SM-T550 Tab A 9.7 wifi only was spotted running Android 7 for wifi testing recently which could mean the device will see the upgrade sooner than later. Source SamFirmware dot com.
PDF of test View attachment Certificate_WFA59137.pdf
galaxy-tab-a-9-7-spotted-running-android-7-0-nougat/
It's too old to get updated lol(And already replaced by A6 10)
Wysłane z mojego SM-T585 przy użyciu Tapatalka
Samsung flagship tablets historically have got 2 major updates.
However the Tab A isn't a flagship device, so it's a bit so so as to what that update is all about.
I wouldn't hold my breath.
I also have the Tab A6 7 which hasn't had one major update. Its stuck with LL 5.1.
Well just seen on sammobile that the SM-T555 has started to be updated to 7.1.1. So hopefully the SM-T550 will follow shortly.
chrisjwild said:
Well just seen on sammobile that the SM-T555 has started to be updated to 7.1.1. So hopefully the SM-T550 will follow shortly.
Click to expand...
Click to collapse
Curious... 555 and 550 have same processor and hardware. What would make the 555 lte firmware not work on the 550 wifi?
bobfrantic said:
Curious... 555 and 550 have same processor and hardware. What would make the 555 lte firmware not work on the 550 wifi?
Click to expand...
Click to collapse
That's what I'm thinking but don't want to try flash it and break my tab. Lol
chrisjwild said:
That's what I'm thinking but don't want to try flash it and break my tab. Lol
Click to expand...
Click to collapse
It likely won't boot that is all. The kernels are not interchangeable.
ashyx said:
It likely won't boot that is all. The kernels are not interchangeable.
Click to expand...
Click to collapse
True. Will be waiting patiently with the rest for the official one.
bobfrantic said:
Curious... 555 and 550 have same processor and hardware. What would make the 555 lte firmware not work on the 550 wifi?
Click to expand...
Click to collapse
it works OK, just that you will get Phone stuff on 550 wifi version, which may not cause any issue, but probably cause battery drain since it will try to look for phone stuff..etc..
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
ashyx said:
It likely won't boot that is all. The kernels are not interchangeable.
Click to expand...
Click to collapse
it boots OK both device has the same specs (both has Qualcomm Snapdragon 410 8916)...I download 555 firmware (7.1.1), and build the ROM using SuperRs Kitchen, and flash to my SM-T350 (identical to SM-T550)...is it stable? of course not..but it booted...
jazzespresso said:
it works OK, just that you will get Phone stuff on 550 wifi version, which may not cause any issue, but probably cause battery drain since it will try to look for phone stuff..etc..
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
it boots OK both device has the same specs (both has Qualcomm Snapdragon 410 8916)...I download 555 firmware (7.1.1), and build the ROM using SuperRs Kitchen, and flash to my SM-T350 (identical to SM-T550)...is it stable? of course not..but it booted...
Click to expand...
Click to collapse
Yes but did you boot with the T555 boot image?
In my experience Marshmallow T550 boot images do not boot on the T555.
Still waiting for the update for SM-T550
ashyx said:
Yes but did you boot with the T555 boot image?
In my experience Marshmallow T550 boot images do not boot on the T555.
Click to expand...
Click to collapse
I used T555 boot image (that comes with firmware)...I was kind of experimenting to see if it will book and works, so my build pretty much experimental build...and yes I was surprised it booted OK...but did not spent a lot of time to see what other stuff works or any FCs...like I said in previous post, it is pretty unstable though..maybe I will spend some more time and see if I can make it stabale, but thinking since this one got 7.1.1, I am sure SM-T350/T550 should be on way in very soon!
SM-T550. First to be reported running 7.1.1 and last to get updated. WTF is that all about?
jazzespresso said:
I used T555 boot image (that comes with firmware)...I was kind of experimenting to see if it will book and works, so my build pretty much experimental build...and yes I was surprised it booted OK...but did not spent a lot of time to see what other stuff works or any FCs...like I said in previous post, it is pretty unstable though..maybe I will spend some more time and see if I can make it stabale, but thinking since this one got 7.1.1, I am sure SM-T350/T550 should be on way in very soon!
Click to expand...
Click to collapse
Man we meet again! You're rocking Sammy tablet right now? I have Tab A6 10.1 LTE much better than our old S8
Sent from Galaxy Tab A10 with 7300 battery ))
Minto107 said:
Man we meet again! You're rocking Sammy tablet right now? I have Tab A6 10.1 LTE much better than our old S8
Sent from Galaxy Tab A10 with 7300 battery ))
Click to expand...
Click to collapse
not much doing developer nor building ROMs used to be:silly:, it is that I have Tab A SM-350 lying down, eating dust, so figured out may be bring some fresh air to the tablet.
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
bobfrantic said:
SM-T550. First to be reported running 7.1.1 and last to get updated. WTF is that all about?
Click to expand...
Click to collapse
SM-T350 got 7.1.1, so pretty sure SM-550 around the corner!
jazzespresso said:
.
SM-T350 got 7.1.1, so pretty sure SM-550 around the corner!
Click to expand...
Click to collapse
Maybe, I see the SM-P550 has 7.1.1 now so....
jazzespresso said:
not much doing developer nor building ROMs used to be:silly:, it is that I have Tab A SM-350 lying down, eating dust, so figured out may be bring some fresh air to the tablet.
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
SM-T350 got 7.1.1, so pretty sure SM-550 around the corner!
Click to expand...
Click to collapse
So did T355Y
This is just a joke. Saw an update for the SM-T550 for China on samsung updates live, and it is 6.0.1 still. Not for 7.1.1! getting frustrating to say the least...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When Android Nougat for Samsung Galaxy Tab A 9.7 WiFi T550?
I think we should send messages to samsung on twitter and ask when the update for samsung galaxy tab a 9.7 wifi t550 and ask you also give us oreo in a future, we are the users that they work should learn to apple that gives 5 years support to their devices.
csar9804 said:
I think we should send messages to samsung on twitter and ask when the update for samsung galaxy tab a 9.7 wifi t550 and ask you also give us oreo in a future, we are the users that they work should learn to apple that gives 5 years support to their devices.
Click to expand...
Click to collapse
I did ask on twitter and got this response:
SamsungBelgiqueVerified account @samsungBelgique Oct 23
More
Replying to @bobfrantic
Those dates are in some big safe which I can't open sadly. We simply don't have that information. ^Kiefer
0 replies 0 retweets 0 likes
Related
is it still possible for our Ace to get an unofficial Lollipop rom? or is development for this phone basically dead by now?
will kitkat be our last?
emokid117 said:
is it still possible for our Ace to get an unofficial Lollipop rom? or is development for this phone basically dead by now?
will kitkat be our last?
Click to expand...
Click to collapse
Lollipop uses art as its default runtime. Would be tough to make it for an armv6 with dalvic.
Falcon G said:
Lollipop uses art as its default runtime. Would be tough to make it for an armv6 with dalvic.
Click to expand...
Click to collapse
ART requires at least a 1.2 Ghz quad-core CPU to work properly. So future single-core/dual-core ones will ship with 4.4.2 instead.
KAGE-008 said:
ART requires at least a 1.2 Ghz quad-core CPU to work properly. So future single-core/dual-core ones will ship with 4.4.2 instead.
Click to expand...
Click to collapse
Umm that's not true. Moto E has a dual core processor and will receive lollipop in a matter of few weeks
let it release guys
Falcon G said:
Umm that's not true. Moto E has a dual core processor and will receive lollipop in a matter of few weeks
Click to expand...
Click to collapse
guys let lollipop first release, come to some phones im sure after some one will obviously port it for our device. have patience guys our ace will taste sweet lollipop or atleast we will
emokid117 said:
is it still possible for our Ace to get an unofficial Lollipop rom? or is development for this phone basically dead by now?
will kitkat be our last?
Click to expand...
Click to collapse
nothings impossible mate.It just takes time and some brains together
Lollipop's source is now submitted to AOSP. But I don't think the SGA will ever run CM12 due to the fact Dalvik is completely absent. Think logically: when OpenGL ES 2.0 was mandatory on Android 4.0, older phones which still used OpenGL ES 1.1 didn't even receive a stable port of it. Now the limitation here is the runtime and not GPU libraries like 3 years ago.
1.
IamsKs said:
guys let lollipop first release, come to some phones im sure after some one will obviously port it for our device. have patience guys our ace will taste sweet lollipop or atleast we will
Click to expand...
Click to collapse
I wasn't being impatient just telling the guy who posted above me that his information isn't true [emoji6]
Have a nice day!
I hope we can get it, I have a Moto G now, but I'd love to take raw pics since the camera is better
KAGE-008 said:
ART requires at least a 1.2 Ghz quad-core CPU to work properly. So future single-core/dual-core ones will ship with 4.4.2 instead.
Click to expand...
Click to collapse
We are running ART on 1.0GHz single-core.
Devs at AndroidARMv6 are working on something...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ale29-09 on Nexus⁴ and Tapatalk Pro™
Ready For CM12 !
ale29-09 said:
Devs at AndroidARMv6 are working on something..
ale29-09 on Nexus⁴ and Tapatalk Pro™
Click to expand...
Click to collapse
There have some Cooper CM12 Nightly User Debug build already
Go to "androidarmv6.org/view/All/job/cm-experimental/1290/"
To download click on the "cm-12-20141222-EXPERIMENTAL-cooper.zip"
Now downloading
TIC[email protected] said:
There have some Cooper CM12 Nightly User Debug build already
Go to "androidarmv6.org/view/All/job/cm-experimental/1290/"
To download click on the "cm-12-20141222-EXPERIMENTAL-cooper.zip"
Now downloading
Click to expand...
Click to collapse
Any idea as to which recovery i should use? I used the latest CWM I could find "6.0.5.3_1" but the installation aborts. Thanks.
[email protected] said:
There have some Cooper CM12 Nightly User Debug build already
Go to "androidarmv6.org/view/All/job/cm-experimental/1290/"
To download click on the "cm-12-20141222-EXPERIMENTAL-cooper.zip"
Now downloading
Click to expand...
Click to collapse
Tried today's build. Installed Cyanogen recovery first but Rom fails to install. Had to use Odin to restore CWM and nandroid.
Anyone get this to work? What recovery is required?
Edit seen developers posts relating to this. Not ready for users yet. We'll have to be patient.
Sent from my HTC One
d.blaze21 said:
Any idea as to which recovery i should use? I used the latest CWM I could find "6.0.5.3_1" but the installation aborts. Thanks.
Click to expand...
Click to collapse
mitchst2 said:
Tried today's build. Installed Cyanogen recovery first but Rom fails to install. Had to use Odin to restore CWM and nandroid.
Anyone get this to work? What recovery is required?
Edit seen developers posts relating to this. Not ready for users yet. We'll have to be patient.
Sent from my HTC One
Click to expand...
Click to collapse
Yeah, me too. I get symlink error. If I"m not mistaken, after reading the log file I found that while extracting some package to our Ace's internal storage, there's an error showed that storage not enough and CWM ignored it, skip the package extracting process. After that, according to update-script, after extracting the package it will make some folder (MKDIR), but also failed. Then CWM ignored it again, skip it to the symlink process. Because not all files are extracted, so the symlink process failed, and you will get " Installation Aborted."
Should our Ace end up with CM11 ?
I will soon upload the log file for reference.
The download link is down can any give me a new working one
---------- Post added at 08:27 AM ---------- Previous post was at 07:57 AM ----------
I have searched the armv6 website and here is the last build link
http://jenkins.androidarmv6.org/job/cm-experimental/1303/
And to keep you self always up to date go here
http://jenkins.androidarmv6.org/job/cm-experimental/
madkita said:
The download link is down can any give me a new working one
---------- Post added at 08:27 AM ---------- Previous post was at 07:57 AM ----------
I have searched the armv6 website and here is the last build link
jenkins.androidarmv6.org/job/cm-experimental/1303/
And to keep you self always up to date go here
jenkins.androidarmv6.org/job/cm-experimental/
Click to expand...
Click to collapse
Here's the link you want :
androidarmv6.org/view/All/job/cm-experimental/1303/artifact/archive/cm-12-20150103-EXPERIMENTAL-cooper.zip
Whatever tgat is the same file
Did any one knows about this mount errors
"Script aborted mount () expected 4 got 5
Because its the only thing that stop's cm12 from being installed right now
madkita said:
Whatever tgat is the same file
Did any one knows about this mount errors
"Script aborted mount () expected 4 got 5
Because its the only thing that stop's cm12 from being installed right now
Click to expand...
Click to collapse
Emm ..., I'm not so clear
And there's log file attached for reference.
Just checked for software update this morning
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Security patch level July 1, and build number is now APG1
Has anyone tried to root on this new patch?
Sent from my SAMSUNG-SM-G935A using Tapatalk
"Current software is up to date" , clear data, repeat.
downloading now...feels like Christmas morning with WiFi calling be added...about time ATT
Saw this on my rooted phone this morning lol. Wonder if any brave souls that are rooted have tried this yet? Never thought these phones would ever achieve root, so I just updated like most people.
Phone on my other line got the update, but I haven't got mine yet. What gives? Non-rooted and everything.
Bobo Raketa said:
Just checked for software update this morning
View attachment 3825491
View attachment 3825492
View attachment 3825493
Security patch level July 1, and build number is now APG1
Click to expand...
Click to collapse
Boom! Wifi calling works andddddd mobile hotspot works on grandfather unlimited plan. No need to root ever.....my phone can do everything it is supposed to do now!
---------- Post added at 02:57 PM ---------- Previous post was at 02:47 PM ----------
Escobar27 said:
Boom! Wifi calling works andddddd mobile hotspot works on grandfather unlimited plan. No need to root ever.....my phone can do everything it is supposed to do now!
Click to expand...
Click to collapse
spoke too soon the wifi hotspot works for wifi connections not the 4glte hotspot
I noticed that the memory view in settings is now gone with this update
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
Alaris said:
I noticed that the memory view in settings is now gone with this update
Click to expand...
Click to collapse
also noticed that we can now scale the screen smaller
Alaris said:
I noticed that the memory view in settings is now gone with this update
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
also noticed that we can now scale the screen smaller
Click to expand...
Click to collapse
Correct.
Running On Samsung Galaxy S7 Edge G935A Wicked Dark Carnage Edition Theme
Advanced messaging!
Tikerz said:
Advanced messaging!
Click to expand...
Click to collapse
If your asking yes now it has it.
Running On Samsung Galaxy S7 Edge G935A Wicked Dark Carnage Edition Theme
Anyone find the files?
Wanting to move back from t-mobile firmware but stuck due to different bootloader builds, 2 on att, 3 on tmo
Can someone try the engboot please? I don't want to lol.
Sent from my VK815 using XDA-Developers mobile app
Skizzy034 said:
Can someone try the engboot please? I don't want to lol.
Sent from my VK815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Id do it if I was on the at&t firmware lol. Know how to extract the firmware?
tjthecat said:
Id do it if I was on the at&t firmware lol. Know how to extract the firmware?
Click to expand...
Click to collapse
This newest fw needs to be leaked first. Like I said, at&t won't release it officially. But there's a chance root will work since it's an engboot and if the bootloader wasn't updated to v3, you should be able to flash pf2.
Sent from my VK815 using XDA-Developers mobile app
Unfortunately, when I flashed over to the t-mobile firmware, my bootloader was updated to v3... im unsure if at&ts latest update has it though but im hoping
Skizzy034 said:
This newest fw needs to be leaked first. Like I said, at&t won't release it officially. But there's a chance root will work since it's an engboot and if the bootloader wasn't updated to v3, you should be able to flash pf2.
Sent from my VK815 using XDA-Developers mobile app
Click to expand...
Click to collapse
tjthecat said:
Unfortunately, when I flashed over to the t-mobile firmware, my bootloader was updated to v3... im unsure if at&ts latest update has it though but im hoping
Click to expand...
Click to collapse
Not sure but with the new update i went in recovery and i saw something with v3 in there .
Running On Samsung Galaxy S7 Edge G935A Wicked Dark Carnage Edition Theme
Thanks, for letting me know, now to get ahold of it. Anyone know a way to extract firmware from smart switch? there is an unmodified s7 edge in my house but i need to figure out how to extract it. temp files in windows through smart switch?
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
p.s. this is probably one of the first times ive actually participated on xda and am loving the atmosphere of everyone
Venom0642 said:
Not sure but with the new update i went in recovery and i saw something with v3 in there .
Running On Samsung Galaxy S7 Edge G935A Wicked Dark Carnage Edition Theme
Click to expand...
Click to collapse
Checked out my phone's bootloader out of curiosity, and apparently it's still v2 after the update.
Longcat14 said:
Checked out my phone's bootloader out of curiosity, and apparently it's still v2 after the update.
Click to expand...
Click to collapse
thanks...
Haven't seen this posted here yet, so making a thread.
yeah, lineageos-13. android 6.0. on the atrix hd. nothing special. This is just pure lineage sources. plus the signature patches for microg. I've been out of the android scene for a while, but my wife got an atrixhd to replace her missing s4, and I couldn't stand seeing just 5.1 on it.
heres the part you might want, a download link: https://www.mediafire.com/?afybm6x0isiaas8
I've been away from android for a while, and my last android related project was just root stuff for the chromecast, so don't expect me to be too active. let me know if you find bugs, and I'll try to fix if i have the time.
[working]
wifi
cam
cellular data
it boots
etc.
[bugs]
none reported yet
Thank you for the link. Mom uses this as her primary phone. Waiting for the update regarding bugs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proof so people don't think its fake as it seems this is the first cm13 rom pasted here
cammykool said:
Proof so people don't think its fake as it seems this is the first cm13 rom pasted here
Click to expand...
Click to collapse
Hi, is everything working fine? Any bugs?
crossxn said:
Hi, is everything working fine? Any bugs?
Click to expand...
Click to collapse
cammykool is my friend who wanted to post a screenshot for proof. he doesnt have an atrix. my wife has been using it yesterday and today and hasnt complained about anything. so seems to be working fine. cell radio is still untested. but it can read and pin unlock a sim.
Great job!!! is it a stable or nightly release??thank you!!
Mario85mc said:
Great job!!! is it a stable or nightly release??thank you!!
Click to expand...
Click to collapse
its based off the last cyanogenmod source, so not an official stable build. also not a nightly. dont have the time to do nightly builds.
awesome work man! gonna bring back my ahd from the dead just because of this.
tvall said:
its based off the last cyanogenmod source, so not an official stable build. also not a nightly. dont have the time to do nightly builds.
Click to expand...
Click to collapse
i installed the rom and the first bug i can find is that u cant select between 2g/3g it always remains to lte though there is no lte option on my carrier but it goes to hspa so how to force it to only 2g mode i need to save battery though thanks
mega_man said:
i installed the rom and the first bug i can find is that u cant select between 2g/3g it always remains to lte though there is no lte option on my carrier but it goes to hspa so how to force it to only 2g mode i need to save battery though thanks
Click to expand...
Click to collapse
Try using this app to switch:
https://play.google.com/store/apps/details?id=diewland.testing.phone&hl=en
hp420 said:
Try using this app to switch:
https://play.google.com/store/apps/details?id=diewland.testing.phone&hl=en
Click to expand...
Click to collapse
tried without app phone has bulit in fucntion when u dial the code and it doesnt even switch there
Google Chrome Crashes upon startup, as well as the dev and beta builds of chrome.
Gizoid1337 said:
Google Chrome Crashes upon startup, as well as the dev and beta builds of chrome.
Click to expand...
Click to collapse
Hi, how is the call quality? Any major bugs?
crossxn said:
Hi, how is the call quality? Any major bugs?
Click to expand...
Click to collapse
I've been using my atrix hd as a music player mostly, awaiting a sim card adapter to fit a iphone 6s nano sim to a micro sim slot.
Great ROM! I have a few motorola MB886's and I tried flashing this ROM using philz_touch 6.58.7_moto_msm8960 recovery. So far ok.
so wifey just got a new phone/plan from metropcs. so if you find any bugs, i can still try to fix. but might be more delayed now that shes not depending on it.
tvall said:
Haven't seen this posted here yet, so making a thread.
heres the part you might want, a download link: http://cammykool.com/stuffs/android/atrixhd/cm-13.0-20161227-UNOFFICIAL-mb886.zip
Click to expand...
Click to collapse
Hi!
I can't download it now
Can you reload zip, please?
crossxn said:
Thank you for the link. Mom uses this as her primary phone. Waiting for the update regarding bugs
Click to expand...
Click to collapse
i have installed the rom. and its working fine. there are minor bugs. like
wifi icon is not showing incoming and outgoing signals
in recent apps sections, there is a black bar in the right corner of apps
when you go for calling, there are some red lines for a sec
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
crossxn said:
Hi, is everything working fine? Any bugs?
Click to expand...
Click to collapse
i have installed the rom. and its working fine. there are minor bugs. like
wifi icon is not showing incoming and outgoing signals
in recent apps sections, there is a black bar in the right corner of apps
when you go for calling, there are some red lines for a sec
---------- Post added at 02:07 PM ---------- Previous post was at 02:04 PM ----------
Gizoid1337 said:
Google Chrome Crashes upon startup, as well as the dev and beta builds of chrome.
Click to expand...
Click to collapse
its not the fault of this ROM. i was using cm12.1 before this one and it was happening me there too. i think its a fault from Google. they should fix it. this rom is working fine.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
crossxn said:
Hi, how is the call quality? Any major bugs?
Click to expand...
Click to collapse
i have installed the rom. and its working fine. there are minor bugs. like
wifi icon is not showing incoming and outgoing signals
in recent apps sections, there is a black bar in the right corner of apps
when you go for calling, there are some red lines for a sec
---------- Post added at 02:09 PM ---------- Previous post was at 02:08 PM ----------
tvall said:
so wifey just got a new phone/plan from metropcs. so if you find any bugs, i can still try to fix. but might be more delayed now that shes not depending on it.
Click to expand...
Click to collapse
i have installed the rom. and its working fine. there are minor bugs. like
wifi icon is not showing incoming and outgoing signals
in recent apps sections, there is a black bar in the right corner of apps
when you go for calling, there are some red lines for a sec
---------- Post added at 02:11 PM ---------- Previous post was at 02:09 PM ----------
lom-off said:
Hi!
I can't download it now
Can you reload zip, please?
Click to expand...
Click to collapse
link was updated. kindly check it now. i have installed the ROM and its working fine.
@thehassanrasool Read here to fix Google Chrome crashes: https://forum.xda-developers.com/showpost.php?p=70762641&postcount=198
Thank you!
What about root?
It is not working at start.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MODIFICATIONS
Base B06 and B08 7.1.1 MiFvaorUI 5.0.
Init.d enabled.
Dm-Verity disabled.
Many applications removed.
Magisk 1.4.
6 reset options with color icons.
0.25 scale animations on startup.
Cpuvisor.
AdAway.
Bravia Engine v4.
Added fonts.
Disable signature verification.
New additions to build.prop.
And more things I do not remember..
DOWNLOAD
Bootstack universal
https://www.androidfilehost.com/?w=files&flid=148464
Bootstack B06
https://mega.nz/#!k5FAUDZY!Mw4lCy353HbO2vRRkSgEhsXR26D412jU_lvQNPYM_Qo
ROM
https://mega.nz/#!4kcX3CzJ!cKzV5LwT7MbsoNoMtRvfOps7Cso0tIF3bNbDMspKgCs
INSTALLATION
Have Universal Bootstack or Bootstack of the B06.
Have the final version of the TWRP.
Insert the rom into the SD card.
Start in recovery mode and make a backup.
Wipe data / factory reset.
They go to advanced wipe and label all but Micro SDCard and OTG and Data.
They go to install, they look for the zip and install it.
Restart and wait until the ROM is startedThanks
@dcobos: For all the time it took to climb the mega rom. thank you very much friend
To the group Zte Axon7 of telegran: For testing all mod and proposing new ideas.
@jeboo: Extended Power Menu.
@gharrington For smalis and apk
BUGS
For now it is not possible to change the theme. will be solved soon..
FIX (obligatory)
Fix color calibration
MODS
Will this work on A2017u
joemossjr said:
Will this work on A2017u
Click to expand...
Click to collapse
Not yet. In a few days will be available.
Cool thabks
joemossjr said:
Will this work on A2017u
Click to expand...
Click to collapse
it works i think. first install bootstack and flash rom. delete nhlos from bootstack before flash to keep imei.
kenet said:
Not yet. In a few days will be available.
Click to expand...
Click to collapse
So there will be a 2017U version? Awesome!
Will there be a version on the A2017 Chinese variant?
joemossjr said:
Will this work on A2017u
Click to expand...
Click to collapse
kenet said:
Not yet. In a few days will be available.
Click to expand...
Click to collapse
KnightStar said:
So there will be a 2017U version? Awesome!
Click to expand...
Click to collapse
mario32 said:
Will there be a version on the A2017 Chinese variant?
Click to expand...
Click to collapse
I was using BadBoyz which was made for the U model, on my G model, so this should work for all of you.
Just use the latest bootstack for your specific model, not the one attached on the first post here.
Flash through the latest TWRP and reboot.
No need to make a seperate U or A version.
nfsmw_gr said:
I was using BadBoyz which was made for the U model, on my G model, so this should work for all of you.
Just use the latest bootstack for your specific model, not the one attached on the first post here.
Flash through the latest TWRP and reboot.
No need to make a seperate U or A version.
Click to expand...
Click to collapse
Let's see if anyone tests it and updates the post with the bootstack for each model.
Thank you very much
kenet said:
Let's see if anyone tests it and updates the post with the bootstack for each model.
Thank you very much
Click to expand...
Click to collapse
I'm sure it works but I'll test it today and will post this topic.
Using it right now on b25 no issues as far as I can tell running smooth
---------- Post added at 12:05 AM ---------- Previous post was at 12:02 AM ----------
Correction volte not working with T-Mobile seems like Wi-Fi calling isn't either
---------- Post added at 12:14 AM ---------- Previous post was at 12:05 AM ----------
This is by far the fastest and smooth stock Tom I've ever tried! It's awesome!
joemossjr said:
Using it right now on b25 no issues as far as I can tell running smooth
---------- Post added at 12:05 AM ---------- Previous post was at 12:02 AM ----------
Correction volte not working with T-Mobile seems like Wi-Fi calling isn't either
---------- Post added at 12:14 AM ---------- Previous post was at 12:05 AM ----------
This is by far the fastest and smooth stock Tom I've ever tried! It's awesome!
Click to expand...
Click to collapse
Thanks. Any special tricks for flashing?
Nope litteraly just wiped everything and flashed clean booted up within like 30 seconds
joemossjr said:
Using it right now on b25 no issues as far as I can tell running smooth
---------- Post added at 12:05 AM ---------- Previous post was at 12:02 AM ----------
Correction volte not working with T-Mobile seems like Wi-Fi calling isn't either
---------- Post added at 12:14 AM ---------- Previous post was at 12:05 AM ----------
This is by far the fastest and smooth stock Tom I've ever tried! It's awesome!
Click to expand...
Click to collapse
What do you mean you're using this on B25? This ROM is based off B05 and if you flashed this then you're using B05. Check under your About Phone and find the build number.
What variant Axon 7 are you using? If it's 2017U then maybe that's why your VoLTE and WiFi Calling isn't working because this ROM is for 2017G variants.
Whoa. Chill bro. We have been talking about this all today. I was the willing tester to test on my a2017u and it worked perfect I was just letting people know what's not working. Wi-Fi calling is on there but doesn't register with T-Mobile. Volte isn't there because like you said its based on b05. I'm using the b25 modem and it's working fine on the rom. I'm really starting to hate this whole a2017 u g whatever mess
joemossjr said:
Whoa. Chill bro. We have been talking about this all today. I was the willing tester to test on my a2017u and it worked perfect I was just letting people know what's not working. Wi-Fi calling is on there but doesn't register with T-Mobile. Volte isn't there because like you said its based on b05. I'm using the b25 modem and it's working fine on the rom. I'm really starting to hate this whole a2017 u g whatever mess
Click to expand...
Click to collapse
I am chill :laugh: I was just asking because I thought maybe there was a B25 base I wasn't aware of. But now that you clarified you're on the B25 modem your post makes more sense. Didn't mean to come off in a rude way.
Your good my man it's just sometimes on here people can re ask the stupidest questions that everyone has already answered. This is the only phone I've ever had where people ask how to flash a rom 20 times when all they had to do was either A: upgrade there bootstack or B: just follow simple directions lol
joemossjr said:
Whoa. Chill bro. We have been talking about this all today. I was the willing tester to test on my a2017u and it worked perfect I was just letting people know what's not working. Wi-Fi calling is on there but doesn't register with T-Mobile. Volte isn't there because like you said its based on b05. I'm using the b25 modem and it's working fine on the rom. I'm really starting to hate this whole a2017 u g whatever mess
Click to expand...
Click to collapse
What good news, surely it is something apn or permits.
Or call apk.
Still have not received the OTA Nov update, went to Dev Images site and I do not see build# ending in A4, see screenshot. Can I manually flash another version, A1/B1...etc?
Anyone else on this Build#?
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 5 using Tapatalk
Hang in there. All in the same boat..
Google posted an update. Verizon service phones will now get it the week of 11/16.
Oh didn't know.... Thanks all that replied.
Sent from my Pixel 5 using Tapatalk
bigmike35 said:
Google posted an update. Verizon service phones will now get it the week of 11/16.
Click to expand...
Click to collapse
It makes me wonder if the folks that moved to Verizon after they received the November update will get another update.
cougar11 said:
Still have not received the OTA Nov update, went to Dev Images site and I do not see build# ending in A4, see screenshot. Can I manually flash another version, A1/B1...etc?
Anyone else on this Build#?
Thank you
Click to expand...
Click to collapse
Bobby, been here since oh droid. Haven't rooted since then. Now 77 you. Do you think Verizon has Google by the balls again, or is this just a 5 g thing.
GolfOX said:
Bobby, been here since oh droid. Haven't rooted since then. Now 77 you. Do you think Verizon has Google by the balls again, or is this just a 5 g thing.
Click to expand...
Click to collapse
Not sure if it's a 5G thing or not since I have 5g with the new firmware that I received before I came over to Verizon.
Please use the search, this is already the third thread related to November Update not coming
saturday_night said:
Please use the search, this is already the third thread related to November Update not coming
Click to expand...
Click to collapse
From what I've seen, I'm not sure anyone uses search. ?
Tel864 said:
From what I've seen, I'm not sure anyone uses search.
Click to expand...
Click to collapse
It's now listed on the Verizon site but nothing OTA or image available yet on Google.
bobby janow said:
It's now listed on the Verizon site but nothing OTA or image available yet on Google.
Click to expand...
Click to collapse
As posted earlier in this thread according to Google it should be today.
Tel864 said:
As posted earlier in this thread according to Google it should be today.
Click to expand...
Click to collapse
Yes, I know it should be according to all the reports from last week. Today I looked at the Verizon update site and it was finally posted that it's available as of today and to sync your device or wait for it. Would have been nice to just post the OTA file or system image but I guess they can't do that. So hopefully Google will post it sometime today. That's basically what I was saying. I'm curious if you get the update since you just switched to Verizon after the Nov update.
bobby janow said:
Yes, I know it should be according to all the reports from last week. Today I looked at the Verizon update site and it was finally posted that it's available as of today and to sync your device or wait for it. Would have been nice to just post the OTA file or system image but I guess they can't do that. So hopefully Google will post it sometime today. That's basically what I was saying. I'm curious if you get the update since you just switched to Verizon after the Nov update.
Click to expand...
Click to collapse
No, I still have the same November update I had. Over on Reddit some folks are already getting it. I compared my build number to theirs and we have different build numbers. Since I'm getting 5g I'm not sure what I'll miss if anything if I have to wait until December for a Verizon build. I won't know if it would activate 5g uw but I wouldn't know anyway since I don't have a 5g chip.
bobby janow said:
Yes, I know it should be according to all the reports from last week. Today I looked at the Verizon update site and it was finally posted that it's available as of today and to sync your device or wait for it. Would have been nice to just post the OTA file or system image but I guess they can't do that. So hopefully Google will post it sometime today. That's basically what I was saying. I'm curious if you get the update since you just switched to Verizon after the Nov update.
Click to expand...
Click to collapse
Just finished installing build # RD1B201105.010. Pulled OTA.
GolfOX said:
Just finished installing build # RD1B201105.010. Pulled OTA.
Click to expand...
Click to collapse
OK thanks. That's the same build as the guy on Reddit. I have build RD1A.201105.003.C1
LOL, I may be stuck between builds until December. If everything is working, I guess I can't complain though. What's the saying? If it ain't broke, don't fix it. ?
---------- Post added at 09:15 PM ---------- Previous post was at 09:11 PM ----------
GolfOX said:
Just finished installing build # RD1B201105.010. Pulled OTA.
Click to expand...
Click to collapse
Is yours a factory unlocked phone?
Tel864 said:
OK thanks. That's the same build as the guy on Reddit. I have build RD1A.201105.003.C1
LOL, I may be stuck between builds until December. If everything is working, I guess I can't complain though. What's the saying? If it ain't broke, don't fix it. ?
---------- Post added at 09:15 PM ---------- Previous post was at 09:11 PM ----------
Is yours a factory unlocked phone?
Click to expand...
Click to collapse
No. Purchased through Verizon trade in offer.
GolfOX said:
No. Purchased through Verizon trade in offer.
Click to expand...
Click to collapse
On further research it appears that doesn't matter. I think the same version goes out to all phones.
I got my update today and have Verizon 5G Nationwide now
For preferred Network Type (under Mobile Network), do we need to leave Global or LTE/CDMA?
bigmike35 said:
For preferred Network Type (under Mobile Network), do we need to leave Global or LTE/CDMA?
Click to expand...
Click to collapse
Global