Still have stock recovery after flashing twrp on eqe2 firmware (latest) - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!

scoogots said:
Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
Click to expand...
Click to collapse
TWRP Recovery might be Released within a few months for this base, now if you can downgrade to epj2 then do it and redo the twrp if you cant then try to downgrade to 5.1.1 and then upgrade to epj2

I'm on the same build but I'm able to install TWRP and it works. I can even install different versions of TWRP. The problem I have after is no matter what ROM I try to flash after I get either error 7, error 6, or errors about the zip file. When I try to Odin it just crashes. I wonder if this build is more secure than others?

scoogots said:
Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Are you unchecking Auto reboot befour flashing twrp?...pulling the battery and booting directly into recovery to make it stick?

Related

Kernel Panic or Battery

Same post from Odin-1 click thread:
Ok so I tried to install using odin 1.7 with the june factory from sam's firmware from here...
http://www.multiupload.com/MGEJ5CZLWC
after one-click failing on numerous occasions.
1.7 appeared to almost work but I now get a kernel failure upload mode message as it reboots after the ATT logo.
I even tried 1.3 and pretty much the same thing happens. When I use just odin-1 click i don't get the kernel failure but i get a battery image with the circle loader that stops at the 12 o'clock position.
1.7 1og
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
If I use 1-click again I always go back to ATT logo then battery indicator that stops at 12 position. So its either this or kernel error with the 1.7.
I am confused as to what my next step should be. I am also using the home-made jig on a consistent basis.
Well I seemed to have fixed the issue for now by installing I897UCJH3 package with odin 1.7...The Rom is working shotty but at least it still got me back in...who would have thought. I still need to go back to a prior ROM setting to upgrade to developer ROMs but its nice that I was able to resolve this issue for now.

[Q] Help flashing stock ATT image. (Resolved, Disegard)

This is resolved (I simply pulled battery, and tried again.)
Hello,
Quick backstory. Prior to the last OTA from ATT I could actually get, I had used towerlroot and everything worked fine. I then updated and lost root(naturally). Now I could not get my S5 to OTA to the most recent update (currently running G900AUCU2ANG3) and tried to use ODIN to flash the original Stock firmware. This process failed. Any suggestions on how I can start over?
Edit to add:It is soft bricked now. Can only load into the "Kies" recovery screen
Here is ODIN output: <ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Leon

Logo Hangs

So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Sonicboom9004 said:
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Click to expand...
Click to collapse
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
xmayhemreturnsx said:
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
I've downloaded the T-mobile 5.1.1 version because I have not found a MetroPCS version. I hope that is the version I had before.
I downloaded it from here: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387 (the first link)
EDIT: Currently going to try this out. I'll let you know if it works or not: http://forum.xda-developers.com/tmo...x-recovery-seandroid-enforcing-error-t3144011
EDIT 2: Doesn't work it just says md5 file invalid. Binary Check Failed.
EDIT 3: FIXED MY PHONE I just used the latest version of 5.1.1. Thanks for pointing me in the right direction xmayhemreturnsx. Link for the latest version for anyone else who needs help:http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001

Odin fail

Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Great.
A littlr more information would help us help you.
Which version of Odin, what is failing, what if any messages are Odin or the device giving you?
kvadde said:
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Click to expand...
Click to collapse
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
The only reason why you would get issues flashing a stock firmware with odin is if the firmware isn't intended for your device.
Odin is quite smart and can prevent you from bricking your device.
I try to flash this one T810XXU1BOH7_T810XAR1BOH7_HOME.tar, Now i have flash custom rom so my tab si working but cant flash to stock rom.
Sorry my bad english :/
lakingslayer said:
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you its work
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
One more with problems when having CM. Try flashing TW ROM and then run Odin with stock firmware. BTW why ur odin is not checking MD5? What file did you download?
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
hidden.img
recovery.img
sboot.bin
system.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select repartition when flashing stock rom.

Samsung SM-T377P stuck in factory mode/can't flash (Fused 3/Binary 2)

Hey Everyone,
New to this, so excuse my ignorance, but I was attempting to remove the FRP lock from a tablet E (SM-T377P) I purchased from a few from a company that used them.. Flashed it with stock firmware thinking it would just remove the lock (again, new) and clearly that isn't the case. Did some searching and found some firmware on here that actually put 5.1.1 and since I wasn't thinking, flashed that version on the tablet with odin 3.14. Device now only goes into factory mode and I cannot flash with either the combination file or stock firmware for 6 or 7, getting error Fused 3/Binary 2). Not really sure where to go from here, if anywhere, if there is anyone that could offer any help that would be great. (Not new to computers or tech, so I am pretty literate with any questions).
Odin Error is...
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 2360 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Still looking for some help, thanks!
Update: Was able to find a fix and its working now!

Categories

Resources