Related
Q&A for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A little different brick of my Moto G 2nd gen(XT-1068).plz help
Hi ,
Please dont ignore my mail just bcoz its too long. I have been following this thread from four to five days. Will you please help me ? Just have a look at my problem. I have been rooting my android phones and have good experience of testing , rooting the handsets. Recently I flashed my Moto G ( xt-1068 ) with lolipop because i was not able to wait till motorolla release it.
I tested it for few days , and successfully downgraded back to 4.4.4 kitkat. It was all fine. I love MIUI so I started my work to port MIUI over our favourite Moto G . I even ported it and was not booting. So I edited updter-script and was trying to flash it back on my xt-1068.
Now the mistake that happened was , due to some error in the script , It aborted the installation. When i checked the log from CWM , It has crossed partitioning and it aborted while extracting the directorties. By mistake I restarted the phone and since the partitions were flashed and there was nothing to execute , my phone is stuck. Its not even starting . Its getting recognised as "qhsusb_bulk". Thts why i came over this thread and tried to follow the procedure you have mensioned.
I am also getting the same error like while flaashing with blank-flash : FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) and FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) .
So do i have the same problem that happened with theses guys who tried to downgrade their handsets from Lolipop to kitkat ? If its so , should I also wait for Lolipop release by moto ? or will i have some other problem ? Do you have any solution ? I was really wanted to make MIUI available for our Moto G . I don't feel sad for bricking of m phone but what ifeel sad is I want it back. I can't pass my day without it. i am missing it. Please can you suggest me wht should I do ?
Thanks in advance.
DONT WORK FOR ME :s
I have a moto g 2014 XT1063 and after unlocking the bootloader the phone work well for a minutes. Then i power off the phone and when i try to turn on again the phone is die :S no custom no bootloader dont charge dont vibrate not nothing uu. i try this tutorial but when i run the blankflash he trhrow me a error :/ please help me
Moto G hard brick
Someone please help all of us who have wrongly hard bricked our lovely Moto G 2014 . The blankflash is giving "Error sending packet" error. We all will be really thankful of you. Please help. Although some Devs say that we will have to wait for lolipop, but Moto G 2014 has already 5.0 available. Someone please check this thread and solve the problem.....plz..
link : http://forum.xda-developers.com/moto-g-2014/development/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010
same problem
Hi, i have an moto g xt1068 too and din't power on since yesterday hope to find a solution is hard bricked too.
i bricked mine.problem is the code 43 wich it won t recognize at all the device whatever driver i use.
altho it wont boot black screen i dont know if it charge or not, PC will recognize as device once i press volumedown+power button.
wich on my opinion he works somehow but it isn t recognized bt the windows 7.
i will install a fresh copy of win7 and check again maybe is just a failure from windows.
any other advices feel free to share.
firmwares
do someone has the moto g 2gen firmwares on extention .tar.gz i need them to fix my phone
Help!!
Hi people.
Well, only 2 weeks ago I got my Moto G XT1063 and I unlocked bootloader to install Soak Test of Android 5.0.2 with RetailUSA firmware. (My device's original firmware, was for Claro Colombia).
It worked well, I got it running perfect. Yesterday I saw that official/final version of 5.0.2 was available for my device with RetailUSA firmware, but I needed to do a downgrade to KitKat first, because it wouldn't work if I was in Soak Test yet.
So I made the downgrade, and it was running well, I checked for updates, and there was no updates availables, so I decided to reboot, to see if it may make the update appear. But after turning off my device, and trying to turn it on again, just nothing happened.
Now, my device doesn't want to turn on, neither in fastboot mode. And now, I don't know what to do here. So I would be really thankful for any help provided.
Thanks in advance. Have a nice day.
So here is what happened,
My phone was maybe 14% plugged it in left it charging and went to sleep.
Woke up with the phone alarm and started reading whatsapp messages, at this point the phone was already at 100%.
Maybe 30-40 seconds later, with the cable still plugged in the phone turned off, with no message, it just "died".
Now it wont boot, fastboot, nothing.
Tried some solutions i found on the internet like holding vol down + power button for more than 2 minutes, and nothing.
I really need some help here guys, PLEASE.
The phone was running latest TITAN PRIME ROM 1.1 dev3
Everything will be appreciated, thanks in advance.
partitions whacked out?
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
arvinoids said:
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
Click to expand...
Click to collapse
Same here, also due to 0% battery.
Seems these phones do not shutdown early enough before the battery voltage drops below spec. ****ty engineering.
Please, someone help us for the sake of god.
There are several people with this problem and we don't know how to fix it.
Is there any possibility, any help, anything we could test would be welcome.
Phone Moto G 2014 not turning on after flashing BlissPOP ROM
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Im too facing the same issue.. the device is not turning on.... i jus unplugged from the charger but before putting the device for charging it was 67% battery... after unplugged the device screen jus turned into black i tot,the screen went to sleep but later the device dint turn on..... plzzzzzz guys any1 has any solutions??????????
I followed according to this thread http://forum.xda-developers.com/moto-g-2014/general/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 but nothing worked....
Gave my Bricked Moto G 2nd Gen to Moto Service Center
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
Please let me know because also I've bricked my device & want to send it to nearest authorized service center.
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
I got my device from service centre n got motherboard replaced with warranty... But got updated to new firmware ss below....
Sent from my XT1068 using XDA Free mobile app
moto g2 shows qhsusb bulk plz somebody help
hello friends.. i don't have Rif JTAG box....to unbrick my moto g2
If anybody have box plz help me...& repaire my mobile bootloader
I will pay for this....plz help help help.......call me on this no.
9465351811
state punjab distt patiala teh nabha
vpo :CHHINTANWALA
exactly same problem.
lijuram said:
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Click to expand...
Click to collapse
i have through exactly same thing. my phone was working exellently on blisspop rom and got bricked once i installed an addon.
now i want to know what u did after tht.
not to mention i dnt have warranty now.
wanna listern to a person going through same ****.
Hello frnds ....my bro have moto g 2nd gen running on lollipop with unlock bootloader rooted and twrp recovery. yesterday i flashed resurrection rom. every thing ok today i reflashed stock lollipop rom by restoring nandroid backup... Today my bro in my absence trying to flash again resurrection rom. my bro is totally noob ...he flash kernel instand of rom which is not compatible with this rom and phone get hard brick .....i has been tried this method but nothing heppened ....plzzz give me solution plzzzzzzzzz
Help me, blink my phone, moto x, after trying to install lollipop, corrupted bootloader and can not restore it!
We Need more details to be able to help you.
like...
What model do you have? XT1052? XT1058? XT1053, etc?
What rom was on your phone? Stock, custom? what andrid version?
What exactly did you do? flash rom xxxx using RSDLite? flash rom xxx using mFastboot? installed xxx.zip via TWRP?
What exact error do you see on your phone? (Can you post a picture)?
KidJoe said:
We Need more details to be able to help you.
like...
What model do you have? XT1052? XT1058? XT1053, etc?
What rom was on your phone? Stock, custom? what andrid version?
What exactly did you do? flash rom xxxx using RSDLite? flash rom xxx using mFastboot? installed xxx.zip via TWRP?
What exact error do you see on your phone? (Can you post a picture)?
Click to expand...
Click to collapse
XT1058, Lollipop used RSDLite..
The truth is that I see nothing as it does not turn with the corrumpido bootloader nothing happens ..
I'm trying to use the blankflash but nothing happens ..
It gives an error in the process ..
I am very aperriado because naum can buy another phone now, I'm broke, I need help ..
Thank right now
---------------------------------------------------------------------------------
I encontreu one aquivo here with various MSM8960 structures, however, I do not know if it is for something ..
J_Eudes said:
XT1058, Lollipop used RSDLite..
The truth is that I see nothing as it does not turn with the corrumpido bootloader nothing happens ..
I'm trying to use the blankflash but nothing happens ..
It gives an error in the process ..
I am very aperriado because naum can buy another phone now, I'm broke, I need help ..
Thank right now
---------------------------------------------------------------------------------
I encontreu one aquivo here with various MSM8960 structures, however, I do not know if it is for something ..
Click to expand...
Click to collapse
How did you get in this state? What did you do?
If trying to use blankflash, you will want to see this thread -> http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057 in particular around posts 442 through 455
KidJoe said:
How did you get in this state? What did you do?
If trying to use blankflash, you will want to see this thread -> http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057 in particular around posts 442 through 455
Click to expand...
Click to collapse
I do not understand English, ssou of Brazil , to read it all would take one year kkk my moto x lights the green led sometimes , that's good ?
You have the lollipop bootloader Archive ?
please save my life
J_Eudes said:
I do not understand English, ssou of Brazil , to read it all would take one year kkk my moto x lights the green led sometimes , that's good ?
Click to expand...
Click to collapse
Grean light means battery is dead and needs to be charged.
Travisdroidx2 said:
Grean light means battery is dead and needs to be charged.
Click to expand...
Click to collapse
What if I reload , it will come to life again ?
J_Eudes said:
What if I reload , it will come to life again ?
Click to expand...
Click to collapse
You need to get some charge in it if you are trying to flash anything. Unless you have a factory cable, a factory USB cable will charge the battery even if your phone is bricked
Travisdroidx2 said:
You need to get some charge in it if you are trying to flash anything. Unless you have a factory cable, a factory USB cable will charge the battery even if your phone is bricked
Click to expand...
Click to collapse
I have already put to load ...
This tool works here?
http://forum.xda-developers.com/showthread.php?t=2136738
J_Eudes said:
I have already put to load ...
Click to expand...
Click to collapse
Good.
Is that Qualcomm HS-USB*** thing still there in Device Manager when you have phone connected to PC?
What exactly did you flash in to brick your phone? Link to it, please
s5610 said:
Good.
Is that Qualcomm HS-USB*** thing still there in Device Manager when you have phone connected to PC?
What exactly did you flash in to brick your phone? Link to it, please
Click to expand...
Click to collapse
I was trying to put the new version of lollipop
****** NEWW ********
I can restore it, but only had to put other files and install new versions of python (2.7) and also the pyserial ...
######THANKS############
Thank you for helping me and for giving me attention! : Boa:: Toca aqui:: Dedos cruzados:: Rir:: Vitória:
KidJoe said:
We Need more details to be able to help you
Click to expand...
Click to collapse
What's happening? Bricks run away from us ) No, I have a hunch they return lately. Motorola isn't that easy quest.
Most annoying thought for me now is what will happen with those who raised their locked boot loaders to high Lollipop versions. Will they get flashable SBF (RSD) firmware, or not...
I could, but I lost a lot of night sleep kkkk other words, has that much to wrap your head get
Sent from my Moto X using XDA Premium 4 mobile app
I'm having a lot of trouble with a device and I'd like to share with you guys and try to come to a solution for it.
I have a XT1068 that got its battery depleted during the flash of a stock rom, with the stock bootloader and everything. I've been looking for information and it really looks like a bootloader brick, or so I've been thinking of it and by that the phone doesn't give not even a sign of life. The only thing that if gives is that plugging it into USB charger the led turns on for two minutes or less. When connected to the computer, device is only recognized after led turns off and being read first as QHSUSB_BULK and Qualcomm right after it.
Looking for tutorials on the Web I've found motoflasher and blankflash,
I've found out that motoflasher does the same as blankflash, but in a more intuitive way, I've found out a solution for XT1032, but I think that it works for XT1068. Problem is I think that it can't be done after the bootloader was already updated for 5.x, I can't find a qboot.exe that is compatible with 5.x bootloader. If someone also got stuck and got rid of it please help me, I'm desperate for a solution of it.
I've also got a XT1038 that works perfectly with 5.1, I'd like to know if there is a way of backing up my bootloader for use in this another device.
Thanks for everything and sorry for my English, I'm Brazilian and Portuguese is my main language.
wrong forum this is moto g 2014 2nd gen XT1063/4/8/9
try link below
http://forum.xda-developers.com/moto-g
I'm sorry, my autocorrect changed the device name. It is indeed a XT1068.
foooxxx369 said:
I'm sorry, my autocorrect changed the device name. It is indeed a XT1068.
Click to expand...
Click to collapse
dont think there is a fix for xt1068 ,
theres a fix for xt1032 I believe if still on kitkat boot loader
sure i seen reports that if this happens to xt1068 theres no fix except service center who replace motherboard - but please check my info is from months ago
I have a similar situation with my XT1063. I can enter on bootloader and recovery and even boot normally to system but I get Forcé Close to EVERITHING so the phone is useless. And when I try to flash another ROM vía recovery or adb or fastboot there are a error por fail. So I am not able to change my recovery, restore a backup , flash new ROM (even the stock one 5.0.2) or anything. I read also all the thing about OP's driver solución (qboot) but my pc recognice my phone by xt1063...
Sent from my Optimus 4X HD using XDA Free mobile app
i'm on the same boat. Hopping on it
the qboot thing is gen 1 on kitkat bootloader - so wont work on gen 2
the cant flash recovery / rom thing is corrupted emmc (either file system or just bad)
both still no further advance -sorry guys........
so ive been busy with this moto g, and to get it to run again, i got it to work when i help the power+Volume-down button for 120 secs with the charger plugged in, I unlocked the bootloader, but i cant get the official rom to work reliably, ive gotten partition table errors, and hab errors..
any help? I would really appreciate it!
Try to flash this stock 5.0.1 - https://dl.dropboxusercontent.com/u/18623290/Moto%20G%202015%20%5BXT1072%5D%20Restore%20to%20Android%205.0.2%20(22.46.28).zip
Wanted_X2 said:
Try to flash this stock 5.0.1 - https://dl.dropboxusercontent.com/u/18623290/Moto%20G%202015%20%5BXT1072%5D%20Restore%20to%20Android%205.0.2%20(22.46.28).zip
Click to expand...
Click to collapse
Thanks for the suggestion, but ive found a xda article http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 for android 6.0 and ****ed up.. so now its hard bricked.. XD
So here is the new post ive made with more info!
http://forum.xda-developers.com/moto-g-lte/help/hard-bricked-moto-g-xt1072-help-dx-t3382987
Atleast i already want to thank you for the reply..
im trying to figure out how this site works.. XD
Hello everyone, well I have a problem that I can not solve, I hope members of this community can give me a light.
After a lot of cost, I was able to install a custom rom on my wife's XT1773, because the rom stock of the device is very bad, but she did not adapt and I decided to go back to the stock rom, but before I finished installing the stock rom my daughter removed the cable from the device and did not call any more, nor load and put to reinstall the rom the SP Flash Tool of the error before even starting to install.
ERROR: S_FT_DA_NO_RESPONSE (4001)
Please, I really need your help, because I do not know what to do.