Database Develop

[GUIDE] Marshmallow Root Guide for ZE500KL

ATTENTION!
You MUST read all the guide BEFORE doing it, if you do it without reading all of it first you may ends up bricking your phone!
Prerequisites:
Asus ZE500KL (may work on ZE500KG, but haven't tested, do it on your own risk) on Marshmallow, NOT LOLLIPOP!
Also, it must have fully booted AT LEAST one time, otherwise, you'll soft-brick it.
If your phone is not on Marshmallow, you can use THIS guide instead​Download and put the unlocker zip file and the SuperSu zip file in the phone
How To:
1 - Install adb and fastboot driver (follow THIS guide)
Now you can connect the phone to your computer​2 - Reboot in fastboot mode with one of the following method:
a -Volume Up while booting up​b -With adb, after enabling USB debugging in developer settings, using:
Code:
adb reboot bootloader
Now that you are in bootloader, you have to boot in TWRP,
download THIS recovery (is the twrp one) and boot in to it, using this command:
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
Code:
fastboot boot TWRP-x-x-x-x.img
(Obviusly the recovery name must be the one you downloaded)
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
It should automaticaly enter in recovery.
Now you MUST flash FIRST ZE500KL_BootloaderUnlock.zip, otherwise you'll brick your phone
Btw, the recovery will mount your phone's memory, so you can put now the files in the phone, if you forgot to do it before​
AFTER you installed the unlocker zip, you can install the SuperSu zip
When the install is complete, clear the cache and reboot your phone, now you can enjoy your root!
Downloads:
Latest @MiauLightouch TWRP - 3.0.0.2 Mirror
Latest SuperSu zip - 2.65 Mirror
Bootloader Unlocker (from @MiauLightouch original post) - Mirror
Credits:
@MiauLightouch for pretty much everything
@LuK1337 , @luca020400 and everyone on #titandev for being awesome

So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?

MuzgontarAco said:
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
Click to expand...
Click to collapse
I would recommend Z00L/T, you will get cm13, official unlock at least.

You Say " May Work On ZE500KG" Is ze500kg already receive Marshmallow Update?

MiauLightouch said:
I would recommend Z00L/T, you will get cm13, official unlock at least.
Click to expand...
Click to collapse
thanks for the advice but my choices are poor with about 5 phones in this price range with this one looking waay better.. getting it via contract so yeah..

How to install supersu zip? Tia.

Working! Have you tried to flash Viper4Android? On lollipop this will break Call recording and FM Radio, maybe this will not be a problem on MM?

Seanjhon027 said:
How to install supersu zip? Tia.
Click to expand...
Click to collapse
Inside TWRP there is a big "Install" button, press it and select the zip

what is the meaning of booted

mohamedelkholy said:
what is the meaning of booted
Click to expand...
Click to collapse
context?

until you saw the lock screen, that's what "booted".

stuck waiting for device
C:\Users\Clynt\Desktop\Android M>adb reboot bootloader
C:\Users\Clynt\Desktop\Android M>fastboot boot twrp.img
< waiting for device >
Ok I don't know where I get wrong but I got this error.
Img file name is ok because I renamed it.
Drivers were installed already.
Developers mode is enabled already.
Windows 7 64bit
Tried rooting this using lollipop and everything went well.
thanks!
UPDATE: i got it. it has something to do with the drivers.

Without opening the bootloader.
Notice. I have not tried it.
http://www.asus-zenfone.com/2016/05/how-to-root-asus-zenfone-2-laser-ze50kl-marshmallow.html?m=1

thanl you man i have rooted my zenfone 2 laser

Thanks very much for this guide and your work.

Can I install the new update v13.10.7.1 when I opened bootloader.

The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia

thanks
thks TS
now my phone its rooted

Muminek111 said:
Without opening the bootloader.
Notice. I have not tried it.
No... when trace a perequisite link Given..
you really need to unlock bootloader first
wulfe13 said:
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
Click to expand...
Click to collapse
i think isnt permanent, this step is needed to boot into twrp then flashing a unlockBL..
to make permanent.. the command must "fastboot flash recovery twrp_X.X.X.X.img"
but make sure to unlock bootloader first...
CMIIW
Click to expand...
Click to collapse

Is it me or everytime I reboot the device after rooted, it's going back to unrooted?
Root is a success tho, great job, OP!
Edit: okay, not every reboot, but after several reboots, then it went back unrooted

ROOT HTC U PLay

This is a short guide on rooting for thous who are new to this stuff
Steps:
1: download adb platform tools from here
2: Unlock bootloader. follow the guide on htcdev.
make sure you have htc drivers installed so that you can use oem command in fastboot mode for unlocking
3: Download TWRP
4: Download SuperSU and copy it to your phone's internal memory
5: Enable USB debugging and type "adb reboot-bootloader" from pc
6: Type: "fastboot boot twrp-3.1.1-0-alpine.img"
make sure you have twrp image in same folder as adb.
7: Wait for sometime you will boot into twrp recovery from there select install and select the SuperSU zip file
8: reboot and check for root
Links:
http://www.supersu.com/download
https://developer.android.com/studio/releases/platform-tools.html

has anybody tried this? I'm a bit scared to be the first one

javnostra said:
has anybody tried this? I'm a bit scared to be the first one
Click to expand...
Click to collapse
You should make sure you get a pristine backup at hand, or a RUU appropriate to your device. Otherwise you'll never be able toreturn to a full stock system.
On the U11 it is possible to boot TWRP from fastboot, without flashing it and thus without touching stock recovery. That way I've been able to flash Magisk what's coming with MagiskSU and the possibility to use some Modules. And all without altering the system or replacing stock recovery in the first place.
Sent from my HTC U11 using XDA Labs

javnostra said:
has anybody tried this? I'm a bit scared to be the first one
Click to expand...
Click to collapse
Yes its working without flaws, i have tested it myself. also your not installing recovery this time your booting directly

dranzer006 said:
Yes its working without flaws, i have tested it myself. also your not installing recovery this time your booting directly
Click to expand...
Click to collapse
Thanks, I will try it then.

javnostra said:
Thanks, I will try it then.
Click to expand...
Click to collapse
It works. Thanks a lot. My phone is rooted

5m4r7ph0n36uru said:
You should make sure you get a pristine backup at hand, or a RUU appropriate to your device. Otherwise you'll never be able toreturn to a full stock system.
Click to expand...
Click to collapse
for anyone asking themselves how to backup
https://forum.xda-developers.com/showpost.php?p=53767160&postcount=2
or https://forum.xda-developers.com/showpost.php?p=53770286&postcount=4
or is there a different way these days? @5m4r7ph0n36uru
BerndM14 said:
Connect phone to PC, boot into bootloader mode and type fastboot boot name_of_recovery.img that'll just boot the custom recovery as opposed to flashing it, that way you can make a nandroid backup of all partitions including stock recovery.
Click to expand...
Click to collapse
an0ther said:
The guys method of using recovery to backup recovery will only work on Philz… Not twrp as it does not always backup stock recovery properly. The proper way to backup stock recovery is..
1. Root your phone, which can be done by towel root or by just booting a recovery like he said,
fastboot boot twrporwhatever.img, then flash supersu
2. Boot phone that has stock recovery
3. adb shell
4. su "watch your phone to grant root adb access if you haven't ever done it"
5. dd if=/dev/block/mmcblk0p43 of=/sdcard/recovery.img
6. This will put flashable recovery.img on your internal sd card. Copy this and save it for later
7. "fastboot flash recovery recovery.img" will get you back to stock recovery, "fastboot flash recovery twrporwhatever.img" to flash custom recovery.
Click to expand...
Click to collapse

If possible and a TWRP recovery is available one should boot to bootloader and try if the command fastboot boot name_of_twrp.img works. Make sure to NOT grant r/w at first boot and leave it ro. Now you can perform a backup of stock recovery, boot and system image (not system partition!) to obtain a pristine backup.
All else will alter system partitions md5 and the backup won't be pristine any longer. Due to block based OTA policy introduced by Google you won't be able to OTA without a pristine system image.
Sent from my HTC U11 using XDA Labs

Bro My Boot Loader is Locked.
Htc dev Not Relised Htc u play Boot loader.

I think these are the instructions. You need to register to access the link
https://www.htcdev.com/bootloader/unlock-instructions
or use my login:
lizba
ALJSDBf234LJABSf
edit: dont use my login. you have to register. you'll get a mail with another page plus a .bin file
https://www.htcdev.com/bootloader/unlock-instructions/page-4/

I have two questions.
1. If I fastboot to TWPR will it stay (flash for good) or after disconnecting my phone it will be gone ?
2. Can I flash Magisk instead of SuperSU ?

Code:
fastboot oem get_identifier_token
FAILED (remote: unknown command)
how i can solve it?

ex71 said:
Code:
fastboot oem get_identifier_token
FAILED (remote: unknown command)
how i can solve it?
Click to expand...
Click to collapse
need enable "OEM unlock" in developers menu, reboot into bootloader and select "download mode". Next steps from original guide.

ex71 said:
need enable "OEM unlock" in developers menu, reboot into bootloader and select "download mode". Next steps from original guide.
Click to expand...
Click to collapse
But in download mode there is no fastboot active ?! Until you installed the correct drivers

no "fastboot" (like a "one s", etc) on this phone. no fastboot usb
"fastboot" command work in "bootloader menu" and "download mode"
fastboot oem only in download mode

Hello. Please explain what I am doing wrong. I will download what is in points. I download this adb something, but it does not work. Nothing starts. Does not communicate with the phone. OCB. Could anyone write this guide so that he could understand and act?

The classic way to install TWRP、Magisk and more

Installing magisk_patched is unnecessary.
download ADB here
download TWRP here
download magisk here
first ,we must unlock bootloader.
Settings->About phone->tap at Build number 7 times.Now,we unlocked the "Developer options". open it and turn the OEM unlocking on.
Reboot to bootloader&Run this command on your computer with ADB:
fastboot oem unlock
Use Volume key to select&Power key to enter.
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
reboot to bootloder&connect us phone to computer.
Run this command on your computer with ADB:
fastboot boot twrp-3.3.1-2-guacamole.img
then,the phone will reboot to TWRP,but this not end for install, it will be broke after you reboot again, we must install the twrp-installer-3.3.1-2-guacamole.zip In this TWRP.
after this step we got the TWRP installed.
then use TWRP to install the last release magisk.
now we got magisk installed & SafetyNet-pass.
you can install xposed or not .
thanks all&enjoy.

This guide completely misses unlocking the bootloader, changing the option in developer settings to OEM unlock is NOT unlocking the bootloader. Please amend your guide to show the missing steps:
Running the following in the bootloader is how to correctly unlock the bootloader :
fastboot devices
Make sure your device is reported correctly
fastboot oem unlock
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)

djsubterrain said:
This guide completely misses unlocking the bootloader, changing the option in developer settings to OEM unlock is NOT unlocking the bootloader. Please amend your guide to show the missing steps:
Running the following in the bootloader is how to correctly unlock the bootloader :
fastboot devices
Make sure your device is reported correctly
fastboot oem unlock
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
Click to expand...
Click to collapse
reedit now，thx

May want to fix Ture to True and after flashing the TWRP-installer reboot back to TWRP to make sure it sticks(Recovery Installed) before you flash Magisk zip.

Don't forget to flash to both slots to get everything to stick.

Its pretty hard to fail safetynet. I've flashed many different things on this phone and never failed it.

JeSUS! FINALLY! After trying out that other method of rooting, installing twrp and magisk (by using patched images) THIS worked. I updated to 9.5.6 (back to stock, but still bootloader unlocked) and then followed this guide to rooting this phone. Finally! Whew! Wish I had done this from the start. I'm able to go get some sleep now! Thanks OP!

So many great minds here! Best community for a specified device that ive ever had the pleasure of being a part of. Can't wait to try this when my unlock token comes in ?

roaduardo said:
JeSUS! FINALLY! After trying out that other method of rooting, installing twrp and magisk (by using patched images) THIS worked. I updated to 9.5.6 (back to stock, but still bootloader unlocked) and then followed this guide to rooting this phone. Finally! Whew! Wish I had done this from the start. I'm able to go get some sleep now! Thanks OP!
Click to expand...
Click to collapse
This is the classic way to get root,happy to help you

Purest said:
Don't forget to flash to both slots to get everything to stick.
Click to expand...
Click to collapse
I am waiting for the gsi of resurrection remix, curing twrp now is unnecessary

just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................img
install twrp..............zip
install magisk
reboot?

equlizer said:
just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................zip
install twrp..............zip
install magisk
reboot?
Click to expand...
Click to collapse
Did u try it ? Im waiting on confirmation as well

This is the method that I have been doing all along and it works everytime without any issues.

equlizer said:
just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................zip
install twrp..............zip
install magisk
reboot?
Click to expand...
Click to collapse
Should be fastboot boot TWRP.img then install either twrp.zip if there's an installer or twrp.img if not

JTruj1ll0923 said:
Should be fastboot boot TWRP.img then install either twrp.zip if there's an installer or twrp.img if not
Click to expand...
Click to collapse
fixed my post so this method i dont have to worry about slots a and b right? Then what about when an update comes. Do i flash the full update or can i do an OTA? If i flash a full .zip will i loose my data? I'm coming from a pixel 2 xl.

Can someone please clarify. If I do this on slot A, how do I change over to Slot B to do it?

BlueMemory said:
Installing magisk_patched is unnecessary.
download ADB here
download TWRP here
download magisk here
first ,we must unlock bootloader.
Settings->About phone->tap at Build number 7 times.Now,we unlocked the "Developer options". open it and turn the OEM unlocking on.
Reboot to bootloader&Run this command on your computer with ADB:
fastboot oem unlock
Use Volume key to select&Power key to enter.
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
reboot to bootloder&connect us phone to computer.
Run this command on your computer with ADB:
fastboot boot twrp-3.3.1-2-guacamole.img
then,the phone will reboot to TWRP,but this not end for install, it will be broke after you reboot again, we must install the twrp-installer-3.3.1-2-guacamole.zip In this TWRP.
after this step we got the TWRP installed.
then use TWRP to install the last release magisk.
now we got magisk installed & SafetyNet-pass.
you can install xposed or not .
thanks all&enjoy.
Click to expand...
Click to collapse
Flashing twrp Breaks wifi.

ashokmor007 said:
Flashing twrp Breaks wifi.
Click to expand...
Click to collapse
Does it really? I just ordered a 7 Pro yesterday so I don't have mine yet.

Hi everyone its not working for me i wonder why i am on gm1915

H4X0R46 said:
Does it really? I just ordered a 7 Pro yesterday so I don't have mine yet.
Click to expand...
Click to collapse
No it doesn't. I flashed the twrp installer zip with magisk and my wifi is working just fine.
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
schmeggy929 said:
May want to fix Ture to True and after flashing the TWRP-installer reboot back to TWRP to make sure it sticks(Recovery Installed) before you flash Magisk zip.
Click to expand...
Click to collapse
schmeggy what up. I see you're still rockin the Bad BoyZ siggy

Question???

I was wondering is there any RP2 ROMS like Lineage os or other ROMS? Or not yet or it's not possible to make for this kind of phone or maybe i didn't search more to know what's going on??

No specific ROM for RP2 but you can install GSI ROM after unlocking your bootloader.
Peace

chris5s said:
No specific ROM for RP2 but you can install GSI ROM after unlocking your bootloader.
Peace
Click to expand...
Click to collapse
Okay Thanks for the info, But i'm trying to root my phone on mr2 i can't find any thread that shows how to root mr2 with steps ??

I'm on MR 2 as well. Follow these steps :-
Unlock bootloader.
Flash Arter's kernel from bootloader mode. Then boot into TWRP recovery (comes with Arters kernel) and from there flash latest Magisk zip to get root.
Peace

chris5s said:
I'm on MR 2 as well. Follow these steps :-
Unlock bootloader.
Flash Arter's kernel from bootloader mode. Then boot into TWRP recovery (comes with Arters kernel) and from there flash latest Magisk zip to get root.
Peace
Click to expand...
Click to collapse
Doesn't work on MR2 December realeas i tried and it bricked my phone any other way?

AssyrianHero said:
Doesn't work on MR2 December realeas i tried and it bricked my phone any other way?
Click to expand...
Click to collapse
Yes it does you have to flash the global version NOT the AT&T version.
https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3123-user-full.zip

JDBarlow said:
Yes it does you have to flash the global version NOT the AT&T version.
https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3123-user-full.zip
Click to expand...
Click to collapse
Yes this is what i'm flashing "aura-p-release-3123-user-full" its global version and i think i'm doing something wrong can you explain step by step instructions? cause i'm new to RP2 and i'm used to old simple root method

Have you tried flashing Arter's kernel then reboot into system before trying to root?
If that works then maybe it's the rooting that's bricking the phone?
Which version of Magisk are you trying to flash?

chris5s said:
Have you tried flashing Arter's kernel then reboot into system before trying to root?
If that works then maybe it's the rooting that's bricking the phone?
Which version of Magisk are you trying to flash?
Click to expand...
Click to collapse
The problem there is no steps that shows what to do I'm just using my own steps, and I'm not using any Magisk I'm just trying to flash Arter's kernel.

Maybe explain what steps you are doing and what errors you are getting then?
Can you put the phone into bootloader mode? Is it unlocked? Do you have adb and do you know how to use it?
Peace.

AssyrianHero said:
Yes this is what i'm flashing "aura-p-release-3123-user-full" its global version and i think i'm doing something wrong can you explain step by step instructions? cause i'm new to RP2 and i'm used to old simple root method
Click to expand...
Click to collapse
Honestly it's easier to root phones today than it ever has especially the RP2.
If you are truly unlocked this should only take you minutes to do.
First things first. Open a terminal where you have ADB / FASTBOOT installed or if you setup the attributes properly just open a terminal.
Type adb devices and it should give you your serial number of your phone. If not adb isn't installed properly.
If so, type adb reboot bootloader and phone will boot to bootloader.
Type fastboot devices and again it should give you the phones ID. If not fastboot isn't installed properly.
If so, type fastboot flash boot and the name of your arter97 file.img this will also install TWRP.
After installation from bootloader menu scroll down to reboot recovery and it should boot to TWRP.
Click cancel then swipe to allow modifications. In TWRP menu select INSTALL then choose where you've saved the magisk 20.3 file on your SD or internal drive.
After installation reboot system then install magisk manager if not already installed. At this point you're rooted. Have a great weekend!!
Good luck! :good:

Make sure you have unlocked your phone, suggest following razer official instruction.(new xda user cant post outside link, search it)
1.Unlock the Bootloader 2.Unlock the Bootloader Critical Partitions 3.Flash official System Image
And please note unlock will erases all user data on the Phone!
After unlocked your phone you can flash arter97 kernel or f(x)THaxxorX TrinityKernel. Both of them contain TWRP, install Magisk Manager and flash Magisk in TWRP. Get rooted.

chris5s said:
Maybe explain what steps you are doing and what errors you are getting then?
Can you put the phone into bootloader mode? Is it unlocked? Do you have adb and do you know how to use it?
Peace.
Click to expand...
Click to collapse
The bootloader is unlocked i do have adb and i i know how to use it I've been rooting all my phones HTC M9 Samsung S7-8-9 and OnePlus 7 I've rooted too many phones but this one is little bit different than others i tried my own steps like i used to do:
I reboot my phone into bootloader and type fastboot devices and it gives me the Serial number and i then i type fastboot boot boot.img i don't know if this command works with this phone it actually worked with other phones this one not..

finixs said:
Make sure you have unlocked your phone, suggest following razer official instruction.(new xda user cant post outside link, search it)
1.Unlock the Bootloader 2.Unlock the Bootloader Critical Partitions 3.Flash official System Image
And please note unlock will erases all user data on the Phone!
After unlocked your phone you can flash arter97 kernel or f(x)THaxxorX TrinityKernel. Both of them contain TWRP, install Magisk Manager and flash Magisk in TWRP. Get rooted.
Click to expand...
Click to collapse
How to unlock the Bootloader Critical Partitions? I think i missed this step i have the bootloader unlocked..

Look on the Razer website for the specific instructions to unlock bootloader/critical.
The fastboot command to flash a boot img is
fastboot flash boot boot.img
Peace

AssyrianHero said:
How to unlock the Bootloader Critical Partitions? I think i missed this step i have the bootloader unlocked..
Click to expand...
Click to collapse
"fastboot flashing unlock" unlock bootloader
"fastboot flashing unlock_critical" unlock the bootloader critical partitions

Also, make sure you're using the Razer recommended USB cord and ADB/Fastboot.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Cables
When connecting your Razer Phone to a computer for any development, it is advised by Razer to not use the in-box USB Type-C to Type-C charging cable for flashing. The supplied cable is specifically engineered for fast power delivery, not for data transfer. Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
Click to expand...
Click to collapse
Upgrade your ADB/Fastboot here.

Question Relock Bootloader

Hi all,
After multiple issues with this phone, I finally opt out and pass to Pixel 7 Pro.
So, i would like to know how to relock bootloader avoiding the problems of bootloop.
I've uninstall Magisk with option "complete uninstall".
I saw it's better to flash stock image before relock bootloader but how ?
Simply by flashing boot.img on the two slot OR flashing full.zip generated by Oxygen Updater OR other method ?
Thanks a lot for your help !

fma388 said:
Hi all,
After multiple issues with this phone, I finally opt out and pass to Pixel 7 Pro.
So, i would like to know how to relock bootloader avoiding the problems of bootloop.
I've uninstall Magisk with option "complete uninstall".
I saw it's better to flash stock image before relock bootloader but how ?
Simply by flashing boot.img on the two slot OR flashing full.zip generated by Oxygen Updater OR other method ?
Thanks a lot for your help !
Click to expand...
Click to collapse
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.

zopostyle said:
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.
Click to expand...
Click to collapse
This phone was promising on paper but the user experience was much less so...
Thank you for the answer !!
For the full zip of Oxygen Updater, I flash it with "fastboot flash full.zip" or how? (I've never flashed a full zip )

fma388 said:
This phone was promising on paper but the user experience was much less so...
Thank you for the answer !!
For the full zip of Oxygen Updater, I flash it with "fastboot flash full.zip" or how? (I've never flashed a full zip )
Click to expand...
Click to collapse
You can use the Local installation system, from the update screen and it that does not support use the OPLocalUpgrade app that Oxygen Updater provides.

zopostyle said:
You can use the Local installation system, from the update screen and it that does not support use the OPLocalUpgrade app that Oxygen Updater provides.
Click to expand...
Click to collapse
Ok thanks !

zopostyle said:
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.
Click to expand...
Click to collapse
Dear sir, i'm using Ne2213_11_C.30 (Newest Rom). Can u give me the Instructions to relock the bootloader (step by step). I don't know how to flash the boot.img. Thank so much.

hoaianh1505 said:
Dear sir, i'm using Ne2213_11_C.30 (Newest Rom). Can u give me the Instructions to relock the bootloader (step by step). I don't know how to flash the boot.img. Thank so much.
Click to expand...
Click to collapse
If you're on the latest rom there is no need to relock the bootloader
But if you want to, download this https://gauss-componentotacostmanua...23/03/21/b6cfe6d4ec4f4cf7bcb316891f9f8db9.zip
It's the full NE2213 C30 zip file.
Than download https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Intall it on you phone, It will show a new app Local Upgrade, using this tool you will install the above zip file.
After the installation complete, it's recommended to full wipe your device.
Than using adb and fastboot that you can download from here https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
plug you device into your computer
reset it to fastboot mode (turn off, hold power, vol + and vol - until the device start than release power button, once the screen shows the options you can release all buttons and choose fastboot mode if its not there)
on the command prompt type:
Fastboot flashing lock
And that's it.

zopostyle said:
If you're on the latest rom there is no need to relock the bootloader
But if you want to, download this https://gauss-componentotacostmanua...23/03/21/b6cfe6d4ec4f4cf7bcb316891f9f8db9.zip
It's the full NE2213 C30 zip file.
Than download https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Intall it on you phone, It will show a new app Local Upgrade, using this tool you will install the above zip file.
After the installation complete, it's recommended to full wipe your device.
Than using adb and fastboot that you can download from here https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
plug you device into your computer
reset it to fastboot mode (turn off, hold power, vol + and vol - until the device start than release power button, once the screen shows the options you can release all buttons and choose fastboot mode if its not there)
on the command prompt type:
Fastboot flashing lock
And that's it.
Click to expand...
Click to collapse
Thank you so much. Your advice's no need to relock the bootloader, i just worry about the information security. Eg: Banking app can work normal?
After updated to oxygen 13, my phone appear the warning: "phone has been unlocked and cant be trusted ..." each time i boot my device. How can i turn off this warning?

hoaianh1505 said:
Thank you so much. Your advice's no need to relock the bootloader, i just worry about the information security. Eg: Banking app can work normal?
After updated to oxygen 13, my phone appear the warning: "phone has been unlocked and cant be trusted ..." each time i boot my device. How can i turn off this warning?
Click to expand...
Click to collapse
There is no reason to worry about that warning. As your bootloader is not locked the only breach is that a user can manually flash another firmware.
But as he will not have the device on hand there is no problem.
My advice is to not relock, many users bricked their devices doing that.
Also everything works just fine, so no need to relock.

zopostyle said:
There is no reason to worry about that warning. As your bootloader is not locked the only breach is that a user can manually flash another firmware.
But as he will not have the device on hand there is no problem.
My advice is to not relock, many users bricked their devices doing that.
Also everything works just fine, so no need to relock.
Click to expand...
Click to collapse
Thanks for your helpful advice.