ths phone dialer exist in? I searched. For phone.apk found nothing?
you can take it by yourseld...extract the kdz of you model smartphone take the system img and open it with ext2explore, then explore the system image save it on you computer explore system image saved and take all your apk you need..save in your microsd and install..
Hi all,
Living in an area scarcely covered with 4G, I've always used *#*#4636#*#* menu to set LTE only mode on my two previous phones.
But, apparently, on my P30 Pro this menu is locked by manufacturer. I can't access it and if launched from 3rd party apps, get an error message telling me this functionality is disabled.
Does anyone have any idea if it's possible to unlock this menu?
Thanks in advance
Check that thread
https://forum.xda-developers.com/mate-10/how-to/force-4g-option-root-emui-9-t3887486/amp/
oslo83 said:
Check that thread
https://forum.xda-developers.com/mate-10/how-to/force-4g-option-root-emui-9-t3887486/amp/
Click to expand...
Click to collapse
Thanks!
Will check it
oslo83 said:
Check that thread
https://forum.xda-developers.com/mate-10/how-to/force-4g-option-root-emui-9-t3887486/amp/
Click to expand...
Click to collapse
This did show all the settings, but when I tap to select, it selects the one that was set before selection, so doesn't really work
So, what I've found out, is the following - the value 11 (which corresponds to LTE only), doesn't display this option after restart, even when you put "11,9,6,2,1" instead of "9,6,2,1", and the value 12 (which corresponds to LTE/WCDMA) does appear after restart, but doesn't let you select it and falls back to GSM/WCDMA/LTE...
Only possible solution is to leave the field empty or put "-1" and select LTE only, which you can select, but even in this case you can't select LTE/WCDMA.
Thanks for the help!