Related
Hello, I buy a G2 and I have been reading a lot of opinions here on XDA but I can't decide at all.
I want something protective, and also lightly
I saw Nillkin frosted shield here
But I think it is not very protective, or I am wrong?
I also see Spigen Slim Armor here, it seems to be protective but is heavy, is't it? How much does it weight?
Or maybe a tempered glass + Nillkin frosted shield?
Is there anything between nillkin and Spigen?? (I don't like silicone case)
Is Diztronic Matte + an screen protector the best for me?
As you see I read, but there are a lot of opinions in a lot of pages and it is difficult to make up my mind.
Thanks for helping and sorry for my english, I am from Argentina
Daniel
I got this Speck case
http://www.amazon.com/dp/B00IEYHJU8/ref=cm_sw_r_udp_awd_7PzJub1VZ7N4Q
It looks like a two piece thing but is actually a fused one-piece case and quite slim. I have a used G2 in white and it has all sorts of dings and scratches on the phone, this case covers them all up perfectly. It looks and feels amazing. This color is a bit "pretty" but my four year old daughter loves it, so that works for me. I imagine if you have the black phone the black case would look better.
I also ordered a leather case from Tetded but that ships from hong Kong so it will be a while before I can evaluate.
dwielunski said:
I got this Speck case
http://www.amazon.com/dp/B00IEYHJU8/ref=cm_sw_r_udp_awd_7PzJub1VZ7N4Q
It looks like a two piece thing but is actually a fused one-piece case and quite slim. I have a used G2 in white and it has all sorts of dings and scratches on the phone, this case covers them all up perfectly. It looks and feels amazing. This color is a bit "pretty" but my four year old daughter loves it, so that works for me. I imagine if you have the black phone the black case would look better.
I also ordered a leather case from Tetded but that ships from hong Kong so it will be a while before I can evaluate.
Click to expand...
Click to collapse
How does the speck case protect against bumps and drops? As good as the spigen?
I'm using a Diztronic case and this tempered screen protector: http://www.amazon.com/gp/product/B00KVIGG54/
They work well together and I have no complaints about the protection. I'm pretty hard on my electronics and have dropped it to concrete quite a few times with no damage. I was even able to transfer the screen protector to a new phone when I had to get a warranty replacement for a defective camera sensor.
I used to have a two piece otter box style case because I was very paranoid about damaging the phone when I first got it. I got sick of struggling to get in in and out of my pocket since the phone is so big.
Cruzerlite Bugdroid!
http://www.amazon.com/dp/B00FEITFTA/ref=twister_B00FEITAUE?_encoding=UTF8&psc=1
i doubt this case would protect your phone from a waste high drop
Sent in my phone because the charging port stopped working, and I'd like to buy a new case for my m8.
I am looking for something that looks decent and adds protection, with support for a tempered glass screen protectors.
I had a spigen case before this for a few months and the back is already scratched and looks very unappealing now.
Does anybody have recommendations?
I've always been a fan of UAG cases aka urban armor gear http://www.urbanarmorgear.com/.
Every so often they have specials going on as well.
I've been very happy with my Trident Aegis case. $20 on Amazon and offers excellent protection. I've dropped my phone several times and the case has held up well. I've had it nearly a year now with no issues.
Excessiveidling said:
I've always been a fan of UAG cases aka urban armor gear http://www.urbanarmorgear.com/.
Every so often they have specials going on as well.
Click to expand...
Click to collapse
This, I love my UAG case.
I have a ringke slim case black matte one from amazon... Been using it for a few months and works amazing! Catches mad oil though but one wipe and its clean
Otterbox symmetry
Check out the Amazon reviews.
I bought and reviewed 3 cases here in my post. I've since then ditched the dilex as it seems a bit bulky and have switched over to a black supcase unicorn beetle with a red body since i was replacing the usb/3.5mm board on my phone. http://forum.xda-developers.com/showthread.php?t=2728080 I hope that might be some help to you.
spigen hybrid. transparent, great materials, very strong
Yup, i think UAG has one of the nicest looking tough case out there.
So I ordered one of those knox armor cases for $14 off Amazon. They're similar looking to the Otterbox and offer similar protection. Only thing is they don't have a built in protector but that's not a big deal because I have tempered glass on mine.
Only think I really don't like is just like the Otterbox Defender, the rubber near the home key tends to work a little loose after riding around in my pocket.
The rubber around it seems a bit more dense so hopefully it last longer than the Defenders. After just a couple months my Defenders always become looser due to the rubber wearing.
It's not the best case but for $14 bucks I'll take it over a Defender though. It provides more protection than the Supcase too. Only other durable case I can think of that is more durable than this is my Poetic Revolution which I love but it's huge and doesn't work with wireless charging like this one does
http://www.amazon.com/gp/product/B011TFKCBQ/?tag=uc037e-20
Blues fan said:
So I ordered one of those knox armor cases for $14 off Amazon. They're similar looking to the Otterbox and offer similar protection. Only thing is they don't have a built in protector but that's not a big deal because I have tempered glass on mine.
Only think I really don't like is just like the Otterbox Defender, the rubber near the home key tends to work a little loose after riding around in my pocket.
The rubber around it seems a bit more dense so hopefully it last longer than the Defenders. After just a couple months my Defenders always become looser due to the rubber wearing.
It's not the best case but for $14 bucks I'll take it over a Defender though. It provides more protection than the Supcase too. Only other durable case I can think of that is more durable than this is my Poetic Revolution which I love but it's huge and doesn't work with wireless charging like this one does
http://www.amazon.com/gp/product/B011TFKCBQ/?tag=uc037e-20
Click to expand...
Click to collapse
This is probably the best case in amazon I've had it since I've had my phone along with the built in screen protector I use tempered glass. I do construction and I wear my 800$ phone on my tool belt with confidence. http://www.amazon.com/gp/aw/d/B013D...+belt+clip&dpPl=1&dpID=51PBx5XllCL&ref=plSrch
dutchmaster18 said:
This is probably the best case in amazon I've had it since I've had my phone along with the built in screen protector I use tempered glass. I do construction and I wear my 800$ phone on my tool belt with confidence. http://www.amazon.com/gp/aw/d/B013D...+belt+clip&dpPl=1&dpID=51PBx5XllCL&ref=plSrch
Click to expand...
Click to collapse
I got a Supcase. I like the built in screen protector on it but it is a it thin for my liking. I think the best case for being really rugged is the Poetic Revolution but it is kind of over kill but a great case. Again for max protection Supcase is like commuter case to me. The Ulak case is thick and feels more like a Defender. If Ulak case wears like the Otterbox I'll probably rip the temperd glass off and go back to Supcase or the P
Blues fan said:
I got a Supcase. I like the built in screen protector on it but it is a it thin for my liking. I think the best case for being really rugged is the Poetic Revolution but it is kind of over kill but a great case. Again for max protection Supcase is like commuter case to me. The Ulak case is thick and feels more like a Defender. If Ulak case wears like the Otterbox I'll probably rip the temperd glass off and go back to Supcase or the P
Click to expand...
Click to collapse
To each his own but I'll go to bat for the unicorn beetle. I v dropped it plenty of times and not even the tempered glass has broken yet..... knock on wood. The buttons work great and it has a belt clip. Can't beat that in my book
I've got the ulak, and I really like it. I was going to get the supcase, but I REALLY don't like built in screen protectors.
Ryano89 said:
I've got the ulak, and I really like it. I was going to get the supcase, but I REALLY don't like built in screen protectors.
Click to expand...
Click to collapse
I like the built in one on the supcase. It isn't like Otterbox. It fits flush so dirt doesn't get under it. However the Supcase is stiff and too thin for my liking for drop protection. The Ulak seems good. Even if it only last 6 months it was only 14 bucks. My otterBox after 3 months was wearing a lot so I bought other cases. Waste of 50 bucks. My next Note phone I'll order some Amazon cases a few days before I buy the phone so I'm not suckered into buying otterboxes.
I have and use the supcase daily. I love the fit and finish you can definitely tell it's a well made piece. I did also grab one of the Knox armor cases too for around 3 dollars with a coupon code from amazon. Side by side it's easy to tell the supcase built much better. As far as drop protection goes between the two I have no idea, but I have dropped my note a couple times so far. I have yet to actually put the ulak case on, never found a reason to take the supcase off
Sent from my LG-VS450PP using Tapatalk
The Supcase the phone feels kind of thin to grip. Maybe it's because I'm so used to using Otterbox Defender and Poetic Revolution cases. I always thought the Note 5 was a bit thin to grip.
Another good case to check out is the Artech 21. I like the Supcase but it just seems a bit too thin especially with all the glass on this phone. That is why I went with the Ulak. So far after a week it's still holding up well compared to the Defender I have.
Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk
mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk
I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.
The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk
I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile
Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.
AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?
felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.
I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.
I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Here's the Symmetry with the Bodyguardz HD curved.
ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.
Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.
Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.
Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.
I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.
Greetings, mates.
I was a big fan of Speck products with all my phones since iPhone 3GS.
Week ago, bought Z2 Force and was glad to discover that Speck is producing the case for it. It is some kind of a "line refresh" and now called "Presidio Grip". The main difference over well-known CandyShell, i thought, was matte finish and rubber pattern.
But i was wrong. The main difference is awful quality of these new cases. I've read dozens of feedbacks at Amazon on this "Presidio" lineup and all of them showing extreme low quality and materials used in them.
Typical use time now is 2-3 weeks, after that rubber begins to peel off, hard outer shell begins to crack above the volume buttons etc.
I'm attaching only some of feedback photos here, all made not later than a month after the purchase. I was shocked a little, realising that in 2018 Speck is trying to sell case for $40+ with such a low quality... I can buy same "quality" garbage for less than a 2$ at Ali, really. That's definitely not what i'm expecting to obtain for such amount.
Now you really need a case to protect a $40 case, lol.
So, my question is are there any other hybrid cases for our Z2 that is not so bulky as Otterbox and is a good compromise between thickness and protection, like old Speck?
I use Spigen on my Moto Z2 Force , Google Pixel XL, iPhone 7 plus and love the fit and finish...
I actually bought the presidio grip for the Moto z2 force. It's junk and nothing like the previous ones I've had.
Have you looked at the under armour case? It has the grip like the speck. The Incipio octane does too on the sides.
blake .l said:
I use Spigen on my Moto Z2 Force , Google Pixel XL, iPhone 7 plus and love the fit and finish...
Click to expand...
Click to collapse
Spigen rugged? It is not dual-layer design, so not a variant for me. Besides, it is typical cheapest possible $1 one layer TPU case with the only difference - quality of molding.
Spigen tough is like Otterbox, too bulky and outer shell scratches very easily, showing the white plastic beneath thin paint layer.
20degrees said:
The Incipio octane does too on the sides.
Click to expand...
Click to collapse
Incipio octane is a killer for our soft aluminium back. I had same type case on my old 1st gen Atrix. When dust and sand particles goes through camera hole, whole case begin to act like a sandpaper - soft TPU sides will move just a little every time you take a phone or move it to a pocket while hard polycarbonate back will scratch the surface with that dust particles.
20degrees said:
Have you looked at the under armour case? It has the grip like the speck.
Click to expand...
Click to collapse
This is a 100% hit the bull's-eye, thank's mate, exactly what i've searched for. Dunno why i never heard such brand before. :good:
The Under Armour cases are actually made by Incipio. My biggest issue with them is the thickness. Since the Z2F is already so rugged, I'm pretty comfortable with just a slim tpu case and tempered glass. The Tech21 Evo Check can be found online for under $10 now., so I'll probably pick one of those up.
I have this case.
Moto Z2 PLAY / Z2 FORCE Case, COVRWARE [IRON TANK] Built-in [Screen Protector] Heavy Duty Full-Body Holster Armor [Brushed Metal Texture] Case [Belt Clip][Kickstand], Black https://www.amazon.com/dp/B077RMCWT5/ref=cm_sw_r_cp_apa_OTlTAb424WGZ8
It is nice if you are looking for a thin case and a holster. Slightly harder to take off for using mods. (I always pop out the plastic screen protector)
I also have this case
Spigen Rugged Armor Moto Z2 Force Case with Resilient Shock Absorption and Carbon Fiber Design for Moto Z2 Force (2017) - Black https://www.amazon.com/dp/B074BCC6K7/ref=cm_sw_r_cp_apa_hVlTAb0RY15T8
It is a simple slide in the pocket case that is easy to remove to use the mods.
Both are great cases and have held up without any problems.
Is anyone able to determine the model/manufacturer of the case on photo? Found it on glass feedback thread at amazon. Looks interesting.