i'm totally newbie using xperia z rooted with unlocked bootloader , few weeks ago i can access recovery but yesterday i cant access recovery (blank screen; LED = green)..
trying to flash using flashtools (originally from Sony website) so maybe i can rolled back my phone into factory default ROM n etc then follow the steps but "EMMA" can't find any service.
Anyway, my xperia Z works fine but i want to upgrade my JellyBam to 10.3 ver. or if it cant, i want to rolled back my phone into factory (no custom ROM)...
anyone can help me?
Do you use XZDualRecovery or the install with UB(flashing boot.img)?
If XZDualRecovery, Try reinstalling.
If boot.img, reflash it.
Sent from my Dualbooted XZ
Hi i have a problem with my xperia sp 4 days ago i unlocked the bootloader and installed a custom rom (cm 11 huashan ) then i decided to flash the new cm12 rom (huashan) i flashed it but i found out that it had many bugs so i decided to install cm 11 again when i tried to flash it via cwm during the installation a message apears saying: this rom is for c5303 .c5306 your device is lb huashan and istallation is aborted.I tried to relock and reunlock the bootloader via the official sony way and it was succesful but when i went to cmw this message appeared again then i uninstalled and reinstalled philz and cmw but again the same thing happened . Now i am stuck with this rom and
dont know what to do. I will apreciate your help.
Sent from my c5303
Recently flashed custom xperia 5.1.1 rom and now my device status has changed from xperia c5502 to c5503.
Repaired with Flashtool and works fine sony pc companion shows c5502
But it shows an error when trying to flash the new resurrection rom (6.0.1), in the recovery it aborts saying this rom is built for c5502, c5503 and m36h.
Is there any possible way to truely get back on the stock rom.
I can not load my phone twrp 3 and above . When I install the phone will not turn on the flashing red light will flash only . I did not try in every way . Other than that I can not install now twrp 2.8.7 installed . I am currently using version 5.1.1 .228 . I would be glad if you help
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
chauhanjayc said:
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
Click to expand...
Click to collapse
First of all: read the forum rules. After 1400 posts you should know that the GENERAL section is not the right place to ask questions like this.
Second: Wich file system are you using? If it's any other but ext4 you should format the storage using twrp.
Did you flash with Androxyde's flashtool, or just with Emma?
Hey ! i too experienced the same issue earlier today.. Only the latest build isnt working when flashed ..I flashed the kitkat build via flashtool and it worked.. is there any solution.. ? ive been trying since morning.. And another thing is that recovery also cant be flashed . So im literally stuck at this phase. :crying:
just flash a stock rom from flashtool i always encounter that when i corrupt flashing thru recovery.. like i fully wipe and forgot to put rom in internal lol
Flashed with both Emma and flashetool
Even tried custom lp rom via twrp but the same situation
Have you fixed your issue? I have the same case. I flashed it to stock ROM but the black screen is still occurring after xperia logo.
1. make sure your partition is ext4
2. download proper official Kitkat 4.4.4 firmware (.tft), flash it with Androxyde's flashtool (make sure the .ftf is not corrupted, driver is installed, good usb cable and 75% of battery or above).
3. if you wanna check the device is in good shape, try to boot up (in my case, I'll flash LP 5.1.1 right after flashing KK firmware is done).
4. if the device is boot up correctly, turn off your device and begin to flash LP 5.1.1 firmware
NOTE: somewhere on this forum say about the right version of flashtool to flash the firmware to our device, older version of flashtool. But I'm using version 0.9.22.3 and everything is fine. However, I can see that the flashtool is not using the newest engine while flashing my device (C6603) but using the older engine instead.
Hi,
I have already been in such a situation.
1) Try to flash (with flashtool) official 4.2 Android firmware, boot, then flash latest one (5.1.1)
2) Try to flash official firmware (4.2) with xflasher (https://forum.xda-developers.com/showpost.php?p=74122327&postcount=212, https://forum.xda-developers.com/showpost.php?p=74122295&postcount=2)
Good luck!
still having same issue with my z3, flashing with emma and tft but stuck on sony logo
I also met this problem yesterday.
I use the latest Flashtool and flash the latest firmware but it said The bundle does not match the connected device.
Then I use a older version like 0.9.18 to flash the latest firmware. The problem you said occurred. It stuck in black screen after Sony logo.
Here is how I fix it:
1. Use an older version of Flashtool to flash an older firmware such as 4.4.4_10.5.1.A.0.283 like me.
2. After flashing the old firmware it should be normally powered on. Then power off and enter the flash mode again. And flash the latest firmware, problem fixed.
Hope that my experience can offer a bit help for you.