Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Missing features.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
Click to expand...
Click to collapse
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
Phone calls? No. I believe this is a common issue, there is no phone hardware onboard. Though I'm not that familiar with that feature.
Email and other task could be handled with Autovoice if Google app can not. Again, not that familiar.
For me, the main missing feature was choice of navigation app. Nav questions will only launch GMaps, newer version can launch Waze or your nag app choice, by default.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Thanks for your comment. I tried your solution and its working better, i still get some errors time to time, but is much better...thanks
[
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
If you have a phone connected via BT you can make phone calls using OK Google.
Tumke32 said:
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
Click to expand...
Click to collapse
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
newt_dunbarton said:
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
Click to expand...
Click to collapse
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Can you elaborate on this process please?
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
aledesma said:
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
Click to expand...
Click to collapse
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
shaiq123 said:
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Click to expand...
Click to collapse
Hi,
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
Were can i find this option? I have a nexus 5 and i updated my google now, but there no option like that in google now. Or do you mean the option "bluetooth headset" under voice?
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
I can't find any options in Xposed MTC related to what you are writing. Are you sure this option is in Xposed MTC?
Thank you!!!
carter.w.jason said:
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
Click to expand...
Click to collapse
I will give it a shot!!!
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Mr Bigglesworth said:
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Click to expand...
Click to collapse
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
dc5daft said:
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
Click to expand...
Click to collapse
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Mr Bigglesworth said:
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Click to expand...
Click to collapse
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
dc5daft said:
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
Click to expand...
Click to collapse
Thanks for this - and yes this where I had got to (which make me feel better!). And I too think the camera button may not be workable without root.
I think I need to change my plans and see if I can prevent the lockscreen to come on when connected to this bluetooth device. That way I can fall back to using ok google as the lockscreen prevents ok google from completing requests.
Okay - think I've done that and it was easy enough, now have a profile which when connected to HU through bluetooth does (1) set off wifi tether and (2) Set keyguard off. Then with (3) double tap to wake screen and (4) Ok google should be able to do what I need it to.
Last thing I'm wondering if you could do is to create a large voice dial icon (double normal size etc) on screen (in case initial ok google doesn't work)...
Hi,
I have searched on the internet but I can't find any good info about android auto.
First I don't understand how it works. I have seen that you need android auto on your phone in order to communicate with your car device but what is running on the car device? Is a different type of operating system?
Can I add an application developed for Android on Android Auto?
adrian94a said:
Hi,
I have searched on the internet but I can't find any good info about android auto.
First I don't understand how it works. I have seen that you need android auto on your phone in order to communicate with your car device but what is running on the car device? Is a different type of operating system?
Can I add an application developed for Android on Android Auto?
Click to expand...
Click to collapse
AA consists of 2 parts -
AA application running on the phone
AA client on say a car headunit (could also be another android phone or an android tablet) that mirrors the AA phone display
AA can be run self hosted on a phone, then you don't need the second part.
If you want to have a fixed display (client/server setup) in the car & you don't already have a car headunit supporting AA, you can install an app such as HUR- https://forum.xda-developers.com/ge...ndroid-4-1-headunit-reloaded-android-t3432348 on the headunit/tablet. There's a trial version that you can download to try.
Hi kk131
Thank you for your replay.
So if is running on my phone this means that all my phone application will be available on my car console?
adrian94a said:
Hi kk131
Thank you for your replay.
So if is running on my phone this means that all my phone application will be available on my car console?
Click to expand...
Click to collapse
As the purpose of AA is to enable phone use during driving, it provides limited access with a simplified display :
Google assistant - so you can have voice interaction
Phone
Navigation - waze/google maps
Music apps - google play music, spotify (depends what you have installed on your phone)
Great info.
I am asking this because I have an application of podcast on google play and I would like to be available on AA and I am trying to find out how can I do that.
Do you know any relevant info on the web that can clarify me? I am guessing that there are some constraints if we speak of automotive
Install AA on your phone., run it, see if the app is shown in the menu. If it isn't you can go into AA developer mode and enable 'unknown sources' and test again. The thread I referenced above covers getting in AA developer mode.
If that test is successful, then go further and install the client on your car console.
Great, I will try it and come back with some answers.
Thank you for your time
Hello again,
I manage to complete all my tests and all was ok. I have installed a few applications and one custom application and all worked ok.
I have one more question for you if you can help me of course.
Do you know a tutorial or something from where I can start with Android auto? I have seen that there are not tow application (one for Android and one for Android auto ) is the same app but for Auto version are fewer scenes.
If you can give me a hint here it will be just great.
Thank you.
adrian94a said:
Hello again,
I manage to complete all my tests and all was ok. I have installed a few applications and one custom application and all worked ok.
I have one more question for you if you can help me of course.
Do you know a tutorial or something from where I can start with Android auto? I have seen that there are not tow application (one for Android and one for Android auto ) is the same app but for Auto version are fewer scenes.
If you can give me a hint here it will be just great.
Thank you.
Click to expand...
Click to collapse
It would be helpful to know what hardware you have in your car.
I'm not an expert, I use a Nexus 7 tablet for the car display with headunit reload (HUR).
I lost the ability to use Android Auto on my phone screen after upgrading to Android 10 and then doing a factory reset. I was really upset because I use it all the time! It makes using navigation, music and messaging safer while driving. I seriously missed it! Unrelated, I installed an app called "Activity Launcher" while following directions to enable RCS in Android Messages. Tonight I was thinking about how I was unable to launch Android Auto, even though it is actually on my phone. So, I looked for it in Activity Launcher. Found it. And started clicking on things under it. Turns out, clicking the one that says "LaunchPadInternalActivity" will start Android Auto on my phone screen!! Even better, if you long-press it, you are able to create a shortcut to launch it directly from your home screen! So, what I'm saying is, I found a backdoor way to use Android Auto on my phone screen, even though Google took it away! Hope this is useful for some of you on here!
Thank You!!!!!!! Finally a solution that works.
I wish you happiness mate!
Hello,
Please allow me to describe my problem. I decided to buy a galaxy S5 mini to do and to install all the needed applications just in order to be able to stream YouTube, browse the Internet and watch the videos downloaded in that phone. After two weeks I have to say, I did not reach any success or not sufficient.
S5 mini has Auto root / I have full access
installed first edition of android Marshmallow
Whatever I do, alway it will update AA from version 2.9 to the newest last version. If the carstream is listed in AA on car's screen showing me
"Click last icon in bottom bar and start playing from you tube"
Is here anyone so kind who would be able to help me a to write step by step what should or need to do to reach the success?
Please excuse for new topic, but I could not find anything similar to me, what would finally worked for me.
I am not the developer, only stupid user,
PLEASE HELP ME, THANK YOU
I was very happy with my find x3 neo... Until yesterday android 13 upgrade, now I'm getting this really annoying popup every ten minutes, no way to stop it or fix that (or disable) that app. It's a system app, in English is named Quick Device Connect i think, it's a feature like airdrop I think, something that I won't use at all and I'm totally not interested in using it.
Already chatted with official support, they suggested me to go back to factory defaults (lol) I have a lot of data and settings, I just don't want to do that, it would be sufficient to simply make this useless feature to no start at all or simply hide this error popup. I don't feel the need to fix this app since I'm not planning to use it at all.
Any new updates after android 13?
I've fixed by installing the oneplus version of quick device connect using an apk i found in the wild, if someone has the same problem can try this method