Database Develop

[KERNEL 3.4.106][CM12][T2U] ALPHA Kernel 2.0.3 stable [Discontinued!!!]

ALPHA KERNEL
Praise be to God​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
#include <alpha_std_disclaimer.h>
/*
* i'm not responsible for any dicomfort and hardship faced by you with your phone , by using my works.
*This is purely a development section , great things are made by developing and it surely is a step by step
*process. If you dont like it , i'm aint forcing to install it on your device
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools ,branch =lollipop
Download ALPHA Kernel 2.0.3 (lollipop)-stable
​
Features :
(use Trickster mod kernel to avail some of the features)
-TAP2UNLOCK V3.0
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
- Ram OC to 400mhz from 333mhz and UV upto 50mhz
-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
-Vibrator intensity control (a little bit over volt)
-Alpha governor, intellidemand, intelliactive governor tweaked for moto E.
-exFat ,NTFS , f2fs support.
-little improvements in sound
-zRAM
-dtw/s2w/s2s (fully working )
-cpu-boost
-Quickwake
-Ksm -enabled
-Optimized linaro 4.9(2014.10)
-linux version 3.4.106
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
-frandom
-sysfs to disable kernel logging
-And all other that usual cm kernels include and some minor improvements
​
Instructions :
For T2U :
tap your pattern 1 2 3 4 in the switched off screen (click - you must read this)
1 | 2
-------
3 | 4
-opening it with powerbutton will show u a t2u lockscreen
-You can either input with screen off or on
-You definitely need the app provided for tap2unlock in post no. 2 for version 1.1.0 t2u fix needs 0.6 app from second post
Keeping dt2w/t2u/s2w on may cause sometimes the touch screen to freeze . otherwise there is no freezes
If ur lazy enough to turn ur d2w off during nights like me , keep ur phone facedown during nights for battery's sake
Never turn off intelli plug
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
Tell me if any ...
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
Linux for its open source kernel
Kernel.org for the linux update patches.
percy-g2 and scritch007 for his cm kernel source .
xperiafan for flashable zip help for lollipop.
ashwin007 for some considerable work on cm12 sources.
[email protected]/[email protected] for his open projects.(whenever i have problem i go to his threads)
[email protected] (for his open projects)
savoca for porting sound control to msm8610 and his awesome lcd kcal
faux123 for almost every feature in the kernel thats implemented by him.
[email protected] for usb mouse keyboard.
-
Developing a custom kernel requires high commitment and hardwork , if not a donation , press thanks ,that encourages
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: Stable
Current Stable Version: v 1.0.2
Stable Release Date: 2014-12-14
Created 2014-11-12
Last Updated 2014-12-18
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Percy-g2,Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: No Longer Updated
Current Stable Version: v 2.0.3
Stable Release Date: 2015-03-15
Created 2014-11-12
Last Updated 2015-04-26

Reserved
Application for T2u control : (current version is 0.5)
You need 0.6 app for alpha kernel v1.1.0
Click here
The applications is updated to v 0.6
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video description : for tap 2 unlock v1.0 only you need the application for above versions

Changelogs
https://github.com/goutamniwas/android_kernel_motorola_msm8610/commits/lollipop
or
Code:
version 2.0.3
-Update linux kernel version to 3.4.106
-Implement motorola's lollipop changes for F2FS
version 2.0.2
-Fix screen freeze atleast for non uers of screen wake features like t2u,dt2w,s2w(need report)
-attempts to fix screen freezes on the whole
version 2.0.1
-Fix auto rotation
version 2.0
-lollipop support (Thanks to percy and scritch 007)
version 1.1.0
-Reclaim some RAM from loggers
-Try fixing intellidemand
-Merge lots of commits from percy-g2
-Including lcd kcal (untested) - many thanks to [email protected]
-Increase battery level check interval.
-Make lzo compression very fast with unaligned access
-Make btrfs and ext4 partition much faster by making context readahead more conservative
-Suspend: enable freeze timeout configuration through sysfs (faster deep sleep)
-int_sqrt: Improve 3x faster integer sqrt. (faster cpu computations)
-Update t2u version to 3.0 stable (t2u is stable , reliable and secure now)
version 1.0.2 t2u fix
-Fix t2u switch not standing after boot(to me it does -need report)
-Now no touch freeze during incoming or outgoing calls whatsoever
version 1.0.2
-All changes of t2u v2.0
-T2u app updated for t2u 2.0
-Incoming call is now allowed without entering pin
vesion 1.0.1
-make t2u absolutely flawless with better algorithm
-t2u now checks the time gap btw 2 knocks (max = 0.6s)
-fix the init.d not working problem (check if the init.d/77AlphakernelConf has rwx-rx-rx and user root group shell)
-fix the autorotate bug caused by 1.0
version 1.0
-New Tap2Unlock 1.0(wip)( http://forum.xda-developers.com/android/software-hacking/kernel-tap2unlock-tap2wake-feature-t2965344)
-upgrade linux to 3.4.105
-fix force usb fast charge
-working init.d script to set default settings on boot time (init.d/77AlphakernelConf)
version 1.0 prerelease
-Allow aac audio recording at 320 kbps
-Video recording to 960x540(24fps ) bit rate increased(no way related to kernel alone)+audio rec aac format(256kbps)(kernel oriented)
-power efficient workqueues
-exFat and NTFS support
-Implement intelliactive governor
-Remove usage of swp which is deprecated
-Fix some warnings
-D2w is disabled by default
-Mp-decisions is removed
version 0.9
-compile with linaro 4.9(2014.10)
-Implement Intellidemand 5.5 governor replacing the buggy ondemand and make it appropriate for moto e
-Ability to use the phone as keyboard or mouse
-Implement Usb Force Fast charge
-lowmemory killer moves to kill the next task when sigkill takes time instead of killing the same
process over and over
-Implement powersuspend in wlan also
-Some code structure improvements in ext4 (refer gits)
version 0.8
-Backport 'random' updates from kernel 3.13 rc1
-Added frandom support
-Use more random in hwrng
-Pulled some lollipop references from percy-g2
-More efforts on power conservation
-Sysfs to disable logging
version 0.7(big update)
-linux version 3.4.104 patch from kernel.org
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
version 0.6
-Fix intelli plug update it to 3.8 (Thanks to [email protected] and [email protected])
(this also seems to have fixed the screen freeze issue during wakeup -to my knowledge)
version 0.5
-Intelli hot plug v.3.7 for better battery performance
-Ksm enabled
-sysfs for zRam added
version 0.4
-Add Intelli thermal v2 as thermal manager instead of msm thermal manager.
-Added Alpha governor based on smartass v2.
-Added Interactive,performance gov back.
-Implement support for Sound control v3.4
-Make some frequencies of gpu and ram to right values
-Remove unwanted led flash drivers
-gpu freq oc changed to 450mhz
-Enable Quickwake
version 0.3
-fixed auto rotate
version 0.2
-fixed dtw/s2w completely

is this limited to cm11 only???

AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
Dont have aosp , theoretically it should work , u can try and report

goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
If percy's tree was used as base.....it will surely work.....btw good work

Is this work on carbon rom...
Sent from my XT1022 using XDA Premium 4 mobile app

goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
WiFi driver is not working..

AshuGite said:
WiFi driver is not working..
Click to expand...
Click to collapse
I see it working , what do u mean by wifi driver ? i could use hotspot

goutamniwas said:
I see it working , what do u mean by wifi driver ? i could use hotspot
Click to expand...
Click to collapse
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...

AshuGite said:
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...
Click to expand...
Click to collapse
custom settings need to be reapplied after every boot.

goutamniwas said:
ALPHA KERNEL
Praise be to God​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools
ALPHA 0.1 Flashable zip download​
Features :(use Trickster mod kernel to avail some of the features)
- Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
-cpu underclock upto 91mhz (good battery life)
-vibrator intensity control (a little bit over volt)
-little improvements in sound
-zRAM
-s2s (works well)
-dtw/s2w (wip)
-Optimized linaro 4.9
-And all other that usual cm kernels include and some minor improvements
Instructions :
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
s2w/dtw is a wip , its working but sometimes not
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
percy-g2 for his cm kernel source
-
Click to expand...
Click to collapse
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk

DAVI FELICIANO said:
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk
Click to expand...
Click to collapse
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?

marceloterorist said:
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?
Click to expand...
Click to collapse
Before you install it make a backup of your current boot IMG in recovery and when you want to revert to old one just restore it.
Sent from my XT1022 using XDA Free mobile app
---------- Post added at 04:35 AM ---------- Previous post was at 03:48 AM ----------
Test results when flashed on cr droid fresh install, moto e xt1022
Sweep to wake,Double tap to wake sometimes works and sometimes does not as said by op
Auto rotate not working
WiFi works fine no problems
Bluetooth,Mobile network works fine
90mhz working
Logs---> http://d-h.st/Lln
Thanks
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
@SidDev said:
custom settings need to be reapplied after every boot.
Click to expand...
Click to collapse
No need to reapply after every boot , in trickster mod set it on boot and it will be automatically applied on boot

updated
s2w/dtw fully fixed

s2w/dtw works well with pac now.

goutamniwas said:
s2w/dtw fully fixed
Click to expand...
Click to collapse
Thanks for the fix and is auto rotate bug fixed?

Prashanth Meesara: said:
Thanks for the fix and is auto rotate bug fixed?
Click to expand...
Click to collapse
no not yet...

AshuGite said:
no not yet...
Click to expand...
Click to collapse
Okay , thanks for reply
Sent from my XT1022 using XDA Free mobile app

update
auto rotate fixed
for developers :
if u use my repo
add in ramdisk to init.rc
Code:
chown system system /sys/class/input/event3/device/device/enable
There wasnt enough permission set for auto rotate to be enabled

[KERNEL][3.10.45] Sandy Kernel V1.2 { Faux features } { Linaro 4.9 }

Sandy Kernel V1.2 for Yu Yureka​
Hi users !
I am keeping short and writing the features i have added so far !
CREDITS :
The Kernel master faux123 for his kernel features & works on many devices. Kindly support him by downloading his app from the playstore. This app is recommended to use his features well.
Faux kernel app :
Faux Kernel Enhancement app
FEATURES :
Changelogs:
V1.2
Intelliplug 4.0 ( Adds performance boost and other changes )
High load average fix up ( Brings load to zero at idle time )
MIUI support
V1.1
FIOPS scheduler added
Linaro 4.9.3 toolchain ( Jan 2015 toolchain )
Kernel upstreamed to 3.10.45
Neon support
Performance enhancements
Intellithermal disabled ( Not yet suiting this device )
V1.0
Compiled with Linaro gcc 4.9 toolchain with cortex a15 optimized
Intelliplug 3.9 ( An intelligent hotlplug driver by faux )
Intellithermal 3.0
Power suspend ( new PM kernel driver for Android w/o early_suspend . This replaces the existing early suspend driver )
Dynamic Fsync control
Simple GPU algorithm
Encryption enhancements
Other feature requests are welcomed and if it's upto my knowledge i will try adding them and compile
Note to use Kernel features :
* To use features like intelliplug kindly download Faux kernel enhancement app or Trickster Mod app and under Kernel features enable them, apply and set on boot.
FLASHING INSTRUCTIONS : ( Read carefully )
METHOD 1 :
1.Unlock your bootloader. You can find the guide here by @vishal_android_freak
2. Boot your phone into fastboot mode.
3. Then type this command fastboot -i 0x1ebf flash boot boot_sandystk.img
4. Reboot to recovery and enjoy.
METHOD 2 :
This method is applicable if you are rooted
1. Copy the kernel ( boot.img) to SD card
2. Download Flashify tool from playstore
3. Choose install boot image and choose boot image via file manager.
4. Choose flash and reboot. Enjoy !
DOWNLOADS :
V1.2
Sandy Kernel v1.2
V1.1
Sandy Kernel v1.1
V1.0
Sandykernel v1.0
NOTE : I nor xda is responsible for any of the problems caused to your phone
SOURCE :
Kernel source
XDA:DevDB Information
[KERNEL][3.10.45] Sandy Kernel V1.2 { Faux features } { Linaro 4.9 }, Kernel for the YU Yureka
Contributors
Santhosh M
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.2
Stable Release Date: 2015-03-12
Created 2015-01-19
Last Updated 2015-03-12

Great to see new ROMs ! Cheers.

First kernel For our yu Yureka

alpha.shining said:
Great to see new ROMs ! Cheers.
Click to expand...
Click to collapse
This is not a Rom,
its a Kernel.

RASTAVIPER said:
This is not a Rom,
its a Kernel.
Click to expand...
Click to collapse
Oops. my mistake.
Both of them are the great efforts of developers. Cheers!

@Santhosh M & @faux123 great work :good:
waiting for more ...... faux sound and gamma controls FIOPS io scheduler Full disk encryption enhancements
moar & moar .......

sooorajjj said:
@Santhosh M & @faux123 great work :good:
waiting for more ...... faux sound and gamma controls FIOPS io scheduler Full disk encryption enhancements
moar & moar .......
Click to expand...
Click to collapse
Faux sound i am not sure. I built one sday. Have to test it if it actually works. That real feature of it will come good if faux directly works on the device and compiles. FIOPS i will try today

@Santhosh M & @faux123
We Need this for Feature in our Yu Yureka
Usb Fast charge
Ecomode (more battery saving)
F2FS,NTFS,exFAT Support
Frandom
Turned off many debug and logging option
Lz4 compressed kernel and RamDisk for faster boot
Audio call recording support
Power Suspend Driver (replacing deprecated Early Suspend)
Auto junk clean stored in Cache and Data
Reduced Logger RAM usag
NEON: NEON-accelerated XOR framework & support for NEON instructions in kernel mode
sysfs to disable kernel logging
Kexec hardboot
Dynamic FSYNC,Dynamic Writeback,Dynamic Cache Pressure,Dynamic Readahead
we need Improved battery consuming. More than 50% less in deepsleep.
Sweep2Wake, Sweep2Sleep
Take Your own Time Bro

Santhosh M said:
Faux sound i am not sure. I built one sday. Have to test it if it actually works. That real feature of it will come good if faux directly works on the device and compiles. FIOPS i will try today
Click to expand...
Click to collapse
you might wanna take a look at here
CAF kernel synced with latest LP tag
maybe re-base all your commits on this

ela1103 said:
@Santhosh M & @faux123
We Need this for Feature in our Yu Yureka
Usb Fast charge
Ecomode (more battery saving)
F2FS,NTFS,exFAT Support
Frandom
Turned off many debug and logging option
Lz4 compressed kernel and RamDisk for faster boot
Audio call recording support
Power Suspend Driver (replacing deprecated Early Suspend)
Auto junk clean stored in Cache and Data
Reduced Logger RAM usag
NEON: NEON-accelerated XOR framework & support for NEON instructions in kernel mode
sysfs to disable kernel logging
Kexec hardboot
Dynamic FSYNC,Dynamic Writeback,Dynamic Cache Pressure,Dynamic Readahead
we need Improved battery consuming. More than 50% less in deepsleep.
Sweep2Wake, Sweep2Sleep
Take Your own Time Bro
Click to expand...
Click to collapse
I think you have copy pasted from somewhere. Some of things u mentioned all already there ( Like powersuspend, d.fsync and some more ). Doubletap to wake is already there in the stock kernel. Not sure why u need sweep. ( You should try the kernel and report if u felt any difference or if it is bad )
Regards
Santhosh

sooorajjj said:
you might wanna take a look at here
CAF kernel synced with latest LP tag
maybe re-base all your commits on this
Click to expand...
Click to collapse
Ya I have seen that

Santhosh M said:
Ya I have seen that
Click to expand...
Click to collapse
i just went through your kernel commits ... man you have missed few updates from original cm kernel
Touch screen and sensor updates from yulong commited by intervigilium
https://github.com/YU-YUREKA/androi...mmit/a209bdc1a2a03c417ae030d91b02c39c0cc478bf
https://github.com/YU-YUREKA/androi...mmit/a209bdc1a2a03c417ae030d91b02c39c0cc478bf
just fix em up if it was unintentional
Code:
git fetch git://github.com/YU-YUREKA/android_kernel_yu_msm8916.git
git cherry-pick 313a5fc38c7910b670e1cb62bd163b3e13122a97 a209bdc1a2a03c417ae030d91b02c39c0cc478bf
:good:

sooorajjj said:
i just went through your kernel commits ... man you have missed few updates from original cm kernel
Touch screen and sensor updates from yulong commited by intervigilium
https://github.com/YU-YUREKA/androi...mmit/a209bdc1a2a03c417ae030d91b02c39c0cc478bf
https://github.com/YU-YUREKA/androi...mmit/a209bdc1a2a03c417ae030d91b02c39c0cc478bf
just fix em up if it was unintentional
Code:
git fetch git://github.com/YU-YUREKA/android_kernel_yu_msm8916.git
git cherry-pick 313a5fc38c7910b670e1cb62bd163b3e13122a97 a209bdc1a2a03c417ae030d91b02c39c0cc478bf
:good:
Click to expand...
Click to collapse
I synced the kernel what was put on the first day of release. After that I didnt update any. For me everything is working. ( No problems on touch or led. At least for me ! ).
Regards
Santhosh

Santhosh M said:
I synced the kernel what was put on the first day of release. After that I didnt update any. For me everything is working. ( No problems on touch or led. At least for me ! ).
Regards
Santhosh
Click to expand...
Click to collapse
lol..... its updates ..... everything will work
anyways its up to if u wanna patch it or not

Santhosh M said:
I think you have copy pasted from somewhere. Some of things u mentioned all already there ( Like powersuspend, d.fsync and some more ). Doubletap to wake is already there in the stock kernel. Not sure why u need sweep. ( You should try the kernel and report if u felt any difference or if it is bad )
Regards
Santhosh
Click to expand...
Click to collapse
Iam not copy paste somewhere ok .iam post this in yu forum also ok .sry i cant see double tape 2 wake ok .ssweep to wake or sweep to sleep is better than the double tap to wake or sleep function because the phone goes to deepsleep ok

ela1103 said:
Iam not copy paste somewhere ok .iam post this in yu forum also ok .sry i cant see double tape 2 wake ok .ssweep to wake or sweep to sleep is better than the double tap to wake or sleep function because the phone goes to deepsleep ok
Click to expand...
Click to collapse
@ela1103 , Please Dont Argue... and @Santosh M was meaning S2W not S2S.. so read before posting anything properly... And Please dont quarrel with @Santosh M... or it is better you build a kernel for yoursel with your own tweaks
Regards
Andy

Small update
Dear users,
The first build that i uploaded has a small mistake as 2 of the features i had mentioned in the OP were not in the kernel. ( I had wrongly uploaded the build ). I have now updated it with the correct one. Users are requested to use the new build
Link updated in OP
Thanks
Santhosh

Thanks for the kernel Does it improve battery life?

VCH04 said:
Thanks for the kernel Does it improve battery life?
Click to expand...
Click to collapse
You will have to try that and report back in the thread !

@Santhosh M, will you please update kernel with latest CyanogenMod commits ?
I am getting my device soon and then flash your kernel.

[MM-KERNEL][UC][F2FS] Project T for MM [STOCK ROM ONLY]

Hello again,
This is my work on the stock Marshmallow Kernel for Zenfone 2, based on the officially released ZF2 kernel source code.
Please note that I do my testing on a ZE551ML 4GB 2,3GHz
Note: This kernel works ONLY on stock based versions!​
Features:
Based on Zenfone 2 V4.21.40.184 kernel source (completely from scratch)
Built with gcc4.9 toolchain
UC to 333MHz
Touchboost input event handler
Added the following CPU governors:
- Lionheart
- Bioshock
- Yankactive
- TheSSJactive (Yankactive with hotplugging)
Added IO schedulers:
- sio
- zen
- vr
- fifo
- sioplus (credits to @boype, fixed afterwards for zf2 by me)
- fiops
- working ROW scheduler!!!
- deadline
Added TCP congestion algorithms:
-BIC
-CUBIC
-WESTWOOD
-HSTCP
-HYBLA
-HTCP
-VEGAS
-VENO
-SCALABLE
-LP
-YEAH
-ILLINOIS
Approx. 30% faster due to CRC disabling and auditing
Power efficient Work queues
Powersuspend
Dynamic FSync
Set minimum brightness to 2 instead of 15 percent (changeable via kernel adiutor, please set it to 1 there, otherwise your screen is pretty much black)
exfat support (no fuse, all credits to @Dorimanx, automounting of devices fixed by @sorg)
Sweep2Sleep (all credits to Lord Boeffla)
frandom RNG
F2FS support
ZRAM
WLAN Wakelock reducer
More to come:
Init.d
If I should find the time also:
BLX
A separate KVM build
Compiling with another Toolchain
How to install:
1st pre-requisite: Unlock your Bootloader
2nd pre-requisite: Use the stock Marshmallow ROM ;-)
3rd pre-requisite: BACKUP!!!
Download the flashable anykernel zip here:
Drive
Flash it via TWRP and reboot. The Anykernel zip preserves whatever modification you already have (xposed, root,...) and just replaces the needed parts :good:
Credits:
@jrior001, @crpalmer, @jamison904, @tectas, @dorimanx, @Lord Boeflla, @say99​
XDA:DevDB Information
[MM-KERNEL][UC][F2FS] Project T for MM [STOCK ROM ONLY], Kernel for the Asus ZenFone 2
Contributors
TheSSJ
Source Code: https://github.com/TheSSJ/zf2_mmkernel
Kernel Special Features: F2FS, more governors, underclocked, more IO schedulers, westwood TCP cong
Version Information
Status: Stable
Current Stable Version: 1.5
Stable Release Date: 2016-11-25
Created 2016-09-09
Last Updated 2016-12-08

Reserved
Changelog:
25-11-2016 v1.5
- Updated to latest kernel version from Asus Website (.184)
23-09-2016 v1.4
- backlight is configurable again (super simple patch)
- Mechanism to avoid entropy depleting (aka generating random numbers as needed)
20-09-2016 v1.3
- set brightness to the minimum possible before the screen goes off
- restrict user space apps to modify the min_brightness node, Kernel adiutor cannot mess around anymore with it
- increase speed of mathematical operations
18-09-2016 v1.2
- Fixed deep sleep issue and camera problems
18-09-2016 v1.0 & 1.1
- Implemented WLAN wakelock divider (configurable in KA)
- Enabled Deadline IO scheduler
- Increased performance by approx. 30% (according to the rumors)
- GPU: Set default frequency to 266MHz
- Should automount cache and data depending if ext4 or f2fs
17-09-2016 v0.6
- Enabled video driver of z008, should work now
- Built-in wireless driver instead of a module
- Fixed urgent request handling in row scheduler
- set ROW as default IO sched
Older releases:
16-09-2016 v0.5
- Failed build while trying to reduce modules to 0
13-09-2016 v0.4
- Updated to latest ASUS source code (V4.21.40.134)
- Added configurable LED blink rate (check Kernel Adiutor! Thanks to @crpalmer for the implementation and @say99 for pulling this to the source)
- Dynamic FSync turned on by default
- Updated Powersuspend driver to 1.7
- Increased readahead for memory handling (this has nothing to do with reading from int./ext. storage)
- Updated Block-system to support urgent request handling (pre-requisite to get the ROW scheduler working)
- Added working row IO scheduler
12-09-2016 v0.3
- power efficient work queues
- added quick wakeup driver (improves deep sleep)
- under the hood Improvements
11-09-2016 v0.2
- added powersuspend driver
- added dynamic fsync
- working Anykernel zip system!
09-09-2016 v0.1
Initial build flashable with Anykernel system
- UC
- More governors
- More IOSchedulers
- F2FS
- exFAT support
- Sweep2Sleep
- Touchboost working for Thessjactive and Yankactive

Reserved
Any bugs? Tell me about your current phone setup and describe the problem!

Project T, reborn! It's incredible to see this project alive agan!
@TheSSJ, about F2FS: it supports mixed setups (F2FS /data and ext4 /system and /cache) or only F2FS-all setups?

I love you
---------- Post added at 10:50 AM ---------- Previous post was at 09:59 AM ----------
@TheSSJ
For some reason, after flashing, the kernel does not install.
I reboot to twrp, dirty flash WW134 ROM, flash supersu, flash xposed, flash twrp and flash this kernel. Wipe cache and d.cache.
Reboot and it stock kernel.
I tried 2nd time. Flash kernel in twrp and it still stock kernel.

@TheSSJ
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!

Carlos6862 said:
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!
Click to expand...
Click to collapse
Same issue here

Good job:good:
Z008 support???

Carlos6862 said:
My friend @TheSSJ
Thanks for your kernel.....
I flashed it , but when i reboot, my kernel is stock... Flash again and same stock kernel.
Regards!!
Click to expand...
Click to collapse
same here. I was on borets kernel, and it keeps.

Thats bad..will look into it later to see what went wrong...thx for the feedback

wow great

Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then

TheSSJ said:
Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then
Click to expand...
Click to collapse
Thanks! downloading...
EDIT:
After flashing the kernel the system became unbootable. It boots into recovery after "reboot system".

Dan_Jacques said:
Thanks! downloading...
EDIT:
After flashing the kernel the system became unbootable. It boots into recovery after "reboot system".
Click to expand...
Click to collapse
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...

TheSSJ said:
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...
Click to expand...
Click to collapse
My friend @TheSSJ
my phone boot up with your great kernel......First, I did a wipe cache and dalvik and then flash your kernel. Thanks again!!
Regards!!!

Carlos6862 said:
My friend @TheSSJ
my phone boot up with your great kernel......First, I did a wipe cache and dalvik and then flash your kernel. Thanks again!!
Regards!!!
Click to expand...
Click to collapse
Hello. Do you have xposed?
Thanks in advance.
---------- Post added at 08:07 AM ---------- Previous post was at 08:06 AM ----------
TheSSJ said:
Cool it everyone, I think it's just a misunderstanding
I have uploaded a flashable zip for now as Anykernel doesn't work as I want it to work ^^
At the moment this can be only flashed by people
WITH root and
WITHOUT xposed
After flashing the kernel, then you can re-flash xposed, this should work then
Click to expand...
Click to collapse
Ok cool down.
Thanks master. Let me try.

Tiongkia said:
Hello. Do you have xposed?
Thanks in advance.
---------- Post added at 08:07 AM ---------- Previous post was at 08:06 AM ----------
Ok cool down.
Thanks master. Let me try.
Click to expand...
Click to collapse
No my friend @Tiongkia! Without xposed.
I lost it, when flash the kernel.
Regards!! ? ?

Carlos6862 said:
No my friend @Tiongkia! Without xposed.
I lost it, when flash the kernel.
Regards!! �� ��
Click to expand...
Click to collapse
Yes, i tired. Same results. Xposed don't work.
Thanks buddy

TheSSJ said:
Okay, did you have xposed installed? Could you please try to remove xposed and just flash the kernel without it? This Anykernel thing seems to be the only available option...
Click to expand...
Click to collapse
do we have a plan to break xposed?? [emoji14]
anyways I will try looking into any kernel, since I really prefer it over doing mess with ramdisk [emoji14]
Sent from my ASUS_Z00A using Tapatalk

say99 said:
do we have a plan to break xposed?? [emoji14]
anyways I will try looking into any kernel, since I really prefer it over doing mess with ramdisk [emoji14]
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Maybe I'm being paid to break xposed
I just need to take the time to see where the script goes wrong (by the way,I took your anykernel as base :laugh: )
Will test it line by line on my linux machine today :good:

[Kernel][8.1 Oreo][MARKW][Stable] Voodoo 13+

/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Hello, this kernel is for aosp/caf ROMS so no miui,
Our Telegram Chat group:
tg://join?invite=GIipsxIDOQxumb-ayOOrvQ
there you can come directly in contact with me.
Since my device got bricked, i finnished V3 to make my kernel oreo compatible and wish you a good time,
with my kernel and the Rom your choosing.
I will further support my kernel but i will not work on it (beside bugs) until i have a device
================================================== ==================================================
Voodoo is meant to give you great battery life and performance (depending on how you tune it , more on that later in the second post), essentially I tried to optimize it for everyday usage (gaming, media consumption. browsing the web, all that stuff), I'm not aiming to have the highest Antutu score (although it is very high, it's just not my focus), you see benchmarks don't really reflect actual everyday usage.
The main thing that I do is port good features and optimizations from the various OnePlus 3/3t kernels (they have many great kernel devs and a lot of their work can benefit us too), I also optimize the kernel settings and stuff like that
Its builded with Linaro Toolchain.
It is based off of the lineage kernel with tons of improvements from @mosimchah, and @Razziell for the base of this kernel. .
try it and report. (Interactive can lag on first time display is touch its because battery saving options, but not lag further than)
Here are some of the features
(check out the third, and fourth posts for more info)
Compiled with Linaro 7.2.x Toolchain a56 optimized
Linux version 3.18.89
Android 8.0 Oreo support
CAF tag 'LA.UM.5.6.r1-06500-89xx.0 (latest aurora)
CPU:
impulse governor (best Battery i think)
blu_active (best balance)
Relaxed
Chill
Optional overclock (-OC kernel)
GPU:
Adreno boost
Adreno idler
Screen
kcal
Backlight dimmer
I/O:
Improved deadline
improved cfq
bfq
sio
fiops
tripndroid
sioplus
zen
maple (default)
Virtual memory:
various optimizations
zram
zswap
ksm
entropy:
some optimizations
tcp-algorithms:
westwood
Misc:
Vibration Control
dynamic fsync toggle
Many more optimizations
Several wakelocks have been blocked
Added the ability to tweak the thermal throttle settings for the CPU (be very careful with this)
USB fast charge
faster unlock
improved network performance
Option to enable the disabled gentle fair sleepers
Option to enable software crc control
DONATE for a some coffee
Download Link
Mod edit, links removed.​
Thanks to:
Razziell
darkobas and lineage for the amazing base and continued work on it
Sultan
Franco
dabug123
GalaticStryder
The Flash
There are many more
XDA:DevDB Information
Voodoo, Kernel for the Xiaomi Redmi 4 Prime
Contributors
unterwelt
Source Code: [url]https://github.com/unterwelt/android_kernel_xiaomi_msm8953[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V7
Stable Release Date: 2017-11-30
Created 2017-09-24
Last Updated 2018-06-12

This is a work in progress guide to getting great battery life
Note: This guide is meant to be used on my kernel, there's several optimizations that I've left out of this guide because I enabled them by default in my kernel
1. In kernel adiutor, in the CPU section, change the cpu governor to impulse
2. Go to the governor tunables, and set the powersave_bias to 1 (warning, setting it to 1 can cause a lot of lag)
3. Underclock the cores to 1804Mhz
4. Set the GPU governor to simple_ondemand
5. Set the vibration strength to zero (or close to zero) in the misc section
6. Set the default I/O scheduler to noop
7. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports, and to pass safety net)
8. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
10. Turn off all animations in developer options
11. In kernel adiutor set the low memory killer values to the aggressive setting
12. Disable fsync (risky, you could lose data if the system crashes)
================================================== ================================================== ================================================== ================================================== ==========
This is a work in progress guide to getting great Performance at the expense of battery life
Note: This guide is meant to be used on my kernel, there's several optimizations that I've left out of this guide because I enabled them by default in my kernel
1. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports)
2. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
3. Turn off all animations in developer options
4. Overclock the cores to 2208mhz
5. Disable fsync (risky, you could lose data if the system crashes)
6. Enable ksm, and use zram for more free ram, good for gaming
7. Set the CPU governor to blu_active

More infos? Check out these guy(helped me alot) third post has good infos about the governors.
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976/

Yeahhhhhh

I do not have a wifi connection (lineage 20170904)

unterwelt said:
More infos? Check out these guy(helped me alot) third post has good infos about the governors.
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976/
Click to expand...
Click to collapse
You say the kernel version is up to 3.18.71 but your source and its branches did not reflect that. Please upload YOUR OWN changes as well as per GPL guidelines.

Kernel is uploaded

Custom kernel for miui would be great
Odoslané z Redmi 4 pomocou Tapatalku

domino2115 said:
Custom kernel for miui would be great
Odoslané z Redmi 4 pomocou Tapatalku
Click to expand...
Click to collapse
Use validos and this kernel. Try it and you will not need miui

unterwelt said:
4. Overclock the cores to 2208mhz
Click to expand...
Click to collapse
How to get overclock? I coulndt find mentioned core clock in kernel adiutor

aldirudianto said:
How to get overclock? I coulndt find mentioned core clock in kernel adiutor
Click to expand...
Click to collapse
Dont Quote the whole thread. It is for the experinental build upload it later im not at home.
@manulais i know your rom is too old, update it please. (Vendor is not uptodate)

unterwelt said:
Kernel is uploaded
Click to expand...
Click to collapse
So where's the commit history? How do we know you aren't hiding anything malicious?
All anyone can see is one large commit that says "first". Why are you doing this?
What are you hiding?

FaustTN said:
So where's the commit history? How do we know you aren't hiding anything malicious?
All anyone can see is one large commit that says "first". Why are you doing this?
What are you hiding?
Click to expand...
Click to collapse
Source code is opend. I update it later to v1.1 look into it. Trust me or not source code is opend thats what you (xda) wanted and now its not right? Your Problem look into source. But thanks for your hardwork really helped me alot.

unterwelt said:
Source code is opend. I update it later to v1.1 look into it. Trust me or not source code is opend thats what you (xda) wanted and now its not right? Your Problem look into source. But thanks for your hardwork really helped me alot.
Click to expand...
Click to collapse
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.

FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Well i can sync your source from mido and sync my source and you had all your commits and my changes. Sry for bothering you

FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Sorry to hear that. This farce is working very good and bug-free.

thomasginn said:
Sorry to hear that. This farce is working very good and bug-free.
Click to expand...
Click to collapse
+1 this kernel working great, on crDroid 7.1.2

+1 great kernel, great dev.

FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Calm your Tits, he is contributing just like you.

Thank you for your hardwork,seems quite well-developed and I'm going to test it during this week,would you please tell me what do you think about all these optimizations added to this kernel https://forum.xda-developers.com/on...m13-x-cm14-x-ab123321-kernel-oneplus-t3545468 ?
Excuse me @unterwelt should I consider your absent reply as a "I don't about your suggestion because by my mind it's useless"

[KERNEL][7.0][J530F] FlareKernel_Reborn V.1

Welcome to FlareKernel Reborn
The reborn of FlareKernel !
Code:
[CENTER]/*
* Your warranty is now void
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it ! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/[/CENTER]
Features :
- Build with latest UBERTC GCC 4.9 toolchain under Ubuntu 16.04.4 LTS
- Based on latest J530FXXU2ARA2 (ARB3 ramdisk)
- Deknoxed
- Fake enforcing
- Full SafetyNet bypass
- TCP window set to 64K (better network performances)
- Optimized for speed instead of size (kernel will be bigger but faster)
- CRC disabled by default (~30% perf. boost)
- Undervolt CPU (less heating, better battery life)
- Arch Power
- UKSM 0.1.2.3
- Disabled KNOX, TIMA and DM_VERITY
- GPU OC up to 1001 Mhz instead of 728 Mhz
- GPU undervolt (less heating, like CPU)
- Reduced timings for MMC
- Deadline I/O sched. by default
- Fsync toggle
- Many other performances, battery life optimization
- I forgot (check Github)
How to install :
- MAKE FULL BACKUP
- Download FlareKernel_V1.zip
- Copy it to your internal/external storage
- Flash it as zip throught the latest TWRP
- Flash Magisk (optional but recommended)
- Reboot and enjoy
- OPTIONAL : Use MTweaks in order to use all FlareKernel features
Download / Changelog / Informations below
​
GitHub source : [url]https://github.com/SharkEzz/FlareKernel[/URL]

Download & Changelog
Download :
FlareKernel V.1 :
Deknoxed
Fake enforcing
Full SafetyNet bypass
TCP window set to 64K (better network performances)
Optimized for speed instead of size (kernel will be bigger but faster)
CRC disabled by default (~30% perf. boost)
Undervolt CPU (less heating, better battery life)
Arch Power
UKSM 0.1.2.3
Disabled KNOX, TIMA and DM_VERITY
GPU OC up to 1001 Mhz instead of 728 Mhz
GPU undervolt (less heating, like CPU)
Reduced timings for MMC
Deadline I/O sched. by default
Fsync toggle
Many other performances, battery life optimization
Download : https://www.androidfilehost.com/?w=files&flid=262415

Coming soon :
Wakelock blocker
More CPU governors
More I/O schedulers
Upstream
More optimizations
All other J5 2017 models supported
And many more
Stay tuned by checking the Github repo !

Any chance of getting AOD embedded in your kernel ? Thanks

djedjy said:
Any chance of getting AOD embedded in your kernel ? Thanks
Click to expand...
Click to collapse
At the moment no, we have a screen flicker issue which can damage the screen when whe try to use AOD.

SharkEzz said:
At the moment no, we have a screen flicker issue which can damage the screen when whe try to use AOD.
Click to expand...
Click to collapse
It works with Lineage 15.1? Thanks.

xabby666 said:
It works with Lineage 15.1? Thaks.
Click to expand...
Click to collapse
No it's only for stock TouchWiz

Undervolt is setted by default?

Does it work on J7 pro (2017)?

wetito said:
Undervolt is setted by default?
Click to expand...
Click to collapse
Yes you can't change CPU voltage ATM
Greight said:
Does it work on J7 pro (2017)?
Click to expand...
Click to collapse
Only J5 for now, will add J7 support as soon I have testers

The kernel is good but wifi don't work properly. Is difficult to explain but i try. The first time i connect to wifi all seems ok. But if i disconnect e then recconnect, no wifi networks detect. After retry to recconnect. See all networks, connection ok but lost any configurations that i nade the first time (password, dns, ecc). Sorry for my english, i hope you undestand

wetito said:
The kernel is good but wifi don't work properly. Is difficult to explain but i try. The first time i connect to wifi all seems ok. But if i disconnect e then recconnect, no wifi networks detect. After retry to recconnect. See all networks, connection ok but lost any configurations that i nade the first time (password, dns, ecc). Sorry for my english, i hope you undestand
Click to expand...
Click to collapse
Yes I noticed this problem it will be fixed in next release !

There's also a problem with Bluetooth not turning on until I reset network settings. That works for a while then after some time phone crushes and after reboot the problem come back again.

drjacek14 said:
There's also a problem with Bluetooth not turning on until I reset network settings. That works for a while then after some time phone crushes and after reboot the problem come back again.
Click to expand...
Click to collapse
Thanks for the report, the issue will be fixed in future releases !

Hey just a quick update !
The V2 release will be delayed a little since I'm working on AOSP right now.

SharkEzz said:
Hey just a quick update !
The V2 release will be delayed a little since I'm working on AOSP right now.
Click to expand...
Click to collapse
Good news!

SharkEzz said:
Hey just a quick update !
The V2 release will be delayed a little since I'm working on AOSP right now.
Click to expand...
Click to collapse
Great. Thank You. Aosp base on an Aosp Version of FlareKernel?

xabby666 said:
Great. Thank You. Aosp base on an Aosp Version of FlareKernel?
Click to expand...
Click to collapse
At the moment no but later surely !