lower sound in reverse - Android Auto General

Hi guys,
I have a MTCD KGL unit, using a current stock ROM and MCU. Is there any way to lower the beeping sound in reverse? After installing the unit two things happened: 1) the sound for the back park distance sensor is very loud and 2) (even more annoying) the beeping continues for about 2-4 seconds after shifting into first gear. The car didn't do that before...
Any ideas? Thanks in advance

Related

Earpiece and Speakerphone super low after using bluetooth handsfree.

Hi everybody. I have the t mobile moto x 32gb on ATT. Works great ..the best phone no questions. I have an older car with aftermarket JVC unit with bluetooth capabilities inluding A2DP(which works great by the way) but the microphone of the JVC is not good so I don't use it for phone calls. I had that issue before where after the phone being connected to the car and disconnected (when I leave the car) the sound is super low it shows max but it is not(the moto x has great crisp and loud sound both on the earpiece and the speaker), so I have to restart the phone and this will fix my issue..but since I am not using it much I was ok with it...Now I have a 2010 Prius with blueetooth handsfree calling but no A2DP(that is ok with me I can use the AUX). The microphone on the Prius is great people are saying they hear me great and so do I. But now I am facing that issue again..
Is anyone familiar with that ? It is really annoying that I leave the car where I was in a conversation with great sound I lock my car and walk on a busy street and cant here what people are saying no matter if I am using the speakerphone or the earpiece..I have to tell them that will call them back in a minute after I restart my phone.
PLEASE HELP !
THANKS
Anything ?
Try persist+ from play?
Bluetooth volumes have been haunted ever since 4.4. Hell... plugging in the charger when I am on my vehicle's bluetooth changes the volume.
Hoping this finally get this fixed in 4.4.3, but until then, I have found a number of tricks.
1.) There is a sweet spot on the volume scale (around 70%) that is best to leave it at.
2.) I haven't had to restart my phone... usually just cycling BT off and on again restores original volume. Sometimes even starting/stopping media playback fixes it.
I can confirm to have the same problem. Hope it'll be solved in next updates.

[Q] Nexus 6 Audio Questions....

I just recently bought a Nexus 6, and not to long after I bought it my phones volume started to get very low. When I was on a phone call and switched to speaker, the phone starts the audio off as low, but then gets higher after a few seconds. Now when I listen to music or watch netflix, the audik starts off high at full volume, but then goes very low as if the phone had a Automatic Leveler. Is there anyone way to fix this ?
cjegan2008 said:
I just recently bought a Nexus 6, and not to long after I bought it my phones volume started to get very low. When I was on a phone call and switched to speaker, the phone starts the audio off as low, but then gets higher after a few seconds. Now when I listen to music or watch netflix, the audik starts off high at full volume, but then goes very low as if the phone had a Automatic Leveler. Is there anyone way to fix this ?
Click to expand...
Click to collapse
you are on stock? i didnt experience it on stock, but did on aosp. on aosp its a bug, that was fixed by a few developers.
Im pretty shocked by the nexus 6 speakers.
1. Speaker phone only works on the top speaker.
2. Anything from the lowest volume till about 2/3rds is nicley scaled then it just jumps in loudness in the last 3 to 4 clicks.
3. The stock sound is shocking bad ! Sounds like they forgot to balance bass and treble.
4. My headphone jace only seems to work with some jacks, an aux lead refuses to work in all 3 of my work vans and my old HTC headsets but works with iphone headsets and some of my aony headsets ( these all worked in my N5 )
5. Where the freekin' EQ ! Really google cant make a EQ letalone a good camera app !!!!
I am on stock. No root, no unlocked bootloader.
The funny thing is, when in place my hand over the front camera lens, and curved around the front, the volume goes back up as if there was a auto level function. If I take my hand off of that speaker, it goes back down because I am in a quite room. Something's not right with that..
I'm not rooted and I have similar issues. When I get phone calls or texts the volume starts out really low then gets high and I can't stand it. Seems to have just started doing this. Same thing when I'm talking to someone, I get a call, I answer it and I can barely hear them then 1 or 2 seconds later it's fine. Driving me crazy. Would love to get this fixed.

[Q] speaker feedback

Hi.
Can anybody tell me why I get feedback through my car speakers when using spotify? I have an older car, so use a wired cassette tape unit which I plug into phone jack. I have tried three different cassettes and four or five phone, and all perfect. It's only the z3 that give awfully background noise, making it unusable. It does it on day nave programs to. Any ideas please? Thankyou, Andy

Static Noise with joying 5.1.1 double din vw radio

Hi,
I recently bought a Joying Radio for a VW, it is a 8" touch screen and so far seems to work, I only have a really annoying problem with the noise. When I am not playing any music, the speakers emit a static noise, the volume of the noise never changes even if I turn up the radio. Since I am not always listening to music, I would still like to fix the problem. I read and the Sticky thread something about ground loop noise, but could never find an explanation to it. Maybe someone of you can help me
Also my weather app doesn't seem to work, if someone has any ideas
Thanks in advance, if you need any other information for solving this problem, let me know
How loud is it?
A very low static sound is common on these units. I have it both of mine. As you noted, thankfully the volume of the static does not increase with the volume so I really don't notice it when music is playing.
kaitzo said:
I only have a really annoying problem with the noise. When I am not playing any music, the speakers emit a static noise
Click to expand...
Click to collapse
You can try:
- linking the metal case of the unit to ground wire;
- shielding harness wires, as better you can
popeye70 said:
You can try:
- linking the metal case of the unit to ground wire;
- shielding harness wires, as better you can
Click to expand...
Click to collapse
The noise is not that loud, you only hear it if you are not driving and have nothing playing.
Is the ground wire already included in the VW cabling so that I have to pull it out of the harness or do I have to run a cable myself?
As for shielding I assume I can just take some electrical tape or is there anything else recommended?
Thanks in advance!
Hi kaitzo,
take a look at this thread of carjoying forum http://forum.carjoying.com/thread-24.html there is a link "solutions for radio bad reception" that can help for your problem too...
- radio1 subfolder has pictures about shielding wires
- radio2 subfolder has pictures about linking the iron case to GND
popeye70 said:
Hi kaitzo,
take a look at this thread of carjoying forum there is a link "solutions for radio bad reception" that can help for your problem too...
- radio1 subfolder has pictures about shielding wires
- radio2 subfolder has pictures about linking the iron case to GND
Click to expand...
Click to collapse
Hey, thanks for the reply, I already noticed that when I pull out the radio cable the noise is gone, so I am gonne give shielding it a try If that doesn't work, I will try connecting the ground wire.
I'll let you know if it helped solving the problem
kaitzo said:
Hey, thanks for the reply, I already noticed that when I pull out the radio cable the noise is gone, so I am gonne give shielding it a try If that doesn't work, I will try connecting the ground wire.
I'll let you know if it helped solving the problem
Click to expand...
Click to collapse
so I dont care about AM/FM radio. are you saying if you just left the AM/FM radio unplugged you would have no noise at all?
CadillacMike said:
so I dont care about AM/FM radio. are you saying if you just left the AM/FM radio unplugged you would have no noise at all?
Click to expand...
Click to collapse
Yes, leaving the antenna unplugged solved the problem for me, since I will be listening to Spotify most of the time anyway it might be a solution. Nevertheless, I will try to fix it even with the Antenna plugged in. Trying the ground method next, as shielding didn't help. I also found that the VW connector and the antenna connector which was included with the car not join each other all the way, so it is always a bit loose, but even with force I can't completely join them. I will let you know if I succeed.
And??
And after all you find a solution??? I’m with same issue
Having Same Issue
Hello there,
Sorry to revive this thread a few months late, but I am having the same issue and wanted to see if anyone had any ideas to fix it. I installed a Ownice C500+ radio head unit into a 2015 Nissan Murano. Everything functions perfectly and works great - expect for one thing. Whenever the volume is on, there is a very faint staticky sound in the background. It never changes tones or volume. It just always stays at the same pitch and doesn't go away. Aside from turning the sound all the way off, the only time it doesn't do this is when I switch to the radio - then the hissing disappears and all is perfect again. But if I am playing music via USB/AUX/Bluetooth, etc, (or if I just have the volume on with nothing playing) the hissing noise is always there. It is faint and hardly audible, so during driving it is no problem. But if, for example, I am listening to a soft song while stopped at a red light - then I can hear it and it is annoying.
I have tried to change the amplifier gain in the head unit because I figured that is what is causing the noise. However, it does not seem possible in the Ownice unit. The sound equalizer does not have "gain" as an option to change, I checked into Advanced Settings as well, also tried engineer mode on Android unit, plus downloaded some equalizer apps but nothing has fixed it.
Any idea on what is causing this and what I can do to fix it? Any help or suggestions would be greatly appreciated Thank you
Same here
TiberiusGavier said:
Hello there,
Sorry to revive this thread a few months late, but I am having the same issue and wanted to see if anyone had any ideas to fix it. I installed a Ownice C500+ radio head unit into a 2015 Nissan Murano. Everything functions perfectly and works great - expect for one thing. Whenever the volume is on, there is a very faint staticky sound in the background. It never changes tones or volume. It just always stays at the same pitch and doesn't go away. Aside from turning the sound all the way off, the only time it doesn't do this is when I switch to the radio - then the hissing disappears and all is perfect again. But if I am playing music via USB/AUX/Bluetooth, etc, (or if I just have the volume on with nothing playing) the hissing noise is always there. It is faint and hardly audible, so during driving it is no problem. But if, for example, I am listening to a soft song while stopped at a red light - then I can hear it and it is annoying.
I have tried to change the amplifier gain in the head unit because I figured that is what is causing the noise. However, it does not seem possible in the Ownice unit. The sound equalizer does not have "gain" as an option to change, I checked into Advanced Settings as well, also tried engineer mode on Android unit, plus downloaded some equalizer apps but nothing has fixed it.
Any idea on what is causing this and what I can do to fix it? Any help or suggestions would be greatly appreciated Thank you
Click to expand...
Click to collapse
Same issue here with a new Asottu Infidini Allwinner T8, with extra DSP chip included. Except that my hissing sound goes up with the volume. I will contact seller.
lorrys said:
Same issue here with a new Asottu Infidini Allwinner T8, with extra DSP chip included. Except that my hissing sound goes up with the volume. I will contact seller.
Click to expand...
Click to collapse
Sounds good, I will keep working on it as well - let me know if they happen to find out what is causing it
Same issue here : (
Solved!
Asottu provided an android 7.1.2 update weeks ago. The issue is gone now. It was not an MCU update. Just Android.
@lorrys
I'm glad that fixed it for your system - I will look for an update to the Ownice unit but I don't believe they have one to go to Android 7.1.2
traxformania said:
Same issue here : (
Click to expand...
Click to collapse
I did find a solution that essentially makes the problem almost disappear. If you have an Ownice C500+ unit, go into Settings, enter 1260 as password to go to hidden settings, enter the volume area, make all of those values as low as they can possibly go. Some of those will be in the negative. When you reboot the system, the sound is essentially inaudible and that solves the problem.
lorrys said:
Asottu provided an android 7.1.2 update weeks ago. The issue is gone now. It was not an MCU update. Just Android.
Click to expand...
Click to collapse
I have the same issue but with Toyota version of the unit. Can you share the update?
i think the issue is the am/fm antenna, get a noise filter antenna adapter, might solve the issue
hi, I have an eonon ga8161, it would be hct px3 7.1 if I'm not mistaken.
I also have the background volume problem, but it is almost inaudible.
the most obvious problem is a rustling metallic type rustling noise, which is heard when there is processing from a USB device, both pendrive and USB dashcam ... someone has had this problem, because it is very annoying

XTRONS hissing/buzzing after Alpine upgrade Audi TT Mk2

Hi all,
I recently swapped the original Audi TT concert Radio for an XTRONS (the one that looks like an RNSE Reference Number is IB79ATTRP). Now the Unit works very well, especially after the modded Amp was installed. Yesterday I swapped the original Speakers and Amp with an original Audi Sound Plus System (by ALPINE). The sound quality boost is immense, though it is creating a hissing sound that is constant all the time. It wasn't there prior and when I turn the unit off it is gone, so I guess it is a problem with the XTRONS. When I crank the music up it is not really noticeable, but when the music is low it is very annoying.
I don't really want to drive around blasting music 24/7
Any help is much appreciated!
What did reseller suggest when contacted for support. What has been tried from the other threads in MTCD section (if your unit is an MTCD)
Teh crickets.
AndroidNoob13 said:
Hi all,
I recently swapped the original Audi TT concert Radio for an XTRONS (the one that looks like an RNSE Reference Number is IB79ATTRP). Now the Unit works very well, especially after the modded Amp was installed. Yesterday I swapped the original Speakers and Amp with an original Audi Sound Plus System (by ALPINE). The sound quality boost is immense, though it is creating a hissing sound that is constant all the time. It wasn't there prior and when I turn the unit off it is gone, so I guess it is a problem with the XTRONS. When I crank the music up it is not really noticeable, but when the music is low it is very annoying.
I don't really want to drive around blasting music 24/7
Any help is much appreciated!
Click to expand...
Click to collapse
I wonder if you were able to fix the buzzing noise. I installed the xtrons 10in and I have kinda the same issue. When I turn on the headlights it lowers the buzzing noise down significantly. I thought it might have been my JBL amp so I tried lowering it but its still there just lower.

Categories

Resources