Database Develop

[SOLVED] Stuck in "warning bootloader unlocked" screen. Device won't turn OFF.

[SOLVED] Stuck in "warning bootloader unlocked" screen. Device won't turn OFF.
Hi all,
I have a Moto G 2014 (Titan, XT1068).
I am not new to custom ROM-ing and Android hacking, had all 4 of my personal Android phones unlocked and rooted just fine - I usually know what I'm doing.
This here is my mom's phone and it's the first Moto G 2014 I attempted to unlock & root so far. I know the basics, but this particular device gives me headache...
All actions were performed on 07. October 2016 after carefully researching the latest HOW-TOs for the Moto G 2014 on XDA and other websites:
- I unlocked the bootloader using the official process from Motorola to receive the "unique key".
- I installed twrp-3.0.2-3-titan.img recovery.
- I downloaded SR1-SuperSU-v2.78-SR1-20160915123031.zip and placed it on storage.
- I booted into TWRP recovery, installed SuperSU and Wiped Dalvik+Cache, then rebooted.
Since then, I am stuck in the "warning bootloader unlocked" (WBU) screen and the device won't turn off.
If I press the power button and hold it for a few seconds, normally it turned the device off, but now it just reboots into the WBU screen, looping forever.
- I can still enter my fastboot by holding VOL-down + Power, get a adb connection with my Android SDK + platform tools on my Windows and issue adb and fastboot commands normally.
- I can still enter the recovery and do stuff with it normally.
Since this incident, I have also tried a normal Wipe (whatever the default wipe settings are) in TWRP, no change / effect.
I have no clue what to do next, other than wait for the battery to go empty that is, since I can't even turn the device off.
Some methodologically sound advice would be highly appreciated at this point. :good:
Thank you in advance.

You just can't flash the supersu file in twrp before flashing the supersu you need to flash roo.M.br.zip file in fastboot mode then you can flash the SuperSU.
The file available at stock firmware section.
---------- Post added at 09:48 AM ---------- Previous post was at 09:46 AM ----------
Flash the stock rom from fastboot mode then again root the device as i said it will solve the problem.

Prasourabha said:
You just can't flash the supersu file in twrp before flashing the supersu you need to flash roo.M.br.zip file in fastboot mode then you can flash the SuperSU.
The file available at stock firmware section.
---------- Post added at 09:48 AM ---------- Previous post was at 09:46 AM ----------
Flash the stock rom from fastboot mode then again root the device as i said it will solve the problem.
Click to expand...
Click to collapse
Is this roo.M.br.zip file included in the Stock Rom or is it the Stock Rom itself?
Or is there another general name for this roo.M.br.zip? Because I can't find it via the search function of the forum.
Anyhow ... in the meantime I will be downloading XT1068_TITAN_RETAILDSDS_5.0.2_LXB22.99-16.3_Easy_Installer.zip which is linked on the following thread:
- http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
- first URL for XT1068 labeled as "***NEW*** DOWNLOAD XT1068 5.0.2 LXB22.99-16.3 RETDSDS WITH STAGE FRIGHT FIX RETAIL DUAL SIM DUAL STANDBY (EU/INDIAN/GLOBAL) 26/08/2015 BUILD ***NEW***"
But I already had a look into the archive, nowhere to find a roo.M.br.zip is even similarly named file(s).
Could you be a little more specific or provide the correct XDA thread / link?
Also, the fact that "I can't just flash SU" it must be device specific, right?
Because on my other Android phones I just installed/flashed SU via recovery mod with no problems and that was it.
EDIT: also, according to this guide here, apparently you "can just install SU", if I understand correctly and it's more or less exactly how I proceeded (unless wiping cache/dalvik after flash was harmful):
- http://forum.xda-developers.com/moto-g-2014/general/guide-root-moto-g-2nd-gen-2014-t2874245

Here is the link of the page where yiu can find the file and the rooting guide
http://forum.xda-developers.com/moto-g-2014/general/root-root-moto-g-2014-android-t3255711

Prasourabha said:
Here is the link of the page where yiu can find the file and the rooting guide
http://forum.xda-developers.com/moto-g-2014/general/root-root-moto-g-2014-android-t3255711
Click to expand...
Click to collapse
Sorry for not understanding your answer at first.
Obviously you were refering to two different things in one post and I was a little confused.
- RESTORING THE STOCK-ROM BASED ON MARSHMALLOW / ANDROID 6.0 HAS BROKEN THE BOOTLOOP IN THE UNLOCKED BOOTLOADER WARNING.
The other issue was obviously that you catched what I wanted to do originally, which was to ROOT the device.
- DOWNLOADING AND FLASHING THIS "root-titan-M-BR.zip" IN THE THREAD YOU SPECIFIED ENABLED ME TO FLASH SUPERSU AFTERWARDS WITHOUT PROBLEMS.
Obviously I can now go on doing what I initially intended, which is installing CM13 on my mom's phone.
I almost thought I had bricked the phone for good.
Thank you for your support. :good:

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

TWRP not working: D405

Dear all,
got a LG D405 with Android 5.0.2 and Version V20b here. Wanted to install LineageOS. First I enabled USB Debugging and rooted the device. Then I used ADB to flash the newest Version of TWRP (twrp-3.1.1-0-w7.img). I typed:
adb push twrp-3.1.1-0-w7.img /sdcard/twrp-w7.img
*then*
su (+granting rights on the phone)
dd if=/sdcard/twrp-w7.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Then I shut down the phone and reboot using the key combinations (vol down + power).
After rebooting into recovery mode, nothing happens. I see a blue screen for a fraction of a second, then it goes black and off. Then I can restart the phone normally. How can I get a working TWRP? Thanks for any help!!!

tracko123 said:
Dear all,
got a LG D405 with Android 5.0.2 and Version V20b here. Wanted to install LineageOS. First I enabled USB Debugging and rooted the device. Then I used ADB to flash the newest Version of TWRP (twrp-3.1.1-0-w7.img). I typed:
adb push twrp-3.1.1-0-w7.img /sdcard/twrp-w7.img
*then*
su (+granting rights on the phone)
dd if=/sdcard/twrp-w7.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Then I shut down the phone and reboot using the key combinations (vol down + power).
After rebooting into recovery mode, nothing happens. I see a blue screen for a fraction of a second, then it goes black and off. Then I can restart the phone normally. How can I get a working TWRP? Thanks for any help!!!
Click to expand...
Click to collapse
Did you unlock bootloader?

0000.0000.00 said:
Did you unlock bootloader?
Click to expand...
Click to collapse
No. Basically I follow this guide here:
lineageos.org/devices/w7/install
Now I read a lot here in the forum and think the guide there is very misleading and forgetting a lot of steps. I am very confused because the issue seems to be very complicated and there are so many different versions and solutions. Can someone please tell me which is *the* guide to follow for my phone (LG D405 with Android 5.0.2 and Version V20b)?

tracko123 said:
No. Basically I follow this guide here:
lineageos.org/devices/w7/install
Now I read a lot here in the forum and think the guide there is very misleading and forgetting a lot of steps. I am very confused because the issue seems to be very complicated and there are so many different versions and solutions. Can someone please tell me which is *the* guide to follow for my phone (LG D405 with Android 5.0.2 and Version V20b)?
Click to expand...
Click to collapse
So there is no guide for this and the lineageos one is terrible. So what you have to do basically is get root. Unlock bootloader look around on xda and you have to get patched aboot for your device and stock rom version and flash it. Then flash twrp. With twrp wipe system cache and data partitions. Then flash lineageos and if you want root flash root zip. And if you want gapps flash that too then reboot and setup lineageos.

So, since my device is already rooted... Can I now just flash with a new aboot or do I have to install another stock? As my Version is V20b, this post here says I just can use V20a.
https://forum.xda-developers.com/lg-l90/help/aboot-zip-lg-d405-v20b-t3533401
Is this correct? Or do I have to get a totally different version first? If so, which one? My IMEI tells me this:
Model:LGD405
Suffix:ADEUOP
Latest Firmware40520B_00
I really appreciate any hints. Thank you.
EDIT:
Now I used this file here (https://forum.xda-developers.com/showpost.php?p=54358527&postcount=2), Version 405_v20a with my v20b and it worked perfectly. After I followed this guide here (https://forum.xda-developers.com/lg-l90/general/guide-guide-to-unlocking-bootloader-l90-t2852917) and could install LineageOS 14! Works!!!

tracko123 said:
So, since my device is already rooted... Can I now just flash with a new aboot or do I have to install another stock? As my Version is V20b, this post here says I just can use V20a.
https://forum.xda-developers.com/lg-l90/help/aboot-zip-lg-d405-v20b-t3533401
Is this correct? Or do I have to get a totally different version first? If so, which one? My IMEI tells me this:
Model:LGD405
Suffix:ADEUOP
Latest Firmware40520B_00
I really appreciate any hints. Thank you.
EDIT:
Now I used this file here (https://forum.xda-developers.com/showpost.php?p=54358527&postcount=2), Version 405_v20a with my v20b and it worked perfectly. After I followed this guide here (https://forum.xda-developers.com/lg-l90/general/guide-guide-to-unlocking-bootloader-l90-t2852917) and could install LineageOS 14! Works!!!
Click to expand...
Click to collapse
Good you figured it out but since you didnt quote my post I didnt get notification so I did not see this.

[ROM] TMO Z2 Force 27.1.3 FlashAll (October 2018 Version)

UPDATE 11-9-18: I have updated the FlashAll with the October edition of version 27.1.3. Yes, they updated the ROM but kept the same version number lol.
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from https://mirrors.lolinet.com (thank you!), unzipped it, used root junky's script to convert it (thank you!) and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south. If you don't know what a flashall is, or twrp, or fastboot, you may not be ready for this.
Downloads
1. Updated October Flashall https://drive.google.com/open?id=1PczvmaVv19c91iOGhpNmhmfKyvDkz-ob (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall into a folder called "TMO Moto z2 force 27.1.3 flashall" Open a command prompt in the folder it created. Connect your phone to your computer via ADB.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit. This does not wipe user data.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above (if you use recovery).
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
Not Rooted and want to wipe everything?
Run flashall_erase.bat. It will boot into fastboot mode, update the partitions, and wipe everything.
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance.

texasaggie1 said:
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from @xiyl (thank you!), unzipped it and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south.
Downloads
1. Flashall https://drive.google.com/open?id=1HK2zssCGlPTD5m2A_SAD-RjrQDfmZMTR (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall. It will create a folder called "NASH_TMO_27.1.3" Open a command prompt in the folder it created.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance,
Click to expand...
Click to collapse
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.

kendallgreen said:
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.
Click to expand...
Click to collapse
Sorry! It was late and I linked to the wrong thing. ? Try it now please.

texasaggie1 said:
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from @xiyl (thank you!), unzipped it and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south. If you don't know what a flashall is, or twrp, or fastboot, you may not be ready for this.
Downloads
1. Flashall https://drive.google.com/file/d/1JKu5S7xvy8xvyCodLEt7olr8czP_8FUm/view?usp=drivesdk (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall. It will create a folder called "NASH_TMO_27.1.3" Open a command prompt in the folder it created.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance.
Click to expand...
Click to collapse
I downloaded and unzipped the new NASH_TMO_27.1..3. I added the AdbWinApi.dll and AdbWinUsbApi.dll and got the flashall_then_recovery.bat to run. I didn't install the TWRP installer or Magisk but rebooted to recovery and then system. After several restarts due to unlocked bootloader warning, it came back to build number OCXS27.1.2 kernel [email protected]#1 Fri Apr 20 09:21:27 CDT 2018. Android security level May 1, 2018. Android version 8.0.0 However, all of my apps were retained except Messaging .

kendallgreen said:
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.
Click to expand...
Click to collapse
kendallgreen said:
I downloaded and unzipped the new NASH_TMO_27.1..3. I added the AdbWinApi.dll and AdbWinUsbApi.dll and got the flashall_then_recovery.bat to run. I didn't install the TWRP installer or Magisk but rebooted to recovery and then system. After several restarts due to unlocked bootloader warning, it came back to build number OCXS27.1.2 kernel [email protected]#1 Fri Apr 20 09:21:27 CDT 2018. Android security level May 1, 2018. Android version 8.0.0 However, all of my apps were retained except Messaging .
Click to expand...
Click to collapse
So try it again but this time just do the regular flashall.bat. it should work this time.
It sounds like you are installing this to slot a but your phone is running in slot b. If doing it this way doesn't fix it just look on here for the command to switch your phone from one slot to another.

success. I tried the flashall.bat and got the system updated to 27.1.3. I noticed that when I fastboot --set-active=_a, I had 27.1.2 and with --set-active=_b, I had to restart the phone because it was stuck at the unlocked bootloader warning. thanks.

kendallgreen said:
success. I tried the flashall.bat and got the system updated to 27.1.3. I noticed that when I fastboot --set-active=_a, I had 27.1.2 and with --set-active=_b, I had to restart the phone because it was stuck at the unlocked bootloader warning. thanks.
Click to expand...
Click to collapse
awesome! The whole a/b partition thing can be quite annoying

great job man glad someone did this i was about to try thanks

worked great but i reflashed remove encryption oreo also i didnt know if it was a necessary was being safe you made it easy no fastboot lol great work

My Fellow Texan.....
THANK YOU.
My phone has been in a weird limbo for months. I was on AOSIP ROM but it wasn't rooted, I couldn't use any moto mods and I couldn't install anything because TWRP wasn't installed and it wouldn't let me install it, either. I now have TWRP, but it's showing no baseband. So I'm gonna attempt to fix that but I'm already in a better place than I was. Thanks again, brother.

if you need baseband its easy to fix i had the same issues i was testing kernel its eas fix if you need i can help fix ive bricked and tried everything works easy check last post put on this https://forum.xda-developers.com/z2-force/development/pantheon-kernel-alpha-t3805977

My Tmo box is rooted, presently running the original 27.1 release.. I've been getting the OTA update notifications for 27.1.2.
Do we know if I can skip 27.1.2 and jump straight to the 27.1.3 release? I'd love to be able to do this flash-all and put the update notifications to bed for a while.

dismembered3po said:
My Tmo box is rooted, presently running the original 27.1 release.. I've been getting the OTA update notifications for 27.1.2.
Do we know if I can skip 27.1.2 and jump straight to the 27.1.3 release? I'd love to be able to do this flash-all and put the update notifications to bed for a while.
Click to expand...
Click to collapse
It should be fine to skip revisions.

StonedYoda said:
My Fellow Texan.....
THANK YOU.
My phone has been in a weird limbo for months. I was on AOSIP ROM but it wasn't rooted, I couldn't use any moto mods and I couldn't install anything because TWRP wasn't installed and it wouldn't let me install it, either. I now have TWRP, but it's showing no baseband. So I'm gonna attempt to fix that but I'm already in a better place than I was. Thanks again, brother.
Click to expand...
Click to collapse
If you are on tmobile, flashing the firmware flashall from the aosip thread to get baseband back.

mookiexl said:
If you are on tmobile, flashing the firmware flashall from the aosip thread to get baseband back.
Click to expand...
Click to collapse
If that doesn't work let me know. It should though. You may have to re-root after his suggestion

I'd been avoiding updates because I just didn't want to deal with rooting again and restoring data, etc. This was great!

(bootloader) slot: not found this is what I get with every fastboot command.

I was having the same issue... I was on 27.1.2 and kept getting notified to update, but it kept failing. I'm rooting with Magisk (16.0 initially but then up to 17.1) and it wouldn't update. Thanks to this thread, I ran the flashall_then_recovery.bat and it worked a treat!!! Thank you TexasAggie!

TWRP Installer link is down
The link to the TWRP installer is timing out when loading and comes up with an error message. Is it possible to install the 27.3 update using adb and then flash magisk in the temp twrp? Thanks for your work bro!
UPDATE:
I tried and now I'm stuck in bootloop. I can still get to twrp using adb and did a wipe but it's still stuck in loop land. Do I need to be rebooting in TWRP from slot A or B? This is my first phone that has dual partitions and I am a bit confused by it. Any suggestions? THANK YOU!!
UPDATE:
Tried your flashall update a second time and it worked with no bootloop issue, was able to flash magisk and obtain root again too.

climbhigh77 said:
The link to the TWRP installer is timing out when loading and comes up with an error message. Is it possible to install the 27.3 update using adb and then flash magisk in the temp twrp? Thanks for your work bro!
UPDATE:
I tried and now I'm stuck in bootloop. I can still get to twrp using adb and did a wipe but it's still stuck in loop land. Do I need to be rebooting in TWRP from slot A or B? This is my first phone that has dual partitions and I am a bit confused by it. Any suggestions? THANK YOU!!
UPDATE:
Tried your flashall update a second time and it worked with no bootloop issue, was able to flash magisk and obtain root again too.
Click to expand...
Click to collapse
Glad to hear that!

Question Stuck in a boot loop, can't load recovery

Picked one of these up on the weekend and was looking at going to linageos.
patched upto latest, and went through the linage install steps but missed the step on after installing the bootloader unlock software going into options and unlocking.
Went ahead and installed the linage recovery but now just get a basic screen with options of
START
RESTART BOOTLOADER
RECOVERY MODE
POWER OFF
All options loop me around back to the same place.
trying to start, ends me up with a your device is corrupt message.
I've been trying to get it back to factory.
QPST and QFIL can't see the device.
i can see the device in fastboot.
have downloaded latest firmware.
extracted using payload_dumper
no recovery.img on there.
updated the boot.img, vendor_boot.img dtbo.img from Question - My Asus Zenfone 8 flip is STUCK in CSC FASTBOOT MODE PLZ HELP!, RAW FIRMWARE ANYONE??? | XDA Forums
but no luck as there is no recovery.img in the firmware package.
Any ideas?

Somewhere there was FW update (at least I remember .115) to downgrade from beta A12 to .115FW (android 11). And it could help you I hope. At least you can try.

Yeah all is not lost. Etract and run this to get you back to factory stock. If you can't connect with fastboot, it's a driver issue and you'll just have Google it and pay around until you get the driver right.

Firmware I'm on would be WW-30.12.112.62 i think
is that android 11?
thatguy222 said:
Yeah all is not lost. Etract and run this to get you back to factory stock. If you can't connect with fastboot, it's a driver issue and you'll just have Google it and pay around until you get the driver right.
Click to expand...
Click to collapse
Thanks, will give this a go

no luck, same message.
That link doesn't have a recovery.img either.
am I missing something
running fastboot for boot.img and vendor_boot.img
fastboot flash boot D:\asus\payload_dumper-master\output\boot.img
fastboot flash vendor_boot D:\asus\payload_dumper-master\output\vendor_boot.img
is there more img's i'm meant to be flashing?

Onthax said:
no luck, same message.
That link doesn't have a recovery.img either.
am I missing something
running fastboot for boot.img and vendor_boot.img
fastboot flash boot D:\asus\payload_dumper-master\output\boot.img
fastboot flash vendor_boot D:\asus\payload_dumper-master\output\vendor_boot.img
is there more img's i'm meant to be flashing?
Click to expand...
Click to collapse
I was once stuck in a bootloop after flashing a custom rom and did a fresh install of official firmware.
Go to this website https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11" section. There you can download the firmware file and a 3 step instruction.
By doing so I was able to bring back my phone.
The version of the firmware is from 2021/09/03 (WW-30.11.51.115) so you just need to update to newest release and everything should be fine.

T3chDelicious said:
I was once stuck in a bootloop after flashing a custom rom and did a fresh install of official firmware.
Go to this website https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11" section. There you can download the firmware file and a 3 step instruction.
By doing so I was able to bring back my phone.
The version of the firmware is from 2021/09/03 (WW-30.11.51.115) so you just need to update to newest release and everything should be fine.
Click to expand...
Click to collapse
Thanks T3chDelicious
That did the trick, back to a working stock phone

Onthax said:
Thanks T3chDelicious
That did the trick, back to a working stock phone
Click to expand...
Click to collapse
You're welcome