Database Develop

Hard Bricked P9 Lite

Hi, i have a big problem: my phone isn't starting up anymore. Yesterday i upgraded to Nougat, and all was fine. Then i decided to install Revolution ROM, so i flashed twrp for 7.0 and then flashed the ROM. Phone started up correctly but then i decided to wipe data so i can have a "clean" installation. So i rebooted into twrp and formatted data. After this, phone get into bootloop. Just after that, i couldn't boot into twrp, and when i tried to boot in, it stuck in the yellow text "Your phone is booting up...". Then i downloaded b160, extracted it with Huawei Update Extractor and flashed all(system, boot, cust and recovery). This didn't work, i was stuck in the 3 choices menu with text "Your phone is booting up...", can't even see Huawei's logo. 1 hour ago i installed from sd (3 buttons way) b160, installation successful and now i can see Huawei's logo, but after that black screen . I tried to reboot into bootloader but i don't see anymore yellow "unlocked phone" text. I can just boot into eRecovery. Right now i'm trying to download b100 and trying to see if i can fix it by myself :fingers-crossed:. If u can, please help me, i really need help to get this phone working again.
(Sorry for my bad english )
Edit: i posted in wrong section, sorry xD
Edit 2: i finally boot into bootloader, but "PHONE Locked" . How can i unlock bootloader again? I don't have that code anymore and i can't boot into system..

xDavi01 said:
Hi, i have a big problem: my phone isn't starting up anymore. Yesterday i upgraded to Nougat, and all was fine. Then i decided to install Revolution ROM, so i flashed twrp for 7.0 and then flashed the ROM. Phone started up correctly but then i decided to wipe data so i can have a "clean" installation. So i rebooted into twrp and formatted data. After this, phone get into bootloop. Just after that, i couldn't boot into twrp, and when i tried to boot in, it stuck in the yellow text "Your phone is booting up...". Then i downloaded b160, extracted it with Huawei Update Extractor and flashed all(system, boot, cust and recovery). This didn't work, i was stuck in the 3 choices menu with text "Your phone is booting up...", can't even see Huawei's logo. 1 hour ago i installed from sd (3 buttons way) b160, installation successful and now i can see Huawei's logo, but after that black screen . I tried to reboot into bootloader but i don't see anymore yellow "unlocked phone" text. I can just boot into eRecovery. Right now i'm trying to download b100 and trying to see if i can fix it by myself :fingers-crossed:. If u can, please help me, i really need help to get this phone working again.
(Sorry for my bad english )
Edit: i posted in wrong section, sorry xD
Edit 2: i finally boot into bootloader, but "PHONE Locked" . How can i unlock bootloader again? I don't have that code anymore and i can't boot into system..
Click to expand...
Click to collapse
Try dload method

Ww222 said:
Try dload method
Click to expand...
Click to collapse
I've alredy tried with 2 different firmwares: b130 and b120 but both say that they're incompatible.. Right now i'm downloading b100
(btw, my phone model is L-21 dual-sim)
Edit: I've tried to install b100 without any success. Everytime i try to install a firmware it says "Software installation failed! Incompatibility with current version. Please download the correct update package"
I heard about "oeminfo.img", because before having theese problems i was in 7.0 and to rollback you need to flash this oeminfo.img, but i can't flash anything .
Please help me, i'm alredy losing hope to repair my device... What should i do?

xDavi01 said:
I've alredy tried with 2 different firmwares: b130 and b120 but both say that they're incompatible.. Right now i'm downloading b100
(btw, my phone model is L-21 dual-sim)
Edit: I've tried to install b100 without any success. Everytime i try to install a firmware it says "Software installation failed! Incompatibility with current version. Please download the correct update package"
I heard about "oeminfo.img", because before having theese problems i was in 7.0 and to rollback you need to flash this oeminfo.img, but i can't flash anything .
Please help me, i'm alredy losing hope to repair my device... What should i do?
Click to expand...
Click to collapse
What is your region and model?

Ww222 said:
What is your region and model?
Click to expand...
Click to collapse
Europe, VNS-L21 and C432 if i remember correctly

xDavi01 said:
Europe, VNS-L21 and C432 if i remember correctly
Click to expand...
Click to collapse
Download this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip

Ww222 said:
Download this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
Click to expand...
Click to collapse
Thank you for helping me, i really apprecciate it . Later i'll download it and install and i'll let you know if this works

same here. I'm downloading the update.
---------- Post added at 10:17 PM ---------- Previous post was at 09:41 PM ----------
Ok so I've installed an update but I got a black screen. All I had to do is to clear cache and wipe data etc (in recovery option), then reboot to "dload mode" and... well, it works !

Huawei p9 EVA-LC09 NRD90M test-keys no apps

Hello guys, I read lots of topics about this issue and I would like to explain mine.
I wanted to try Android 7 so I decided to update with B378 firmware.
First of all I got unlocked and rooted phone and I made a huge mistake because I forgot to unroot it before flashing the new firmware.
By the way, I flashed the B378 firmware following the dload method using the *#*#2468579#*#* menu and it worked.
At the first boot I immediately noticed that the phone was missing of all the system apps including camera, calculator, flashlight, keyboard.. and the build number appears to be NRD90M test-keys. The updater menu disappeared as well.
About the keyboard I fixed the problem simply activating it in the settings menu but all the apps were still missing.
I saw I had to flash the B378_update_data_full_hw_eu to restore the apps and here started the odissey.
I couldn't boot the recovery cause it was incompatible with Nougat so after a long search I found the TWRP 3.0.2-N and now it works.
I downloaded the B378_update_data_full_hw_eu.zip package, unzipped it in the dload folder but the hidden menu (*#*#2468579#*#*) isn't there anymore. Nothing happens when I digit that code.
So i tried to boot the phone with vol +, vol -, pwr button pressed and the emui recovery installed the package. Installation was 100% succesful.
The apps are still missing..
What's next step now?

A prerooted device not allows to flash hw/eu. Its your choice, downgrade, or Factory reset + flash the data package with dload.

dkionline said:
A prerooted device not allows to flash hw/eu. Its your choice, downgrade, or Factory reset + flash the data package with dload.
Click to expand...
Click to collapse
now my device is unrooted, the hw/eu flashes correctly but I still don't have the apps.
So I could try to wipe and factory reset via recovery and flash again?

Well I think I did worst than before..
I wiped and formatted from recovery and installed again the b378 firmware using vol+ vol- pwr combination (I had to do like this cause the hidden menu doesn't work), the flash was ok 100% succesful.
Before I still have the keyboard because I updated from my previous firmware but now I don't have it as all the other apps.
I tried then to flash the sw/eu, installation succesful 100% but it's the same! No apps, no keyboard, no updater menu....nothing.
What can I do? Format everything again and flash another firmware? Any suggestion? Which one is the best one for android 7?

Hello
I had the same problem. Wrocł the MM 136 and late 182, 360,361,378. I have all the applications and it works perfectly.

Only Downgrade and upgrade can solve it. But dont forget to unlock on b182 if you want root on B378.

dkionline said:
Only Downgrade and upgrade can solve it. But dont forget to unlock on b182 if you want root on B378.
Click to expand...
Click to collapse
please, can you tell me how to downgrade or can you give me a link?
thank you..it's so frustrating

MystikRiver said:
please, can you tell me how to downgrade or can you give me a link?
thank you..it's so frustrating
Click to expand...
Click to collapse
what was your stock build. ? here is downgrade instructions

Arnys said:
what was your stock build. ? here is downgrade instructions
Click to expand...
Click to collapse
Ok, I restored android 6 with emui 4.1.1 all it's working. Build B182.
I wonder if I can flash android 7 without problems

And? Do the update to B378?
Is really necessary pass by B360, 361, etc?
Thanks

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

Unroot, device bricked

Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks

twrp backup
I found my backup on SD card, but i dont know how to flash it since i cant boot into recovery or enable usb debugging

NameNotFound74 said:
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
Click to expand...
Click to collapse
Download stock firmware and flash it via dload method.

i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM

NameNotFound74 said:
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
Click to expand...
Click to collapse
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number

hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
Thanks, i will try it!

NameNotFound74 said:
Thanks, i will try it!
Click to expand...
Click to collapse
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.

NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg

hassanjavaid8181 said:
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
Click to expand...
Click to collapse
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...

NameNotFound74 said:
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
Click to expand...
Click to collapse
now i flashed rollback and it says that im on b300-log, but i still cant flash b350

NameNotFound74 said:
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
Click to expand...
Click to collapse
Did you download correct pkg according to your build number

hassanjavaid8181 said:
Did you download correct pkg according to your build number
Click to expand...
Click to collapse
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!

NameNotFound74 said:
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
Click to expand...
Click to collapse
Glad that you fixed it..now enjoy

hassanjavaid8181 said:
Glad that you fixed it..now enjoy
Click to expand...
Click to collapse
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?

NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Did backup restored successfully??

hassanjavaid8181 said:
Did backup restored successfully??
Click to expand...
Click to collapse
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.

NameNotFound74 said:
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
Click to expand...
Click to collapse
Did you try to change twrp version??

NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Whats your build number and model?
Are you able to flash twrp or able to boot to it?

Flash Rollback package
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Then stock firmware flash using dload

Go back to stock rom

Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks

aalmeida1972 said:
Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
Click to expand...
Click to collapse
I'd suggest HurUpdater: https://forum.xda-developers.com/ho...h-official-firmware-recovery-t3769279/page111
OTAs do work with an unlocked bootloader, but not with root or custom kernels.

Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks

Try my guide (Tutorial #2, Oreo to Oreo)
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
What also should work is flashing the system.img manually via fastboot.
For this extract the system.img from the correct firmware version with Huawei Update Extractor.
Connect your phone to your PC, boot into fastboot and flash with "fastboot flash system PATH\TO\SYSTEM.IMG".
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
Note for the next time: backup your system partition via TWRP before flashing the custom rom.
Also note that a factory reset is needed, without your phone won't boot, so backup your personal data before doing it.

aalmeida1972 said:
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Click to expand...
Click to collapse
Yes, it works on the P10. You can download the files with the firmware finder app. I'd recommend the newest oreo version for your customisation (e.g. B382 for C432).
But Jannomag's solution should work equally well.

Wich Jannomag´s thread?
Do you have the link, please?
Thanks

aalmeida1972 said:
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
Click to expand...
Click to collapse
The fourth message in this thread

I am sorry, maybe i am just dumb but i can't find it

I followed the guide but know i am i an bootloop. I get the message "your device has failed verification and may not work properly"

It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing

aalmeida1972 said:
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
Click to expand...
Click to collapse
Possibly you renamed the wrong customisation file (i did it once for the 09 while I needed the 29).

Which one did you download? And did you flash manually or did you use my script?
Download my oeminfo, it's from VTR-L29C432 Version 8.0.0.380, while the version doesn't really matter.
Flash it via TWRP using "Install" and "Use Image". Flash it to oeminfo partition. Then do my update script again.

I followed the guide to do Oreo to Oreo - basically wanting to get from custom Rom (fRomFuture B370) back to stock, so I chose the same firmware version to extract. Flashed everything with the script and it went fine and it boots and works.. but
The resolution seems to be off, too low and the right side of the screen is unresponsive to touch (about 1cm )
EDIT- Rolled back to fRomFuture B370 for now - need to find a way to get back to stock, as want to move on to Openkirin ROM instead

HI, i have a vtr-l29 root, i want to unroot(version oreo), how do i do it? what do i need to flash?. thank you Alex