Hello everyone
I am Japanese.
"Enable OEM lock release" on P10 lite is grayed out (not selectable) and can not be changed.
Are you familiar with causes and measures?
am-kazu said:
Hello everyone
I am Japanese.
"Enable OEM lock release" on P10 lite is grayed out (not selectable) and can not be changed.
Are you familiar with causes and measures?
Click to expand...
Click to collapse
Hi,
When you reboot your phone, there should be an unlocked bootloader screen (white and yellow text).
If not, start into Fastboot (power off phone, power it on with holding volume down). What does the bootloader status say?
You can also test it with the fastboot command "fastboot oem get-bootinfo".
The oem unlock slider is normally greyed out, when the bootloader is unlocked.
If you have still FRP locked, you can try "fastboot oem relock BOOTLOADERCODE". If this doesn't work, you have to make a factory reset.
Thank you for your reply!
When "fastboot oem relock BOOTLOADERCODE" was executed, it was solved satisfactorily!
Thank you very much!
Related
Hi sorry for My english but i had a problema wiht my Nexus 6 dont responde The touchscreen and i need to send Amazon but the bootloader is unlock i need Lock the bootloader. How as i cold???
JorG502 said:
Hi sorry for My english but i had a problema wiht my Nexus 6 dont responde The touchscreen and i need to send Amazon but the bootloader is unlock i need Lock the bootloader. How as i cold???
Click to expand...
Click to collapse
There is literally nothing about locking your bootloader that requires touchscreen. booting to the bootloader and all operations inside it require only the power and volume keys, as well as your computer, so just lock it as normal.
scryan said:
There is literally nothing about locking your bootloader that requires touchscreen. booting to the bootloader and all operations inside it require only the power and volume keys, as well as your computer, so just lock it as normal.
Click to expand...
Click to collapse
Excuseme how i cant do it?? So hard for me that.
with the phone at it's bootloader screen use fastboot on pc
Code:
fastboot oem lock
show this "FAILED <remote failed>"
<bootloader> Check "Allow OEM Unlock" in Developer Opticon Before
<bootloader> locking.
<bootloader> this allows a recovery method if further flashing is needed
<bootloader> later.
FAILED <remote failure>
finished. total time: 0.016s
Click to expand...
Click to collapse
are you sure your bootloader is unlocked? What does it say your bootloader status is?s
On my phone "Allow OEM Unlock" stayed on after unlocking the bootloader. If you went and manually shut this off then you might have screwed yourself. Surprised it checks allow unlock to relock though...
If you have an On The Go (otg) cable you could probably hook a mouse up to your phone and use that instead of the touch screen.
scryan said:
are you sure your bootloader is unlocked? What does it say your bootloader status is?s
On my phone "Allow OEM Unlock" stayed on after unlocking the bootloader. If you went and manually shut this off then you might have screwed yourself. Surprised it checks allow unlock to relock though...
If you have an On The Go (otg) cable you could probably hook a mouse up to your phone and use that instead of the touch screen.
Click to expand...
Click to collapse
THANKS MY FRIEND!!! with the otg i check the usb debbugin and the oem unlock in the configuration of the phone, and next in the nexus root toolkit oem lock and LOCK BOOTLOADER!!!!!
THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!
Hi all,
I got problem installing TWRP recovery on P10 buil number VTR-L29C432B171.
First of all i unlocked bootloader with Minimal ADB an Fastboot. Now bootloader shows "Phone Unlocked" and "FRP lock".
When i try fastboot flash recovery... it shows FAILED (remote: command not allowed).
Any suggestions?
you have to activate OEM unlock in settings/developers options
virusdunil said:
you have to activate OEM unlock in settings/developers options
Click to expand...
Click to collapse
This setting is inactive (grayed out) after unlocking.
Finally problem solved.
There was somethig wrong with adb interface driver. After unlocking bootloader i have to reset developer settings to defaults to get usb debbuging work again. After this OEM unlock setting resets to, but because it stays inactive its imposible to turn it on. So i relocked bootloader and used Huawei Multitool drivers to unlock again and install TWRP.
I was trying to install Camera2 on it. Unlocked it with developer options ->Unlock OEM
After try some things I reset factory the cellphone and decide to forget camera2 things...
So I went to developer options and LOCKED OEM.
After that I reboot in fastboot mode and did fastboot oem lock
Now the cellphone is locked in a bootloop saying that my deveice loaded a differente operational system and a screen to visit miui.com/unlock.
The unlock aplication doesn't work. Says that I can't unlock the device.
So that means I lost my crazy brand new phone? THere's any solution? The Test Point solution will work? Is that the only solution???
Thiank you for any response.
foxdanger said:
I was trying to install Camera2 on it. Unlocked it with developer options ->Unlock OEM
After try some things I reset factory the cellphone and decide to forget camera2 things...
So I went to developer options and LOCKED OEM.
After that I reboot in fastboot mode and did fastboot oem lock
Now the cellphone is locked in a bootloop saying that my deveice loaded a differente operational system and a screen to visit miui.com/unlock.
The unlock aplication doesn't work. Says that I can't unlock the device.
So that means I lost my crazy brand new phone? THere's any solution? The Test Point solution will work? Is that the only solution???
Thiank you for any response.
Click to expand...
Click to collapse
"So I went to developer option and LOCKED OEM" can you be a little more clear. Because unlocking the bootloader locks the OEM unlock option in the developer settings.
Possible cause of your bootloop is the change in your build.prop file.
I did a similar mistake as well. My phone was stuck in a bootloop. My mistake was that I installed Magisk and forgot to uninstall it through the Magisk manager before locking the bootloader and so the system were not in their stock state.
What I did was, I just booted my phone into fastboot.
Unlocked the bootloader again by using "fastboot OEM unlock". Went into fastboot again. Checked the current active slot by "fastboot getvar current-slot" and flashed the stock boot image from the stock pie rom found on Mi website.
Njaiker said:
"So I went to developer option and LOCKED OEM" can you be a little more clear. Because unlocking the bootloader locks the OEM unlock option in the developer settings.
Possible cause of your bootloop is the change in your build.prop file.
I did a similar mistake as well. My phone was stuck in a bootloop. My mistake was that I installed Magisk and forgot to uninstall it through the Magisk manager before locking the bootloader and so the system were not in their stock state.
What I did was, I just booted my phone into fastboot.
Unlocked the bootloader again by using "fastboot OEM unlock". Went into fastboot again. Checked the current active slot by "fastboot getvar current-slot" and flashed the stock boot image from the stock pie rom found on Mi website.
Click to expand...
Click to collapse
What I did was with the phone working I entered on configuration, developer, and turned of the oem lock option.
Than I reboot in fastboot and did fastboot oem lock.
This made the cellphone unbootable. Bootloop saying that I'm trying to start a different operational system.
And I can't make fastboot unlock because I turned off the option in the system, so I can't send fastboot commands like oem edl, unlock, unlock-critical and etc...
I can't do nothing :/
I don't know how the option was working, but was... I know it should be locked, but this time wasn't. Was after I factory reset the cellphone
Your fault that you locked bootloader on a modified system. Do a research next time
Hi, so my Xiaomi MI A2 is kinda not working and I think that wiping cache partition might help but I can't access the recovery so I wanted to install TWRP. The thing is I have the boatloader locked, I have the USB depuration activated but not the OEM, so how can I unlock boatload or unlock OEM via fastboot?
Thanks
_08_ said:
Hi, so my Xiaomi MI A2 is kinda not working and I think that wiping cache partition might help but I can't access the recovery so I wanted to install TWRP. The thing is I have the boatloader locked, I have the USB depuration activated but not the OEM, so how can I unlock boatload or unlock OEM via fastboot?
Thanks
Click to expand...
Click to collapse
run "fastboot oem unlock" and "fastboot oem unlock_critical" see if its execute without error , then run " fastboot oem device-info" , let us know what the result.
shihabrumel said:
run "fastboot oem unlock" and "fastboot oem unlock_critical" see if its execute without error , then run " fastboot oem device-info" , let us know what the result.
Click to expand...
Click to collapse
It won't let me. It says:
my command: fastboot oem unlock System: FAILED (remote "flashing unlock is not allowed")
Fastboot: error: command failed.
Same with the critical. I also had an error trying another command, it said, not allowed in lock mode.
Actually, I'm trying other commands and it's the same error with all comands.
My Mi A2 was not booting
My mi a2 last updated to 19/04/05 pie version, then i install the Google camera using below steps..
1. Turn on debugging mode/oem & turn off the phone
2. Then power button+vol dwn Fastboot mode & connect to pc (Pc already have the adb)
3. In pc>adb>folder>Cmd> type "fastboot oem unlock"
4. Then factory reset the phone and reboot again to fastboot mode
5. Then boot the patched image for phone
6. Then install the magisk and gcam work perfectly.
Simply i used these methods
the***********.com/enable-camera2-api-xiaomi-mi-a2-lite-guide/
But then I tried to relock the bootloader, using below commands on cmd
1. "adb reboot-bootloader"
2."fastboot oem lock"
I tried these 2 commands 4 or 5 times
But phone is not power on with locked bootloader. Then I unlock again oem and try again,, But not working,
Then i unlock bootloader again and try these commands to lock it again,
1. "adb reboot-bootloader"
2."fastboot flashing lock"
3. "fastboot oem lock"
Unfortunately it is not work, also i can't give command "fastboot oem unlock", also i can't turn on my phone, Please help me... I want to restore my phone to working mode... Please help me, Quick, urgent :crying::crying::crying::crying:
please help me to unlock the bootloader again,
My RM3 was already bootloader unlocked,
at developer option, the Oem Unlock switch was grayed can switch on or off,
when check on fastboot, Device State - Locked
Your bootloader is still unlocked. It just means everytime you wana flash something through ADB you have to send first the following code:
Code:
fastboot oem nubia_unlock NUBIA_NX629J
.