Database Develop

how to update my rooted s6 g920t to 6.0.1?

hello all
i hv a galaxy s6 g920t which is currently running on 5.1.1 and is rooted because of which i cant get OTA update.plz how to update it using odin to latest 6.0.

Taha92 said:
hello all
i hv a galaxy s6 g920t which is currently running on 5.1.1 and is rooted because of which i cant get OTA update.plz how to update it using odin to latest 6.0.
Click to expand...
Click to collapse
Download 6.0.1 latest firmware, archive it, get .tar file, open odin, choose PDA, choose firmware 6.0.1, put your device into download mode, connect your device to computer, press Start and get some coffee. Done
Lose all data btw, backup all before doing.

thank you bro..

i have downloaded the file which has .tar format at the end but when i want to select the file in odin it doesnt show up there.

adidas123 said:
Download 6.0.1 latest firmware, archive it, get .tar file, open odin, choose PDA, choose firmware 6.0.1, put your device into download mode, connect your device to computer, press Start and get some coffee. Done
Lose all data btw, backup all before doing.
Click to expand...
Click to collapse
Flashing the .TAR file in ODIN does NOT delete your data, I have owned many upon many various Samsung Devices.. Flashing the .TAR.MD5 updated your device and retains all DATA.. You just have to reflash a custom recovery and inject root again..

Zaphodspeaks said:
Flashing the .TAR file in ODIN does NOT delete your data, I have owned many upon many various Samsung Devices.. Flashing the .TAR.MD5 updated your device and retains all DATA.. You just have to reflash a custom recovery and inject root again..
Click to expand...
Click to collapse
Just in case =))

adidas123 said:
Just in case =))
Click to expand...
Click to collapse
You could go to your local humane society and adopt a service animal "Just in Case"
You can flash a TAR file via odin and your Data will be safe, including internal storage..
Your system partition will be the only thing that will change..
I do this several times a day while trying out versions of my custom ROMs.. No damage will come to your data..

If you don't warn them, they will get in trouble if they flash a wrong rom. And then, where to find data? Good or bad, "Just in case" is a best thing that everyone in this forum always does.

Taha92 said:
i have downloaded the file which has .tar format at the end but when i want to select the file in odin it doesnt show up there.
Click to expand...
Click to collapse
Bro did you manage to update without any problems. I am in the same boat however after a factory reset I don't have root access but I still can't receive updates due to modifications . I'm worried updating might re-lock my device (Carrier Lock).

did it get re-locked?
---------- Post added at 06:18 AM ---------- Previous post was at 06:13 AM ----------
bolt890 said:
Bro did you manage to update without any problems. I am in the same boat however after a factory reset I don't have root access but I still can't receive updates due to modifications . I'm worried updating might re-lock my device (Carrier Lock).
Click to expand...
Click to collapse
any luck? did it get carrier re-locked? any idea?
---------- Post added at 06:53 AM ---------- Previous post was at 06:18 AM ----------
JustZaphod said:
Flashing the .TAR file in ODIN does NOT delete your data, I have owned many upon many various Samsung Devices.. Flashing the .TAR.MD5 updated your device and retains all DATA.. You just have to reflash a custom recovery and inject root again..
Click to expand...
Click to collapse
justzaphod does update remove the permanent carrier unlock I purchased?

Issues flashing roms:(

HI!
I have a BIG issue...... i coud not flash ANY custom rom via TWRP..... only original firmware by Odin,
my phone is on EPG2 now but before in 5.1.1 LP, i did downgraded my device by flashing LP BL and modem via Odin before then flash a LP original firmware. I upgraded via ODIN to EPG2 (now again) and could not flash custom roms in EPG2. i tried via Kies and same too.... i wait to finish the kies procedure to done and when flash TWRP (3020) and intend to flash any rom.......said corrupt file again:crying: I don know what i need to do. Maybe need flash a .pit file? or change the TWRP?
any sugest????? help!

Hey there, I ran into a similar problem and my problem was the reactivation lock under settings, security, I had it turned on. I'm not sure about your case but if you do have it on.....turn it off. Good luck.
Sent from my SM-N915T using XDA-Developers mobile app

wilsonmd said:
HI!
I have a BIG issue...... i coud not flash ANY custom rom via TWRP..... only original firmware by Odin,
my phone is on EPG2 now but before in 5.1.1 LP, i did downgraded my device by flashing LP BL and modem via Odin before then flash a LP original firmware. I upgraded via ODIN to EPG2 (now again) and could not flash custom roms in EPG2. i tried via Kies and same too.... i wait to finish the kies procedure to done and when flash TWRP (3020) and intend to flash any rom.......said corrupt file again:crying: I don know what i need to do. Maybe need flash a .pit file? or change the TWRP?
any sugest????? help!
Click to expand...
Click to collapse
Try to download rom files again and flash latest version of twrp and turn off reactivation lock.

Trex888 said:
Try to download rom files again and flash latest version of twrp and turn off reactivation lock.
Click to expand...
Click to collapse
I did it everithing........activation lock off, twrp last version, and unknow source checked too! I downloaded the same file 4, 5 times....

Nand Erase In ODIN ( *** SOLVED *** )

Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?

Rajeev said:
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Click to expand...
Click to collapse
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..

Rajeev said:
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Click to expand...
Click to collapse
It should be in the options tab.

MrMike2182 said:
It should be in the options tab.
Click to expand...
Click to collapse
Yea i fixed it bro. Thanks bro

How did you get your partitions back?

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
That's what the PIT file does.

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
Download PIT file for ur exact model number from Samsung website and flash it via ODI with Firmware.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.

Amolxp said:
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Click to expand...
Click to collapse
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..

MrMike2182 said:
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
Click to expand...
Click to collapse
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much

Amolxp said:
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Click to expand...
Click to collapse
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.

MrMike2182 said:
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
Click to expand...
Click to collapse
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks

Amolxp said:
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Click to expand...
Click to collapse
You can do that yes and if that doesn't fix your problem then there must be something wrong with the phone itself. For your information though you're asking for help in the Galaxy Note 5 thread but you're on a Galaxy S7 Edge.. I do think a moderator might end up moving this to the correct place.

[SOLVED ] HELP!!! Lost IMEI & Hard bricked Note =8 SM-N950F/DS

HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.

mohiminul said:
HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.
Click to expand...
Click to collapse
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
AwesomeARC said:
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
Click to expand...
Click to collapse
Try this link
https://m.wikihow.com/Recover-a-Bricked-Samsung-Galaxy
Hope it helps

AwesomeARC said:
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
Try this link
https://m.wikihow.com/Recover-a-Bricked-Samsung-Galaxy
Hope it helps
Click to expand...
Click to collapse
Brother I have tried the above method as per your suggestion but no result.

mohiminul said:
Brother I have tried the above method as per your suggestion but no result.
Click to expand...
Click to collapse
Try
https://www.fonepaw.com/bricked/fix-bricked-android-phone.html

You need Combination file to fix it

lost emei
this happened to me. I lost imei and could not make calls. what network were you on. I downloaded software for that network from sammobile and installed via odin, the imei returned and I was able to make calls again. I think what happened in my case was I rooted phone and put a rom on it. in aroma I selected t mobile America so it installed the file for that. I was on o2. my phone was unlocked. it did not recognise my simcard

Flash different modems
Hi
It has happened to me too many times with different phones including note 8
Just flash different modems and bootloaders to find the proper one.
androidfilehost .com/?w=files&flid=221868
*:Remove the space bofore .com
You can use both odin and twrp but if you want to stay stocked try odin mode.
If none of the above files worked for you look for other modems.

Odd that you can connect note 8 to kies3.. and not switch..
Sent from my SM-N950F using Tapatalk

I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.

mohiminul said:
I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.
Click to expand...
Click to collapse
Have you tried this one COMBINATION_FA71_N950FXXU1AQK2
While flashing combination file you need to flash HOME_CSC_OXM with it

mohiminul said:
I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.
Click to expand...
Click to collapse
Jtag

holifo said:
Have you tried this one COMBINATION_FA71_N950FXXU1AQK2
While flashing combination file you need to flash HOME_CSC_OXM with it
Click to expand...
Click to collapse
Flashed COMBINATION_FA71_N950FXXU1AQK2 Factory binary from 2 sources along with HOME_CSC_OXM. No improvement. :crying:

so your phone is soft bricked. Its less of an issue since you have access to:
-recovery
-dl mode
go to updato.com and grab about 3 different stock firmwares.
1-the oldest one compatible with your phone you can find. forget about your region just be sure its an early FW and its for N950F. f or ds dosent matter.
2-again same as above but try one from south America.
3- same as #1 but from france or north west europe region.
before flashing, enter recovery and wipe data and cashes.
after wipe dont let the phone boot, have it go straight to DL mode.
now use latest odin and flash the firmwares above. if one of the flashes fail in odin Check your cables and usb port if any of the firmware flashes get stuck or give errors. Be sure to flash all BL AP CP and CSC files. for csc I think HOME csc has the pit file so you might also want to try repartition/bootloader update option if nothing else works. Since your phone is probably out of warranty by now.( might want to check if you can simply get it fixed before trying anything of the above first)
edit:
i saw you said having used kies 3 to do the emergency recovery. Im not sure how that were possible. do you mean smartswitch? if you have not used it, then go dl it and do the recovery from smartswitch. I dont even think kies support the note 8.

Ask him - https://forum.xda-developers.com/an...x-box-free-t3648947/post73222755#post73222755

mohiminul said:
Flashed COMBINATION_FA71_N950FXXU1AQK2 Factory binary from 2 sources along with HOME_CSC_OXM. No improvement. :crying:
Click to expand...
Click to collapse
And this file is flashed via odin til the end - with green PASS? Strange.
Hi mate, i know your feelings.
Ok, i just can tell about my issue. I was on a QK6 custom rom with a QKG bl/modem and fell back in jail So i had to flash stock but only the AP (QK6 bc QKG was at work :angel and CSC file. It booted up with the data of the custom rom and worked quite good. Except the gallery. So i decided to flash the QK6 bl/modem. The flash with odin crashed at the bootloader part. The phone booted without connections, no imei, no baseband...an exclusiv paperweight.
I tried a lot all a disaster. I searched for imei repair with the intencion to pay a lot of money but nothing. Even imei gurus said it's impossible for now to fix the imei for the note 8 with knox 0x1 by software.
Last thing i thought before i went crying to bed was the incomplet flash of the bootloader. So i downloaded over night the whole QKG package and flashed it in the morning.
AND all was fine again. I think the culprit is the Bootloader you can't downgrade from QKG. In the Iron Rom thread are the same issues after flashing the QK6 Bootloader with the rom over a QKG bootloader - all have lost there imei and baseband. They also fixed it than by flashing QKG BL (and modem).
This was my story and i hope it would help to fetch your problem.

I have same problem with your case, its made me sick 1 day but here is my success solution worked like charms !!
1. Download newest stock firmware via SAMFIRM ( for me i used XXVN code) extract it you will have AP and CSC using on this case
2. Download BL and CP via this link: (remove space before .com) You will have BL and CP
androidfilehost .com/?w=files&flid=244051
3. Open Odin chose BL, CP download from Androidfilehost. AP and CSC form stock firmware
Flash them and your Note will be back !! Reply me if u success !!
Ps: This case will upgrade ur blootloader to BRA2
And i heard that cant be rooted again, however my Note 8 is undead so im gonna sell it away better than bricked
Good luck from VietNam

Nice !!!! Its worked !! after i got check fail device 3, binary 2. I could flash ap,cp,csc but BL so now my Note is back to stock
Cheer

mohiminul said:
HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.
Click to expand...
Click to collapse
Does the imei appear as uknown? or a bunch of zeros?

THORMUNZ said:
Does the imei appear as uknown? or a bunch of zeros?
Click to expand...
Click to collapse
The post you are responding to is 5 months old !
Just saying...
Sent from my Galaxy Note 8 using XDA Labs

THORMUNZ said:
Does the imei appear as uknown? or a bunch of zeros?
Click to expand...
Click to collapse
It used to come as unknown. I figured out a solution. Used https://drive.google.com/file/d/1qI8L3y1GkSlQu_Q03dsZr0DfBkb0ZRcs/view?usp=sharing this combination rom and this eng_boot https://1drv.ms/u/s!Aq07ytE0dzjkhv0iFXiB216r10pAvw
my phone booted to factory repair mode and then just went to IME option and dialed *06#

Plzzz note 9 bricked efs

I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]

Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?

willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
I used a tool to fix baseband the tool reboot my phone into download mode and flash something
i try to boot my phone it get bootloop i try flash stock rom still bootloop
i flashed combination file still bootloop
i think the tool did something to efs partition

Did you complete a backup with TWRP?

willhemmens said:
did you complete a backup with twrp?
Click to expand...
Click to collapse
no i didint flash twrp my device not rooted

devil499 said:
no i didint flash twrp my device not rooted
Click to expand...
Click to collapse
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk

Good luck dude when the mention above most really suck having a bricked note 9

jaylence said:
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
i have done that but didnt worked
plz help me
i didint find pit file for my device
n960f

HtcOnekid said:
Good luck dude when the mention above most really suck having a bricked note 9
Click to expand...
Click to collapse
i found this post https://forum.xda-developers.com/ga...ide-fix-n950f-efs-failed-to-mount-dm-t3831184
i beg you can you plz help understand it
Extract Stock firmware AP file (rename .md5 to .tar)
this i cant understand wich should i rename or what i do
Rename dqmdbg.img to efs.img (or smallest image must be smaller than 8000 KB). Extract Dqmdbg.img.lz4 so it’s just “Dqmdbg.img” and then rename it to efs.img and put that one in a tar. Other option is downloading a file that’s already made this way if your bootloader is binary 4, Saves you trouble of extracting / renaming: http://www.mediafire.com/file/589wuc...f/efs.tar/file (if you download this file just move onto number 3)
Add file new efs.img into tar archive.
Flash tar as AP file in odin + download mode
Reboot download mode
Flash Combination with odin + nand erase option on Edit: suggest you to flash stock rom first and oem unlock, don't need to wait for 7 days if imei is 0000 skip combination step
Device Should boot into Factory binary
Use IME to restore imei using *#06# (or imei 0000 in stock rom) Edit: This step is not required if efs backup is restored successful
Your device should have dm-verify failed in recovery due to drk error
Continue drk bypass for dm verify error below to continue

willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
What? I'm using desktop. Is there a different view on mobile?

Bricked Note 9 due to efs
devil499 said:
I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]
Click to expand...
Click to collapse
I have the same problem with my note 9. Im looking if anyone can provide me with efs file of N960F Binary 3 so i can get it unbricked again.
I found this website but it has efs files for binary 1 and 2 not 3. Will it still work if i use binary 2 efs?
//frpdone.com/efs-mdm-samsung/
Did u find a solution?