Database Develop

[Q] nexus one , usb recovery problem

C:\Documents and Settings\SilenT>cd c:\android\tools
C:\android\tools>adb usb
error: device not found
C:\android\tools>adb devices
List of devices attached
debugg mode on/off ...same problem
and my recovery img dosent work when i enter the recovery mode Exclamation Point with android guy
os: win xpsp3 ... drivers unninstaled\instaled from everywhere ~X( still no luck sombody pls hlp !!

I am not sure yet on all your errors, but you do have debugging enabled on your phone?
---------- Post added at 03:16 AM ---------- Previous post was at 03:15 AM ----------
no need for two threads

You really need to give a bit more info. It looks like your PC isn't seeing your phone. This could be due to a number of reasons, including wrong driver, bad usb cable, phone not set up correctly (adbd not started), etc...
What exactly have you done? From what you've posted I've no idea if you phone is even hooked up with a cable...

OP, go into Device Manager on your PC with your N1 plugged into USB. Is there a yellow warning triangle with an exclamation point next to the entry for ADB Device/Nexus one?
On Windows 7 i've always had to install N1 drivers manually from a package i found here:
http://forum.xda-developers.com/showthread.php?t=613217

[Q] Help, htc one m7 device bricked, any way out?

Hello guys,
I have an htc one m7. I stupidly wiped system partition beforehand and downloaded an older ruu in order to get my htc one in a clean stock condition. Unfortunately, not only can I not boot up the system of the phone, I can't download anything in twrp (also tried cwm) because nothing mounts from the phone, including mtp. I still have the bootloader and recovery options .Here's what steps I tried:
fastboot rom pushing-FAIL
adb sideloading-worked to 100%, but then I get a status protocol error from twrp
adb pushing- did not help(don't know why, nothing shown in cmd)
drivers install sometimes but most of the time say not installed.
What I may try-
usb otg, but don't know if it will work if nothing mounts on my phone from twrp?
another computer.
I'm really worried that I may have converted my phone into an expensive paperweight. Is this a hard brick? How can I get out of this? Thanks so much!

supersega9 said:
adb pushing- did not help(don't know why, nothing shown in cmd)
Click to expand...
Click to collapse
Your command prompt will be unresponsive when using adb push. When it become responsive again, your file is pushed.
Code:
adb push your_rom.zip /sdcard
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
supersega9 said:
I can't download anything in twrp (also tried cwm) because nothing mounts from the phone, including mtp
Click to expand...
Click to collapse
You can not mount your phone like a storage device on your computer when it is booted in recovery. When you mount something in recovery, you mount it so the recovery can access it, not the computer. Use adb push, adb sideload or usb otg.
fastboot rom pushing-FAIL
Click to expand...
Click to collapse
Sure, you can't use fastboot to push a rom...
adb sideloading-worked to 100%, but then I get a status protocol error from twrp
Click to expand...
Click to collapse
Check usb cable, usb ports and make sure to use 2.0 usb directly on your computer (not using an external usb hub).
drivers install sometimes but most of the time say not installed.
Click to expand...
Click to collapse
Make sure your drivers are correctly installed (refer to the FAQ sticky thread)

alray said:
Your command prompt will be unresponsive when using adb push. When it become responsive again, your file is pushed.
Code:
adb push your_rom.zip /sdcard
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
You can not mount your phone like a storage device on your computer when it is booted in recovery. When you mount something in recovery, you mount it so the recovery can access it, not the computer. Use adb push, adb sideload or usb otg.
Sure, you can't use fastboot to push a rom...
Check usb cable, usb ports and make sure to use 2.0 usb directly on your computer (not using an external usb hub).
Make sure your drivers are correctly installed (refer to the FAQ sticky thread)
Click to expand...
Click to collapse
Hi Alray,
Thanks for the post! you were quite helpful. Ok, I successfully pushed a rom through adb and when I try to install it says cannot mount/data. What can I do now to fix this issue?

supersega9 said:
Hi Alray,
Thanks for the post! you were quite helpful. Ok, I successfully pushed a rom through adb and when I try to install it says cannot mount/data. What can I do now to fix this issue?
Click to expand...
Click to collapse
in twrp go to wipe and then format data. push the rom again and flash it.

Ok so how do a move my nandroid backup off my phone?

Just unlocked and rooted my phone a few days ago and I made a nadroid backup with TWRP. Of course, that has taken up most of my storage and defeats the logic of having a backup somewhere other than the device being backed up.
It's been a few years since I last had a phone I could root. My last one could be mounted as a USB drive and any files easily taken off the phone. I could push it up to dropbox but even on a wifi connection with cable broadband that will take half a day.(the backup is like 5gb)
Is there an app I can use to push the file via the USB or even wifi to my PC?

nlinecomputers said:
Just unlocked and rooted my phone a few days ago and I made a nadroid backup with TWRP. Of course, that has taken up most of my storage and defeats the logic of having a backup somewhere other than the device being backed up.
It's been a few years since I last had a phone I could root. My last one could be mounted as a USB drive and any files easily taken off the phone. I could push it up to dropbox but even on a wifi connection with cable broadband that will take half a day.(the backup is like 5gb)
Is there an app I can use to push the file via the USB or even wifi to my PC?
Click to expand...
Click to collapse
Easy. Connect to PC via USB. Go to the TWRP folder, drag off the backup inside.
You do know how to connect to PC via USB cable, right? All your folders will show up like a flash drive. Look for TWRP.
How big is your backup? Something is wrong if it takes up most of your storage. I keep one or two backups on my phone all the time. Usually just one, as that's all I really need. I make a backup almost daily. In TWRP settings, you can choose level of compression. More compression will make smaller size.

ChazzMatt said:
Easy. Connect to PC via USB, Go to the TWRP folder, drag it off.
How big is your backup? Something is wrong if it takes up most of your storage. I keep one or two backups on my phone all the time. Usually just one.
Click to expand...
Click to collapse
That folder is empty and isn't the same folder as on the phone itself. I can't see the actual directory.

nlinecomputers said:
That folder is empty and isn't the same folder as on the phone itself. I can't see the actual directory.
Click to expand...
Click to collapse
OK, let's take one step at a time.
You made the backup with TWRP, right?
What version of TWRP are you on?
in the PC view, you will see all your folders. Inside TWRP will be the backup file.

No, the droid turbo doesn't support USB mode. It only supports MTP or PTP modes. If you going to be condescending at least know the product.
Sorry typo: doesn't support

nlinecomputers said:
No, the droid turbo does support USB mode. It only supports MTP or PTP modes. If you going to be condescending at least know the product.
Click to expand...
Click to collapse
Does or doesn't? Make up your mind.
I know the product so it's not being condescending. If have TWRP installed you should see the folder.
If that's a limit of Verizon stock ROM, then that's your fault.
You're saying Verizon stock ROM doesn't allow you to see the contents of your phone like a flash drive? That's a universal Android feature, so it's puzzling you can't see the folder.
Again, one step at a time... What version of TWRP are you on? Answer the question.

My backup is in /data/media/0/TWRP/BACKUPS
I can see that folder on my phone but not on the PC

nlinecomputers said:
My backup is in /data/media/0/TWRP/BACKUPS
I can see that folder on my phone but not on the PC
Click to expand...
Click to collapse
For the third time. What version of TWRP are you on?

TWRP is 287.

If that's a limit of Verizon stock ROM, then that's your fault.
Click to expand...
Click to collapse
How the **** is that? I'm not Motorolla I didn't make the phone.
You're saying Verizon stock ROM doesn't allow you to see the contents of your phone like a flash drive?
Click to expand...
Click to collapse
Yes. Common knowledge. https://www.verizonwireless.com/support/knowledge-base-117349/

nlinecomputers said:
TWRP is 287.
Click to expand...
Click to collapse
That should work. but go ahead and update to 3.0.
the reason I was asking is because a year ago there was an unofficial version of TWRP for Quark that worked with 4.4.4 but not Lollipop to see files on the PC. But 2.87 is official and works. Still go ahead and flash 3.0.
Now, when you connect to PC do you see the autoplay dialog pop up?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And if you see that, do you then see all the folders?
Inside that folder then is a "Backups" subfolder with the backup file.

Nope, that folder is empty. It is empty on my phone too. It isn't the same folder as /data/media/0/TWRP That folder is at /sdcard/TWRP
I'll redo the backup and plant the files there and see if they show up. But MTP doesn't show all files even in the folders that do show up.

IF you are not getting the auto play pop up dialog, then it means the proper Motorola drivers are not installed on your PC.
---------- Post added at 12:23 PM ---------- Previous post was at 12:22 PM ----------
nlinecomputers said:
Nope, that folder is empty. It is empty on my phone too. It isn't the same folder as /data/media/0/TWRP That folder is at /sdcard/TWRP
I'll redo the backup and plant the files there and see if they show up. But MTP doesn't show all files even in the folders that do show up.
Click to expand...
Click to collapse
Forget folder /data/media/0/TWRP
That has nothing to to do with seeing the folders on your PC as a flash drive.
Look at my screenshot above. You do not see any 0/data crap. It says "internal storage".
______
Are you getting the auto play pop up dialog? Do you have the proper Motorola drivers installed on your PC?
When you plug in the phone to your PC and it turns into a thumb drive, jump drive, flash drive, you will see all the media folders.
You shouldn't have to "plant" the backup anywhere.
I've added more screenshots above. But it will help if you answer the questions... do you see the auto play pop up dialog when you plug in the phone?
When I plug in my phone, in "My Computer", I see the phone model and beside it is a description "Portable Media Player". This means it's acting as a flash drive. What does yours say in the My Computer description?
Look at my screenshot above. You do not see any 0/data crap. It says "internal storage".
---------- Post added at 12:34 PM ---------- Previous post was at 12:23 PM ----------
Download and install these Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
That may be your problem. Your smartphone is not being recognized as a flash drive properly.
Reboot the PC after installing the drivers.
Do you see the auto play pop up dialog?
---------- Post added at 12:40 PM ---------- Previous post was at 12:34 PM ----------
nlinecomputers said:
How the **** is that? I'm not Motorolla I didn't make the phone.
Yes. Common knowledge. https://www.verizonwireless.com/support/knowledge-base-117349/
Click to expand...
Click to collapse
No one else has that problem with TWRP installed. Everyone else sees their phone as a flash drive. But maybe they are on custom ROM?

No one else has that problem with TWRP installed. Everyone else sees their phone as a flash drive. But maybe they are on custom ROM?
Click to expand...
Click to collapse
Yep. MTP only shows the SDCARD directory on any phone. For a Droid Turbo, even with custom roms, that directory is emulated as there is no SDCARD on that phone.
The stock rom doesn't support USB mode. Phones that support that mode have that option in the USB connection menu. Your recovery program will not make any change on that. They are two separate OS environments.
Yes I have Moto drivers installed. Yes I get the popup(when I turn that feature on in Windows. I hate it so it is off on my machine by default) And yes I can see a TWRP directory but it isn't the same. Using root explorer, I can see TWO such directories and in two different locations. Again MTP mode only shows you the SDCARD directory of any phone. You can't get to the true /. So I can't see the /data directory and thus can't get to the default location TWRP put my files. Like I said when I get a spare moment I will move that location to the "sdcard" and try again. Thanks anyway talking to you let me work out what was going on so you have been a help.

nlinecomputers said:
Yep. MTP only shows the SDCARD directory on any phone. For a Droid Turbo, even with custom roms, that directory is emulated as there is no SDCARD on that phone.
The stock rom doesn't support USB mode. Phones that support that mode have that option in the USB connection menu. Your recovery program will not make any change on that. They are two separate OS environments.
Yes I have Moto drivers installed. Yes I get the popup(when I turn that feature on in Windows. I hate it so it is off on my machine by default) And yes I can see a TWRP directory but it isn't the same. Using root explorer, I can see TWO such directories and in two different locations. Again MTP mode only shows you the SDCARD directory of any phone. You can't get to the true /. So I can't see the /data directory and thus can't get to the default location TWRP put my files. Like I said when I get a spare moment I will move that location to the "sdcard" and try again. Thanks anyway talking to you let me work out what was going on so you have been a help.
Click to expand...
Click to collapse
All the Quarks have the same hardware, especially storage. While Verizon stock ROM may not support USB mode, I KNOW custom ROMs do.
go over to the Quark TWRP thread and ask...
If your problem is Verizon stock ROM, then maybe they can help you with workaround.
[RECOVERY][OFFICIAL TWRP 3.0.0-0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
_____________
---------- Post added at 01:35 PM ---------- Previous post was at 01:28 PM ----------
I just went into ComputerFreak274 thread (stock ROM) and they see TWRP folders fine too.
computerfreek274 said:
Otg to flash drive auto mount in twrp fine. I use it all the time.
twrp also connects auto to windows and Linux just fine.
I did see it was buggy on Mac.
Click to expand...
Click to collapse
computerfreek274 said:
You do not have click USB under twrp. It is auto mounted in twrp it will show up in my computer a quark. That USB mount you see is if you had an USB flash drive like the new micro flash sticks.
You you do not see quark listed, go to device manager and see if you have an error on your driver. Seeing your on Mac you may have to search twrp Mac see if you find info. It works on windows and Linux just fine.
Go to reboot menu and hit reboot recovery and see if Mac mounts it there. Or on Mac load program "disk" and see if it is on the left side menu bar if it is right click and hit mount.
Click to expand...
Click to collapse
What he means is he is plugging in to the computer while in TWRP recovery -- and it auto-connects to his PC.
Whereas, I'm plugging in during regular Android CM12.1...
So, try his way. Boot into recovery and then plug in?
How are you doing it -- in Recovery or during regular ROM interface?
__________
---------- Post added at 01:41 PM ---------- Previous post was at 01:35 PM ----------
From the Quark TWRP thread:
mjc2251 said:
Does USB otg work on turbo? I just tried to mount an otg flash drive and it would not mount.
Edit: Nevermind I gave it a few more tries and got it working!
Click to expand...
Click to collapse
baybutcher27 said:
2# post update just in case more USB bugs...
Click to expand...
Click to collapse

Did you see the suggestions in this post? computerfreak274 drags off the TWRP files in Recovery. He's the dev for stock Verzon ROM with tweaks and TWRP works fine with stock Verizon ROM to see the files. It auto connects to Windows when the phone is in recovery mode. Have you tried that?
Also go to the TWRP thread.
ChazzMatt said:
All the Quarks have the same hardware, especially storage. While Verizon stock ROM may not support USB mode, I KNOW custom ROMs do.
go over to the Quark TWRP thread and ask...
If your problem is Verizon stock ROM, then maybe they can help you with workaround.
[RECOVERY][OFFICIAL TWRP 3.0.0-0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
_____________
---------- Post added at 01:35 PM ---------- Previous post was at 01:28 PM ----------
I just went into ComputerFreak274 thread (stock ROM) and they see TWRP folders fine too.
What he means is he is plugging in to the computer while in TWRP recovery -- and it auto-connects to his PC.
Whereas, I'm plugging in during regular Android CM12.1...
So, try his way. Boot into recovery and then plug in?
How are you doing it -- in Recovery or during regular ROM interface?
__________
---------- Post added at 01:41 PM ---------- Previous post was at 01:35 PM ----------
From the Quark TWRP thread:
Click to expand...
Click to collapse

nlinecomputers said:
Is there an app I can use to push the file via the USB or even wifi to my PC?
Click to expand...
Click to collapse
This should work for WIFI transfer.
https://play.google.com/store/apps/details?id=com.pushbullet.android.portal
Sent from my XT1254 using Tapatalk

Accessing from TWRP instead of the normal phone allowed the hidden root files to be seen. It still only provides MTP access to the emulated SDCARD but that is enough to get the job done.. TWRP is root level and the normal file sharing isn't so I'm guessing that is the issue. A custom ROM probably gives full root access even from the phone.

Sorry guys I been off here for a bit been runing high fever and found out I have pneumonia. Thank you guys for stepping up and help each other. It is going to be a week or so before I am feeling better. We maybe able to have a custom build of marshmallow by the end of the month.
Twrp locks and hides backups after you exit twrp you must cope backups to your PC from twrp this info was listed and is also on twrp forums.
If anyone is still stuck with anything just PM me so I do not have to reply to stuff that may have already been fixed.
Thank you.

I to discovered the lack of access to the TWRP files in regular viewing when connecting the phone to PC. My solution was to move the file to 0/emulated using a file Explorer on the phone. Doing it from within TWRP, connected to PC is good to know.

How to solve adb bad_alloc problem when trying to sideload update?

Hi,
Im trying to update my OP3T with adb sideload but i keep having these error?
what should i do?
Thanks

zevim2005 said:
Hi,
Im trying to update my OP3T with adb sideload but i keep having these error?
what should i do?
Thanks
Click to expand...
Click to collapse
Which adb version do you use?
Type the command: adb version
Sent from my ONEPLUS A3003 using Tapatalk

Is saying 1.0.39

Which OS do you use?

4.1.3 and im triyng to flash open beta 4!

I mean the OS on your PC. Not Andoid which is kinda obvious when someone uses adb.

yep ypu re right kkk,windows 10

Any previous adb versions on your PC. From where did you download it?

just received my new notebook,came from windows 10....downloaded from google new just adb files....

Try this version. Make sure to issue the command "adb kill-server" before you fire up the other version.
Report back, pal.

download minimal adb and fastboot google for it
---------- Post added at 09:05 PM ---------- Previous post was at 09:04 PM ----------
here you are https://forum.xda-developers.com/showthread.php?t=2317790

https://dl.google.com/android/repository/platform-tools_r25.0.3-windows.zip

both didnt work,cannot read the file error....

Must be file related then. What's in the zip file?

the open beta 4,downloaded twice from op website!

Probably corrupt update.zip, if not don't update file for your phone (example for 3 instead of 3t).

Ok,after a lot of searching,i found out that my problem was that windows 10 decided to install leeco drivers instead of google adb drivers.
So i remove the leeco drivers following this guide and then Installed Google drivers and successfully worked with adb links that you guys provided,so thank you very much for the help!
Guide by nAFutro on reddit:
A few steps to get rid of the LeMobile pesky driver.
Have the device manager opened "devmgmt.msc". Make sure the LeMobile is visible in the device tree by connecting your phone or tablet.
Open the Command Prompt with Admin privilege. type "pnputil /enum-drivers" This should generate a list, lookup the "Published Name" value of the LeMobile driver, should be something like "oem??.inf" Remember this name.
Use the following command in the Command Prompt with Admin rights: "pnputil /delete-driver oem??.inf /force" Of course oem??.inf should be the name you found in step 2.
Go to the device manager. Right-click on the LeMobile device still shown in the device manager and select "Update Driver Software". Now you can browse to your preferred driver like the one in location "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver"
And You're done! Cool thing is that you will have to do it again if you connect a tablet or something new and Microsoft decides the LeMobile driver is better then Googles driver...

[GUIDE] Fix Screen Recorder stuck bug

Few RM3 are experiencing a bug in which the screen recorder button in notification bar get stuck and doesn't turn on or off anymore so here'e the fix
REQUIREMENTS:
ADB: https://forum.xda-developers.com/attachment.php?attachmentid=4623157&d=1540039037
STEPS:
1. Turn on USB debugging in your phone from developer options
2. Connect your device to your PC and open Windows powershelll(if windows 10) or cmd(if windows 7) in the adb folder
3. Type the following commands without the ""
adb devices
adb shell
“pm uninstall -k --user 0 <cn.nubia.supersnap>”
4. After it shows success reboot your device and cloase the cmd window
5.Open the cmd window again and connect your device and type the following command
"adb shell cmd package install-existing <cn.nuba.supersnap>"
6. Reboot your device and your problem will be fixed

Hi,
I just tried your instructions, and eventually, it worked out. I fixed the issue. But your manual contains some slight errors:
- The “pm uninstall -k --user 0 <cn.nubia.supersnap>” part should be typed in CMD without the < > marks, this is kind of unclear.
- Step 5 contains 2 errors, cn.nuba.supersnap should become cn.nubia.supersnap, and here the command only works when you
remove "adb shell", so: ''cmd package install-existing cn.nubia.supersnap" should work.
At least with me it worked like this, hope it helps.
Kind regards

I could not understand the starting process..
Please I didn't understand what's ABD Folder...I couldn't find it anywhere ..
---------- Post added at 05:57 PM ---------- Previous post was at 05:25 PM ----------
MobileFortress said:
Hi,
If you weren't here..I would never fix this..Idk how to thank you ..
Click to expand...
Click to collapse

Здравствуйте, а можете ещё раз объяснить как это делать?
(Я пробовал не помогло)
Hello, can you explain how to do this again?
(I tried it didn’t help) and are there any other ways?

a Big thank you...
souma_rox said:
Few RM3 are experiencing a bug in which the screen recorder button in notification bar get stuck and doesn't turn on or off anymore so here'e the fix
REQUIREMENTS:
ADB: https://forum.xda-developers.com/attachment.php?attachmentid=4623157&d=1540039037
STEPS:
1. Turn on USB debugging in your phone from developer options
2. Connect your device to your PC and open Windows powershelll(if windows 10) or cmd(if windows 7) in the adb folder
3. Type the following commands without the ""
adb devices
adb shell
“pm uninstall -k --user 0 <cn.nubia.supersnap>”
4. After it shows success reboot your device and cloase the cmd window
5.Open the cmd window again and connect your device and type the following command
"adb shell cmd package install-existing <cn.nuba.supersnap>"
6. Reboot your device and your problem will be fixed
Click to expand...
Click to collapse
Thank you so much I appreciate it I was about to go and do a factory reset.. Thanks a lot...
I do have another issue while playing game my trigger on the right side gets stucked sometimes in most of the games I play i.e COD and PUBG , I turn off the red time swtich and then turn it back on while in game it works sometimes and sometime I have to kill the sgame to resolve ... Is there any solution for it ?

YoSing said:
Thank you so much I appreciate it I was about to go and do a factory reset.. Thanks a lot...
I do have another issue while playing game my trigger on the right side gets stucked sometimes in most of the games I play i.e COD and PUBG , I turn off the red time swtich and then turn it back on while in game it works sometimes and sometime I have to kill the sgame to resolve ... Is there any solution for it ?
Click to expand...
Click to collapse
Go to settings>apps search gamespace and clear cache

Is it possible to do this using terminal emulator?
Sent from my NX629J using Tapatalk

MobileFortress said:
Hi,
I just tried your instructions, and eventually, it worked out. I fixed the issue. But your manual contains some slight errors:
- The “pm uninstall -k --user 0 <cn.nubia.supersnap>” part should be typed in CMD without the < > marks, this is kind of unclear.
- Step 5 contains 2 errors, cn.nuba.supersnap should become cn.nubia.supersnap, and here the command only works when you
remove "adb shell", so: ''cmd package install-existing cn.nubia.supersnap" should work.
At least with me it worked like this, hope it helps.
Kind regards
Click to expand...
Click to collapse
bro please help its not working for me after running the uninstall command it says its not recognised as internall or external command
please help brother
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
alexmactavish15 said:
Please I didn't understand what's ABD Folder...I couldn't find it anywhere ..
---------- Post added at 05:57 PM ---------- Previous post was at 05:25 PM ----------
MobileFortress said:
Hi,
If you weren't here..I would never fix this..Idk how to thank you ..
Click to expand...
Click to collapse
Bro please help me as well, as after running the uninstall command it show the command is not recognised as internal or external command. Please help
Click to expand...
Click to collapse

2_far said:
bro please help its not working for me after running the uninstall command it says its not recognised as internall or external command
please help brother
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
alexmactavish15 said:
Please I didn't understand what's ABD Folder...I couldn't find it anywhere ..
---------- Post added at 05:57 PM ---------- Previous post was at 05:25 PM ----------
Bro please help me as well, as after running the uninstall command it show the command is not recognised as internal or external command. Please help
Click to expand...
Click to collapse
Did you install adb? Search adb xda on Google and you'll get the installer... Adb is installed in c:/adb folder
Click to expand...
Click to collapse

YoSing said:
Thank you so much I appreciate it I was about to go and do a factory reset.. Thanks a lot...
I do have another issue while playing game my trigger on the right side gets stucked sometimes in most of the games I play i.e COD and PUBG , I turn off the red time swtich and then turn it back on while in game it works sometimes and sometime I have to kill the sgame to resolve ... Is there any solution for it ?
Click to expand...
Click to collapse
Bro how u do it please tell me as well
I already installed adb, as the link was there in the beginning of the thread.

2_far said:
bro please help its not working for me after running the uninstall command it says its not recognised as internall or external command
please help brother
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
alexmactavish15 said:
Please I didn't understand what's ABD Folder...I couldn't find it anywhere ..
---------- Post added at 05:57 PM ---------- Previous post was at 05:25 PM ----------
Bro please help me as well, as after running the uninstall command it show the command is not recognised as internal or external command. Please help
Click to expand...
Click to collapse
Did you install adb? Search adb xda on Google and you'll get the installer... Adb is installed in c:/adb folder
Click to expand...
Click to collapse

souma_rox said:
Few RM3 are experiencing a bug in which the screen recorder button in notification bar get stuck and doesn't turn on or off anymore so here'e the fix
REQUIREMENTS:
ADB: https://forum.xda-developers.com/attachment.php?attachmentid=4623157&d=1540039037
STEPS:
1. Turn on USB debugging in your phone from developer options
2. Connect your device to your PC and open Windows powershelll(if windows 10) or cmd(if windows 7) in the adb folder
3. Type the following commands without the ""
adb devices
adb shell
“pm uninstall -k --user 0 <cn.nubia.supersnap>”
4. After it shows success reboot your device and cloase the cmd window
5.Open the cmd window again and connect your device and type the following command
"adb shell cmd package install-existing <cn.nuba.supersnap>"
6. Reboot your device and your problem will be fixed
Click to expand...
Click to collapse
I'm wondering if this would sort out my issue where when I record only audio is recorded without video. But red magic moments records both video and audio. I'm using red magic 5g