Database Develop

Tempered Glass

I am looking for a screen protector for my BN Turbo. I would prefer a tempered glass solution but am willing to explore other options. Does anyone have one or can offer suggestions for one? Thanks

http://www.ebay.it/itm/291341097569?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
i got these one

danger2u said:
http://www.ebay.it/itm/291341097569?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
i got these one
Click to expand...
Click to collapse
Do you have any pics?

Superman36NYY said:
Do you have any pics?
Click to expand...
Click to collapse
didn t arrive yet
after i received i will put some pics

When I bought my turbo in October or November, I also bought the "flexible glass screen protector for droid turbo" at the Verizon store. It is a little pricey at about $25, but I really like it. They had to order it for me and it was delivered straight to me.
For what it cost, I took it to them and had one of their employees put the screen on for me. I think he did a pretty nice job of it. I have no complaints, other than the high price. ?
As far as I can tell, it has no scratches on it, but, I try not to treat it rough. Also, it is very hard to see any smudges, etc that I get on it.
It did take me a little while to get used to its edges. If you swipe from the very edge of the phone, you can feel the edge. It kind of catches your finger. I have had no problems using it. At the same time I also bought the "Speck" case from them. I like it as well, but, it is also pricey.
Before this, I always used their belt clip. I do miss that, and, "may" one of these days replace the Speck with it. But, I think the glass screen is so much better than the plastic ones.
I would buy the glass screen again. (my opinion only)

Superman36NYY said:
I am looking for a screen protector for my BN Turbo. I would prefer a tempered glass solution but am willing to explore other options. Does anyone have one or can offer suggestions for one? Thanks
Click to expand...
Click to collapse
I just received this one today.
Its not bad for the price.

I was just going to start a thread with the glass screen protectors that I've tried and whether it works or not. but just an fyi, I've used the ez guardz, they admitted to their current model having a design flaw; the edges of the screen protector doesn't adhere. Also the Ghostek I just received today has the same issue. There's one more I'm looking at on eBay and I'm going to stay away from the "flexible screen protectors" as those are the ones made by tech21 and I don't like the feel of them.

Sorry. Wrong thread.

gordonzhao said:
I was just going to start a thread with the glass screen protectors that I've tried and whether it works or not. but just an fyi, I've used the ez guardz, they admitted to their current model having a design flaw; the edges of the screen protector doesn't adhere. Also the Ghostek I just received today has the same issue. There's one more I'm looking at on eBay and I'm going to stay away from the "flexible screen protectors" as those are the ones made by tech21 and I don't like the feel of them.
Click to expand...
Click to collapse
Thanks for the info. I have read the same thing on most of the screen protector Amazon reviews. Everything from improper fit, to breakage, yellowing, dimples & valleys......
I have considered this non-tempered protector: http://www.amazon.com/Skinomi®-Tech...421509415&sr=8-1&keywords=skinomi+droid+turbo Does anyone have any experience with these?
I also sent an email to MIMEUSA because they show link for Turbo products on their site but when clicking on it nothing happens. I will post updates as soon as I hear anything from them

Superman36NYY said:
Thanks for the info. I have read the same thing on most of the screen protector Amazon reviews. Everything from improper fit, to breakage, yellowing, dimples & valleys......
I have considered this non-tempered protector: http://www.amazon.com/Skinomi®-Tech...421509415&sr=8-1&keywords=skinomi+droid+turbo Does anyone have any experience with these?
I also sent an email to MIMEUSA because they show link for Turbo products on their site but when clicking on it nothing happens. I will post updates as soon as I hear anything from them
Click to expand...
Click to collapse
Looks like film, I have their screen protector for my moto 360, first batch was over sized, they then sent me the replacements which were a lot better. I may end up going with tempered glass as well for to 360 but at the time none were available but the film ones, except the Spigen which chipped. I'm not too confident with the ones that are available now.

gordonzhao said:
Looks like film, I have their screen protector for my moto 360, first batch was over sized, they then sent me the replacements which were a lot better. I may end up going with tempered glass as well for to 360 but at the time none were available but the film ones, except the Spigen which chipped. I'm not too confident with the ones that are available now.
Click to expand...
Click to collapse
I know that it's a film protector & not tempered glass. I was wondering if anyone had any luck with it. I was also looking at the iVoler tempered glass sold on Amazon

The iVoler is great, with a few minor caveats:
• Follow instructions to the letter, making sure the screen is immaculately clean. Also, wear rubber gloves if possible. Even a minor trace of skin oils will result in spots that refuse to adhere, so be super careful.
• This particular item ships from Shengzhen, China, and takes about three weeks. Order a spare while you're ordering and waiting so ridiculously long for the item to arrive.
Aside from that, it seems to be just the ticket... It's coated, so it feels slick, stays clean and doesn't show fingerprints.

This company finally has one out, I have it on order today.
http://mimeusa.com/product/droid-turbo-ghost-glass-screen-protector/

reporting back from my last purchase.
Tried this TEMPERED GLASS Screen Protector - Slim 0.33mm Super Hardness - Crystal Clear by COVRWARE - picked it up from amazon for $9.97
The glass itself is nice. It feels like the naked screen. It's a 9H and oleophobic. Unforunately the edge adhesive halos. It's cut slightly short of the edges to in an attempt to deal with the 2.5D screen edges.
you don't notice when the screen is on, but yeah it's not a edge to edge performing adhesive. so i've left it on, as i look for a better screen protector.
i'd love to see how that mime screen protector does.

bookmonke said:
This company finally has one out, I have it on order today.
http://mimeusa.com/product/droid-turbo-ghost-glass-screen-protector/
Click to expand...
Click to collapse
Please post review and pics when you receive/install it

RyanTillery said:
The iVoler is great, with a few minor caveats:
• Follow instructions to the letter, making sure the screen is immaculately clean. Also, wear rubber gloves if possible. Even a minor trace of skin oils will result in spots that refuse to adhere, so be super careful.
• This particular item ships from Shengzhen, China, and takes about three weeks. Order a spare while you're ordering and waiting so ridiculously long for the item to arrive.
Aside from that, it seems to be just the ticket... It's coated, so it feels slick, stays clean and doesn't show fingerprints.
Click to expand...
Click to collapse
Thanks for the info. I placed the order for the iVoler. I'll post review/pics when I receive/install it

Superman36NYY said:
Thanks for the info. I placed the order for the iVoler. I'll post review/pics when I receive/install it
Click to expand...
Click to collapse
Let me know if the edges stick that's really the only issue with most of them on the market right now. I don't even want to show my phone to others because of the parts of the screen protector that doesn't adhere. Waiting on a replacement for my ghostek, if that's the same then I'm off to trying a different one.

The edges on mine are all good, with the exception of two spots where my fingers made contact with the adhesive. My hands were clean and dry, but it apparently doesn't take much to impact the performance of the adhesive. I'd recommend wearing rubber gloves during application... Other than that, it's a great fit, and covers only the flat (non-rounded) surface of the screen.

Ok got the MIME today, typical package and install. Goes on good does not go the the edge but about like the xtreme one I had installed. This one sticks so far and feels way better slickness wise than the xtreme.

bookmonke said:
Ok got the MIME today, typical package and install. Goes on good does not go the the edge but about like the xtreme one I had installed. This one sticks so far and feels way better slickness wise than the xtreme.
Click to expand...
Click to collapse
Interesting there's no cut out for the proximity sensor. Have you had any issues during phone calls? Make a phone call, and hold the phone away from your face. Does the screen still go on?

ivoler Screen Protector Great Fit!! Much better than any other brands I tried.

I got mine in the mail yesterday,and bought the ivoer screen protector on Amazon.Carefully packaged with a nice little kit, including a dust removing tape, alcohol wipe and screen cleaning cloth. Instructions were clear and direct and installation was a snap. None of the stupid bubbles that you get from the screen protectors. Tactile feel is perfect, and response from the phone after installation is unchanged and very responsive. The screen itself is high quality and flawlessly clear, the cutouts fit the phone (around the camera, speaker, etc) perfectly. Due to the phone having a slight curve towards the edge, there is no way to make glass bend that way so you will have a small (appx 1/8th inch) space where the protector ends and the phone continues. If you have a case on the phone, you will barely notice. I paid $35 to have one of these installed at Verizon on a G3, and if anything I think this $12 beauty looks even better. Just take your time to install it, and make sure you wash your hands clean of any oils before beginning. I installed it in about 60 seconds. Adhesive will not fully grip until you press it down firmly and really make sure it is on there, so you can adjust the fit if your aim is off.
Here I share the picture that have installed the screen protector, it shows very smooth and clear,It's all perfect!!

Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.
Example.. The first one is your ivoer.
The second is one of the mime protector someone posted in the other thread.
You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)
It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself

I ended up pulling the trigger for the mime ghost glass and just saw this post. I guess I will stick with it and see.

zathus said:
Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.
Example.. The first one is your ivoer.
The second is one of the mime protector someone posted in the other thread.
You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)
It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself
Click to expand...
Click to collapse
Yse, I have never had a screen protector as easy to apply and without bubbles.It fit the phone very well,this is the best source for for protecting the face of a cell phone.

I'm going to pull the trigger but Did you get the .2 or the .3 thickness?

Well got the .2 ivoler one for 12 bucks and what a freaking turd it is. It's no where cut right and is way to big for the phone. It not only hangs off the bottom but the top as well. Send them an email to see what they are going to do about it.

makavelisk said:
Well got the .2 ivoler one for 12 bucks and what a freaking turd it is. It's no where cut right and is way to big for the phone. It not only hangs off the bottom but the top as well. Send them an email to see what they are going to do about it.
Click to expand...
Click to collapse
You should have stuck with the mime. It's such a breeze to install. Plus its case friendly too. The adhesive sticks automatically to the screen as much as possible.

wadamean said:
You should have stuck with the mime. It's such a breeze to install. Plus its case friendly too. The adhesive sticks automatically to the screen as much as possible.
Click to expand...
Click to collapse
I agreed. Got this response from ivoler:
Hello
Based on the photo you sent is, you fit is correct. Please be reminded that the Droid Turbo does have curved edges on all four edges, and as the tempered glass screen protector is flat therefore it is designed to only able to cover the flat part of the screen.
Thank you
So clearly they think it is supposed to be lifted off the screen to help collect dust. Lol. I am going to take it off and send it back to Amazon and buy the mime. What a waste and a crappy company.

These are the pictures I even sent them that they state is correct fitment. The best part is that they claim it is rounded edges but they are sharp as hell. I guess you get what you pay for. Mime here I come.

Just received the .2 went on perfect adhered good all over. Within 20 minutes after it was installed I dropped my glassed they hit the Side of the screen and chipped the screen protector. You can't see it from the pic but it is starting to hairline crack...

Highly recommend iVoler screen protector for Nexus 6!!
Highly recommend iVoler screen protector for Motorola Droid Turbo!!
Installation was very easy and there is not bubble at all. It only takes me two times to install it properly. You'll just need to follow the instruction and use the tools provided with the packaging.all the cutouts are accurate and I like the fact that it does not covers the front facing camera and also the proximity sensor. The screen is HD clear and super smooth as if there is nothing on it!I'll never go back to those cheap plastic screen protectors again.

I ended up getting three replacements for from ivoler for the glue lasted only for a little while on the edges and the lint/dirt would get in there. I got fed up and got Mime and have had it on for a month with no problems whatsoever.

I can confirm that the ivoler glass screen protector fits and that the edges stick to the screen, at least for me. I don't know why some people are having the opposite experience.

I bought mine off Amazon for $6.95 for a 2 pack. I got the .2m. Ivoler screen protectors are a dust magnet. Put mine on it the bathroom as it is the best light to see if the screen is clean. Washed my hands and cleaned the screen with the provided tools. Installed it between the bevel edges. Later had ghosting. Took it off and installed the 2nd. Washed hands, cleaned screen, and when I removed the cover on the screen protector. All I heard was static electricity. Dust stuck to it as soon as I pulled the cover off. Installed of my phone and it was bad. Took its off and clean my outterbox defender case and put my turbo back in. The heck with that. Sent them a email will all my info. No picture as I do not have a camera another phone to take a picture. What good can that do. Most know that trying to get a picture if you could, would not show it well as it does in person. Got a email back and they asked for my order id and a picture. They must have not even read my email. I had my Amazon order id in the email, 2 sentence. I explained to them that I do not have a camera or another to take a picture. Also that I do not have the screen protectors on my turbo anymore. I miss Zagg screen protectors. Never had a problem like I did with ivoler. At lest I am out $6.95 vs 19.99 if you bought it from there site and that is 1 not 2 from Amazon. I doubt I will get 2 replacement or my money back. Can never go wrong with my outterbox. If the ivoler was a success install like most here had. I would have removed the screen protector in the outterbox. O well.

Got the .3 for my Droid Turbo. It's saved my screen twice in two years. Getting ready to put on the second one, as the first is all cracked up now. Very scratch resistant. Put this on somewhere super clean. I have dogs and cats with super fine fur. A hair you can't even see will make you curse.

Is this the Droid turbo or the droid 2 ?
zathus said:
Here's an observation I made. And it's kind of how I judge the quality before I purchase. The Droid turbos corners are not A straight 90 degree. It tapers down and then 90s across to a slight taper. You can tell the cheap glass screen protectors because they're not cut to this taper. They come straight down and then they 90.
Example.. The first one is your ivoer.
The second is one of the mime protector someone posted in the other thread.
You can clearly see what I'm talking about. So with that, the ivoer is much more impressive to me. Thanks for the info on its quality. I'll be buying one. =)
It is the small attention to details that can show the difference between someone who took just the dimensions. And someone who actually sized up to the phone itself
Click to expand...
Click to collapse

rick302 said:
Is this the Droid turbo or the droid 2?
Click to expand...
Click to collapse
Pictures clearly show both are Droid Turbo (Quark).

ChazzMatt said:
Pictures clearly show both are Droid Turbo (Quark).
Click to expand...
Click to collapse
Like the looks of the fit... even though it falls slightly short of the full screen that's probably why it fits so well. Also I have not seen the ivoler in the .3 VERSION for the turbo (all the ivoler .3 screen protectors I have found say the are for the turbo 2) in any case I have ordered the .2 version for my phone.
---------- Post added at 01:16 PM ---------- Previous post was at 12:32 PM ----------
rick302 said:
Like the looks of the fit... even though it falls slightly short of the full screen that's probably why it fits so well. Also I have not seen the ivoler in the .3 VERSION for the turbo (all the ivoler .3 screen protectors I have found say the are for the turbo 2) in any case I have ordered the .2 version for my phone.
Click to expand...
Click to collapse
Update after a little more searching I found the .3 version on Amazon ... so I will give it a go as well... should have plenty of spares . I currently have a Otckicks on my Droid Turbo but it does not seal well around the edges. Also I am using the Otterbox commuter case which is less bulky than the defender and the Lifeproof base as well, both of which are good but bulky... however the Lifeproof case really muffled the sound on the Turbo.

Suggestions for screen protector

Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.

Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.

The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.

hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg

Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/

olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.

Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too

tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.

I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app

I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics

enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.

Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.

Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/

asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.

I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.

jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936

Finally a proper fitting glass screen protector.

I have tried many and finally found one that actually fits. Until now the best one I have seen is the non glass protector made by Skinobi (for those that like plastic ones use it). However in the glass department they all sucked. The Qoosea one fit but it's about as cheap as you can get construction wise. It's curved but it only has a small amount of basic adhesive along the edges. So basically pocket lint can get under the screen and get stuck there. Also since it doesn't fully sit on the screen sometimes using the screen itself can be a hassle due to poor touch detection. Well all I can say is thank god Top Ace came out with one recently and actually got it right.
It's curved glass, plenty of adhesive on the side that counts and by god it actually fits perfectly. Things line up where they are supposed too. Anyway figured this deserved it's own post since finding a glass protector for this phone can be a pita at times due to the curved edges. Posted a link below, hope it helps. https://www.amazon.com/gp/product/B01M3MZQTK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I got mine yesterday and I can confirm that yes, this one actually fits great. I bought 2 in case they don't make them anymore when the first one eventually breaks.

From the pictures and one of the latest reviews it looks like this screen protector covers up the light sensor. Are there any completely clear screen protectors that fully covers the front?

Just read one of the comment said it covers the sensor that the phone is unable to turn on the screen automatically during a call when you put it away from your face. Anyone can confirm it?

I bought one on Ebay and it arrived and had curvy edges, but the idiots had sent me one for the full-size Xperia X even though it was in a packet marked X Compact. Way too big. Now I have to fight for a refund.

itandy said:
Just read one of the comment said it covers the sensor that the phone is unable to turn on the screen automatically during a call when you put it away from your face. Anyone can confirm it?
Click to expand...
Click to collapse
Mine had the sensor cut out and everything was right where it was supposed to be. Maybe he got the wrong one not sure. I went with the black one and it was fine.

Halftrack said:
Mine had the sensor cut out and everything was right where it was supposed to be. Maybe he got the wrong one not sure. I went with the black one and it was fine.
Click to expand...
Click to collapse
Anyone know of a UK source for these or a seller who will post to the UK on Ebay/Aliexpress etc?
I too bought one that only sticks to the edge of the phone and it's already got a piece of dust underneath it! I love being able to swipe from the edge with the curved edges and I love the longevity of glass screen protectors, but it's horrible to use as it's just floating a bit off the surface of the phone and makes a click noise/feel when I tap. I asked a load of Ebay sellers and they all said their glass curved screen protectors only stick around the edge of the phone.
Thanks.

Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany

mindaffecter said:
Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany
Click to expand...
Click to collapse
Based on them saying all over the website "Please be noted the adhesive is visible on the edge of CURVED Glass Protector" I imagine these ones only have glue on the edges too.

If anyone is wondering, I've attached a photo of what happens if you use a generic glass Ebay curved screen protector that only has glue on the very edges for a fortnight! Lots of dust has crept in through the speaker holes etc - the white dots showing are all dust UNDER the screen protector. I'm going to buy a plastic one that will stick properly.

I bought this: https://www.amazon.com/dp/B01N8XMXGB
Seems like it just ran out of stock though.
edit: I asked the seller and they said they will not restock it, so I guess this will be the last time you'll see it.

mindaffecter said:
Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany
Click to expand...
Click to collapse
I did. I paired it with the aluminum bumper and while the bumper is top quality as usual with devilcase products, I can't say the same for the screen protector.
The screen protector does fit perfectly but it collects dust behind it after few weeks and the responsiveness and consistency of the touchscreen are compromised.
I've been looking for an alternative to buy in Europe but found none. Topace is not an option as is in stock only on Amazon USA. If anyone has suggestions it would be greatly appreciated.

SANGER_A2 said:
I bought one on Ebay and it arrived and had curvy edges, but the idiots had sent me one for the full-size Xperia X even though it was in a packet marked X Compact. Way too big. Now I have to fight for a refund.
Click to expand...
Click to collapse
I had the same problem and got refunded. Ordered from different seller and got the correct sized one. The item itself is bad. It feels plastic, touch is not always responsive and swipe gesture for opening menu drawer is hard. I need to really press the edge before doing the slide. Screen feel more distance and it feels there are separation between the protector and the screen.
I replaced it with a generic plastic screen protector which actually feels better, easier to make slide gesture, seems more seamless. The ebay curved screen protector is really that bad. I am going to keep using the plastic one and cut a new one to fit it more properly. I also need to check how to prevent it is being lifted up accidentally from the dangling side. I can stand the dust on the dangling side, but i hate when it is lifted up and the lint is actually below the screen protector.

My experience
This is the reference for my second e-bay cover it does not have dust and has lasted much longer than my first that did.
My recollection is that there is adhesive everywhere.
232332938786

sappermajor said:
This is the reference for my second e-bay cover it does not have dust and has lasted much longer than my first that did.
My recollection is that there is adhesive everywhere.
232332938786
Click to expand...
Click to collapse
No. You are wrong. I bought one based on your recommendation and it's just another rubbish one that only only has glue in thin strip round the edges that will allow dust to creep in the speaker/camera holes and scratch the screen. More negative feedback to leave!
Why do not manufacturers produce a curved screen protector that's made properly!?! The glue can't be that expensive! [emoji36]
Sent from my F5321 using Tapatalk

Finally, Tempered glass inexpensive full back adhesive for the Note

Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. I have to say first that I was VERY Skeptical of this tempered glasses claim to have full adhesive and stick to the phone properly. I am one of those people who has literally tried an insane amount of tempered glasses I think Amazon had to offer, finally settling on the Dome Glass but if /when it breaks you are shelling out another 45 bucks plus the install procedure can be a bit much for some.
But anyway this tempered glass went on so easy with the provided guard rail I truly couldn’t believe it. It laid down and adhered to the phone with a little help from the provided squeegee then I just pressed the edges down and voila!! The ENTIRE glass protector lays down edges and everything no bubbles. Went on just as easy as a tempered glass for a flat screen. This tempered glass is just what I have been looking for since I got my Note 8. Well done… SingularityProducts
Pros:
1. Very easy install with tools provided
2. True tempered glass
3. Fingerprints and smudges are minimal and wipe off easily
4. No dot matrix
5. Touch screen sensitivity stayed not hampered
6. Was $13.89 when I bought mine, but now I see it is $18.89 still better than $45, $34, etc the others with this claim cost
Cons:
1. I truly could not think of one con, very happy with this product I am buying another right now in case this one breaks
2. Price increase from $13.89 to $18.89
https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Pics or I don't believe it
Sent from my Pixel 2 XL using Tapatalk

I think I got something similar to this. Php 1,300 so around $25.
It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.
I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.
Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.
Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.
I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...

raphael.atienza said:
I think I got something similar to this. Php 1,300 so around $25.
It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.
I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.
Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.
Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.
I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...
Click to expand...
Click to collapse
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.

I think these are the same full adhesive protectors offered at AliExpress. Ordered one 3 weeks ago. Crap. Bubbles, cuts parts of display left, right, top, bottom. Inacceptable, full adhesive or not. Got it refunded and would not order it again.
Gesendet von meinem SM-N950FD mit Tapatalk

raphael.atienza said:
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.
Click to expand...
Click to collapse
If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
ayinde6 said:
Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. <SNIP>
https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Please post pictures as proof.

Mr. Orange 645 said:
If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Please post pictures as proof.
Click to expand...
Click to collapse
Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.

raphael.atienza said:
Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.
Click to expand...
Click to collapse
Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.

Mr. Orange 645 said:
Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.
Click to expand...
Click to collapse
Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?
Also which S-Pen Tip are you using the grey or the black one?

raphael.atienza said:
Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?
Also which S-Pen Tip are you using the grey or the black one?
Click to expand...
Click to collapse
Iit's the Armor suit Wet apply one it's not TPU, but is a soft screen protector.
I'm using the black tip. the white one was too hard and really dug into the screen protector.

Photos pf singularity tempered glass
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
It's that full adhesive?

borijess said:
It's that full adhesive?
Click to expand...
Click to collapse
The first post explains it.
ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
That looks great! Looks like I'll be ordering one soon.

ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
Ooooh. Looks nice! Might order this...

raphael.atienza said:
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.
Click to expand...
Click to collapse
The one that I bought myself the box is different from yours and mine covers the screen fully, well more than this one.

borijess said:
It's that full adhesive?
Click to expand...
Click to collapse
Yes adhesive on the entire back of the screen

Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free

ayinde6 said:
Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free
Click to expand...
Click to collapse
Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?

Mr. Orange 645 said:
Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?
Click to expand...
Click to collapse
Yes I used to jig that came with it and IMO it is perfect it sits "right" below the selfie cam yeah I think I am set for screen protection for now may be I will re-review in a couple of weeks, see how it holds up.

Here are some more pics to show screen coverage. Again I am not a photographer lol I use the edge screen Sidebar a lot with no issues.