I represent the modified stock firmware, based on the firmware 3.24.40.87 Zenfone 6 (Android 5.0), as well as Zenfone 2 / Zoom / Zenfone 3 ZS550KL (5.0, 6.0.1, 7.0) firmware. ROOT already integrated. Video review here:
Disclaimer: I remind you that everything you do on your fear and risk. I'm not responsible for the breakdown of devices, bricks caused by your own hands (well, my hands, too, it's true, software to kill iron is unlikely to come out)
How to install:1. Requires an unlocked bootloader and TWRP !!!
2. Install the firmware. Installation takes place quickly, about 1 minute. When installing the firmware, the most recent TWRP 3.0M5
Attention! The first start of the firmware after the wipes can reach 10-15 minutes.
Development is hard work. If you want to support not only beautiful words, my profile has information on how it can be done
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
0. Despite the fact that I tried to make firmware based on the most extreme firmware of android 5, where already the asus changed the theme engine and sawed out the possibility of changing the themes of the status bar and settings, I saved this opportunity!
1. Setup wizard, sound service, preset from Zenfone 2 and 3 (6.0.1, 7.0). In addition to the usual effects added "Pure" - when the headphones are inserted and "Outdoor" - for the external speaker. Asus Music the newest version 2.1.0.40, which modified to work on 5.0, in the code frameworks made the relevant edits, so that the asus music did not crash after every reboot of the phone, also from this player there is access to the equalizer (item Fine tuning) Sound in the headphones really cool
2. The kernel I modified with a lot of governors and optimizations, the Mass Storage mode, the fix of the stock core, which could not catch the network after the exit from the subway or cellars, fixes of the device hangs on charging, etc. Thanks @nheolinkin https://forum.xda-developers.com/zenfone-5/general/share-discussion-users-problems-unlock-t3629739
3. Curtain almost in the style of Zenfone 3 Android 7.0 with the corresponding icons therefrom, also an increased grid of 5x4 titles, the Android system icon and debugging from ydb from android 7, the icon of the system's graphical interface from android 6.0.1, reduced the minimum possible number of items for quick settings (Not counting the first line of the quickbox-quickbox) from 8 to 5
4. Extended reboot menu with items for quick reboot, reboot into bootloader and recovery + at the bottom of setting sound modes
5. Added a response to the call by applying the phone to your ear (Settings- ZenMotion- click on the text "Motion gestures" - the menu will open and you will place the appropriate checkboxes there). It does not work very well, it is necessary to apply it quite sharply to the ear, but it does work nonetheless. During the incoming call, hold the phone in front of you in your hand, bent at the elbow and along the arc, without bending the elbow, bring to the ear, there will be a pick-up
6. Start the camera by double pressing the volume buttons when the phone is sleeping and the screen is not lit (Settings-Lock Screen-Current Camera)
7. Advanced adjustment of screenshots (disabling / enabling the sound of the shutter, the format of screenshots). In the main Settings menu item "Screenshot"
8. Updated a bunch of services and applications to the extreme firmware of zenfon 2 5.0 2.20.40.198 and something borrowed from its own sewing zenfon 2 on 6.0.1
9. The menu of the recent applications as in 6.0.1 (flat)
10. Due to the lack of space in the system partition, massive sawing was necessary. The first thing, demolished the Asus Mobile Manager. This is the main evil, android himself is able to clean and programs know whether to auto-start them or not. If you think that if the asus mobile manager writes that 10000 applications were stopped by the autorun manager, then it does not mean that they all started, in fact, 10-15 pieces, and the rest did not work without the manager. In general, this rubbish with advertising and pictures, which only harms and eats. You can not try to put it from the market, write that the device is not supported
11. App powersaver and the modes themselves took from zenfon 2 and something under our devices adapted. Unlike some incomprehensible modes, they actually change something to the zenophon 5 and 6, for example, when switching from the performance mode to the optimal illumination of the screen, the brightness (inoutdoor mode) is slightly reduced and the frequency drops to 1600 MHz. And, in general, it is better to always use a productive mode, oddly enough, the battery holds better.
12. Accelerated update of the davick cache and it takes up less memory, however, there may be performance sagging the first minutes after reboots.
13. Full support for Asus Flip Cover 2
14. I borrowed the brightness levels of the display from Zenphon 2 and added a few to reduce the minimum manual and auto brightness
15. Firmware already rooted, built-in SuperSu
16 Modified ZenUI Launcher with autorotate homescreen, smooth scaling, extra font sizes, extra dock bar
16. Other, I forgot already what I added
Current known issues :
1. Randomly turn on camera led after wake screen with double tap/press power button. For turn off led should lock/unlock screen again
Folder with firmware on google disk. It is better to use browsers, and then clients cache rarely and slowly update. Link https://drive.google.com/drive/fold...ourcekey=0-9TEOq_YFjreiYYDaN7MFkA&usp=sharing
Kernel source here(github not working for me in present time): https://drive.google.com/file/d/0B4...=sharing&resourcekey=0-vhvAj-PYvx70_22cK7wHiA
XDA:DevDB Information
BORETS ROM, ROM for the Asus Zenfone 5
Contributors
BORETS24
Source Code: https://github.com/BORETS24/for-Zenfone-6-5.git
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Need unlocking bootloader
Based On: Stock
Version Information
Status: Testing
Created 2017-07-13
Last Updated 2019-08-16
Successful install in my Zenfone 5, and root access is active. Audio wizard is running even i use Poweramp. So far so good.
Good work Borets
"You said something new could happen," I guess.
We are waiting for the success of the success!
I think the volume of zenfone features that piled up in this rom. 824mb wwwooow
I will test
I found three bugs:
1. Gallery crash. Solution- install gallery update from Google Play and other sources and clear data
2. Did not work Asus Contacts Dark theme, after reboot again light theme. Try to fix...
3. Powersave modes work incorrectly. very often max freq decrease to 1333 or 1600 MHz. Also try to fix
4.Camera closed when make photo
EDIT: Now everything looks fine.
Mustafa Can said:
I will test
Click to expand...
Click to collapse
We are expecting a worthy bout Mustafa
thanks kardeşim
Changelog BORETS ROM:
-Fixed:
*** 1. Camera outage when taking photos
*** 2. Crash Gallery
*** 3. Flattened quick settings panel icons (replaced by others)
***4. Power saving modes (like the higher the maximum frequency does not drop to 1333 MHz)
- Decreased DPI by default from 320 to 300
- even deleted the application (Asus Backup, ShareLink, etc.), well, there is a catastrophic lack of space in the system partition
zenfone 5?
---------- Post added at 01:37 AM ---------- Previous post was at 01:23 AM ----------
Potoyskee said:
Successful install in my Zenfone 5, and root access is active. Audio wizard is running even i use Poweramp. So far so good.
Click to expand...
Click to collapse
how did you flash?
jhephoy said:
zenfone 5?
---------- Post added at 01:37 AM ---------- Previous post was at 01:23 AM ----------
how did you flash?
Click to expand...
Click to collapse
By using twrp 3.0.M5-0,
1. advance wipe select dalvik,system,cache, and data
2.wipe format data then type YES
3. Reboot to recovery again
4. install zip file BORETS24.
Bug report.
Front cam have blur in left of the screen if you take video.
Potoyskee said:
Bug report.
Front cam have blur in left of the screen if you take video.
Click to expand...
Click to collapse
Confirm. But if you switch video resolution from FullHD to HD for front camera - blur will not. I changed codecs and camera config and don't remember, stock have FullHD for front camera or not?
BORETS24 said:
Confirm. But if you switch video resolution from FullHD to HD for front camera - blur will not. I changed codecs and camera config and don't remember, stock have FullHD for front camera or not?
Click to expand...
Click to collapse
no it doesnt... stock only have HD and TV quality for front camera
sorry. Borets Kernel work for CM12.0 ??? [5.0.2]
ShOgYzzz said:
sorry. Borets Kernel work for CM12.0 ??? [5.0.2]
Click to expand...
Click to collapse
No, kernel only for stock based Lolipop ROMs
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
BORETS24 said:
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
Click to expand...
Click to collapse
Sorry. i think this thread is Kernel.
BORETS24 said:
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
Click to expand...
Click to collapse
I had problems logging into facebook on the previous version. Is it fixed in this?
Very good work!
:good:
the.password said:
I had problems logging into facebook on the previous version. Is it fixed in this?
Very good work!
:good:
Click to expand...
Click to collapse
It is not my fault. It is facebook fault and your fault too. For correct facebook work you need use x86 versions! From Google Play facebook present to us ARM version here normal versions for x86 https://www.apkmirror.com/apk/facebook-2/facebook/variant-%7B%22arches_slug%22%3A%5B%22x86%22%5D%7D/
Borets; Do not you think roms thinning? For example, gapps pico and other unnecessary
Related
CAMERA MOD FOR S6 EDGE G920F & G920I LOLLIPOP 5.1.1
YOUR DEVICE NEED ROOT ACCESS
THIS MOD IS ONLY FOR SAMSUNG TOUCHWIZ BASED ROM (STOCK/CUSTOM)
*****************************************
Many user reported that this Mod is not working, I don't have the device now, I have modded the camera from stock Rom, I am not sure if this Mod will work with any custom ROM.
Anyway, I will update the Mod again Once the Marshmallow is out.
*****************************************
PLEASE READ COMPLETE POST BEFORE POSTING ANY QUESTION
CHANGE LIST:
IMAGE QUALITY:
• Increased to 100% for Normal Mode (Now you will get 100% quality, Uncompressed).
• Increased to 100% for Burst Mode.
VIDEO QUALITY:
Video Bitrate:
• UHD 4K (3840x2160) : Increased to 70Mbits from 48Mbits.
• FHD (1920x1080) [FRONT, BACK & DUAL-MODE CAMERA; FAST MOTION : 1/2, 1/4, 1/8] : Increased to 25Mbits from 17Mbits.
• FHD (1920x1080)@60FPS : Increased to 50Mbits from 28Mbits.
• WQHD (2560x1440) [FRONT & BACK CAMERA] : Increased to 40Mbits from 25Mbits.
• HD (1280x720) [FRONT, BACK & DUAL-MODE CAMERA] : Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/2): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/4): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/8): Increased to 8.5Mbits from 6Mbits.
VIDEO RECORDING TIME:
• Increased to 30:00 Minutes from 5:00 Minutes for WQHD and UHD. (Maximum upto 4GB = 8 Minutes : 09 Seconds)
• Increased to 30:00 Minutes from 10:00 Minutes for FHD_60FPS and DUAL_FHD.
• File Size Increased to 4 GB from 2GB for Slow motion and Fast Motion video recording.
SNAPSHOT RESTRICTION REMOVED:
• Now you can Take a Snapshot while recording UHD, WQHD and FHD_60FPS videos.
• While recording UHD & WQHD video, 15.9 MegaPixel (5312x2988) stills will be captured.
• While recording FHD_60FPS video, 2.0 MegaPixel (1920x1080) stills will be captured.
FLASH RESTRICTION REMOVED:
• Now you can use Flash even when the Battery is lower than 15%.
NOTE: If the battery is below 15%, then everytime you open Camera app, a Warning pop-up will appear "Flash is turned off to save battery (Below 15%). However you can turn on the flash manually." and the Flash will be Off every time you open the camera when battery below 15%, you have to manually change the Flash.
BATTERY LOW RESTRICTION REDUCED TO 1% FROM 5%:
• Now you can use Camera even if the battery is lower than 5%. (and Greater than 0%).
*********************************************
*** TAKE BACK UP OF EXISTING CAMERA APK AND XML FILE ***
Steps for replacing Manually.
• Delete all the .odex [If Exist] files (SamsungCamera4.odex and SamsungCamera4.odex.art) present in "arm " folder (system/app/SamsungCamera4/arm).
• Replace SamsungCamera4.apk (system/app/SamsungCamera4) with the one provided in below attached .zip file, based on your device model.
• Replace media_profiles.xml (system/etc) with the one provided in below attached .zip file, based on your device model.
• Set Correct permissions:
• Folder Permission: 0755 [rwxr-xr-x]
• File permission: 0644 [rw-r--r--] for SamsungCamera4.apk and media_profiles.xml
• After replacing the files and setting correct permissions. Wipe Camera data from App Manager; Please go to recovery and wipe the cache then Reboot.*********************************************
If you like this Mod; consider Hitting Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Button.
Do you think thus will work on the S6 Edge for T-Mobile. Testing Now.
EDIT: Here is media profile.xml for Tmo S6 Edge https://mega.co.nz/#!Ex0CCYwa!znQsVNi5xj1CnLL7pUUZ-YoZp-bxh9H1Q78nwNuSgFU
Thanks for Reply.
ktetreault14 said:
Do you think thus will work on the S6 Edge for T-Mobile. Testing Now.
EDIT: Here is media profile.xml for Tmo S6 Edge https://mega.co.nz/#!Ex0CCYwa!znQsVNi5xj1CnLL7pUUZ-YoZp-bxh9H1Q78nwNuSgFU
Click to expand...
Click to collapse
Please don't try it on S6 Edge.
I'll create new thread for S6 edge tomorrow or by day after tomorrow with Modded Camera.
amk19 said:
Please don't try it on S6 Edge.
I'll create new thread for S6 edge tomorrow or by day after tomorrow with Modded Camera.
Click to expand...
Click to collapse
Oh wow thanks a bunch!!
So does this need root in order to be done?
this is samsungcamera3 or not?
could you please make a version on samsungcamera4 with multi DPI? =)
i changed my dpi to 480 and now the live-view is not in fullscreen :x
i could send you the samsungcamera4 from galaxy 5 edge =)
JoeFCaputo113 said:
So does this need root in order to be done?
Click to expand...
Click to collapse
Really?
Does this work on sprint variant?
nflwideout86 said:
Does this work on sprint variant?
Click to expand...
Click to collapse
It should work, Give it a try,
@JoeFCaputo113 Yes, Root access is needed on your device.
@ktetreault14 I will update s6 edge camera Mod by tomorrow EOD. Sorry..
@Dr4g0n I am Sorry mate. I can't make it Multi DPI supportable.
It's SamsungCamera4.apk from Stock S6 Lollipop firmware.
amk19 said:
It should work, Give it a try,
@JoeFCaputo113 Yes, Root access is needed on your device.
@ktetreault14 I will update s6 edge camera Mod by tomorrow EOD. Sorry..
@Dr4g0n I am Sorry mate. I can't make it Multi DPI supportable.
It's SamsungCamera4.apk from Stock S6 Lollipop firmware.
Click to expand...
Click to collapse
works with no issues on latest stock german firmware G920FXXU1AOCV
zathus said:
Really?
Click to expand...
Click to collapse
Yes, really. Nowhere in there is it stated. So instead of being snarky, you cuda gave a useful comment instead of wasting space.
JoeFCaputo113 said:
Yes, really. Nowhere in there is it stated. So instead of being snarky, you cuda gave a useful comment instead of wasting space.
Click to expand...
Click to collapse
In what world can a non rooted phone replace system apps and change permissions with out root? Common sense would have saved you not 1, but 2 posts of ignorance
zathus said:
In what world can a non rooted phone replace system apps and change permissions with out root? Common sense would have saved you not 1, but 2 posts of ignorance
Click to expand...
Click to collapse
look, I know the poster should have known root was required - and asking a second time showed how little he does know - but it really isn't necessary to get nasty - it breeds contempt and that is not an environment conducive for good things - you could have easily told him yes root was needed and briefly explained why he should have known without directly calling out his ignorance. That would have been implied in your answer without really saying it.
It isn't all that big of a deal - but one post of negativity leads to another and another and it just isn;t necessary - I am not wanting to get into big fight over this - just thought I would share my two cents.
mocsab said:
look, I know the poster should have known root was required - and asking a second time showed how little he does know - but it really isn't necessary to get nasty - it breeds contempt and that is not an environment conducive for good things - you could have easily told him yes root was needed and briefly explained why he should have known without directly calling out his ignorance. That would have been implied in your answer without really saying it.
It isn't all that big of a deal - but one post of negativity leads to another and another and it just isn;t necessary - I am not wanting to get into big fight over this - just thought I would share my two cents.
Click to expand...
Click to collapse
Fare enough. It was just pretty obvious =) back on to the subject at hand. Nice to see a camera mod so quick. Exciting.
zathus said:
Fare enough. It was just pretty obvious =) back on to the subject at hand. Nice to see a camera mod so quick. Exciting.
Click to expand...
Click to collapse
absolutely - I ahve taken some amazing photos with this camera - I own a 13MB Sony DSLR with Telephoto - with the exception of the Telehpoto images I have taken with the sony - the close ups and macro type images I have taken with the S6 camera stand up to any I have taken with the Sony. AMAZING that such quality images can be taken with a camera on a cell phone. Pretty close to the Number 1 reason I bought this phone. (funny - I buy a phone for the camera ! - but the benefit is that I can make phone calls with it to, and a lot more.... - LOL)
thanks
JoeFCaputo113 said:
Yes, really. Nowhere in there is it stated. So instead of being snarky, you cuda gave a useful comment instead of wasting space.
Click to expand...
Click to collapse
Have you tried this mod? I wanted to see if someone else with a sprint gs6 has tried it successfully yet.
Works great at G920I, movistar branded from Chile. G920IDVU1AOC6
Thanks!
(photo file size increase almost to double, from 6 Mb to 11.5)
KqK said:
Works great at G920I, movistar branded from Chile. G920IDVU1AOC6
Thanks!
(photo file size increase almost to double, from 6 Mb to 11.5)
Click to expand...
Click to collapse
Examples please???
Couldnt flash it on the 920t
In the subject line it says "Removed RESTRICTIONS"
Are these the restriction below that applies for UHD, QHD and FHD (60fps)?
Features unavailable with UHD, QHD and FHD (60fps)
- HDR (rich tone)
- Video effects
- Video stabilisation
- Taking pictures while recoding video
- Tracking AF
oh no, not another AOSP ROM,
but this ist actual the best AOSP Rom for the Redmi Note 2.
1. Multilanguage, Camera and LED notification work fine. Vibrate on touch is not working, but vibrate on notifications are working fine.
Battery is not better then on other AOSP Roms, and far away from MIUI.
2. Not the pesky 3G , G and H symbols , these are reasonable in reception symbol with inside ->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Xposed is pre installed, you don´t need to flash self
4. very less Bloatware, where nothing disturbs you
5. The download speed display is finally gone and you can take advantage of Gravitybox (significantly smaller)
6. The display " flickers " no longer ( like other AOSP Roms)
Full Changelog: Translate with Google
Based on open source projects AOSP production, comes back cards, etc., stable and practical
Recovery brush into a third-party, must Shuangqing front brush, pay attention to back up personal data
Xposed Framework v75 update to the latest version, brush machine process automatically loaded, no user manual brush into
Timer switch function
Smooth video enhancement tools
Only a default desktop, removing unwanted desktop plug
The main screen to add an analog clock
The default boot language to Chinese
The default time zone for China
ROOT privileges intact
Set in the Advanced Settings function add
Default load Xposed framework, without the need to manually brush into the frame
Brush completed manually check the settings - Advanced settings -Xposed frame - module module, can be used after restart
Immersive status bar, so that all third-party support immersed APP
Green guard, to prevent APP background
Gravity kit , adjust the status bar, button, display, notifications, full DIY ROM
Transition animations, adjustable list of animation, animation system, pop-up message animation, to energize your ROM
The status bar network speed, mobile data display, WIFI network speed down the line
The status bar icons, change data, WIFI, battery icon, modify the clock, the operator text messages
Viper sound effects to enhance the sound quality of music artifacts
Originalthread: http://bbs.ydss.cn/thread-588454-1-1.html
ROM Download link: https://mega.nz/#!mF0QURRC!XsIf0f9k2ybs69-WPz0AKONnHybQcjBDVe6j7FrlM5w
DeepSleep FIX:
if you use the volume rocker(VOL+/VOL-) but ONLY when the screen is turned off, then the phone go not back to Deepsleep.
To fix this, you must replace "android.policy.jar" with this fixed Version: http://www18.zippyshare.com/v/om8DXTik/file.html
To install you can go in TWRP / system mount and then push by ADB in / system / framework .
Downloadmirror: http://yunpan.cn/cFfqtz7EprXaN
How to Download from Downloadmirror:
What about notification LED?
Thanks! What about camera? As I understood, latest aosp roms had issues with the main camera.
camera and LED notification work
Battery is not better then on other AOSP Roms.
aidac said:
Thanks! What about camera? As I understood, latest aosp roms had issues with the main camera.
Click to expand...
Click to collapse
The Main Camera works fine with this rom. I tested it over the day and the only issue i found was battery life (again). You will make it through a day, but Idle takes a lot of battery (compared to original MIUI). So if you hate MIUI as much as i do, than you may have to charge your phone once a day, even with a SOT of only 2h, but if you can live with MIUI, you should wait a few more days (or weeks). I will flash non MIUI Roms until i found one with great battery life and without anoying stuff.
Edit: I believe I've found the reason for the bad battery life. The phone doesn't enter deep sleep and is always awake. I will try to reflash the rom, maybe I can solve this problem that way.
reflex9000 said:
camera and LED notification work
Battery is not better then on other AOSP Roms.
Click to expand...
Click to collapse
But just works with one color or it has a menu to configure them?
wasd- said:
But just works with one color or it has a menu to configure them?
Click to expand...
Click to collapse
There is no menu to configure them, but you could download one of the many apps from the playstore or even from xda. Whatsapp, for example, has its own led light configuration and that works. For me normal chat messages are white and groupmessages are blue and both works.
The battery issue seems to be gone. After wiping the dalvik and cache again (first wiped, after flashing the rom), it seems, that the phone enters the deepsleep normaly and the battery doesn't drain as fast, as it did before. I'll look how much battery i will loose tomorrow, but i think, that this rom is the best out there to avoid MIUI
Is audio over Bluetooth and voice calls on speaker working fine?
z2k said:
Is audio over Bluetooth and voice calls on speaker working fine?
Click to expand...
Click to collapse
Audio over Bluetooth works and voice calls on every speaker (including speaker over bluetooth) works fine as well. I will try to remove the bloatware of the zip tomorrow, so if you can wait, you will get a clean rom for flashing
You just have to flash the zip and gapps and your phone will be MIUI free, without any noticeable bugs (HDR is not working, but i dont use it, so not noticeable for me )
Flash this ROM..
Better than other from my perpective...
but why vibration still not working for me? already turned on "Vibrate on Touch" but still nothing?
did anyone have this same issue? any solution? or there is a trick?
Gapps inclided or not?
Inviato dal mio Redmi Note 2 utilizzando Tapatalk
Sorry guys, vibration does not work with this ROM.
Hope it comes with a update.
reflex9000 said:
Sorry guys, vibration does not work with this ROM.
Hope it comes with a update.
Click to expand...
Click to collapse
confirmed
Vibrate on touch is not working, but vibrate on notifications are working fine.
Battery life is ok for now (been using it for 4 hours since full charge, 87% left).
Camera is working fine.
Antutu scored 45k+.
Just one thing that bugs me is the center clock, as I am unable to remove it. Using gravity box, I can move it to the right, but then it overlapps user selection on the lockscreen. Any ideas?
how to flash?wipe cache,data,dalvik,and system?
I think there arent any gapps. When i installed it, none gapps were installed.
JakobiE said:
I think there arent any gapps. When i installed it, none gapps were installed.
Click to expand...
Click to collapse
There isn't gapps in AOSP and CM...
SkiFire13 said:
There isn't gapps in AOSP and CM...
Click to expand...
Click to collapse
Aosp for my y300 has gapps included in the rom zip...
Inviato dal mio Redmi Note 2 utilizzando Tapatalk
added "DeepSleep FIX when use the volume rocker" in Post #1
All my google camera modifications are here
Made for Razer Phone 2, Tested on firmware O-MR2-RC009-RZR-181124.2009
Latest google camera version:
Minimum settings - maximum "automatics"...
MGC_6.1.021_RazerPhone2_V1c: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1351/
Changelog:
V1:
- in the photo part, everything works, the video mode was not engaged ...
V1a:
- removed the bright flash at the beginning of the shooting video
V1b:
- added AWB Correction to NS (Night Sight)
V1c:
- fixed the launch by double pressing the "Power" button
- increased photo resolution in "Lens Blur" mode (at RP2 back=12MP, front=7MP)
MGC_6.1.021_RazerPhone2_V2a: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1350/
Changelog:
V2a:
- minor changes to correct work on Android 9.0
Made for Razer Phone 2, Tested on firmware P-MR1-RC003-RZR-190305.3110
MGC_6.2.024_RazerPhone2_V1d: https://www.celsoazevedo.com/files/android/google-camera/f/changelog442/
Changelog:
Only android 9.0
V1: https://drive.google.com/open?id=1eNTZgE8MBdwFqWa-DGhpevF9ixwt21XD
- init release
V1a: https://drive.google.com/open?id=1at8iINjc7KCV2zihpLGidESik0oagTrq
- correct exif
V1b: https://drive.google.com/open?id=18siv28p5DWZMbhtpncbrZ9BLY93ah8iB
- minor changes ...
V1d:
- added Gcam AWB (included in the settings)
MGC_6.2.030_RazerPhone2_V5: https://www.celsoazevedo.com/files/android/google-camera/f/changelog562/
Changelog:
Only android 9.0
V1: https://drive.google.com/open?id=1id-Y9gZyHE8bf5qg2o1-rHHDig1aKPmQ
- changes are the same as in MGC_6.2.024_RazerPhone2_V1d
V2:https://drive.google.com/open?id=17F3DGX-OqTHGjtXNjuWZ3fCKIXUKGDCj
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V3: https://drive.google.com/open?id=1RPTKeZtiMUj0405ScKB8CtXzZTCCj4Cp
- added slow-mo (120 \ 240)
- changed the algorithm of work of hdr +, there should be better details (probably ...)
V4: https://drive.google.com/open?id=1rAgBKJ9ZixrsfP2_29HHJabm-2g9etLY
- added 60 fps to the back camera video mode.
V5:
- various minor changes / corrections.
Final version.
MGC_7.0.009_MiIXSE.RPII.MiVIII_V1b: https://www.celsoazevedo.com/files/android/google-camera/f/changelog745/
Changelog:
Only android 9.0+
V0: https://drive.google.com/open?id=1F5uUzF1YMzPjGjG1OAom7Dw0HEcKZsG8
- init version(test)
V1: https://drive.google.com/open?id=1JyFyjnl0QXa2rIditAuvfmdzxc0vbBBX
- various changes and corrections...
V1a: https://drive.google.com/open?id=1SFhqSWzw9vAcJKuXoumCAUMz5tmlgc-w
- fixed errors in V1
V1b:
- fixed errors
MGC_7.2.018_RPII.MiVIII_V0b: https://www.celsoazevedo.com/files/android/google-camera/f/changelog909/
Changelog:
Only android 9.0+
Razer Phone 2 and MI8 only
V0: https://drive.google.com/open?id=13f79-D5lNk2HNEYPDiX11UK1EdzfatQq
- init version(test)
V0b:
- fixed some errors
(MI9SE support will be in future versions.)
Older version of google camera:
many settings ...
MGC_3.2.045_RazerPhone2_V1: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1352/ (clone: https://drive.google.com/open?id=1OGFgap9dRWrhOUxlrPYgoAtSgTn8rNDO)
Changelog:
V1:
- in the photo part, everything works, the video mode was not engaged ...
My settings for MGC3.2:
bsg19071979 said:
Made for Razer Phone 2, Tested on firmware O-MR2-RC009-RZR-181124.2009
Latest google camera version:
Minimum settings - maximum "automatics"...
MGC_6.1.021_RazerPhone2_V1: https://drive.google.com/open?id=109ZzlIcoaN2at9G5FBmKH85lKG0LWLPW
Older version of google camera:
many settings ...
MGC_3.2.045_RazerPhone2_V1: https://drive.google.com/open?id=1ufDZ9b8P0LtQwyt0oHddggPuXvegzHZj
In the photo part, everything works, the video mode was not engaged ...
Click to expand...
Click to collapse
Awesome man! Thank you for posting. I'll give it a try today.
Is there a reason none of the gcams so far have working slow motion video? I find it hard to believe that the hardware on this phone is incapable of slow motion... And this version removes the option all together...anyone know why? Can we get a working version with slow motion? I really miss that feature. Found it VERY handy when troubleshooting fast moving machinery at work.
mmfnsmith said:
Is there a reason none of the gcams so far have working slow motion video? I find it hard to believe that the hardware on this phone is incapable of slow motion... And this version removes the option all together...anyone know why? Can we get a working version with slow motion? I really miss that feature. Found it VERY handy when troubleshooting fast moving machinery at work.
Click to expand...
Click to collapse
I can't make it work on 8.1 yet...
On the MGC_6.1.021_RazerPhone2_V1a version, if I use the double-click side button shortcut to start Gcam, normal camera mode does not save images after capturing them. Switching camera mode works around this issue, but is inconvenient.
If I start Gcam normally from the app drawer, the camera mode saves images as usual.
Can you reproduce this issue?
Nomyth said:
On the MGC_6.1.021_RazerPhone2_V1a version, if I use the double-click side button shortcut to start Gcam, normal camera mode does not save images after capturing them. Switching camera mode works around this issue, but is inconvenient.
If I start Gcam normally from the app drawer, the camera mode saves images as usual.
Can you reproduce this issue?
Click to expand...
Click to collapse
When you call a Google camera from another application or the power button hdr + does not work.
fixed in "V1c" ...
Perfect, works great!
Will you consider adding telephoto lens toggle similar to other Gcam branches?
Nomyth said:
Perfect, works great!
Will you consider adding telephoto lens toggle similar to other Gcam branches?
Click to expand...
Click to collapse
If add it so that it works without fixing build.prop then the Google lens will not work.
Abousltely beast. Salute my man.
I tried installing this apk but i get the "app not installed" when i try to install it. Anybody have an idea what it could be?
EDIT: Nvm, I did not uninstall an older version of the app. Now that i did, it installs fine.
bsg19071979 said:
If add it so that it works without fixing build.prop then the Google lens will not work.
Click to expand...
Click to collapse
Possible to do one version with the aux camera but without Google lens? Or you are working on a fix on this?
Speedknight said:
Possible to do one version with the aux camera but without Google lens? Or you are working on a fix on this?
Click to expand...
Click to collapse
Aux lens has less light sensitivity, it has no stabilization, so it makes the photo under any conditions worse than the main lens. aux lens is not needed ...
Any way to get this updated with the 60fps video recording?
So I downloaded and installed the new version today. The camera is much, much faster, but it crashes every time I try to take a video. Is there some combination of settings causing this?
Edit: I changed the interface style (in the mod menu) from Pixel III to Pixel II, and video now works! However there is now a bright flash at the beginning of the video that is actually captured in the footage.
For android 9.0 need to do it all over again. It will take some time.
bsg19071979 said:
For android 9.0 need to do it all over again. It will take some time.
Click to expand...
Click to collapse
Are you planning on working on it?
jal3223 said:
Are you planning on working on it?
Click to expand...
Click to collapse
I don’t know yet ... There will definitely be tracking focus in video mode (example: https://drive.google.com/open?id=10AGDx3aDS0Bue7lv1Ql1eMw4DEhQr21h) and there will definitely not be slow-mo, since the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES key will give a maximum of 30 fps for Android 9.0, and for slow-mo need 120fps.
bsg19071979 said:
I don’t know yet ... There will definitely be tracking focus in video mode (example: https://drive.google.com/open?id=10AGDx3aDS0Bue7lv1Ql1eMw4DEhQr21h) and there will definitely not be slow-mo, since the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES key will give a maximum of 30 fps for Android 9.0, and for slow-mo need 120fps.
Click to expand...
Click to collapse
Either way, without your work I'd have returned the phone the day after I bought it. So thanks again!
Would love a Pie version as well. Just ordered the phone with the price drop and camera is one thing that's lacking
Hopefully there is continued development. I just bought my wife this phone coming from the s8+. Can you add a TIMELAPSE option? She used that a lot. Thanks.
OFFICIAL XIAOMI.EU ROM FOR XIAOMI 11T PRO
Android 12 / MIUI 13
I. READ ME FIRST!
Your bootloader should be unlocked
Installation via FASTBOOT (No TWRP version yet)
This will ERASE ALL YOUR DATA - do a BACKUP first!
May brick your device if you don't know what you are doing
II. DOWNLOADS & INSTALLATION
Download the ROM first:
https://androidfilehost.com/?w=files&flid=321331
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
Unpack downloaded zip file in the PC
Reboot your device to fastboot mode (press volume down + power)
Connect to PC via USB cable
Run fastboot installation script from unpacked zip windows_fastboot_first_install_with_data_format.bat
Wait for the phone to restart the system
After reboot it is done (first boot may take up to 15min)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OG Thread: https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Firstly, bootloader must be unlocked before installation. Secondly, it's not only for RKDMIXM version, but also for RKDEUXM.
antykat said:
Firstly, bootloader must be unlocked before installation. Secondly, it's not only for RKDMIXM version, but also for RKDEUXM.
Click to expand...
Click to collapse
gotcha
Can this be rooted? Since there is no custom recovery to flash Magisk?
rosuvladut said:
Can this be rooted? Since there is no custom recovery to flash Magisk?
Click to expand...
Click to collapse
Yes. Just patch the boot.img via magisk that you can find inside the zip file and flash it via fastboot.
MIUI dialer and SMS or google?
and do it have native call record?
For the people who cant get it to boot/flash use this one to fix
I used windows to flash got error boot_ab not found etc etc
or replace all the _ab with nothing that will work!
mi 11t pro flash fix - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
zelenko said:
MIUI dialer and SMS or google?
and do it have native call record?
Click to expand...
Click to collapse
Xiaomi all, with recording
What are the differences between RKDEUXM and this Rom?
No WIFI and Bluetooth issues? What can I expect?
krzywojc said:
What are the differences between RKDEUXM and this Rom?
No WIFI and Bluetooth issues? What can I expect?
Click to expand...
Click to collapse
"Our ROMs features (Whats not in Global):
Based on China Stable / Weekly builds (except POCOF1, HMNote6Pro, HMNote8T, HMNote9ProMax, HMNote9Pro_HMNote9S, HMNote9ProEU)
Enabled search gesture (swipe up) on the desktop
3way reboot menu (in dev settings)
MIUI Contacts and Dialer
Dark Mode (Night Mode) for all devices (In the dev settings except 9.x/10.x)
Removed ads in MIUI system apps
Face Unlock for all devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures
AI preloading option in MIUI Lab
Fullscreen gestures
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Default volume control stream toggle
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps
Advanced menu with color icons
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Screen-OFF animation
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app options
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Charging screen
And more, and more made by our 9 years MIUI mods experience."
I dont get it. I live in EU and have Global version. Whats EU Global?
bariz143 said:
I dont get it. I live in EU and have Global version. Whats EU Global?
Click to expand...
Click to collapse
Unofficial ROM from xiaomi.eu is a hybrind. It uses China ROM as basic (latest and with more features), remove bloatware, change language, add google and some nice extra, but keep the miui style and there it is.
@Miraculix666
There is no China rom for 11T Pro. That's why the rom from xiaomi.eu is based on Global rom RKD(MI)XM.
dlazycoder said:
gotcha
Click to expand...
Click to collapse
Anyone tried playing genshin impact ? Can it run fine on 60 fps? Because in original MIUI rom, genshin impact limited only to run at 40 fps
Also on benchmark apps like antutu and geekbench, can it achieve a "normal" score like other snapdragon 888 phone? In geekbench for example, a "normal" snapdragon 888 without being limited or throttled, cpu single core should exceed 1000 point
Please kindly test it for anyone already using this new miui.eu rom, thanks
[email protected] said:
Anyone tried playing genshin impact ? Can it run fine on 60 fps? Because in original MIUI rom, genshin impact limited only to run at 40 fps
Also on benchmark apps like antutu and geekbench, can it achieve a "normal" score like other snapdragon 888 phone? In geekbench for example, a "normal" snapdragon 888 without being limited or throttled, cpu single core should exceed 1000 point
Please kindly test it for anyone already using this new miui.eu rom, thanks
Click to expand...
Click to collapse
Don't think CPU throttle is the problem here, I reached 1115 single core and 3340 multicore even with the latest global rom, my guess is the GPU that is being limited to avoid heat issue.
sushuguru said:
Don't think CPU throttle is the problem here, I reached 1115 single core and 3340 multicore even with the latest global rom, my guess is the GPU that is being limited to avoid heat issue.
Click to expand...
Click to collapse
Oh really? Im on ID (indonesian) ROM, and i never get +1000 point even with cooler attached on geekbench 5, and games like genshin impact is limited to only 40 FPS max, no matter what i do, like putting the phone on refrigerator , turning on performance mode, game turbo set to max every settings, its still limited to 40 FPS max, so i guess xiaomi has some list of apps that they will limit the FPS to avoid overheating issue,,
Can i ask you to play genshin impact and check the FPS ? Does the latest MI (Global) ROM let loose the device performance, meaning there is no limitation on every app? Thanks
So I'm waiting for the unlock counter to go down and figure I want to install this as my first "custom" rom.
However, is it really worth it now that MIUI 13 is around the corner?
Reb0rn said:
So I'm waiting for the unlock counter to go down and figure I want to install this as my first "custom" rom.
However, is it really worth it now that MIUI 13 is around the corner?
Click to expand...
Click to collapse
I have the same dilemma. I like xiaomi.eu roms, but probably I'll wait for MIUI 13 to do a clean installation, not update from MIUI 12. I will lose my data once, not twice. It's always better to do clean installation when you go to newer Android or newer MIUI.
I've tried the Xiaomi.eu ROM, not much difference to the EEA ROM that I could tell, as its based on the Global ROM and the EEA is based on the Global ROM any OS bugs or performance issues are going to be the same between them all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#DroidOnTime
For Galaxy A71
FULLY WORKING
Code:
Your warranty is now void.
* I am not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
dotOS is an Android Rom which focuses on performance and stability. Our aim is to enable a user to extract as much juice as possible and get most out of his/her device. This rom is based on an official GSI, which means it is guaranteed to boot if procedures are done correctly.
CLEAN FLASH is recommended :
Make Sure You Have TWRP 3.6.0 or OrangeFox recovery installed.
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe Data, Cache , Dalvik
Flash the ROM and Kernel (the one linked below)
Flash Magisk (Magisk) This is the only one that works.
Reboot
-----------------------------------------------------------------------BUGS------------------------------------------------------------------------------
- Bluetooth doesn't work, unless you disable force a2dp offload in developer options.
- MTP is still not working.
- SIM 1 incoming and outgoing might not work (try your luck i guess, I hope it works for you)
- People who doesn't follow the instructions carefully still has issues with the ROM not being able to install/boot
- You tell me
Some devices may not be able to boot this ROM. To fix:
(thanks to @Zainullahk1234 for figuring this out)
- install One UI boot into One UI
- change date to 3 months from now
- check for updates (make sure you have internet connection)
- boot into download mode
- flash twrp 3.6.0 or orangefox recovery and vbmeta
- boot into recovery
- do format data
- flash multidisabler
- flash rom
- flash kernel as boot
- do factory reset
- reboot
--------------------------------------------------------------------TWEAKS----------------------------------------------------------------------------
TigerTweaks 4.0
Step 1 - Configuring FDE.AI
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
Step 2 - Ask AI to optimize your system!
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Then, type /extraopt everything and /extraopt. This will optimize your system as best as possible for maximum performance and power saving, and it has a BIG, BIG performance effect, and battery would last longer too.
- Type /extraopt auto. This will optimize your system every 5 AM in the morning. Make sure device is charging and screen is off everytime you sleep!
- Go to the settings tab and use the AUTO settings for FDE AI.
Why not performance? Why not powersave?
Well, by setting the FDE to stick to max performance or power savings at all times, youre missing out the one key advantage that FDE has. Which, the AI can shift between performance and power savings (or even in between depending on the load) in real time. If your phone is on idle, FDE would go into Automatic/Power Saving mode, and if you're playing your favourite game or is doing a heavy task, FDE would go into Automatic/Performance mode. So, you will get performance ONLY when you need it. If your phone is on idle, it would switch fde to powersave, thus saving a ton of battery life!
- Tap on boost heavy games, force doze, and disable throttling.
NOTE: Only disable throttling on NON OC KERNELS! Disabling throttling in OC KERNELS can lead to overheating!
- Good features to keep in mind:
1. /gamelistadd package name
You can add your own heavy game here! For example, if you play war robots, go look at the package name for War Robots, and then enter the package name (for war robots it's com.pixonic.wwr) because your game might not be listed on the heavy games list! Though this is not strictly necessary as FDE AI can detect if you're under heavy GPU/CPU load while playing games, so FDE can adjust to Automatic/Performance which will boost your game, even if it's not included in the heavy games list.
2. /downscale
You can downscale your resolution without having to adjust fiddly DPI settings! The AI would work on everything for you to scale it adaptively, so no risk of soft bricking!
For example:
Downscale 540 for 540p (qHD)
Downscale 720 for 720p (HD)
Downscale 1080 for 1080p (FHD)
Downscale 1440 for 1440p (QHD)
Downscale 2160 for 2160p (4K)
Step 3
- Install GMS doze magisk module. Helps to reduce power consumption of google play services which will increase performance and extend battery life.
Mod Edit: DL link removed.
Recommended Custom Kernel
Gcam: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl61/
apply this config https://www.celsoazevedo.com/files/android/p/f/2021/11/BSG-A71-GV1h.xml
and this LIB https://f.celsoazevedo.com/file/cfiles/gcm1/morgenmanlibv6.so
Note: to get Macro functionality and extra cameras, enable it in phh treble settings - samsung settings.
Get fast charging
to install download from https://drive.google.com/file/d/1KguCeLD-VHShm0MYzKhYrsAv-rZAuJeA/view?usp=sharing
Follow the instructions, and then select 4500ma and 27w. This would make your device charge faster
@faizauthar12 for the Kernel
https://github.com/faizauthar12/android_kernel_samsung_a71 - Kernel source.
@mohancm for releasing and maintaining DotOS.
BSG for Gcam, his config, and Lib
@FeraVolt and @gloeysik for the apps used in TigerTweaks 3.0
before you guys install this rom, read the instructions carefully please.
reserved
reserved
You say mtp is working dude?
Youmeko said:
You say mtp is working dude?
Click to expand...
Click to collapse
apparently it works, until i tried plugging it into some digital camera to transfer files, then it ceases to work
Youmeko said:
You say mtp is working dude?
Click to expand...
Click to collapse
a patch will come soon
TigerLake said:
apparently it works, until i tried plugging it into some digital camera to transfer files, then it ceases to work
Click to expand...
Click to collapse
It support for transfer of files media from laptops PC.
And where is your tiger tweak 4.0?
Fod not working bro .it asking for touch sensor A71 doesn't have back fingerprint sensor lol
fod not working
MariyanGOD said:
fod not working
Click to expand...
Click to collapse
Patch coming later
Youmeko said:
Fod not working bro .it asking for touch sensor A71 doesn't have back fingerprint sensor lol
Click to expand...
Click to collapse
TigerLake said:
Patch coming later
Click to expand...
Click to collapse
when?
MariyanGOD said:
when?
Click to expand...
Click to collapse
After DotOS android 12 is released. Alongside tigertweaks 4.0 and simplified 4.1
MariyanGOD said:
when?
Click to expand...
Click to collapse
just use zaintweaks 3.1 (im releasing 4.0 soon and it will have good battery too!) (as discussed on telegram)
TigerLake said:
After DotOS android 12 is released. Alongside tigertweaks 4.0 and simplified 4.1
Click to expand...
Click to collapse
nice patch that never released lol
already got fix for fingerprint
Zainullahk1234 said:
nice patch that never released lol
already got fix for fingerprint
Click to expand...
Click to collapse
wait really?
Zainullahk1234 said:
nice patch that never released lol
already got fix for fingerprint
Click to expand...
Click to collapse
****'s buggy. I'll wait for android 12 for now.
TigerTweaks 4.0
Step 1 - Configuring FDE.AI
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
Step 2 - Ask AI to optimize your system!
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Then, type /extraopt everything and /extraopt. This will optimize your system as best as possible for maximum performance and power saving, and it has a BIG, BIG performance effect, and battery would last longer too.
- Type /extraopt auto. This will optimize your system every 5 AM in the morning. Make sure device is charging and screen is off everytime you sleep!
- Go to the settings tab and use the AUTO settings for FDE AI.
Why not performance? Why not powersave?
Well, by setting the FDE to stick to max performance or power savings at all times, youre missing out the one key advantage that FDE has. Which, the AI can shift between performance and power savings (or even in between depending on the load) in real time. If your phone is on idle, FDE would go into Automatic/Power Saving mode, and if you're playing your favourite game or is doing a heavy task, FDE would go into Automatic/Performance mode. So, you will get performance ONLY when you need it. If your phone is on idle, it would switch fde to powersave, thus saving a ton of battery life!
- Tap on boost heavy games, force doze, and disable throttling.
NOTE: Only disable throttling on NON OC KERNELS! Disabling throttling in OC KERNELS can lead to overheating!
- Good features to keep in mind:
1. /gamelistadd package name
You can add your own heavy game here! For example, if you play war robots, go look at the package name for War Robots, and then enter the package name (for war robots it's com.pixonic.wwr) because your game might not be listed on the heavy games list! Though this is not strictly necessary as FDE AI can detect if you're under heavy GPU/CPU load while playing games, so FDE can adjust to Automatic/Performance which will boost your game, even if it's not included in the heavy games list.
2. /downscale
You can downscale your resolution without having to adjust fiddly DPI settings! The AI would work on everything for you to scale it adaptively, so no risk of soft bricking!
For example:
Downscale 540 for 540p (qHD)
Downscale 720 for 720p (HD)
Downscale 1080 for 1080p (FHD)
Downscale 1440 for 1440p (QHD)
Downscale 2160 for 2160p (4K)
Step 3
- Install GMS doze magisk module. Helps to reduce power consumption of google play services which will increase performance and extend battery life.