Paradox Kernel
HTML:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello everyone...This is my first step towards developement...I created Paradox kernel for learning and after adding many features, its time to release it to community...Paradox kernel is based on latest Lineage 14.1 sources and supports LineageOs 14.1 and all other lineage based Aosp (7.x.x) roms...My moto is to make a stable and balanced kernel having better performance as well as good battery life with usefull features
Once again, Paradox kernel is for NOUGHT ONLY (LINEAGE 14.1 and AOSP 7.X).
Features
* Based on latest lineage 14.1 sources
* Compiled using Linaro 5.4.1 toolchain
* Added cpu governores
-Impulse
-Smartmax
-lionheart
-ondemandplus
-wheatly
* Added i/o schedulors
-Sio
-Tripndroid
-zen
*Wake gestures (DT2W,S2W,Pocket Mode)
* Faux sound 3.4
* Franco Fsync control (enabled by defualt)
* KCAL colour control
* Powersuspend and LCD Notifier
* Power efficient workqueues
* Optimised crypto routines
* Push readahead to 512kB
* Optimized square root algorithm
* Lz4 compression
* Many Zram tweaks
* Disable crc check for faster performance (upto 30% increase in i/o operations)
* Blocked some wakelocks for extra battery life
* Added many tcp controllers
default : westwood
Many more features to be added...so stay tuned
Installation Instructions
Note:- If you are coming from other kernel, flash your rom before installing it(dirty flash will work too) to avoid any conflicts.
Also if you are updating to latest release of paradox kernel,you must flash your rom before flashing latest paradox kernel.
Steps to flash :-
- reboot to twrp recovery
- clean cache and dalvik cache
- flash paradox zip
- reboot
- enjoy
Downloads
For download link and changelogs have a look at post #2
Credits
@LineageOs @google @savoca @faux123 @fransiscofranco @rainforce279 @hurtsky @xda community
I am doing it as my hobby in free time...and i am asking for just one thing in return...press the thanks button...it will encourage me to make this kernel better and better.
Click to expand...
Click to collapse
XDA:DevDB Information
Paradox kernel, Kernel for the Moto E
Contributors
DarkElf
Source Code: https://github.com/Akshay7273/MotoE
Kernel Special Features: DT2W,S2W,KCAL colour control
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2017-10-10
Created 2017-08-27
Last Updated 2017-10-10
Downloads + Changelogs
Downloads
Download latest release :- Paradox Kernel R4
Changelogs
*Paradox R4 10/10/17)
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs
Older changelogs:-
*Paradox R3 (04/09/17)
Added Ondemandpus and Wheatly cpu governors
Added Conservative gpu governor
Enable lionheart cpu governor (forgot to enable in last update)
Revert KCAL commit (it was already integrated,i readded it by mistake and thus some conflicts occured...But now its fixed)
zram: set default compressor to lz4
lib/int_sqrt.c: optimize square root algorithm
init: don't force selecting debug
mm: push readahead to 512kB
proc: much faster /proc/vmstat
block: scheduler: add ZEN
USB: android: Fix memory leak in mass_storage_function_init()
sync: don't block the flusher thread waiting on IO
writeback: fix occasional slow sync
writeback: fix race that cause writeback hung
readahead: make context readahead more conservative
its not over...many other patches
*Paradox R2 (30/08/17)
Switched to Linaro 5.4.1 toolchain
Remove anykernel method and using new template zip (thanks to @rainforce279)
Added wake gestures :-
DT2W
S2W
Pocket mode for dt2w
Added KCAL colour control
Added lionheart cpu governor
Added fsync on/off support
Enable fsync by default
arm: crypto: Add optimized SHA-256/224
crypto: arm/aes update NEON AES module to latest OpenSSL version
sched: cpu_power: Add controls for sched features
sched: archpower: disabled by default
bfq-sched: Forcefully lookup entities when the cache is inconsistent
some more patches
*Paradox-R1-08/26/2017
initial release
merged latest lineage 14.1 sources
added cpu governors :- impulse,smartmax
added i/o schedulors :- sio,tripndroid
added faux sound 3.4
added powersuspend and lcd notifier
disable crc check (faster performance)
added power efficient workqueues
block some driver wakelocks
added many tcp congestion controllers
set default tcp controller to westwood
FAQ section
FAQs
[Q] This kernel works in stock rom?
NO, this kernel is based on lineage sources and works on Lineage 14.1 and all other AOSP 7.x.x roms.
[Q] Got errors during flashing/after flashing this kernel...what to do now?
Well if you are coming from any other kernel you must dirty flash your rom once to avoid any conflicts.After dirty flashing your rom flash this kernel and you won't face any problems.Also use twrp latest version (recommended)
[Q] I am having some random reboots/bugs...what to do?
Just report it with last_kmsg which is located in /proc/last_kmsg or in case of any bugs report it with logcat and proper information about how you encountered it.I will do my best to resolve it asap.
[Q] how to tweak this kernel for advanced features (like dt2w on/off,s2w on/off or changing cpu governor or i/o sechdulors) ?
Use kernel adiutor app for playing with the kernel and change the settings according to your own taste.
[Q]How to ask for any features ?
You can ask in this thread...if I find feature useful and logical then it'll be added...I would appreciate if you link me with commit. It's really hard to dig in the sources and find the exact commit.
Double tap to wake is there ??
No i have not added it yet...but i am planning to add it soon...many more features are going to be added
Update R2
Hello guyss...here comes a big update Paradox R2.Many features have been added and many things have changed to make it better.
Remember to dirty flash your rom before installing this update
*Paradox R2 (30/08/17) Download here
Changelogs -
Switched to Linaro 5.4.1 toolchain
Remove anykernel method and using new template zip (thanks to @rainforce279)
Added wake gestures :-
DT2W
S2W
Pocket mode for dt2w
Added KCAL colour control
Added lionheart cpu governor
Added fsync on/off support
Enable fsync by default
arm: crypto: Add optimized SHA-256/224
crypto: arm/aes update NEON AES module to latest OpenSSL version
sched: cpu_power: Add controls for sched features
sched: archpower: disabled by default
bfq-sched: Forcefully lookup entities when the cache is inconsistent
some more patches
after installing it my screen looks green and calibrated the colors and returns to look green
Luis Infante said:
after installing it my screen looks green and calibrated the colors and returns to look green
Click to expand...
Click to collapse
Luis actually its LiveDisplay conflicting with KCal...turn off live display from settings>> Display >> LiveDisplay ...after that display willbe normal. Thanks for trying my kernel by the way...
DarkElf said:
Luis actually its LiveDisplay conflicting with KCal...turn off live display from settings>> Display >> LiveDisplay ...after that display willbe normal. Thanks for trying my kernel by the way...
Click to expand...
Click to collapse
Ok i Will try it but i like use live display, another solution? And s2w is not working
Luis Infante said:
Ok i Will try it but i like use live display, another solution? And s2w is not working
Click to expand...
Click to collapse
Edit :- Ok guyss...i figured out the real issue...it was a tiny mistake by me and that's why when kcal colour was caliberated it automatically turned back...All is well now nd i will be updating it in an hour...this time the changelogs is gonna be huge.
S2W is working without any issues...its just disabled by default...if you want to use it then enable it first by kernel adiutor app.
Update R3
Paradox kernel R3
Download here
Remember to dirty flash your rom before installing this update (as always)
Changelogs
Added Ondemandpus and Wheatly cpu governors
Added Conservative gpu governor
Enable lionheart cpu governor (forgot to enable in last update)
Revert KCAL commit (it was already integrated,i readded it by mistake and thus some conflicts occured...But now its fixed)
zram: set default compressor to lz4
lib/int_sqrt.c: optimize square root algorithm
init: don't force selecting debug
mm: push readahead to 512kB
proc: much faster /proc/vmstat
block: scheduler: add ZEN
USB: android: Fix memory leak in mass_storage_function_init()
sync: don't block the flusher thread waiting on IO
writeback: fix occasional slow sync
writeback: fix race that cause writeback hung
readahead: make context readahead more conservative
its not over...many other patches
Nice kernel
Update R4
Yo guysss...its time for an update... I have been pretty much busy due to exams...finally its over and i'm back to developement.
This is the build for 7.x.x only...i haven't started on oreo yet...but i will do that shortly.
Paradox kernel R4
Download Here
Dirty flash you rom once before flashing as always...
Changelog
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs
DarkElf said:
Yo guysss...its time for an update... I have been pretty much busy due to exams...finally its over and i'm back to developement.
This is the build for 7.x.x only...i haven't started on oreo yet...but i will do that shortly.
Paradox kernel R4
Download Here
Dirty flash you rom once before flashing as always...
Changelog
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs
Click to expand...
Click to collapse
I have installed this and working fine.
sherindroid said:
Nice kernel
Click to expand...
Click to collapse
praveen139 said:
I have installed this and working fine.
Click to expand...
Click to collapse
Thanks for trying and using it mates...i'm happy my work is being used by moto e community...
Can you add FAUX SIMPLE GPU CONTROL please?
sherindroid said:
Can you add FAUX SIMPLE GPU CONTROL please?
Click to expand...
Click to collapse
Yes sure...i'll add it in next update...
DarkElf said:
Yes sure...i'll add it in next update...
Click to expand...
Click to collapse
Thanks
Viper OS + Paradox
Can anyone tell the battery life after installation of this kernal....?
Related
ZigZag Kernel
Disclaimer:
Code:
#include
/*
* Your warranty is now void
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
ZigZag kernel is a heavily modified kernel which guarantees to improve your performance and battery. This kernel has proved to improve FPS so, gamers this is a good kernel for you!
Features:
Compiled with UBERTC 6.0 Toolchain
Added -Ofast flags for insane optimizations
Enabled f2fs compatibility
Enabled UKSM(Ultra Kernel Samepage Merging)
Enabled Buffer Overflow protection(Enhances security)
Added Async Fsync ported from HTC devices by faux123 and adapted to linux 3.10 by imoseyon
Added mako hotplug driver by @franciscofranco
Added sweep2wake, sweep2sleep and doubletap2wake functionality
Additional governors: Smartmax, Hybrid
Additional I/O schedulers : ROW, FIOPS
Many many tweaks for responsiveness(Improved FPS)
ThunderQuake Engine by varun chitre
This kernel works with ROM's built after 10th June and supposedly stock ROM's!!
Downloads: https://www.androidfilehost.com/?w=files&flid=33940
Older versions:
https://basketbuild.com/devs/W4TCH0UT/sprout/ZigZag
Credits:
Google
faux123
imoseyon
franciscofranco
flar2
thewisenerd for s2w,s2s and dt2w
Much thanks goes out to @intersectRaven for majority of his patches.
Also thanks to @varun.chitre15 for many tweaks(ThunderQuake Engine made by him is included in this)
All others whose code I read regularly to learn
Also thanks to my buddy @akhilnarang
Changelogs on post #2
FAQ's on post #3
Enjoy people!
XDA:DevDB Information
ZigZag, Kernel for the OEM Cross Device Development
Contributors
##W4TCH0UT##, intersectRaven
Source Code: https://github.com/W4TCH0UT/zz_sprout
Kernel Special Features: Extra governors, I/O schedulers -Ofast optimization and other tweaks
Version Information
Status: Stable
Current Stable Version: 1.9
Stable Release Date: 2015-06-25
Created 2015-06-10
Last Updated 2015-07-04
Changelogs
ZigZag 2.0:
Fixed mako hotplug to work properly on all 4 cores.
Added alucard's hotplug driver.
Updated to linux 3.10.83.
ZigZag 1.9:
Updated to linux 3.10.81
Added mako hotplug driver by franco
ZigZag 1.8:
Added advanced TCP congestion algorithms(westwood as default)
Added CPU boost driver
Increse zram devices
Patches to filesystem
Fixed many potential memory leaks
Update NEON AES module
ZigZag 1.7:
Patches to Power / PM drivers(increased responsiveness and battery)
Reduce freezes caused by hotplug(thx to varun for base patch)
Smartmax as default governor(no freezes, works more smoothly)
Patches to slub / slab (efficient memory usage, thus increasing performance)
Fixed some more memory leaks
ZigZag 1.6:
Fixed freeze when phone was on stand-by
More patches to mm for fixing some memory leaks
Added Fair Queue Scheduling, HHF and PIE filtering
Humongous amount of patches to cpuidle for better cpu functioning
ZigZag 1.5:
Compiled with UBERTC 6.0 Toolchain(performance at it's greatest, can't provide more optimization than this )
Added Asynchronous Fsync, ported from HTC devices by faux123(To enable it, use an app like performance control)
Improved KSM and UKSM(To enable this also use an app like performance control)
Added quickwakeup driver for faster wakeup
Patches to mm(performance increased)
Patches to power(battery improved)
More faster working of the cpu through improved math algorithms(performance increased)
Many random patches for responsiveness.
ZigZag 1.4:
Patched cgroup for performance improvements
Patched workqueue for performance and battery improvements
Patched mm
Patched KSM
Many random patches and tweaks also integrated.
ZigZag 1.3:
Removed sioplus i/o scheduler
Removed smartassh3 governor
Updated FIOPS I/O scheduler
Added -Ofast optimization flags
Many other tweaks added
ZigZag 1.2:
Added hybrid and smartassH3 governors
Added FIOPS I/O scheduler
Added UKSM(Ultra Kernel Samepage Merging)
Added more tweaks to vfp for performance improvements
ZigZag 1.1:
Fixed kernel version not showing
Fixed sioplus I/O scheduler not sticking when set to default
ZigZag 1.0:
Initial build of ZigZag
FAQ's
How can I enable sweep2wake, sweep2sleep and doubletap2wake in this kernel?
- To do this, first open up a terminal. Then type:
For sweep2wake:
Code:
echo [mode] > /sys/android_touch/sweep2wake
For sweep2sleep:
Code:
echo [mode] > /sys/android_touch/s2w_s2sonly
For doubletap2wake:
Code:
echo [mode] > /sys/android_touch/doubletap2wake
Modes available:
0 - disable
1 - enable
How to set the vibration intensity with ThunderQuake Engine?
- Again, open up a terminal. Type:
Code:
echo [value] > /sys/kernel/thunderquake_engine/level
Values available: 0 - 7
Why none of my videos are playing and I'm having issues with viper4android?
- Just change your selinux mode to permissive with the help of an app called selinux mode changer. Google it.
Install that app, then open it and tap on permissive to enable the permissive selinux mode. Also tick the box that shows you the notification when the selinux mode is changed.
That's it, now after every reboot selinux will be set to permissive and all those issues will be gone.
Help me! This bug has caused me XYZ issue!!
- Simply take a logcat of the issue and then post it here.
Little OT is OK, but go too far and you will get a warning!
Thanks
Great Kernel @##W4TCH0UT##
New version uploaded!!
ZigZag 1.1:
- Fixed kernel version not showing
- Fixed sioplus I/O scheduler not sticking
Click to expand...
Click to collapse
Enjoy people!
Regards
Wow now , many dev build kernel for this device
Awesome ? , I wanna try you kernel , but what is chnge log 1.1 about your kernel ? @##wh4tchout##
---------- Post added at 10:49 AM ---------- Previous post was at 10:47 AM ----------
Ooh sory for late post , cz i dont see before , you post about change log 1.1
##W4TCH0UT## said:
New version uploaded!!
Enjoy people!
Regards
Click to expand...
Click to collapse
sir, how to use s2s?
tandob said:
sir, how to use s2s?
Click to expand...
Click to collapse
Read FAQ on post #3 before posting anything.
Regards
##W4TCH0UT## said:
Read FAQ on post #3 before posting anything.
Regards
Click to expand...
Click to collapse
sorry sir, but I does not write that how to enable I just written how to use which is not present in FAQ.
tandob said:
sorry sir, but I does not write that how to enable I just written how to use which is not present in FAQ.
Click to expand...
Click to collapse
To enable s2s, type this in terminal:
Code:
echo [mode] > /sys/android_touch/s2w_s2sonly
modes available:
0 - disable
1 - enable
Regards
New build uploaded!
ZigZag 1.2:
- Added hybrid and smartassH3 governors.
- Added FIOPS I/O scheduler
- Added UKSM(Ultra Kernel Samepage Merging)
- Added more tweaks to vfp for performance improvement.
Click to expand...
Click to collapse
Enjoy!
Regards
Its A Great Kernel...But There's A Major Bug In The Kernel As Wifi Is Not Working After Flashing The Kernel....
Lakku said:
Its A Great Kernel...But There's A Major Bug In The Kernel As Wifi Is Not Working After Flashing The Kernel....
Click to expand...
Click to collapse
@Lakku flash it only on an update ROM, else WiFi /RIL won't work because of enforcing selinux
I Have Latest cm 12.1 beta 4
Lakku said:
I Have Latest cm 12.1 beta 4
Click to expand...
Click to collapse
Updated meaning anything that was built last night/today
Sent from my A0001 using Tapatalk
Oh ...Now I GOt It......Thanku....I Will Try Today And Report U Soon....Thanku Very Much....
New build uploaded!!
ZigZag 1.3:
- Added -Ofast flag(maximum optimization and performance)
- Updated FIOPS I/O scheduler
- Removed SIOplus I/O scheduler as it was causing issues
- Many tweaks to vfp and optimized code to a higher extent
Click to expand...
Click to collapse
Only works on ROM's that were built yesterday or today!!
Enjoy!!
Regards
##W4TCH0UT## said:
ZigZag Kernel
Disclaimer:
Code:
#include
/*
* Your warranty is now void
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
ZigZag kernel is a heavily modified kernel which guarantees to improve your performance and battery. This kernel has proved to improve FPS so, gamers this is a good kernel for you!
Features:
Compiled with GCC 5.1 Toolchain
Added -Ofast flags for insane optimizations
Enabled f2fs compatibility
Enabled UKSM(Ultra Kernel Samepage Merging)
Enabled Buffer Overflow protection(Enhances security)
Added sweep2wake, sweep2sleep and doubletap2wake functionality
Additional governors: Smartmax
Additional I/O schedulers : SIOPlus
Many many tweaks for responsiveness(Improved FPS)
ThunderQuake Engine by varun chitre
This kernel works with ROM's built after 10th June and supposedly stock ROM's!!
Downloads:https://basketbuild.com/devs/W4TCH0UT/sprout/ZigZag
Credits:
Google
Much thanks goes out to @intersectRaven for majority of his patches.
Also thanks to @varun.chitre15 for many tweaks(ThunderQuake Engine made by him is included in this)
Also thanks to my buddy @akhilnarang
Changelogs on post #2
FAQ's on post #3
Enjoy people!
XDA:DevDB Information
ZigZag, Kernel for the OEM Cross Device Development
Contributors
##W4TCH0UT##, intersectRaven
Kernel Special Features: Extra governors, I/O schedulers -O3 optimizations and other tweaks
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-06-10
Created 2015-06-10
Last Updated 2015-06-11
Click to expand...
Click to collapse
Good Job Mate!!
Regards
@dark_optimistic AKA Vipul Jha
caution!!!
I jst flashed v1.3 but my both sim card go offline.
showed no sim card.
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
currently I m using cn12.1 beta 4 on micromax canvas A1. please help
Same Problem with Me Brother....Even Wifi Is Not Working...U Have to install the latest night build or latest build of your rom to enjoy this kernel....
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
==================================================
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to cm kernel or dirty flash your rom before flash this!
Requirement
TWRP
Aosp 6.0.x - 7.x.x
Doesn't required to wipe dalvik/art cache !
Features
Latest Source Lineage OS
Hybrid Kernel (mixed commits and backport)
Clarity Hotplug (MPdecision by default)
Compiled with Hyper Toolchain 5.x (LxU)
Wake Gesture (DT2W) with Pocket mode (enabled by default)
Franko Fsync control
Franko Wakelock Control
add smartmax, lionheart, pegasusq, impulse, nightmare CPU governors
Arch Power & Gentle Fair Sleeper Control
add Sio, Zen, Fifo, Vr I/O schedulers
Faux Simple GPU Control
Faux Sound Control
io switcher (automatic switch to i/o scheduler 'fifo' when screen is off to save some power)
More
Features lite
Latest Source Lineage OS
Compiled with standart toolchain eabi 4.9.4
Wake Gesture (DT2W) with Pocket mode (enabled by default)
To Manage Clarity Hotplug use Unofficial Kernel Adiutor
and Wait till grarak merging my pull request to official source Kernel Adiutor.
Change Logs
Please check at my github
BUGS ?
You tell me with dmesg and last_kmsg logs
Credits
Google | Motorola | Lineage OS
Squid2 | Francisco Franco | Christopher83 | Savoca | Arter97 | Faux123 | frap129 | Sultanxda | Hurtsky
Download
Hybrid | Lite
https://www.androidfilehost.com/?w=files&flid=196522
Donating List
@electrohippie = $10
==== Thanks for Donating ====
Keep this project alive by donating to me
Donate Me
XDA:DevDB Information
Clarity Kernel, Kernel for the Moto E
Contributors
rainforce279
Source Code: https://github.com/ryan-andri/kernel_motorola_motoe
Kernel Special Features: DT2W, Hybrid
Version Information
Status: Stable
Current Stable Version: Final
Stable Release Date: 2017-09-23
Created 2016-11-29
Last Updated 2017-09-23
FAQ (Frequently Asked Questions)
Q: this kernel works for stock rom ?
A: no.
Q: hey, i got a problem with this kernel ? what should i do ?
A: post driver messages (dmesg) and kernel messages (last_kmsg) with your rom information (android version/name of rom). see here How to properly post a bug
Q: do i need wipe dalvik cache after flashing this ?
A: no needed.
Q: i have a request some features ?
A: post in this thread or pm me. since your request is usefull, i'll do that for you.
Q: can you overclock/underclock/undervolts this kernel ?
A: i don't want put extremely non-standart feature to this kernel, it will kill our device.
Nice to see you back!
Downloading right now..
Inviato dal mio Moto E utilizzando Tapatalk
Kernel Master is back !!
Enjoying your kernel since lollipop !!
_/\_
Great !!
Yeaaahh glad to see you back bro, Ryan Andri!
Using your kernel since cm12 was released. Can't wait for your Clarity Revolution!
Please make two versions one with d2w and other without that just like u made for cm13. Thanks
Ujwal Agrawal said:
Please make two versions one with d2w and other without that just like u made for cm13. Thanks
Click to expand...
Click to collapse
You can turn off d2w from kernel auditor.
Ujwal Agrawal said:
Please make two versions one with d2w and other without that just like u made for cm13. Thanks
Click to expand...
Click to collapse
+1
Papdya said:
You can turn off d2w from kernel auditor.
Click to expand...
Click to collapse
Thats always possible but the d2w version seems less stable and causes issue when d2w is turned off. Thats just my past experience and may not be true for everyone. Thats why m little cautious.
Also kernels by rainforce279 are always awesome and thanks to him for developing them
Awesome ..... Thank you so much !!!!!!!!!!!
Awesome
Sent from my Moto E using Tapatalk
Update to 1.1 [stable inline]
Logs
so i rebase old source with new commit and bring some features
- make 2 version DT2W and Non-DT2W
- Compiled with Linaro 5.2
- Powersuspend 1.7
- Lcd Notify.
- Doubletap2 Wake support (DT2W enabled by default).
- GestureWake with Pocket Mode.
- Faux Simple GPU Algorithm
- I/O Scheduler: Zen, TripNdroid, Sio, Fifo
- Governor: Intellidemand, Intelliactive, Nightmare, Lionheart
- Franco Fsync
- Faux Sound control
- Intelliplug 5.0
- Gentle fair sleeper and Arch Power Sysfs control
Download
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
What is LCD notify???
rainforce279 said:
Logs
so i rebase old source with new commit and bring some features
- make 2 version DT2W and Non-DT2W
- Compiled with Linaro 5.2
- Powersuspend 1.7
- Lcd Notify.
- Doubletap2 Wake support (DT2W enabled by default).
- GestureWake with Pocket Mode.
- Faux Simple GPU Algorithm
- I/O Scheduler: Zen, TripNdroid, Sio, Fifo
- Governor: Intellidemand, Intelliactive, Nightmare, Lionheart
- Franco Fsync
- Faux Sound control
- Intelliplug 5.0
- Gentle fair sleeper and Arch Power Sysfs control
Download
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
Click to expand...
Click to collapse
Huge Thanks man for making two different versions.:good:
Good job mastahhh
Push stable 1.2
changelogs
- replace Esdfs to sdcardfs (Testing for force allow apps on external storage)
- patch / commit for lowmemory killer
- aio: convert the ioctx list to radix tree (reduce some overhead)
- readahead: make context readahead more conservative (increase EXT4 performance)
- power efficient workqueues (Save some Power)
- enable quick wakeup (Save some Power)
- more
check my github if full changelogs
thanks
Download
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
@rainforce279 thank you for always listening to our requests,
Awesome ??
Sent from my Moto E using Tapatalk
rainforce279 said:
changelogs
- replace Esdfs to sdcardfs (Testing for force allow apps on external storage)
- patch / commit for lowmemory killer
- aio: convert the ioctx list to radix tree (reduce some overhead)
- readahead: make context readahead more conservative (increase EXT4 performance)
- power efficient workqueues (Save some Power)
- enable quick wakeup (Save some Power)
- more
check my github if full changelogs
thanks
Download
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
Click to expand...
Click to collapse
Nice work thanks ??
@rainforce279 could you plzz explain what is LCD notify ??
Ujwal Agrawal said:
@rainforce279 could you plzz explain what is LCD notify ??
Click to expand...
Click to collapse
ok,
lcd notify is just little driver,
thats will notify some driver when state lcd on or lcd off.
lcd notify can't configure by user.
This is SomeFeaK kernel, based on Squid2's kernel for device codename "osprey".
This is the first time I build a kernel, also, the first time I post something in DevDB. Hope you like this kernel and please expect many releases.
The kernel should work in stock and custom ROMs, with any variant. Tested and working in XT1601 (LATAM).
Disclamier:
Code:
[COLOR="red"]* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*[/COLOR]
Features:
From squid2's r19 build:
Moderately undervolted
Updated to Linux 3.10.104
Synced with latest CodeAurora changes
Improved memory management
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
IntelliPlug CPU hotplug (by faux123)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.9
Vibration intensity control
Compiled with Linaro GCC 6.2 and optimized for Cortex A53
Stripped down and optimized configuration
Added by me:
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Double tap to wake (DT2W).
Permanently fixed screen flickering: SELinux works fine in permissive or enforcing mode.
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Drastically improved CPU thermal control: should react approximately from 40°C and end if lower than 35°C are reached. Otherwise it'll keep trying to cool the device, protecting, mainly, the battery.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver.
Use the hidden LED as a notification light.
Enabled forced consistency checks for F2FS (/data).
Multi-Cluster Power Management (less CPU battery drain).
KSM (Kernel Samepage Merging).
Advanced Power Management (emulated).
SMT (Simultaneous Multi-Threading).
Fixed temperature handling.
Dev info:
In order to make use of the new hidden LED's available behavior, it's needed that some Java developer (not me, I don't know a thing about Java) to develop an application. Here I'll give you a sort of "API" that you should use to wake up the required triggers for "if there's a notification or not".
To turn on the LED set trigger to default-on:
Code:
su -c "echo default-on > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
To turn off the LED set trigger to none:
Code:
su -c "echo none > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
I've also added the required modules for the LED to be able to process a hold on during "x" milliseconds and keep off during "x" milliseconds. To set it do it like as follows.
Switch trigger to timer:
Code:
su -c "echo timer > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
Now, set time on during 0,5 seconds (500 milliseconds):
Code:
su -c "echo 500 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_on"
Now, set time off during 1 second (1000 milliseconds):
Code:
su -c "echo 1000 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_off"
For now, you must have a charger connected. It seems to be a hardware issue but I'll try to investigate it anyways.
Click to expand...
Click to collapse
Release history:
Code:
4.53 (stable): June 16, 2017:
Kernel changes:
- fs: fsync will now be enabled by default (prevents data loss if a kernel panic occurs).
- cpu/hotplug: removed broken lazyplug hotplug driver, better handling for hardware hotplugging.
- cpufreq: added intellidemand, smartmax, wheatley, smartmax_eps, pegasusq, authority.
- input/touchscreen: updated DT2W driver, still not stable, more responsive and stable touchscreen.
- sched: fixed zen, fixed and added sio.
Other changes: first build for osprey coming soon.
4.30 (stable): June 14, 2017:
Kernel changes:
- hotplug: added lazyplug (broken, don't use).
- input/touchscreen: fixing DT2W.
- sched: added sio.
Other changes: none.
4.25 (stable): June 13, 2017:
Kernel changes:
- ksm: updated code and better management, enabled checking before swapping pages, reduce cpu
- swap: updated code, got better management by adding some compression drivers.
- input/soc: added powersuspend driver, this will help DT2W work better.
- random: added frandom support, decrease CPU load for entropy generation.
- mem: enabled memory changes tracking.
- sched: added tripndroid, vr, zen.
- usb: enabled fast charge by default.
Other changes: no tool required to setup anymore, default setup won't overheat your device nor damage it; due to recently added support for surnia, every new release will be respectively named with a suffix like '-harpia' or '-surnia'; new project logo (for DevDB), thanks to @lecron89 .
4.18 (stable): June 12, 2017
- cpu: rolled back extreme overclock, new max clock: 1593 MHz.
- gpu: rolled back extreme overclock, new max clock: 465 MHz.
- cpufreq: fix build for 'darkness' governor.
- cpufreq: added new CPU governors: yankactive, zzmoove, darkness and bioshock.
4.00 (stable): June 9, 2017
- cpu: undervolted and overclocked, max freq. 1785 MHz (recommended: 1593Mhz).
- gpu: overcloked, max freq. 650 MHz.
- flashing: fixed bug where the touchscreen would become unresponsive after any kernel update.
3.90 (stable): June 8, 2017
- usb: use your device as an USB gadget, including keyboard and mouse.
- general: updated defconfig for harpia at source to match new features.
3.81 (stable): June 7, 2017
- wlan: updated drivers, solved remaining crashes and battery drain.
- prima: updated drivers.
- usb: added support for xpad joysticks (XBOX).
- cpu: fixed hotplugging driver "thunderplug", used to crash the device while allowing the user to pick "octa-core mode" when it's a quad-core device.
- cpu: hotplugging driver "alucard", default minimum of 1 (one) cpu online.
- general: performance improvements for touchscreen, GPU and variables definition.
3.61 (stable): June 4, 2017
- Added S2S (Sweep to Sleep): swipe from the navbar from right to left or from left to right to make the device go to sleep.
3.60 (stable): June 4, 2017
- In the stock ROM, the audio won't skip anymore (tested).
- The wlan driver shouldn't crash again (updated with Heliox sources).
- Re-added missing Adreno Idler driver.
3.52 (stable): June 1, 2017
- Hotfix: DT2W won't freeze the screen anymore.
3.51 (stable): May 31, 2017
- Hotfix: re-added missing hotplug driver (thunderplug).
3.5 (stable): May 31, 2017
- Reverted patches for sdcardfs (they broke the media scanner).
- USB fast charge.
- FauxSound gain control.
3.11 (stable): May 29, 2017
- Patches for sdcardfs.
- Patches for wlan.
- Patches for less power consumption.
- Re-added missing features: KSM (Kernel Samepage Merging) and TCP congestion control algorithms (veno, illinois, westwood and vegas).
3.0 (stable): May 29, 2017
- Added governors: impulse and elementalX.
- DT2W (Double tap to wake).
- Adreno Idler (reduce GPU frequency and resources if inactive).
- Added hotplug drivers: allucard and thunderplug CPU.
2.1 (stable): Februrary 8, 2017
- Rolled back to default SELinux setup.
- Switched default GPU governor from "msm-adreno-tz" to "simple_ondemand" for better battery and performance balancing.
- Fixed screen flickering bug by disabling debugging in graphics card. (SELinux socket overflow).
- Fixed noisy output if using audio MODs by disabling aggressive debugging for sound card. (SELinux socket overflow).
2.0 (stable): February 5, 2017
- Permanently fixed the screen flickering: you won't see any flickers while running SELinux in permissive or enforcing mode. This is going to work even if you build the kernel from source.
1.3 (stable): January 31, 2017
- Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
- Set default TCP congestion manager to "veno" for lesser lags while heavily loading the networking area.
1.2 (beta): January 29, 2017
- Fixed SELinux: permissive mode works again.
- Decreased SELinux activity (even more).
1.1 (beta): January 29, 2017
- Restored previous setup for audio amplifier DAC: switched input gain from 4 to 5. Reason: the output felt like if it is cropping some frequencies.
- Modified CPU cooling driver to get more sensitivity as when to react and how far the temperatures should reach. (experimental, please report if horribly lags)
1.0 (beta): January 27, 2017
- Automatic thermal throttling and CPU cooling driver added and enabled.
- Enabled CPU current throttling driver.
- Decreased audio amplifier DAC input gain to 4 from 5 (solves distorted output while using audio mods like [B]Dolby Atmos[/B])
0.3 (experimental): January 26, 2017
- Added available triggers for LED to: show cpu usage by core, blink like heartbeat, blink with interval and full on.
- Disabled swap pages caching (frontswap).
0.2 (experimental): January 25, 2017
- Enabled swap pages compression.
- Enabled swap pages caching (frontswap): better RAM management.
- Enabled cleancache for faster swap handling.
- Decreased SELinux activity and removed almost every security check.
- Enabled F2FS forced consistency checks.
- Enabled Multi-cluster power management (even better power management and less temperature).
0.1 (experimental): January 24, 2017
- Initial release.
Downloads:
Click here or go to Downloads tab at the top of the thread.
If something goes wrong with the XDA download server or you simply want to download from somewhere else, I've been approved as developer at AFH. All downloads will also be posted here.
NEW! Ask for features, report bugs, get help with installation, usage and everything else. Join us at Telegram: t.me/somefeak
Bugs:
Doubled frequency on GPU clocking (465 MHz step repeats).
You tell me.
Bugs marked with a "*" will be fixed in the next release.
XDA:DevDB Information
SomeFeaK Kernel for Moto G 2015 (3rd gen.), Kernel for the Moto G 2015
Contributors
facuarmo, chijure, Dark98, squid2, TeamMex
Source Code: https://github.com/FacuM/android_kernel_motorola_msm8916
Kernel Special Features: The kernel features: everything from r19 Squid2's build, KSM (Kernel Samepage Merging), SMT (Simultaneous Multi-Threading), Advanced Power Management (emulated), advanced LED contro, DT2W and impulse and elementalX governors.
Version Information
Status: Stable
Created 2017-06-17
Last Updated 2017-06-27
Changelog (v4.53):
Kernel changes:
fs:
* fsync will now be enabled by default (prevents data loss if a kernel panic occurs).
cpu/hotplug:
* removed broken lazyplug hotplug driver.
* better handling for hardware hotplugging.
cpufreq:
* added intellidemand.
* added smartmax.
* added wheatley.
* added smartmax_eps.
* added pegasusq.
* added authority.
input/touchscreen:
* updated DT2W driver, still not stable.
* more responsive and stable touchscreen.
sched:
* fixed zen.
* fixed and added sio.
selinux:
* only show errors.
Other changes:
None.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25196
Alternative link: https://www.androidfilehost.com/?fid=745425885120742248
Finally, thanks! Testing
Laloo' Hdez said:
Finally, thanks! Testing
Click to expand...
Click to collapse
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
Testing
facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
Don't booting on MokeeROM 20170616
facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
It's not booting on official RR for osprey.
It's not booting on Viper OS 2.0...
Thanks for testing, an experimental hotfix will be up in some minutes.
Changelog (v4.53-1):
EXCLUSIVE BUILD: only for osprey, fixed boot (cpu not starting).
Kernel changes:
None.
Other changes:
config:
* fixed defconfig for osprey.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25198
Alternative link: https://www.androidfilehost.com/?fid=889764386195909633
I'm very thankful with everyone who had flashed and tried it.
@facuarmo, it still won't boot on official RR. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo.
adityak1303 said:
@facuarmo, it still won't boot on official RR. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo.
Click to expand...
Click to collapse
Thanks for reporting, please stay tuned at the Telegram group, I'm gonna throw away some exp. builds for you to test so I stop bothering with non-working builds. Please help .
facuarmo said:
Thanks for reporting, please stay tuned at the Telegram group, I'm gonna throw away some exp. builds for you to test so I stop bothering with non-working builds. Please help .
Click to expand...
Click to collapse
No problem. I'm there to help.
It's not booting up. Aosp extended 4.3 build. Doesn't get past to the boot logo.
it still won't boot on aospxtended. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo. Is the xt1543 variant
Changelog (v4.80):
Kernel changes:
sensors/accelerometer:
* fix bugs and driver random crashes.
sound/ALSA:
* fix crashes and crackling.
* get rid of inifinte loops.
video/kgsl:
* general performance and stability improvements.
power/wake:
* added wakelock toggles for wlan_rx, wlan_ctrl, wlan and bluesleep.
* better performance and responsiveness after suspend.
usb:
* less console spamming.
networking:
* speed improvements.
input/touchscreen:
* add generic touchboost driver.
cpufreq/general:
* prevent random scaling failiures.
Other changes:
flashing:
* added Aroma Installer. (only harpia)
* pick if you want to flash bootlogo or not thanks to Aroma Installer.
bootlogo:
* added built-in SomeFeaK's official bootlogo, made by @jasonmerc . P.S.: thank you so much.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25334
Alternative link: https://www.androidfilehost.com/?fid=673368273298966924
Code:
MD5: 6de0da7f970db0b98321604a4ccb7dc8
facuarmo said:
Changelog (v4.80):
Kernel changes:
sensors/accelerometer:
* fix bugs and driver random crashes.
sound/ALSA:
* fix crashes and crackling.
* get rid of inifinte loops.
video/kgsl:
* general performance and stability improvements.
power/wake:
* added wakelock toggles for wlan_rx, wlan_ctrl, wlan and bluesleep.
* better performance and responsiveness after suspend.
usb:
* less console spamming.
networking:
* speed improvements.
input/touchscreen:
* add generic touchboost driver.
cpufreq/general:
* prevent random scaling failiures.
Other changes:
flashing:
* added Aroma Installer. (only harpia)
* pick if you want to flash bootlogo or not thanks to Aroma Installer.
bootlogo:
* added built-in SomeFeaK's official bootlogo, made by @jasonmerc . P.S.: thank you so much.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25334
Alternative link: https://www.androidfilehost.com/?fid=673368273298966924
Code:
MD5: 6de0da7f970db0b98321604a4ccb7dc8
Click to expand...
Click to collapse
It works! thank you so much
I'm in MokeeROM 71.2 20170624
Laloo' Hdez said:
It works! thank you so much
I'm in MokeeROM 71.2 20170624
Click to expand...
Click to collapse
WOAH!!! THANKS FOR REPORTING. Finally got this booting on osprey, hope you enjoy it :fingers-crossed:.
facuarmo said:
WOAH!!! THANKS FOR REPORTING. Finally got this booting on osprey, hope you enjoy it :fingers-crossed:.
Click to expand...
Click to collapse
Booted on lineage os 14.1 official
---------- Post added at 06:04 AM ---------- Previous post was at 05:52 AM ----------
@facuarmo, the kernel is working on official RR for osprey. DT2W is also working fine for now. Would you recommend any particular governer or settings for good performance?
Hello everyone! I want to present you this kernel based on Boeffla-Kernel with so many improvements, features and customizations.
For the configuration, I recommend Boeffla Config app. For beginners, just flash this kernel and forget.
If you want to even customize every part of your phone, you can modify INT, MIF and ABB voltages, install Synapse kernel manager
Disclaimer: I am not responsible for anything that happens to your device. This kernel is tested by me but it is not impossible that something bad may happen to your device due to unstable settings.
Features (See the changelog for more details):
Supports both Experimental LineageOS and Official LineageOS (and its derivatives)
Enhanced memory management
FIOPS I/O scheduler
Working magisk hide
Passes the safetynet check
arm optimized instruction set
Compiled using UBERTC GCC 7.2.1
Link time optimization
SELinux set to permissive by default
F2FS: Backported some changes from Linux 4.3
F2FS: Fully backported from Linux 4.2
F2FS Backported from Linux 4.2 (by @arter97). As you know, CM kernels use f2fs backported from Linux 3.17, but this kernel uses a higher and much updated version.
Supports undervolting CPU, GPU, MIF and INT (thx @AndreiLux). Most kernels allow undervolting CPU and GPU ONLY but this kernel allows you to undervolt almost everything.
Adaptive Body Bias Control (thx @AndreiLux)
Supports over clocking up to 1.8GHz
Multicore power saving control
Doze enabled by default
Improved caching and memory management
all Boeffla and Elite Boeffla Kernel goodies
and much more including internal improvements and backports
Credits:
@arter97
@AndreiLux
@Oebbler
@A$teroid
@DerTeufel1980
@Lord Boeffla for his great kernel
Do you like my work? Then a coffee will be of great help for me. :highfive:
https://paypal.me/Pascua706
Addons:
Boeffla Config app
Synapse kernel manager
Downloads:
https://drive.google.com/open?id=1y1w7pBsEFZA-eWIaHdvMD4qxMedGg7ad
XDA:DevDB Information
Hybrid Kernel, Kernel for the Samsung Galaxy S III I9300
Contributors
pascua28
Source Code: https://github.com/pascua28/Elite-Boeffla-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 11
Stable Release Date: 2018-06-27
Current Beta Version: 11.2
Beta Release Date: 2018-07-28
Created 2018-02-11
Last Updated 2018-08-01
Changelog (AGNi purecm base) *stopped
v2:
* Added alucard governor
* Msm hotplug
v1:
*vb2 and v4l updates from experimental lineageos kernel
*plane alpha from Exynos7
*backport Mount namespace
*dhd: reduce WiFi wakelock time
*add Boeffla config app compatibility
*apply LOS14.1 patches
Changelog:
For a more detailed information about the changes, please take a look here
Update 11:
* use tripndroid io scheduler
* enhanced power efficiency
* updated rwsem to Linux 3.10
* performance enhancements
* simplified mount namespace support
Update 10:
* use Debian arm-none-gcc (GCC 6.0) compiler
* stability fixes
Update 9:
* updated video driver
* more memory management backport
Update 8:
* power management enhancements
* memory management backports
* added FIOPS I/O scheduler
* block updated to Linux 3.3
Update 7:
* ARM optimizations
* pegasusq: smoother frequency scaling
* disable MobiCore initialization
* timer optimizations
* use glibc version of string and memcopy libs
* enable power efficient workqueue by default
* TTL mangle
* remove kernel logger control
Update 6:
* Remove android logger
* F2FS: applied some changes from Linux 4.3
* F2FS: completely merge F2FS changes from Linux 4.2
* N7100: add interactive and conservative CPU governors
* N7100: enable swap and ZRAM support
* N7105: initial support
* introduce lockless list
* drivers/serial: speed up wakeup
* speedup late resume
* shrinker: fix bug in fs/super.c
* added Synapse support
Update 5:
* nosec optimization
* optimized current_pt_regs() for arm
* tmu: remove memory throttling
* reduced some logging
* ipv4: save cpu cycles from check_leaf()
* update word-at-a-time lib
* net: Performance fix for process_backlog
* ASoC: pcm: use the power efficient workqueue for delayed powerdown
* Enable SECCOMP and SECCOMP_FILTER
* N7100: disable SND_DEBUG
* use Linaro GCC 7.1.x compiler
Update 4:
* LOAD_FREQ (4*HZ+61) avoids loadavg moire
* memory management improvements
* use Joe's RCU
* use 432 HZ timer
* intelli_plug not yet implemented for stability
* implement SECCOMP (secure computation)
* backport mount namespace from Linux 3.8
* revert video driver updates
* N7100: fix proximity sensor
* backport fq_codel packet scheduler from Linux 3.5
* revert vsync driver update to hopefully fix some issues
* use slicing-by-8 algorithm for crc32 and crc32c
* add frandom driver
* N7100: set westwood as default TCP congestion control algorithm
* N7100: add a bunch of TCP congestion control algorithms
* N7100: set AC maximum charge level to 2000mA
* N7100: set 1.6GHz maximum CPU frequency by default
* N7100: Enable overclocking up to 2.0GHz
* vfs: increase shrinker batch size
* superblock: add filesystem shrinker operations
* inode: remove iprune_sem
* superblock: introduce per-sb cache shrinker infrastructure
* superblock: move pin_sb_for_writeback() to fs/super.c
* inode: move to per-sb LRU locks
* inode: Make unused inode LRU per superblock
* inode: convert inode_stat.nr_unused to per-cpu counters
* vmscan: add customisable shrinker batch size
* added support for N7100
* cpufreq: Dynamic voltage stepping
* I9300: removed 2.0GHz and 1.9GHz overclock frequencies
* I9300: set maximum AC charger current to 1500mA, USB current to 1000mA, and wireless charger current to 1000mA. (previously 2100mA)
Update 3:
*fix touchkey light control
Update 2:
*f2fs: enhance multithread performance
*Use stock max frequency and stock governor
*Backport random driver from Linux 3.19+
*video: samsung: fimc: implement noti_ctrl_capture for u1
*[media] V4L: videobuf2: update buffer state on VIDIOC_QBUF
*media: vb2: Add support for synchronization
*media: samsung: fimc: add missing ctrl->cam checks
*Set SELinux to permissive
*lib/checksum.c: optimize do_csum a bit
*fs/buffer.c: remove redundant initialization in alloc_page_buffers()
*mutex: dynamically disable mutex spinning at high load
*lib: add weak clz/ctz functions
*Fix entropy depletion
*Net/neighbor: use power efficient work queue
*Squashed latest lineageos kernel commits
*Update video driver
Initial release:
*Remove ASIX Support
*Remove Network File System
*Remove sunrpc
*Remove joystick support
*Remove exFAT support
*Backport ramdom from Linux 3.17+
*Backport AIO from Linux 3.6
*Backport radix tree from Linux 3.4
*Fix cfg80211 memory leak
*Backport slub from Linux 3.3
*Backport F2FS from Linux 4.2
*Add multicore power saving support
*Add Adaptive Body Bias control
*Add INT and MIF voltage control
pascua28 said:
Hello! Today I release my kernel based on Elite Boeffla Kernel. The goal of this kernel is to have a very good performance and battery life.
This kernel has many improvements to ensure smooth performance.
Disclaimer: I am not responsible for anything that happens to your device. This kernel is tested by me but it is not impossible that something bad may happen to your device due to unstable settings.
Features:
*Compiled using UBERTC GCC 7.1
*Link time optimization
*F2FS Backported from Linux 4.2 (by @arter97)
*Supports undervolting CPU, GPU, MIF and INT (thx @AndreiLux)
*Adaptive Body Bias Control (thx @AndreiLux)
*Supports over clocking up to 2.0GHz (by @Oebbler)
*Multicore power saving control
*all Boeffla and Elite Boeffla Kernel goodies
*and much more including internal improvements and back ports
Credits:
@arter97
@AndreiLux
@Oebbler
@Lord Boeffla for his great kernel
Source: https://github.com/pascua28/Elite-Boeffla-Kernel
Click to expand...
Click to collapse
Sir can compiled n7100 if you want.
Thx this great kernel.
xress7 said:
Sir can compiled n7100 if you want.
Thx this great kernel.
Click to expand...
Click to collapse
Yes I can compile for Note 2 but I can't test it because I don't own a Note 2
pascua28 said:
Yes I can compile for Note 2 but I can't test it because I don't own a Note 2
Click to expand...
Click to collapse
Dont worry i can test and pass log
---------- Post added at 02:09 PM ---------- Previous post was at 02:06 PM ----------
pascua28 said:
Yes I can compile for Note 2 but I can't test it because I don't own a Note 2
Click to expand...
Click to collapse
are you graduation it or program.?
Hello. Thank you for this kernel ! Can i flash this to tw based roms (4.4.4 eclipse rom for example) or is it just for lineage or Cm roms ? thank you very much
Daviddsd said:
Hello. Thank you for this kernel ! Can i flash this to tw based roms (4.4.4 eclipse rom for example) or is it just for lineage or Cm roms ? thank you very much
Click to expand...
Click to collapse
No, only for lineageos
pascua28 said:
No, only for lineageos
Click to expand...
Click to collapse
Thank you very much sir
pascua28 said:
No, only for lineageos
Click to expand...
Click to collapse
Thanks recemmended configuration via boeffla app for better battery life ?
kosmasgr said:
Thanks recemmended configuration via boeffla app for better battery life ?
Click to expand...
Click to collapse
I use zzmoove governor - yank battery extreme. And undervolt cpu and gpu (you can use the undervolt profiles in the app. Just start with -25mV). If you want to even go further, you can undervolt MIF and INT. You can even adjust the abb voltage. But they are more advanced.
I also recmmend using the presets in the app
pascua28 said:
I use zzmoove governor - yank battery extreme. And undervolt cpu and gpu (you can use the undervolt profiles in the app. Just start with -25mV). If you want to even go further, you can undervolt MIF and INT. You can even adjust the abb voltage. But they are more advanced.
I also recmmend using the presets in the app
Click to expand...
Click to collapse
Thanks I stay with -25 UV
Hi guys! Expect for a new build later.
pascua28 said:
Hi guys! Expect for a new build later.
Click to expand...
Click to collapse
Thanks. Much appreciate
Hi)
Have you implemented HWC in your kernel or you planning this in the next releases?
pascua28 said:
Hi guys! Expect for a new build later.
Click to expand...
Click to collapse
Did you remove touchbuttons support by kernel ? There was setting on boeffla / display tab on first build of your kernel to control touch buttons . they remain off even i touch screen. Now not supporting
kosmasgr said:
Did you remove touchbuttons support by kernel ? There was setting on boeffla / display tab on first build of your kernel to control touch buttons . they remain off even i touch screen. Now not supporting
Click to expand...
Click to collapse
You can disable it in the settings. I think lineageos has a setting for it. Just look for buttons-> hardware buttons-> then look for illuminate buttons
xeno_den said:
Hi)
Have you implemented HWC in your kernel or you planning this in the next releases?
Click to expand...
Click to collapse
Yes or maybe?. Because there is also a ROM side implementation. I applied @forkbomb444's commits to this kernel so you can use his experimental lineageos which has a working hwc(only portrait mode)
pascua28 said:
You can disable it in the settings. I think lineageos has a setting for it. Just look for buttons-> hardware buttons-> then look for illuminate buttons
Click to expand...
Click to collapse
Thanks i was talking about touch led settings. As this picture. I illuminated buttons from rom settings and check to control them by kernel. They remain off when i touch screen and work only if i touch them with 3 seconds illumination timeout. Works excellent on your initial build of your kernel.
On 2nd build this setting disappeared from boeffla app . Could you check it please ? Its very important for battery life , the hw buttons to work only when we touch them and no when we touch the screen every time.
kosmasgr said:
Thanks i was talking about touch led settings. As this picture. I illuminated buttons from rom settings and check to control them by kernel. They remain off when i touch screen and work only if i touch them with 3 seconds illumination timeout. Works excellent on your initial build of your kernel.
On 2nd build this setting disappeared from boeffla app . Could you check it please ? Its very important for battery life , the hw buttons to work only when we touch them and no when we touch the screen every time.
Click to expand...
Click to collapse
Okay I'll check it
ArianoxxKernel For Samsung Galaxy S7 and S7 Edge
Kernel for the Samsung S7 and S7 Edge on TW/AOSP based Android Oreo 8.0
PLEASE, IF YOU LIKE MY WORKS DON'T FORGET TO DONATE ON:
https://paypal.me/arianoxxdev
Disclaimer:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
KERNEL INFORMATION
Built with: GCC 4.9 Toolchain
Kernel Base: G93XFXXS3ERI1
Ramdisk Base: G935FXXU2ERJ2
Linux Version: 3.18.124
AROMA INSTALLER OPTIONS
Install Magisk 17.1
Install Mtweaks 2.9.2
Delete Root Data
ArianoxxKernel BootSplash
FEATURES
*Based on latest ELS source
*Latest ramdisk from samsung
*Freq min GPU a 112MHz
*CPU UC for Big and Little Cluster
*GPU OC and UC 806mhz and 112mhz
*Voltage controll and CPU Undervolt
*AIK Kitchen 2.9
*-O3 Optimizations
*Many Performance and Battery optimizations
*TCP Congestion many options Westwood as default
*Updated Ondemand and Conservative governors
*Many Governorns to choose
*Schedulers many to choose cfq by default
*Mod Fake Knox 0
*Busybox 1.27.2
*SuperSu 2.82-SR4
*Magisk 16.2 & Manager 5.9.1
*Disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
*SELinux Permissive
*Swap with LZ4 compression
*Init.d support
*IO Schedulers: noop, deadline, cfq
*CPU Governors: impulse, conservative, ondemand, interactive, performance
*Reduced wifi wakelocks
* Boeffla wakelocks blocker
*Keep 3cores of cluster1 off during stand-by
*GPU Voltage & settings
*Battery settings
*Autoreset of Secure Storage
*Enabled hidden tcp-algorithm
*CIFS and NTFS support
*SafetyNet: GREEN
*Look 2nd post to see all features
DOWNLOAD
G930F/G935F: look 2nd post
How to install:
0. Backup EFS as always!!!
1. Download the latest kernel version zip file
2. Go to recovery
3. Flash the kernel zip
4.Choose aroma selection
5.Reboot
TELEGRAM CHANNEL
https://t.me/ArianoxxDev
Post Installation
Give a bit at the kernel to settle
If u find bug, send me last_kmsg
CREDITS + THANKS
Samsung Open Source Release Center for the Source code
@osm0sis
@farovitus
@morogoku
@Tkkg1994
@Manok98
@Lukas0610
@Jole7 for testing
@IAmWolf94 for his test
@Giorgatzelos for some aroma help
@ModX81 for his moded and bootloader updater-script
@WolverineBeast a lot aroma help
Other devs that I have taken commits from which are credited in Github
XDAevDB Information
ArianoxxKernel , Kernel for the Samsung Galaxy S7 Edge
Contributors
Arianoxx
Source Code: https://github.com/ArianoxxKernel-G935F/ArianoxxKernel
Kernel Special Features:
Status: Stable
Current Stable Version: 2.1
Linux Version: 3.18.124
Stable Release Date: 2018-11-08
Created 2018-06-22
Last Updated 2018-11-08
CHANGELOG
V2.1
*Update modem and bootloader (thanks to @ModX81)
*Rebuild aroma [thanks to @wolverineBeast]
*Update ELS base to ERI1
*Update ramdisk to ERJ2
*Update linux to 3.18.124
*Update busybox
*Defconfig: disable some log
*Update magisk to 17.1
*Fix random reboot
*Clean up code
*A lot of other optimization (check github)
*Add cpufreq_notify_utilization
*Kconfig add line
*Update gcc4.9
*Interactive: don't scale up if load is <= 6%
*Trace: exynos-ss: only dump first task to prevent flooding
*Bcmdhd: fix CONFIG_HZ dependency
*Panel: add reversible smart dimming brightness control
*Ramdisk: Patch dalvikcache_data_file
*Add support for odm
*Fully remove knox
*Fix ramdisk script issue
*Defconfig: disable some tracers
*Defconfig: disable integrity check
*Cpufreq: interactive: don't scale up if load is <= 6%, it's not worth it
*Mobicore: reduce kernel log output
*Defconfig: disable profiling
*Fix adb
V2.0
*Everything is changed
V1.3
*Private mod fix
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Switched to custom TC
*Rebased
*Try to fix sdcardfs
*Disable zram by default
*Disable secure_camera (thanks to @twy2004)
*Update wakeclock blocker
*Update mtweaks to 2.9.2
*Update ramsik to ERF4
*Ramdisk: fix recovery issue
*ArianoxxKernel spashscreen in aroma
*Ipv4: Disable KNOX
*Dts: Increase charge levels
*Ipv4: set initial TCP window size to 64K (speed improvement)
*Cpufreq: Add cpufreq_notify_utilization
V1.2
*Updated aroma
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Some new wakeclock blocked
*Update magisk
*Update source to G935FXXU2EREM
V1.1
*Add arch_power support
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Media kill process
*Improve wakeclock blocker power
*Reduced sleep time
V1.0
*Based on latest ELS source
*Sources ramdisk EREM
*Freq min GPU a 112MHz
*CPU UC for Big and Little Cluster
*GPU OC and UC 806mhz and 112mhz
*Voltage controll and CPU Undervolt
*AIK Kitchen 2.9
*-O3 Optimizations
*Many Performance and Battery optimizations
*TCP Congestion many options Westwood as default
*Cpufreq: cache tunables for ondemand and conservative governors
*Many Governorns to choose
*Schedulers many to choose cfq by default
*Mod Fake Knox 0
*Busybox 1.27.2
*Magisk 16.2 & Manager 5.9.1
*Disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
*SELinux Permissive
*LZ4 compression and support
*Init.d support
*Sensorhub wakelock: reduced to 50%
*Scripts: Remove DIRTY status from Kernel
*IO Schedulers: noop, deadline, cfq, zen
*CPU Governors: impulse, conservative, ondemand, interactive, performance
*Reduced wifi wakelocks
*Boeffla wakelocks blocker
*Keep 3cores of cluster1 off during stand-by
*GPU Voltage & settings
*Some defconfig optimization
*Battery settings
*Drivers: Add state notifier driver
*Binder: set binder_debug_mask=0 to suppress logging
*Autoreset of Secure Storage
*Enabled hidden tcp-algorithm
*Crc configurable and disabled by default
*Max77854: Fade Led
*CIFS and NTFS support
*SafetyNet: GREEN
DOWNLOAD:
TW: https://www.androidfilehost.com/?fid=11410963190603842350
AOSP (not up to date): https://www.androidfilehost.com/?fid=1322778262903996316
MOD EDIT: Don't quote the entire OP
Inviato dal mio SM-N950F utilizzando Tapatalk
Many thanks bro awesome work best are yet to come 5 stars from me
Thanx mate, downloading....
Hi i dont see wakelocks blocker its disable by default?
THX mate. On time no Problems. :good: Tomorrow i can tell more.
servus
Sent from my S7 Edge using XDA Labs
Héhé ! A new challenger ! Great ! Look awesome ! Will give a **** and report ... Thanks for your time on this hardware
Sent from my [device_name] using XDA-Developers Legacy app
Grate kernel but some problem this kernel but system many time boot. Please fix.
Which governor is better for battery life?
Randhir Kumar Yadav said:
Grate kernel but some problem this kernel but system many time boot. Please fix.
Click to expand...
Click to collapse
Do u touched something in mtweaks? Anyway send me last_ksmg
ako9 said:
Which governor is better for battery life?
Click to expand...
Click to collapse
Keep interactive
I am not select mtweks.
---------- Post added at 07:19 PM ---------- Previous post was at 07:09 PM ----------
francitato02 said:
Do u touched something in mtweaks? Anyway send me last_ksmg
Click to expand...
Click to collapse
No sar.i install this kernal for sac23 rom for s7 edge. I do not select Mtweks.
Thank you dev for your work. Can anyone tell me if still persist the Standby Cell battery drain with this Kernel? I don't update to Oreo my S7 edge, because all rom that I've tryed had the battery drains for standby cell ... but I hope with this kernel the situation can change. Thank again.
Thanks bud ?? giving it a try now
Tx so much for keeping our device alive
FD?
Best kernel now! Starting 1 cycle and i see batery life will be nice
Dual sim supported?
Great Kernel. Batterydrain ist less. Best Kernel on time for O :good:
Sent from my S7 Edge using XDA Labs