Nook HD+ doesn`t boot (( - Nook HD, HD+ Q&A, Help & Troubleshooting

Hi everyone!
I`ve been using CM13 for a year or so. Everything was fine. Today it suddenly shut down and started to reboot, but never finished booting. Nook logo - cyanogen bootlaoder logo - starting apps and again bootloader logo. I`ve tried hard reset - didn`t help, then I entered twrp menu and wiped cache and dalvik cache - no result. I tried to enter recovery once again to reflash the rom, but it didn`t enter. It`s not booting nor entering twrp now, not from emmc, nor from sd card.
What should I do now?

Related

[Q] Phone stuck on boot animation

HI, im sort of a noob at this but i have been using the Custonexus rom for a cuple of days now and it have been running very good But yesterday when i tried to unlock the phone, the lockscreen didn't show up, the backlit buttons turned on as usual.
I turned off the phone, and did a factory reset. The phone booted up as normal with no problems. When i was up and running again, i booted into recovery to flash back to the stock rom from my backup just to be sure it didn't happened again. I did a factory reset and navigated to the backups but the backup was gone I rebooted the phone but it got stuck on the CN boot screen. What should i do? i have tried many times to reboot it but it always get stuck on the boot animation.
Install original lg kdz and redo everything.
You have to install the Stock (original) Firmware. Here is a HowTo: http://forum.xda-developers.com/showthread.php?t=2069723

[Q] Blackscreen after recovery

Today I installed CustoNexus for my P880 and everything worked fine.
But when I tried to restart my device, I accidently tapped on recovery instead of restart.
Now there is a blackscreen after the initial LG logo after I boot the device,
I don't have a backup, wanted to make one after installed all my apps.
Is there a possibility to boot CustoNexus instead of the recovery mode without reflashing everything?

Unable to access Recovery, Unable to boot.

So I was using my One as usual, and I opened up the facebook app. The phone's screen went black a second later, and started to reboot. It rebooted, and stayed on for about a minute before rebooting again, and again. I then tried to boot into recovery mode, but I was only able to make it to the TWRP Logo before it enters the reboots again. I then tried to switch the recovery to CWM, and make a backup. It finished about half of the backup before it rebooted again. But this time, the boot did not complete. After attempting to backup with CWM, my phone entered a bootloop. I tried booting into TWRP again, and again, but no luck. I am was running ViperOne 6.2.1 with Elemental X 14.12, HBOOT 1.56, and S-ON. Any ideas on how to fix this problem? I just went through the process of wiping, and rebuilding my phone less than a month ago, and I don't wanna do it again. So I'd prefer not to wipe the internal storage.

[Q]New Rom , Booted to the Lockscreen, and Bootloop

So Long Story short, Last week my M7 ran out of battery and died.And my phone stuck on the HTC logo, found out the OS was corrupted and somehow the phone wont boot to the OS, so it was soft bricked right?
So i decided to root and install Custom Rom , i already did this :
- Unlocked Bootloader from HTCdev
- Installed Twrp 2.6.3.3 from fastboot
- go to twrp and do a factory wipe , data wipe, reboot recovery
- flash Android revolution rom from OTG , and the aroma installer went smooth, i acidentaly didn't press wipe on the aroma installer, so i was pressing next until it install
- it installed with no problem message,so i reboot
- it did boot to android and the HTC setup screen welcomes me and the phone seems working allright
- but then there's a random reboot , so i decided to reflash the Rom
- this time i press the Wipe on aroma installer
- the installation went smooth , and reboot the system
and now the bootloop started
- So after the HTC one boot screen (with the beats logo on its bottom) , the phone goes into a screen that said "Android Is Upgrading : Optimizing apps 1 of 100something" (well,there's no message like this on the first flash)
- and after it finish optimizing, it reboot and did the same thing twice
- So Yeah, after that my phone booted to the lockscreen, so i swipe up. and the phone Freeze on HTC logo screen
- i can change the volume on that screen, and also took screenshot , but after a minute the phone reboot it self and goes to the same screen afterwards.
after that, i flashed a fresh recovery, and did wipe cache,data,dalvik on twrp, and reflash it again. Still the same problem, i get the "Android Is Upgrading" Message, then boot to the lockscreen, unlock the lockscreen, and there's a white screen with HTC logo
i already tried flashed another rom (artmod) , and checked the MD5 , and also tried another version of twrp which is 2.7.1.1 and still the same. Yeah i did a dalvik/cache wipe after and before flashing
My m7 is S-ON , and i will provide the Hboot details after i charged the phone (yeah it keep boot looping until the battery dead)
what should i do?
Thanks

Nook HD (hummingbird) stuck in boot loop after botched ROM install

Several times, I tried (and failed) at installing CM on my Nook HD. It went through all of the motions of installing the ROM (no errors, nothing), but when I rebooted, it went straight back to stock with "Hi, welcome to your NOOK."
I thought maybe my version of CWM was too old. I finally found a newer version (6.0.4.9, I think). I flashed TWRP first and then tried to flash CM. This time it crashed in the middle of the installation! Now, it won't boot at all. It just shows the Nook logo, then goes to the Cyanoboot screen, then goes black, then back to Cyanoboot, and so on. It won't boot from the SD card, either. I tried holding N and power to get into TWRP, which was allegedly installed, but that doesn't work, either.
Every web page that I could find discussing the issue of bootloops says, "First, boot into recovery..."
So, what do I do if I can't boot into recovery? Or is there a way I haven't tried yet?
Okay, I was able to restore. I inserted a bootable SD card and held down the N key and the power button. It takes a few times to get it right. So, now I'm back to stock.

Categories

Resources