Database Develop

[Q] Sort Me out on 4.4.3 update

The more I read the more confused I get. Could someone sort me out?
<complain>I got the moto x because of the quick OTA updates. Now it seems that because I installed TWRP and froze a few apps with TB that this feature is totally borked!</complain> is that correct? I cannot update without stock recovery and all the original apps installed / unfrozen?
In my predicament would the easiest thing to do be
1. Unfreeze any system apps I've frozen.
2. Use msfastboot to reflash stock recovery?
3. Accept the OTA or somehow flash it manually (I'm not sure about this last one see below)
I accidentally accepted the OTA download and now it bugs me to install. I won't install because it just reboots into TWRP. But it does keep prompting me to set at time to install. If I simply flash stock recovery I think i will still get this prompt. Would that be the easiest way to go?
Thanks for any advice.

pairustwo said:
The more I read the more confused I get. Could someone sort me out?
<complain>I got the moto x because of the quick OTA updates. Now it seems that because I installed TWRP and froze a few apps with TB that this feature is totally borked!</complain> is that correct? I cannot update without stock recovery and all the original apps installed / unfrozen?
In my predicament would the easiest thing to do be
1. Unfreeze any system apps I've frozen.
2. Use msfastboot to reflash stock recovery?
3. Accept the OTA or somehow flash it manually (I'm not sure about this last one see below)
I accidentally accepted the OTA download and now it bugs me to install. I won't install because it just reboots into TWRP. But it does keep prompting me to set at time to install. If I simply flash stock recovery I think i will still get this prompt. Would that be the easiest way to go?
Thanks for any advice.
Click to expand...
Click to collapse
1. - You do not need to unfreeze apps. The apps are still there untouched in the file system, and in recovery the OS hasn't booted enough to know that the apps are "frozen". By the way, frozen apps are basically just tagged in the OS as not available....so with the OS not running (just recovery is), they aren't "frozen" in recovery.
2. - Yes, fastboot to flash stock recovery. Boot to bootloader mode, fastboot flash recovery recovery.img (you don't need mfastboot for recovery, though you can still use it.)
3. - Accept the OTA. Since yours is trying to install, you should be able to boot to bootloader, flash stock recovery and on reboot it will start the install of the OTA. When done and booted.....reflash TWRP if you like.

That would be the way to go, yes.
Flash stock recovery and try to upgrade. If you cannot, try to unfreeze all sys apps. That should do it. ?

OK. So maybe not such a huge PIA as I had thought. I will track down the recovery file and read the instructions for flashing.
Thanks

@pairustwo
Every time another OTA comes out, people who modify their phones ask the same question. I've written up a FAQ based on the past OTA's.. -> http://mark.cdmaforums.com/MotoX-OTA.html if you want to read it to get more info.
Part of the issues you are talking about when taking an OTA is that the OTAs want to patch and replace only SOME files on your phone, so it checks to make sure the update is for your phone and its android version by evaluating certain files on the phone, that they exist and that their check sums match what the update expects.
i.e. change/modify/delete files the OTA update checks before installing, and the OTA will refuse to install.
If it didn't do this, the wrong update could possibly flash to your phone, replacing files with incompatible versions and making a big mess.
So yeah, "getting back to stock" (or as close to it as you can) is always recommended before taking an OTA so the "check" doesn't fail and prevent the OTA from applying.
In the past, freezing apps with Ti Backup was enough of a modification to cause the OTA's to fail. So often it is still suggested to un-freeze those done with TiBackup.
The OTA zip file (as downloaded) will only flash from Stock Recovery. TWRP and CWM for example don't properly process and flash them, so if you try to install when stock recovery is NOT on your phone, you get stuck in a bootloop. Using mFastboot to flash stock recovery back on is fine for those with unlocked bootloaders. Locked Bootloader users, is another matter.
There is a way "side load" the OTA, IF you have stock recovery, your phone hasn't received the push from Moto or your Carrier yet, and the OTA Zip file has leaked. But it still requires you get back to stock, etc. just as if you were getting it OTA.

So I've tried to flash back to stock but am having an issue. Does anyone have a link to a stock recovery image? Maybe the one I have is corrupt.

pairustwo said:
So I've tried to flash back to stock but am having an issue. Does anyone have a link to a stock recovery image? Maybe the one I have is corrupt.
Click to expand...
Click to collapse
Answered here -> http://forum.xda-developers.com/moto-x/moto-x-qa/dead-android-red-exclamation-t2778189
and I made this -> http://mark.cdmaforums.com/MotoX-EnterStockRecovery.htm

update, keep root and not wipe?

I've been flashing phones since way back with the tmobile G1, but I just don't have the time to be constantly fiddling around with my phone. To that end, I want to update from 5.0 to stock but rooted 5.0.1 (or 2) but I don't want to have to do a full wipe. It takes forever to get everything back just the way I like it. Is it possible? I'm getting the stupid OTA update notification and its driving me crazy.
By the way I did search before I posted a new thread. Found lots that say you can't take the OTA but nothing specifically pointing me to a stock ROM that won't require a wipe.
Thanks for taking the time to help.

ripsphone said:
I've been flashing phones since way back with the tmobile G1, but I just don't have the time to be constantly fiddling around with my phone. To that end, I want to update from 5.0 to stock but rooted 5.0.1 (or 2) but I don't want to have to do a full wipe. It takes forever to get everything back just the way I like it. Is it possible? I'm getting the stupid OTA update notification and its driving me crazy.
By the way I did search before I posted a new thread. Found lots that say you can't take the OTA but nothing specifically pointing me to a stock ROM that won't require a wipe.
Thanks for taking the time to help.
Click to expand...
Click to collapse
Options are:
1) Download full factory image and remove the -w flag from the flash-all script (Will replace your recovery)
2) individually fastboot flash the system, boot and radio image using fastboot from above factory image
3) find a recovery flashable rom.zip if you have a custom recovery
If you want root, flash it from recovery before booting.

ripsphone said:
I've been flashing phones since way back with the tmobile G1, but I just don't have the time to be constantly fiddling around with my phone. To that end, I want to update from 5.0 to stock but rooted 5.0.1 (or 2) but I don't want to have to do a full wipe. It takes forever to get everything back just the way I like it. Is it possible? I'm getting the stupid OTA update notification and its driving me crazy.
By the way I did search before I posted a new thread. Found lots that say you can't take the OTA but nothing specifically pointing me to a stock ROM that won't require a wipe.
Thanks for taking the time to help.
Click to expand...
Click to collapse
Here are the steps I took to flash the factory image and not lose my settings:
Flash bootloader and radio:
fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img
fastboot flash radio radio-shamu-d4.0-9625-02.55.04.img
After flashing the bootloader/radio, you need to reboot the bootloader as shown below, don't skip this step!
fastboot reboot-bootloader
I then unzipped this file: image-shamu-lrx22c.zip
Now you can move on to the rest of the files
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
Finally, just reboot your device, and Android should start up.
fastboot reboot
After the phone restarted I then used CF-Auto-Root to re-root my phone. I did not lose any of my settings or installed apps. HTH...

How to Install Project Fi OTA???

OK ... Dumb Question(s) - How do I update to the current Project Fi Build LVY48E?
- I have downloaded the posted Zip File (LVY48E from LVY48C - https://android.googleapis.com/packa...rblock-fix.zip)
- Does this affect the LVY48C Radios? - Prior instructions said to just flash the system image if the radios were not changed but this is not a factory image .zip file? - It looks like the update mainly affects the system but there is a boot.img.p patch that concerns me?
I am rooted, unlocked, decrypted (Stock Rom w/Hells Core Kernel), and have TWRP recovery installed and I don't want to lose any data, get encrypted, change the bootloader or lose my custom recovery.
Any help is appreciated

Here's the process I went through
1) Back a TWRP backup of your current system
2) Download the official LVY48C factory image from Google
3) Extract all the files out the factory image
4) Using fastboot flash system, recovery and boot with the factory image ones
5) Reboot into recovery which is the stock recovery
6) While in the stock recovery hold down the power button and tap the volume up button
7) Select apply update from USB or sideload mode
8) On your computer run adb sideload <name of ota>
9) Reboot back into the bootloader and flash TWRP again
I recommend simply waiting though until the factory image for LVY48E is posted by Google as it will be a much simpler process

Thanks for the information ... I thought I might be able to rename the zip to update.zip and sideload it through twrp. You are defintely right about the factory image, I can just pull the system image and flash that. I wonder if they will release a factory image since it was just a system patch?

Deckard_9732 said:
Thanks for the information ... I thought I might be able to rename the zip to update.zip and sideload it through twrp. You are defintely right about the factory image, I can just pull the system image and flash that. I wonder if they will release a factory image since it was just a system patch?
Click to expand...
Click to collapse
They've already posted the factory images for the standard build and the T-Mobile build so I imagine that they'll release the Fi one soon.

FYI, an OTA needs to be flashed from a stock recovery AND must be 100% stock rom and kernel...

samstudent said:
They've already posted the factory images for the standard build and the T-Mobile build so I imagine that they'll release the Fi one soon.
Click to expand...
Click to collapse
Its out now

Couple questions after unlocking bootloader (XT1096)

Ok, here's the rundown - I have a VZW Moto X (XT1096). I previously ran mofo on it had flashed the 5.1 img files to it and so had 5.1 rooted, but with a locked bootloader. After learning that JCase had gotten sunshine to work on it I unlocked my boot loader. I then decided that because I was worried about having the a kind of mish-mash of systems on it, i.e., 5.0 bootloader (unlocked) with hacked and modded 5.1 system files flashed from mofo, that I wanted to start fresh. I then used the XT1096 flash to stock script and flashed back to 5.0 (there were a bunch of problems and bootloops and force closes, but I am happy to report I am now on a fully stock 5.0 with unlocked BL). Following being stock I have tried to take the OTA but have been unable to do so. When I try it OTA on my device it just sits at 0%. When I tried using MDM it gave me an error message that it failed to install the update - on the device it said getjar: unlocked.
So, now that I am on 5.0 with an unlocked bootloader I am not sure how to proceed with my priorities, Root, WiFi tethering and upgrading to 5.1. My questions are this:
(1) How can I upgrade to 5.1 or does my bootloader unlock preclude that?
(2) How best can I achieve root?
(3) Once I am rooted what do I need to do in order to enable wifi tethering?
Thank you so much!

Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot and flash the stock system.img and recovery.img before doing the update.
3. I don't have experience with Verizon network. I use T-Mobile on this Verizon device and I just enable WiFi Hotspot. In the APN settings, in the "APN type" field, I add the value "dun". And set everything to IPv4.

Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.

eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
Thank you for the reply - got the update to take and have gotten the device rooted properly.
Now I just need to enable wifi tether - anyone know what is done in the Mofo images that allows it - can i do the same here?

I am interested in this question as well. I am in the exact same boat as the OP, except I am still on a Mofo 5.1 img that is giving me issues. I'd like to flash back to stock and take the OTA. But wifi tether will be a must.

Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151

eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
I tried this but after I flash TWRP I can't boot to recovery. If I choose recovery from the bootloader it just turns off the phone (charging icon). If I send it adb reboot recovery I get error android "No Command."
Flashed it multiple times, tried mfastboot, no luck. Any ideas?
Edit: I feel dumb. I was using power button to try to select, it's volume up. Good to go.

GatorsUF said:
Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151
Click to expand...
Click to collapse
The other method (the one I used) was to install the Xtether xposed module for the 2013 Moto X - worked perfectly for me.

I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?

SargeStryker said:
I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?
Click to expand...
Click to collapse
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478

juliospinoza said:
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478
Click to expand...
Click to collapse
Thanks!

Haven't been able to update since LMY48I. Trying to get on Marshmallow now.

Okay, I haven't been able to update since LMY48I. Back then I was on stock recovery. Re-locking bootloader and all but still was not able to take OTA (always came up with dead android guy with "Error"). I'll skip the (probably) irrelevant stuff since then and give you the current situation:
Currently unlocked, rooted, with custom recovery. Still on LMY48I. I can't take OTAs obviously, and have tried flashing OTA updates manually with no luck and have tried flashing the entire Marshmallow image and that will not work either (sideload or flashing from internal storage in recovery). Sideload comes up with Closed error (device DOES show up in device list and I can do other things). Flashing from within recovery just says "Failed".
Please help me get to Marshamallow!
Edit: On Project Fi by the way.
Edit 2: Also, I've tried the flash-all script.

Now it says the device is corrupted when I boot up. I can still access recovery. Any help walking me through getting all of the correct firmware and latest build on would be much appreciated.
Thank you.
Edit: Looks like i'm good. I flashed each .img individually. I'm super curious why flash-all, sideload, and flashing from device wouldn't work though.

altvisionx said:
......./I flashed each .img individually. I'm super curious why flash-all, sideload, and flashing from device wouldn't work though.
Click to expand...
Click to collapse
Flashall.bat stops; only m-bootloader and m-radio are flash. Google's fault. You did the right thing by extracting the images and fasbiot flash them.

You cannot sideload the full factory image or flash from storage. Only fastboot

And just to clarify, you can't take an OTA (sideloading or otherwise) if your phone is rooted, have a custom recovery or a custom kernel (or any other modification to the system). The state of the bootloader (locked or unlocked) does not affect the ability to take an OTA update.