Hello. I need help from you guys. As the title says, I need the stock rom for honor 5c nem-l21 (honor 7 lite). I need a flashable twrp zip because the dload method doesn't work. I now have Meticulus' Beanstalk 6 custom rom. I hope you can help me asap.
CristianRo10 said:
Hello. I need help from you guys. As the title says, I need the stock rom for honor 5c nem-l21 (honor 7 lite). I need a flashable twrp zip because the dload method doesn't work. I now have Meticulus' Beanstalk 6 custom rom. I hope you can help me asap.
Click to expand...
Click to collapse
but those flashable zips dont work and you need to use dload method with update.app file with stock recovery installed. as far as I knew, this was not working unless there was any work around developed by any developer to have zip working for Honor phones.
shashank1320 said:
but those flashable zips dont work and you need to use dload method with update.app file with stock recovery installed. as far as I knew, this was not working unless there was any work around developed by any developer to have zip working for Honor phones.
Click to expand...
Click to collapse
But what if I use Huawei Update Extractor to extract all the files from update.app and then flash them with adb?
CristianRo10 said:
But what if I use Huawei Update Extractor to extract all the files from update.app and then flash them with adb?
Click to expand...
Click to collapse
Haven't used so not sure if that works. May be some other experts who used can guide and also you may be able to restore the twrp backup for your model if someone has it..
---------- Post added at 01:05 PM ---------- Previous post was at 01:01 PM ----------
Why dload dont work? I messed my phone few times today and was able to through smoothly. L22 model. Can yo go to nougat stock or anything? If yes, you can flash the p9 lite nougat rom. I did it and went fine
shashank1320 said:
Haven't used so not sure if that works. May be some other experts who used can guide and also you may be able to restore the twrp backup for your model if someone has it..
---------- Post added at 01:05 PM ---------- Previous post was at 01:01 PM ----------
Why dload dont work? I messed my phone few times today and was able to through smoothly. L22 model. Can yo go to nougat stock or anything? If yes, you can flash the p9 lite nougat rom. I did it and went fine
Click to expand...
Click to collapse
I tried to flash stock nougat rom but I think it didnt work because I'm on marshmallow. I will try to flash stock marshmallow and see if it works
CristianRo10 said:
I tried to flash stock nougat rom but I think it didnt work because I'm on marshmallow. I will try to flash stock marshmallow and see if it works
Click to expand...
Click to collapse
Yes please flash stock MM first. It may/ may not work. Do you have the roll back package for your model?
shashank1320 said:
Yes please flash stock MM first. It may/ may not work. Do you have the roll back package for your model?
Click to expand...
Click to collapse
No, I dont have it, but I know where to get it. I'm doing this now
CristianRo10 said:
No, I dont have it, but I know where to get it. I'm doing this now
Click to expand...
Click to collapse
Good luck mate.
thank you
it says incompatibility with current system version what should I do?
CristianRo10 said:
it says incompatibility with current system version what should I do?
Click to expand...
Click to collapse
Whats the current version and which version you are flashing?
shashank1320 said:
Whats the current version and which version you are flashing?
Click to expand...
Click to collapse
I flashed an android 7.0 emui 5.0 rom ( elite rom 2.0 ). I was thinking I can rollback from this rom to stock MM but it didnt work. ( I have tried with rollback package from here http://www.hihonor.com/pl/support/details/index.html?DOC_ID=94145 ). My model number is generic_a15, build number NEM-L21C432B301-log EMUI version 5.0 Android version 7.0
CristianRo10 said:
I flashed an android 7.0 emui 5.0 rom ( elite rom 2.0 ). I was thinking I can rollback from this rom to stock MM but it didnt work. ( I have tried with rollback package from here http://www.hihonor.com/pl/support/details/index.html?DOC_ID=94145 ). My model number is generic_a15, build number NEM-L21C432B301-log EMUI version 5.0 Android version 7.0
Click to expand...
Click to collapse
You can try flashing arsenik rom available in P9 lite thread. Worked for me. Thats nougat based debloated rom. Why you want to rollback, if i can ask?
shashank1320 said:
You can try flashing arsenik rom available in P9 lite thread. Worked for me. Thats nougat based debloated rom. Why you want to rollback, if i can ask?
Click to expand...
Click to collapse
I want to rollback because in elite rom 2.0 is no sound. The developer said that in elite rom 3.0 will be, and it will be released in one day. But thanks for telling me this, I will flash Arsenik rom now.
Ok I flashed Arsenik Rom, but I don't have sound!!! And now it seems that Elite Rom and Arsenik Rom combined into one rom... It has everything that Elite Rom has ans everything that Arsenik Rom has. WTF
CristianRo10 said:
Ok I flashed Arsenik Rom, but I don't have sound!!! And now it seems that Elite Rom and Arsenik Rom combined into one rom... It has everything that Elite Rom has ans everything that Arsenik Rom has. WTF
Click to expand...
Click to collapse
I flashed arsenik yesterday and working fine on l22 model. Send your recovery log to @simo255 (developer)
When I flash Arsenik, I should wipe something? Because I didn't wipe anything..
CristianRo10 said:
When I flash Arsenik, I should wipe something? Because I didn't wipe anything..
Click to expand...
Click to collapse
@simo255, does installing arsenik rom require any wipe etc?
CristianRo10 said:
When I flash Arsenik, I should wipe something? Because I didn't wipe anything..
Click to expand...
Click to collapse
hello, since elite rom changed all your files, so you need to go back to stock and then flash arsenik !
and my rom doesn't touch something that can make sound not working
simo255 said:
hello, since elite rom changed all your files, so you need to go back to stock and then flash arsenik !
and my rom doesn't touch something that can make sound not working
Click to expand...
Click to collapse
Simo, quick question. Need to wipe cache, data, dalvik while installing arsenik rom?
Related
Flyme6 6.7.5.13 by LR.Team Official Flyme
13.6.2017
http://bbs.lenovomobile.cn/z2pro/t848720/
http://www.flyme.cn/firmwarelist-114.html#16
Which languages are available? Chinese and English?
I didnt try yet, just made a mirror: https://mega.nz/#!DYs3QISL!bqZTRHeiFuqvUqrXu19iNcO2vRc-00wfoV5cH7Bpu9Q
der-Andi said:
Which languages are available? Chinese and English?
Click to expand...
Click to collapse
its multilanguage, there is deutsch, i tried it, but vibration*doesn't work. u-touch not implemented.
Odoslané z ZUK Z2121 pomocou Tapatalku
Which Android Version?
toom11 said:
Which Android Version?
Click to expand...
Click to collapse
6.0
Odoslané z ZUK Z2121 pomocou Tapatalku
Does anyone been able to install gapps in this ROM?
Thanks
any installation guide about this rom ? i downloaded and installed with trwp recovery but after android logo then only black screen and waiting ... what is wrong ? my phone bootloader unlocked ...
KaptanHarlock said:
any installation guide about this rom ? i downloaded and installed with trwp recovery but after android logo then only black screen and waiting ... what is wrong ? my phone bootloader unlocked ...
Click to expand...
Click to collapse
This is completely a guess, but since you didn't mention it... What system did you come from? In general, you should use QFIL (part of the Qualcomm QPST tools) to install an appropriate version of stock ZUI & let it boot once before you load TWRP and flash a custom ROM every time you change versions, to make sure you get the appropriate baseband and other hardware drivers in their special little hidden partitions and other strangeness flushed out before turning a custom ROM loose on your phone. Specifically ZUI 2.3 before installing a Marshmallow (Android 6) ROM and ZUI 2.5 before installing a Nougat (Android 7) ROM.
Did you do that already? If not, give it a shot and see if it fixes your problem.
i was have to this rom ''MK60.1-z2pro-170413-RELEASE'' . i wasnt have to stock rom
---------- Post added at 09:24 PM ---------- Previous post was at 08:59 PM ----------
i need to stock rom everytime while installing custom rom ? for example 6.0 stock rom for install 6 based custom rom or android 7 stock rom for install android 7 custom rom ?
KaptanHarlock said:
i was have to this rom ''MK60.1-z2pro-170413-RELEASE'' . i wasnt have to stock rom
---------- Post added at 09:24 PM ---------- Previous post was at 08:59 PM ----------
i need to stock rom everytime while installing custom rom ? for example 6.0 stock rom for install 6 based custom rom or android 7 stock rom for install android 7 custom rom ?
Click to expand...
Click to collapse
That's probably a good idea. I might just be being overly cautious, but I would recommend using QFIL to blow ZUI 2.3 and boot it once before installing TWRP and an android 6-based custom ROM. Just in case the previous custom ROM did something funny to your /persist partition.
im tried lastest flyme rom from this link http://forum.flymeos.com/thread-28211-1-1.html i got 2 errors .
1. mobile data dont working
2. home button dont awake to phone when screen off . u need to push power button...
KaptanHarlock said:
im tried lastest flyme rom from this link http://forum.flymeos.com/thread-28211-1-1.html i got 2 errors .
1. mobile data dont working
2. home button dont awake to phone when screen off . u need to push power button...
Click to expand...
Click to collapse
try this one https://mega.nz/#!BANhTIZZ!OH8QT5WOv...3w1PlExDfSTzNM its from developer Siyang its based on original zui 2.3, everything is working, u-touch, u-health, if you want more languages, install pico gapps, then install more locale 2, and for multicoloured notification led install Light Flow. very good rom.
original post: https://zukfans.eu/community/threads/flyme-6-7-5-15-by-siyang.6126/
lubikem01 said:
try this one https://mega.nz/#!BANhTIZZ!OH8QT5WOv...3w1PlExDfSTzNM its from developer Siyang its based on original zui 2.3, everything is working, u-touch, u-health, if you want more languages, install pico gapps, then install more locale 2, and for multicoloured notification led install Light Flow. very good rom.
original post: https://zukfans.eu/community/threads/flyme-6-7-5-15-by-siyang.6126/
Click to expand...
Click to collapse
i hope he can update it from lastest flyme rom ...
new version look on the main page
flyme 6 roms still have to mobile data problem...
new version look on the main page
Hi guys!
Do you want the stock b895 (brand vodafone) deabloated and with some mod and tweaks?
EDIT: I'll do a twrp backup beacause I can't make a flashable
Yes, as we no-brand users will try EMUI 4.1
for the moment I need to flash aospa because I have some problem with RIL of b895
Do it for b896, not b895
Use this tool:
https://forum.xda-developers.com/p8lite/development/betap8litetoolpack-mod-p8-lite-t3589396
Only need to boot in twrp and use the options to get cust, boot, recovery and system images then download any off my roms, open rom zip and replace my images with yours! Then you will get a flash zip.
My signature have a link to one of my roms.
The developement is in pause... I have some problem with b896
I can start with b895
Nothing sim card doesn't works
News: I can only do b895 mod but i need some testers because i haven't p8 lite now
Antox97 said:
Yes, as we no-brand users will try EMUI 4.1
Click to expand...
Click to collapse
No branded emui 4.1 in Y6 ii and work in P8 lite
Adi5 said:
No branded emui 4.1 in Y6 ii and work in P8 lite
Click to expand...
Click to collapse
Hm interesting
Adi5 said:
No branded emui 4.1 in Y6 ii and work in P8 lite
Click to expand...
Click to collapse
Yes, it' s CAM-L21C432Bxxx and it's emui 4.1.3
Who can try this flashable of this b895 mod?
I used Smartswitch to upgrade my Tab A to 7.1.1 and decided to give rooting a try. I flashed CF Autoroot (CF-Auto-Root-gt58wifi-gt58wifixx-smt350) with ODIN which was successful in installing SU and giving me root. Confirmed using Titanium Backup and FolderMount.
Have you found something to change the lock screen clock design? I hate the hours & minutes arranged vertically.
Sent from my ONEPLUS A5000 using Tapatalk
SM-T550 Still waiting grrrrrr
trying to build custom ROM for it (using either Superr Kitchen or ASSAYYED KITCHEN) , but does not look like working, it bootloops, I know there's custom ROM done for 7.0 (@luattic ), but not sure why it does not works for 7.1.1., haven't check with @ashyx for his feedback
funny thing is that you can flash offical firmware of SM-T350 7.1.1, and then flash @ashyx TWRP 3.1.0-1, and then flash latest super su, it all good...it just when build custom ROM for 7.1.1 does not works...i wonder if these ROM kitchen does not include latest superSU or maybe something else
jazzespresso said:
trying to build custom ROM for it (using either Superr Kitchen or ASSAYYED KITCHEN) , but does not look like working, it bootloops, I know there's custom ROM done for 7.0 (@luattic ), but not sure why it does not works for 7.1.1., haven't check with @ashyx for his feedback
funny thing is that you can flash offical firmware of SM-T350 7.1.1, and then flash @ashyx TWRP 3.1.0-1, and then flash latest super su, it all good...it just when build custom ROM for 7.1.1 does not works...i wonder if these ROM kitchen does not include latest superSU or maybe something else
Click to expand...
Click to collapse
Haven't even started on the custom rom I was going to make, updating at the moment, but can you help me out? Haven't been learning about Android Development yet and still trying to learn Java and Kotlin (don't know any at the moment too). Thanks if you reply back.
Confirmed worked for me to even though chainfire site says for marshmallow
I wasn't able to root my sm-t350 until I upgraded to 7.1.1 it was a brand new device as of yesterday. I tried just about any method I could find, was about to give up then I took it from 6.x.x to 7.1.1 and then the method you mentioned above and boooooyah....
jazzespresso said:
trying to build custom ROM for it (using either Superr Kitchen or ASSAYYED KITCHEN) , but does not look like working, it bootloops, I know there's custom ROM done for 7.0 (@luattic ), but not sure why it does not works for 7.1.1., haven't check with @ashyx for his feedback
funny thing is that you can flash offical firmware of SM-T350 7.1.1, and then flash @ashyx TWRP 3.1.0-1, and then flash latest super su, it all good...it just when build custom ROM for 7.1.1 does not works...i wonder if these ROM kitchen does not include latest superSU or maybe something else
Click to expand...
Click to collapse
7.1 changed a lot of the filesystem and policy layout. That is probably why the custom rom kitchens aren't quite working all the way then. I do believe you do need to use at least SuperSU 2.8 on Nougat builds of android, 2.82 is a super decent build to run on Nougat 7.0 and 7.1.1
Does anyone have a no pc method? My computer is slow af.
Is smartswitch the built in updater? That modal that pops up saying there is an update available?
DeepWideBellWonder said:
Does anyone have a no pc method? My computer is slow af.
Click to expand...
Click to collapse
What difference does that make, you're only downloading it?
Have you found a TWRP package which is compatible with the SM-T350 running Nougat 7.1.1?
Have you done it with Galaxy Tab A 8.0 2017?
---------- Post added at 11:02 AM ---------- Previous post was at 10:57 AM ----------
rgp1236 said:
I used Smartswitch to upgrade my Tab A to 7.1.1 and decided to give rooting a try. I flashed CF Autoroot (CF-Auto-Root-gt58wifi-gt58wifixx-smt350) with ODIN which was successful in installing SU and giving me root. Confirmed using Titanium Backup and FolderMount.
Click to expand...
Click to collapse
Have you used the Galaxy Tab A 8.0 2017 version? If not, will it work with it? It runs 7.1.1 too.
Bricked my last tablet just bought a sm-t350 with 7.1.1
I have a sm-t350 running 7.1.1. I’ve searched everywhere for step by step instructions on how to root my tab. If somebody could please point me in the right direction that would be very helpful. Very interested in what android has to offer. Doing as much research as I can but nervous since I hard bricked my last device thanks
Cbr100091 said:
I have a sm-t350 running 7.1.1. I’ve searched everywhere for step by step instructions on how to root my tab. If somebody could please point me in the right direction that would be very helpful. Very interested in what android has to offer. Doing as much research as I can but nervous since I hard bricked my last device thanks
Click to expand...
Click to collapse
Referring to @jazzespresso above...
I am waiting to hear back from @ashyx on the latest TWRP build for the T350. From there, it's a simple matter to flash via Odin and then zip install SuperSU 2.82 via TWRP.
Edit:
TWRP v3.1.0-1 is available for DL to T350. From there, just follow instructions above to root.
Help
Download link to TWRP?
there where
Edit:
TWRP v3.1.0-1 is available for DL to T350. From there, just follow instructions above to root.
gr1mr34p3r said:
Have you found a TWRP package which is compatible with the SM-T350 running Nougat 7.1.1?
Click to expand...
Click to collapse
i need to know this also,..
This did root my device, but resulted in some strange behavior. When I restart the tablet, some apps are randomly deleted on startup. Any ideas?
Hello, I cannot give root access to my device Samsung Tab A SM T350. My device now has version 7.1.1. How do I root the device?
Project depreciated! Leaving here for the time being.
See yshalsager's thread for automated firmware zips and quicker releases:
https://forum.xda-developers.com/mi-6/development/firmware-xiaomi-mi-6-t3760924
Here will be the firmware packages from the latest Global/China MIUI ROMs for those of you using custom ROMs that require the firmware for radios etc to work.
I will try to keep it as up-to-date as possible so every time you need to update your ROM you can grab the newest firmware here and use it to keep firmware up-to-date as well.
Installation Instructions:
I recommend using firmware from the Stable builds, but the firmware from the other ROMs should be fine too. Let us know in the comments if you see any differences between them.
For Oreo ROMs use Oreo Firmware.
For Nougat ROMs use Nougat Firmware.
Follow advice from your ROM maintainer!
(or)
1. Wipes
2. Flash Firmware
3. Flash ROM
4. Other stuff you do in recovery
Global ROMs Firmware:
Oreo Global Developer Firmware:
Latest:
8.3.1: AFH
Previous:
See my AFH Global Beta Oreo folder: All Firmware Packages
Nougat Global Stable Firmware:
Latest:
9.2.2.0: AFH
Chinese ROMs Firmware:
Oreo China Stable Firmware:
Latest:
9.2.3.0: AFH
Oreo China Developer Firmware:
Latest:
8.2.24: AFH
Previous:
See my AFH China Beta Oreo folder: All Firmware Packages
Nougat China Stable Firmware:
Latest:
9.2.4.0: AFH
Previous:
See my AFH China Stable folder: All Firmware Packages
Nougat China Developer Firmware:
Latest:
7.12.7: AFH
Previous:
See my AFH China Dev folder: All Firmware Packages
thank you
Thanks. Note that you need the latest TWRP.
Release notes:
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html
Download:
https://dl.twrp.me/sagit/
Sounds great! Installing this on top of an already installed ROM is not recommended?
Ultraschorsch said:
Sounds great! Installing this on top of an already installed ROM is not recommended?
Click to expand...
Click to collapse
In theory it should be fine since it doesn't replace anything to do with /system.
In practice I'm not 100% sure as I've seen a few people mess up their installs by flashing firmware after ROM.
You can just flash firmware then dirty flash your ROM to be sure.
Kind of like if you were updating your ROM just using the zip version you already are on.
Dobsgw said:
In theory it should be fine since it doesn't replace anything to do with /system.
In practice I'm not 100% sure as I've seen a few people mess up their installs by flashing firmware after ROM.
You can just flash firmware then dirty flash your ROM to be sure.
Kind of like if you were updating your ROM just using the zip version you already are on.
Click to expand...
Click to collapse
That worked! I am on AOSPA and everything seems to work. Thank you for sharing!
Thread should be stickied
So for NisseCool's LOS15, I should grab the Oreo Alpha Firmware now? Or just keep the China Dev Nougat?
ArcOnFire said:
So for NisseCool's LOS15, I should grab the Oreo Alpha Firmware now? Or just keep the China Dev Nougat?
Click to expand...
Click to collapse
Up to you.
I'm using the dev for LOS 15 but they should all work fine.
There doesn't seem to be noticeable differences between the firmwares.
Just giving the option to those who want it
should I wipes system before I flash this firmware？
Liaoyiwa said:
should I wipes system before I flash this firmware？
Click to expand...
Click to collapse
No its not necessary.
Nothing from the zip should affect the system partition.
However I recommend flashing the firmware before flashing your ROM eg with an update or dirty flash just to be 100% sure.
But many users choose to just flash the updated firmware over their ROM and it works just as well
Maybe I'm just OCD about my install proceedures
Oreo Beta Firmware coming now. Link will be up today.
Thx a lot!I fixed nfc not working in miui by flashing the latest china dev firmware.
Dobsgw said:
Oreo Beta Firmware coming now. Link will be up today.
Click to expand...
Click to collapse
Hi buddy. Whick FW to use for latest AospExtended from 30/12/2017?
icrunchbanger said:
Hi buddy. Whick FW to use for latest AospExtended from 30/12/2017?
Click to expand...
Click to collapse
One of the latest ones
On LineageOS I'm using the latest stable firmware.
I haven't been able to update the firmware packages for the last week as I'm away ATM but will be back soon and can resume uploading them.
You can also make the zips yourself if you download the latest ROM from miui website and use one of mine as a template of what files to remove and what to leave.
And then compare the updater script to see what lines to remove.
Its really easy I'm just uploading for people that don't want to download an entire ROM
China dev 7.11.30 :
https://androidfilehost.com/?fid=745849072291698124
Global stable 9.0.2.0:
https://androidfilehost.com/?fid=889964283620776132
Hi, do you have Global Stable 8.2.2.0 firmware? I've mic problem with my Mi6, and it seems the mic is working only in 8.2.2.0
fuqiangyang said:
Hi, do you have Global Stable 8.2.2.0 firmware? I've mic problem with my Mi6, and it seems the mic is working only in 8.2.2.0
Click to expand...
Click to collapse
No sorry.
You can make it yourself very easily though by downloading the full package from end.muiu.com and then using one of my firmware packages as an example of what to remove and what to leave.
Then copy the updater-script from mine to yours or edit it to be the same and flash
Dobsgw said:
No sorry.
You can make it yourself very easily though by downloading the full package from end.muiu.com and then using one of my firmware packages as an example of what to remove and what to leave.
Then copy the updater-script from mine to yours or edit it to be the same and flash
Click to expand...
Click to collapse
Ok, i will try it, thanks a lot
I'm planning to use custom ROM like LOS, but everytime i flash, the mic always not working properly, for example when recording, my voice can't be recorded, but if i tap the mic, the tapping voice is recorded..in the MIUI 9 Stable and Beta, the voice can be recorded but we have to speak very closely to the mic and the voice result also very low..and when i tried to flash back to 8.2.2.0 the mic is working normally, so do u think it's the firmware problem?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
I'm quite newbie about this, so i'm really sorry if i bother u a lot
I have found an Article https://www.getdroidtips.com/lineage-os-17-huawei-p9/?unapproved=154590&moderation-hash=89ced71ec53851c118e2e0f91c228740#comment-154590 which says how to install LOS 17 in Huawei P9.
Did anyone install this ROM in Huawei P9? Is this ROM can be installed in P9? If yes the how?
before some week install it in and Rom booting and working . to install same as treble Rom , actually if can will install gapps later its way good to use and go !
albelushi7 said:
before some week install it in and Rom booting and working . to install same as treble Rom , actually if can will install gapps later its way good to use and go !
Click to expand...
Click to collapse
Currently I am using EMUI8 by rebranding to Chinese EVA-AL10, Do I need to rebrand back to EMUI5 in order to install the ROM? Which TWRP do I need to flash the Rom? Does the ROM has any issue?
md sabuj said:
Currently I am using EMUI8 by rebranding to Chinese EVA-AL10, Do I need to rebrand back to EMUI5 in order to install the ROM? Which TWRP do I need to flash the Rom? Does the ROM has any issue?
Click to expand...
Click to collapse
NO. This rom is for treble devices (android8)
scaniathe said:
NO. This rom is for treble devices (android8)
Click to expand...
Click to collapse
Brother you answer is not clear! I'm confused.
Which twrp Did you use to flash the ROM?