[Solved] Yesterday I tried to root my phone but after do all the steps that were on the sites, I couldn't turn it on anymore. Everytime I try it makes the bootloader but when it ends, the moto x turns off again. I don't know what happened someone told me that it names hardbrick so, can anyone tell me how to fix it? Or if it's possible.
If you need some information to help me, just ask. [Solved]
If you can get to the bootloader is not bricked.
Look up how to use fastboot to flash the system and boot img.
Go to soltrans' thread and you should be fine
Sent from my victara
fastercon said:
Go to soltrans' thread and you should be fine
Sent from my victara
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x-2014/general/guide-update-xt1095-pure-edition-to-t2937074
Start with step "0".
Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
??
libnijunior said:
Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
Click to expand...
Click to collapse
What model Moto X 2014 do you have and is the bootloader unlocked?
Can you get into bootloader mode? Have you tried pressing and holding volume down + volume up + power and holding for about 4 seconds and then releasing?
libnijunior said:
When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057.
Click to expand...
Click to collapse
AFAIK that only works for the Moto X 2013 b/c of the hardware differences.
JulesJam said:
What model Moto X 2014 do you have and is the bootloader unlocked?
Can you get into bootloader mode? Have you tried pressing and holding volume down + volume up + power and holding for about 4 seconds and then releasing?
AFAIK that only works for the Moto X 2013 b/c of the hardware differences.
Click to expand...
Click to collapse
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
libnijunior said:
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
Click to expand...
Click to collapse
Have you downloaded Motorola Device Manager to your computer? Does it detect your device when you connect it to your computer?
If MDM does not detect your device and you can't get into bootloader mode, I don't have any suggestions for you.
Are you still in warranty? Can you see about getting a warranty replacement?
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
libnijunior said:
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
Click to expand...
Click to collapse
Also - if the problem is all software, I believe the device can be relashed by Motorola. It may be cheaper than getting a new motherboard.
I believe they have these devices JTAG that allow them to reflash the bootloader and partition table to the device. A repair shop may be able to do it for you, too. They need to open up the device to do it.
JulesJam said:
Have you downloaded Motorola Device Manager to your computer? Does it detect your device when you connect it to your computer?
If MDM does not detect your device and you can't get into bootloader mode, I don't have any suggestions for you.
Are you still in warranty? Can you see about getting a warranty replacement?
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
Also - if the problem is all software, I believe the device can be relashed by Motorola. It may be cheaper than getting a new motherboard.
I believe they have these devices JTAG that allow them to reflash the bootloader and partition table to the device. A repair shop may be able to do it for you, too. They need to open up the device to do it.
Click to expand...
Click to collapse
I will try to activate my warranty, but if i can`t i will see with motorola Brazil the cost of the repair, because I don`t know what is the price of the repair.
Thanks for the attention!
libnijunior said:
I will try to activate my warranty, but if i can`t i will see with motorola Brazil the cost of the repair, because I don`t know what is the price of the repair.
Thanks for the attention!
Click to expand...
Click to collapse
Definitely get a repair quote from Motorola if they aren't going to cover it under warranty - a local repair shop may be cheaper.
libnijunior said:
Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
Click to expand...
Click to collapse
Hey, did you actually succeeded in unbricking Moto x 2013? I followed the same link. Hostage released but no boot up. Any idea or is there anything I am missing? Email is [email protected]
I Missed What I have done
Iorbee said:
Hey, did you actually succeeded in unbricking Moto x 2013? I followed the same link. Hostage released but no boot up. Any idea or is there anything I am missing? Email is [email protected]
Click to expand...
Click to collapse
I have done it a long time ago and I don't remember what exactly I have done, but search in comments of the topic, because some answers you can find into comments.
Files needed for the blankflash on Moto X 2014 are not leaked/released yet...
help-me
not I access fastboot mode on my bike x can help or give a light, I'm open bootloader, root, installed the soak test 5.1 but then went back to when he had 4.4 update OTA he went out and not turn over.
I'm looking at this thread anything happens to the device - http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
@libnijunior
@JulesJam
@JulesJam
ogunja said:
not I access fastboot mode on my bike x can help or give a light, I'm open bootloader, root, installed the soak test 5.1 but then went back to when he had 4.4 update OTA he went out and not turn over.
I'm looking at this thread anything happens to the device - http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
@libnijunior
@JulesJam
@JulesJam
Click to expand...
Click to collapse
Unfortunately, we do not have the blankflash files for the Moto X 2014. They have them for the Moto X 2013 so that is why they can fix their devices.
Can you get a warranty replacement from Motorola? That is the best option if you can get one.
Also, ask motorola to release the files for the 8974 processor. These are the files that we need:
MPRG8974.hex
8974_msimage.bin
(may be named MSM8974.bin or MSM8974_bootloader_singleimage.bin)
You can also ask for the files in this thread: https://forums.motorola.com/posts/b6cb5537f5
Are these the files that are needed?
Hi guys, I'm having the same problem with the xt1097.... searching (a lot) this last 3 days I found this website:
bbs.nubia.cn/thread-416486-1-1.html
In this website is a tutorial to get Z7 max back to life, and curiously (I might be wrong) but works with pretty similar specs as motorola, and actually usess the MSM8974. Hence I' uploading this files that you say. I've alrady tried on my phone but it get stucked with the following in the eMMC Software Downloader app:
Device mode = Sahara on port 10000
server event monitor enabled
path for selected COM port = "_HCD7!dev:0"
server event 1 10000 0 0
Timeout waiting for device
device wait found 0 0
files: mega.nz/#F!wddCjQDb!raPwHpa7bTJHh4mRuJ9nMA
So, Hope this can be helpfull and someone say how to use those files.
Those files won't help. We need the ones for this phone. Files from any other phone will not work.
Sent from my XT1095 using Tapatalk
:/ that's sad. For a minute I had a hope. No choice but to wait a miracle.
One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Feel blessed, you don't have to use moto g anymore.
Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..
Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip
There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not
Hello guys, my Owens-Mobile Moto E4 Plus XT1776 Was bricked now, and when I connect to my pc , it only Show it is qcom 9008, seems that I need blankflash to save my phone , so
deos anyone who can find it, please help me , thx .
did you recover the phone?
same here I need help getting my phone back... please I just got this phone :crying::crying::crying:
Jay De Anda said:
same here I need help getting my phone back... please I just got this phone :crying::crying::crying:
Click to expand...
Click to collapse
any solution??
still nothing
I need help with my corrupted moto g7 bootloader. I need someone who has the file mmcblk0.img to help me, because it would be the only way to try to recover my moto g7.JA I tried several options here on the forum, but my case would be a little different, unlocking the bootloader then I tried to root and corrupted everything, I'm a little bad at it and ended up doing nonsense.Now my moto g7 doesn't turn on, there is no charging and nothing appears on the screen, it doesn't connect normal usb so qualcomm 9008, it doesn't run adb, it doesn't recognize rsd .. . Could someone please help me ... The only option I saw would be a mmcblk0 file for the moto g7 to try to boot from memory card, because it was the only way I haven't tried it and unfortunately with my smatphone without working I can't extract it mmcblk0.img. Wait with a good heart to help me?
How did you find the info about needing this file? I've been searching around for several years... (not for the phone or any Motorola phone I am referring to).