Database Develop

Completely revert to stock without USB connection

My phone is no longer capable of making a USB connection.
Now i want to revert it to stock, i thought i did so but it turns out the stock CWM rom I installed has some mods like root and busybox.
I was wondering if it is possible to flash an older stock rom through cwm and then have the phone auto update to the newest version? I also wonder if OTA updates update the baseband?

tetsuo55 said:
My phone is no longer capable of making a USB connection.
Now i want to revert it to stock, i thought i did so but it turns out the stock CWM rom I installed has some mods like root and busybox.
I was wondering if it is possible to flash an older stock rom through cwm and then have the phone auto update to the newest version? I also wonder if OTA updates update the baseband?
Click to expand...
Click to collapse
so your phone has a usb hardware malfunction\hardware problem and you need to send it to lg for repairs?

skylinegt77 said:
so your phone has a usb hardware malfunction\hardware problem and you need to send it to lg for repairs?
Click to expand...
Click to collapse
Thats what i think will happen, I want to fully revert to stock first though and check that.

You can use this
http://forum.xda-developers.com/showthread.php?t=1617458
Thou it won't be a clean stock and you probably need the stock kernel for your region to be inside or it can be seen.
If connecting the phone with the battery out, vol down pressed and it still doesn't change into the flash mode you can be sure the usb is dead. (provided the cable is 100% working)

it looks like that might work.
Do you know if Q is older than R and if my phone will auto-update to R?

Status update:
* Manually installed CWM using terminal
* Followed Kag's link and installed that ROM
Rom appears to be fully stock, but I'm not getting an OTA update to v20r.
I need to be on r because q was never officially released, at least not in my country so my phone should not have it.
Any ideas for getting it updated?

Try this thread : http://forum.xda-developers.com/showthread.php?t=1591801

nicorb said:
Try this thread : http://forum.xda-developers.com/showthread.php?t=1591801
Click to expand...
Click to collapse
That one has been hacked and rooted unfortunately

use version 20q the clean one you can find it in android development

tetsuo55 said:
That one has been hacked and rooted unfortunately
Click to expand...
Click to collapse
Oh ,ok then . Can try this one : http://forum.xda-developers.com/showthread.php?t=1609494 .
...And quiet an easy task too.
I managed to create 2 cmw zips myself together with the one posted here : http://forum.xda-developers.com/showthread.php?t=1621016 and been using ever since .
All credits go to the devs ofc.
My 2c

I used those links to flash 10a.
But it still says no OTA updates are available.
Could it be due to CWM?

tetsuo55 said:
I used those links to flash 10a.
But it still says no OTA updates are available.
Could it be due to CWM?
Click to expand...
Click to collapse
That should be due to LG server's load . Guess u could wait for it to appear, eventually, or just create a new 20R.

It looks like it's blocked on the software level and will only let you check once ever X period?
Its telling me that there is no update available without even trying to connect, the answer comes so fast.

Yes...i believe i once read about that somewhere in here.
Which baseband are you on now?

218

Thats a bugger..sorry .Dont think theres another way to update bb except from flashing.
About OTA ,doesnt work for any country.
Ill b checking on this one though as it interests me too.

[GUIDE]One Click Return to Stock i9020t/23

This script returns to unrooted, factory state android 4.0.4.
1. Download this zip - Quicker download here:
http://www.mediafire.com/?pzrzrt3583rgbmf
2. Backup your phone (everything! sd, apps, games etc).
3. Plug in your phone, turn on USB debugging.
4. Unzip the downloaded files.
5. Open run.bat
6. Type in Y then press enter.
7. It does the rest.
Had to do this since i'm sending off my phone to samsung, basically used this:
http://forum.xda-developers.com/showthread.php?t=1167819&highlight=unroot
and updated the images for 4.0.4 and for i9020t/23 (this won't work for nexus 4g or i9020a). It worked well for me so I thought someone else might find it useful.
If you're having problems it's probably because you haven't installed the windows drivers correctly, I can't really help you there (google it or something!)
If you want to thank anyone, go to the other thread and thank michaelpeerman. All credit goes to him.
Edit: By request, someone wanted the same thing but for 2.3.6, so here is the link for that
Edit: Someone else took over for jelly bean, found HERE: http://forum.xda-developers.com/showthread.php?t=1807861&highlight=one+click

HosainH said:
This script returns to unrooted, factory state.
1. Download this zip
2. Backup your phone (everything! sd, apps, games etc).
3. Plug in your phone, turn on USB debugging.
4. Unzip the downloaded files.
5. Open run.bat
6. Type in Y then press enter.
7. It does the rest.
Had to do this since i'm sending off my phone to samsung, basically used this:
http://forum.xda-developers.com/showthread.php?t=1167819&highlight=unroot
and updated the images for 4.0.4 and for i9020t/23 (this won't work for nexus 4g or i9020a). It worked well for me so I thought someone else might find it useful.
If you're having problems it's probably because you haven't installed the windows drivers correctly, I can't really help you there (google it or something!)
If you want to thank anyone, go to the other thread and thank michaelpeerman. All credit goes to him.
Click to expand...
Click to collapse
So what does this do exactly, flash a stock 4.04 rom and lock the bootloader?

bringonblink said:
So what does this do exactly, flash a stock 4.04 rom and lock the bootloader?
Click to expand...
Click to collapse
Yep, and also unroots.

gonna dl this even tho i dont need it yet... but good feeling to have it just incase...

Used this tonight. Works on my 9023 no probs.
Thanks.

just tried it. It does exactly what it should do!
very good work

Downloading it now!!
I just need it cox of selling my phone!

Mirror pls? =(

alahkel said:
Mirror pls? =(
Click to expand...
Click to collapse
Anything wrong with sendspace? And any preferred hosting site?
Glad you guys found it useful btw!

Adding a mediafire link since that's probably more convinient.
http://www.mediafire.com/?pzrzrt3583rgbmf

Hi there!
Is the One CLick 2.3.6 edition compatible with 9023?

I have a i9020T stock 4.0.4 never rooted. If I run the 2.3.6 script,will it go back to stock 2.3.6 without problems?

Dadi68 said:
Hi there!
Is the One CLick 2.3.6 edition compatible with 9023?
Click to expand...
Click to collapse
Yep.
onasri15 said:
I have a i9020T stock 4.0.4 never rooted. If I run the 2.3.6 script,will it go back to stock 2.3.6 without problems?
Click to expand...
Click to collapse
My understanding is that you require root to flash any ROM, this would be no exception. It wouldn't be that hard to root and then run the tool though.

But there'll be no problem rolling back to 2.3.6 from stock (rooted) 4.0.4?

onasri15 said:
But there'll be no problem rolling back to 2.3.6 from stock (rooted) 4.0.4?
Click to expand...
Click to collapse
Of course not.

Hi,
I got a really f******g problem with my NS. The power button is out of service. Thus my only aim is to get back to the unroot locked bootloader rom in order to send it to samsung.
I tried to do that manually with cmd.
I tried via Odin
I tried via your one click zip
I used my computer (the one i used to root it for the first time, guessing the drivers didn't change). Everytime, the command got stuck at 'waiting for device'. I thought it was a driver problem, tried to reinstall sdk, reinstall drivers. I'm still blocked at waiting for device.
I tried with another 'virgin' computer. I installed PDAnet to get drivers and make sure they work. (tried CMD or with your one click zip..) I'm still still stucked at waiting for device. However, my device do is recognised by both computers..4
Any idea?
Is my ****ing power button messing around?
Two days i'm drudging on this.. I'm thinking about suicide by now..

zapskull said:
Hi,
I got a really f******g problem with my NS. The power button is out of service. Thus my only aim is to get back to the unroot locked bootloader rom in order to send it to samsung.
I tried to do that manually with cmd.
I tried via Odin
I tried via your one click zip
I used my computer (the one i used to root it for the first time, guessing the drivers didn't change). Everytime, the command got stuck at 'waiting for device'. I thought it was a driver problem, tried to reinstall sdk, reinstall drivers. I'm still blocked at waiting for device.
I tried with another 'virgin' computer. I installed PDAnet to get drivers and make sure they work. (tried CMD or with your one click zip..) I'm still still stucked at waiting for device. However, my device do is recognised by both computers..4
Any idea?
Is my ****ing power button messing around?
Two days i'm drudging on this.. I'm thinking about suicide by now..
Click to expand...
Click to collapse
Sorry mate I really have no idea, maybe you could try calling up samsung and ask them if they would repair it even if you rooted? It is a developer phone and so they must understand that most people with a Nexus S root it..

I'm looking to sell my NS so wanted to get it back to stock and this script worked perfectly. Thanks so much!

one click stock JB
i took the liberty of replacing the images in the script with the ones in the JB factory image . the script works with JB . i will upload a link for stock JB . if that is an inconvenience for the thread starter... please tell me and i'll remove it . enjoy .
oh and thank you HosainH and michaelpeerman
and here it is :
https://docs.google.com/open?id=0BxOITIU5B1JYbkJWZ2R3Rk5BWjA

raducux said:
i took the liberty of replacing the images in the script with the ones in the JB factory image . the script works with JB . i will upload a link for stock JB . if that is an inconvenience for the thread starter... please tell me and i'll remove it . enjoy .
oh and thank you HosainH and michaelpeerman
and here it is :
https://docs.google.com/open?id=0BxOITIU5B1JYbkJWZ2R3Rk5BWjA
Click to expand...
Click to collapse
Saved me the trouble of doing it myself
Thanks!

[TOOL] Preparing for KitKat: Return to OTA Path from any ROM

This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!

The emergency utility was able to get me out of my soft brick. Thank you sir!

xt925
Does it works on xt925 ?
Thanks.

morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.

Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?

andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.

Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?

Nice to know it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you

yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US

150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?

A very sticky situation with my LG G watch R

this has been bugging me for a while now. When I go into the bootloader interface, instead of the device saying 'ADB Tester', it says 'Bootloader Interface' and I cant even flash system images or things like that. If you need more information, please ask me. I need help as soon as possible so that I can update this watch so that it enables wifi. Thanks

You've got to give us more information

Screenshots
I hope these embedded pictures can speak for itself.
The first 3 pictures is the process of installing the update ZIP.
The last 2 pictures shows that the device is not an ADB device but a Bootloader Interface

If I'm not wrong, the zip you want to flash fails because needs android 5.1.1 and you have 5.0.2, is that possible?
Also, if that zip is only to enable wifi capabilities, why you don't update the system directly? The last stock rom enables official wifi
Anyway, that error happends only with this zip of with another ones?

II-DJ-Messiah-II said:
this has been bugging me for a while now. When I go into the bootloader interface, instead of the device saying 'ADB Tester', it says 'Bootloader Interface' and I cant even flash system images or things like that. If you need more information, please ask me. I need help as soon as possible so that I can update this watch so that it enables wifi. Thanks
Click to expand...
Click to collapse
Isn't it normal that your computer shows Bootloader Interface when your device is in bootloader mode?
Can you try to use this TWRP img : https://drive.google.com/file/d/0B7aWmhGnkGTpcWlMT0Z2WDh3Z1k/view It's made by lion567 and he changed the fingerprint of the watch so that watch is recognized as 5.1.1 and not 5.0.2. It also contains the intersectRaven's Kernel.

efipso said:
If I'm not wrong, the zip you want to flash fails because needs android 5.1.1 and you have 5.0.2, is that possible?
Also, if that zip is only to enable wifi capabilities, why you don't update the system directly? The last stock rom enables official wifi
Anyway, that error happends only with this zip of with another ones?
Click to expand...
Click to collapse
Only with the update files. The fingerprint is 5.0.2 while the update requires 5.1.1

Cameo164 said:
Isn't it normal that your computer shows Bootloader Interface when your device is in bootloader mode?
Can you try to use this TWRP img : https://drive.google.com/file/d/0B7aWmhGnkGTpcWlMT0Z2WDh3Z1k/view It's made by lion567 and he changed the fingerprint of the watch so that watch is recognized as 5.1.1 and not 5.0.2. It also contains the intersectRaven's Kernel.
Click to expand...
Click to collapse
Usually says adb interface but I flashed back from a costume rom to a ROM provided by intersect. That's when I cannot connect adb to my device when it is in fastboot mode. I can even flash new boot or IMG files from there. And when I get back, I'll try your link.
Thanks for your time!

Did it work ?

Is this the end?
Cameo164 said:
Did it work ?
Click to expand...
Click to collapse
I couldn't get into the system in my LG g Watch r for 1 week, then today i managed to get into recovery somehow, tried to sideload a system zip file and it says unable to mount /data file.
After completion, I went to check the amount of MB my internal storage has and it is 0. I might start a new thread on this one.
Please help

II-DJ-Messiah-II said:
I couldn't get into the system in my LG g Watch r for 1 week, then today i managed to get into recovery somehow, tried to sideload a system zip file and it says unable to mount /data file.
After completion, I went to check the amount of MB my internal storage has and it is 0. I might start a new thread on this one.
Please help
Click to expand...
Click to collapse
Ok found another person who was having this issue, seems like he headed to this thread :
http://forum.xda-developers.com/g-w...rgency-guide-how-to-blank-regenerate-t2984678
I will try this out then flash the zip you provided.

I had that problem on my phone and my watch too, but I can't remeber how I solved it.

Solved it and fixed it!
Here are the two threads i posted!
First
Second
Now a BIG THANK YOU TO YOU because the recovery you provided has worked! it has fixed the fingerprint
woohoooo
your a champ cameo!!!!! i wish i could upvote you a million times

Cameo164 said:
Did it work ?
Click to expand...
Click to collapse
Yes it worked, finally!

II-DJ-Messiah-II said:
Now a BIG THANK YOU TO YOU because the recovery you provided has worked! it has fixed the fingerprint
woohoooo
your a champ cameo!!!!! i wish i could upvote you a million times
Click to expand...
Click to collapse
II-DJ-Messiah-II said:
Yes it worked, finally!
Click to expand...
Click to collapse
No problem I'm here to help But thank you for your very nice words. They're really nice to read. And big thanks to @lion567 too, because he is creator of the modified twrp recovery. I've only shared it.
Byee

Stuck on the black screen - power on doesn't work, only Recovery and Download works

Hello.
I've been playing with some custom ROMs, recoveries, etc. on S10 SM-G973F. Every time something went wrong I was able to flash stock Android 11 ROM with Odin and run the system after that. But not anymore...
At this moment I have access to Recovery Mode (stock, TWRP, LineageOS... whichever I flash with Odin) and Download Mode. When I try to power on the phone with button or with an option Boot to System from Recovery the phone turns off and nothing else happens. Black screen only, no vibration, etc.
I tried to format data and cache in Stock Recovery and TWRP. I tried to flash many time, changed USB cable, change USB port... nothing helps.
What is strange that after I flash the stock recovery the phone boots one time displaying the unlocked bootloader warning, Samsung logo and Android robot icon with an Erasing sign... but just for a 1-2s, very short time. Before the problem occurred the Erasing took much much more time. After that one time I cannot make to display bootloader unlocked warning and Samsung logo any more, no matter which ROM or recovery I flash.

Maybe you can try installing the original firmware and start over again.

That is what I do in the first place, I try to flash the original firmware with Odin. I use the same files as before. The only difference I can see is that after the flashing the Erase progress was very long and now it is only 1-2s and the phone turns off.

Ok, I've found my mistake and a solution. I will post it here if anyone else has a similar problem.
So while I was playing with different ROMs one of them had an instruction to flash G973FXXSCFUH5-twrp_flashable.zip that included:
modem.bin
dt.img
dtbo.img
cm.bin
sboot.bin
up_param.bin
keystorage.bin
uh.bin
The zip included was to an older firmware G973FXXSCFUH5, while I was already on newer G973FXXSEFUJ2. But the TWRP that I used to flash the zip did not protest and the process finished well. Causing the problems above of course.
Don't know why but flashing the whole original G973FXXSEFUJ2 firmware with Odin was not enough. But when I flashed G973FXXSEFUJ2-twrp_flashable.zip from the TWRP worked and made the phone operational again.

hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me

FabienGege said:
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
Click to expand...
Click to collapse
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.

.

Doman said:
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
Click to expand...
Click to collapse
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.

Mohammed_9564 said:
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Click to expand...
Click to collapse
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.

Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.

Mohammed_9564 said:
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Click to expand...
Click to collapse
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973F

Doman said:
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973
Click to expand...
Click to collapse
Thanks for the help brother I appreciate it

For months I've tried searching for a solution to fix my SM-N976U that stopped booting up. None of the symptoms shared fully matched what I was experiencing, so every fix I attempted didn't get her fully functioning again, eventually I gave up trying, stuffed the phone in a drawer and just bought another one. Today I stumbled upon your post and every symptom you described fit exactly with what happen to me, I mean to the T, minus the model and fw version. So I grabbed my SM-N976U one more time and followed your solution... and guess what??? I am now a proud owner of 2 note 10 plus'!!!
Thank you so much for taking the time to share your experience and solution!! Cheers to you bud! Have a great New Year!

Thank you~! my s10 plus is back!