Database Develop

[RECOVERY][ROOT][TWRP 3.0.2-0]Galaxy A8 sm-a800i - Exynos5433 -UPDATE 5/4/2016

Unofficial original release -TWRP recovery for the SM-A800I, Exynos5433
UPDATE 5/4/2016: TWRP 3.0.2-0 released
SEANDROID warning fix.
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
TWRP is now v3.0.2-0
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
UPDATE: 12/3/2016
New feature available in TWRP 3.0.0-0 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory images from the official firmware can now be flashed with TWRP instead of ODIN. I have extended this feature to include BOOT, RECOVERY, SYSTEM, CACHE, HIDDEN and RADIO(MODEM) partitions.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.
NOTE: To flash the modem, first it needs to be renamed to modem.bin.img
F2FS support added.
Internal SUPERSU root option removed. This is to prevent boot loops on 5.11/6.0 devices
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
twrp_3.0.2-0_sm-a800i
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
To Root:
Flash the SuperSU zip below with TWRP.
DO NOT LET TWRP ROOT YOUR DEVICE IF IT ASKS OR YOU WILL BOOT LOOP, ONLY USE THE FILE BELOW:
http://download.chainfire.eu/1019/SuperSU/SR2-SuperSU-v2.79-SR2-20170103215521.zip
GUIDE
https://boycracked.com/2016/04/23/h...2-0-root-samsung-galaxy-a8-sm-a800i-sm-a800f/
DEVICE TREE: github.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: Me, Teamwin and my tester - abhinavparasher
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.

Rooted/Custom recovery installed successfully
Please refer to the attachments.

are you flash a800f????

davod84 said:
are you flash a800f????
Click to expand...
Click to collapse
This version is only for sm-A800i. Do not flash it on any other model.
Do NOT flash it on A800F

does it work with a800iz ? i will try it now
edit : no , it's not working , it's get restart but no root, recovery working but its stick at bootloop

A . S said:
does it work with a800iz ? i will try it now
edit : no , it's not working , it's get restart but no root, recovery working but its stick at bootloop
Click to expand...
Click to collapse
You let supersu root your device which is why you have bootloop. ONLY use the file provided for root.

ashyx said:
You let supersu root your device which is why you have bootloop. ONLY use the file provided for root.
Click to expand...
Click to collapse
Your right ; my device is rooted now
Just do not twrp install supersu!
Sent from my SM-N910C using Tapatalk

Hello Everyone!. i experienced an issue with my rooting process. Now its stuck at the Samsung Galaxy A8 Logo with Red caption on top that says. Custom Binary Blocked by FRP lock. i tried flashing twrp that i downloaded from this thread but it failed with an error on my phone that says. Custom Binary(RECOVERY) Bloced by FRP Lock. I need your guidance, please help me.

ashyx said:
You let supersu root your device which is why you have bootloop. ONLY use the file provided for root.
Click to expand...
Click to collapse
Hi,
I sent you a DM. Coukd you take a look at it??
Thanks in advance.
Sent from my SM-A700F using XDA Free mobile app

rissered said:
Hello Everyone!. i experienced an issue with my rooting process. Now its stuck at the Samsung Galaxy A8 Logo with Red caption on top that says. Custom Binary Blocked by FRP lock. i tried flashing twrp that i downloaded from this thread but it failed with an error on my phone that says. Custom Binary(RECOVERY) Bloced by FRP Lock. I need your guidance, please help me.
Click to expand...
Click to collapse
u need to enable usb debugging & oem unlock from devlper option on phone setting first before start flash root file with odin..
Sent from my SM-A800I using Tapatalk

ryez88 said:
u need to enable usb debugging & oem unlock from devlper option on phone setting first before start flash root file with odin..
Click to expand...
Click to collapse
Yeah. That's what I did wrong. I turned the OEM Unlock off after a successful root. that was yesterday, but today after restarting my phone the frp lock triggered.
---------- Post added at 03:06 PM ---------- Previous post was at 03:01 PM ----------
I guess what i need to do is to download the firmware from sammobile. when i go there i only see China and HongKong as country choices. my country isnt there and my fone says its from Vietnam.

rissered said:
Yeah. That's what I did wrong. I turned the OEM Unlock off after a successful root. that was yesterday, but today after restarting my phone the frp lock triggered.
---------- Post added at 03:06 PM ---------- Previous post was at 03:01 PM ----------
I guess what i need to do is to download the firmware from sammobile. when i go there i only see China and HongKong as country choices. my country isnt there and my fone says its from Vietnam.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/download/59917/A800IXXU1AOJ1_A800IOLB1AOJ1_XXV/

Hi @ashyx. i downloaded the firmware file that i need, while extracting it is giving me a WinRar error that the file is corrupted. I know the downloaded completed properly because i was checking the whole time.
Additionally i believe i do need the latest Samsung USB Drivers that will work for my phone. I can't find it here.
Any tips would be great. and again, thanks a lot for the help

rissered said:
Hi @ashyx. i downloaded the firmware file that i need, while extracting it is giving me a WinRar error that the file is corrupted. I know the downloaded completed properly because i was checking the whole time.
Additionally i believe i do need the latest Samsung USB Drivers that will work for my phone. I can't find it here.
Any tips would be great. and again, thanks a lot for the help
Click to expand...
Click to collapse
Was the file in .rar/.zip format or did it end in .tar/.tar.md5?
Also, usb drivers can be found on samsungs official website for your country.
Most of the times, usb drivers do not need to be downloaded seperately if you are using an updated windows system.
Plug in your phone in download mode and start up odin. If the "com port" turns green, your phone is detected successfully.

Thanks for replying @abhinavparasher it was in zip file but when i extract it its in tar.md5. even when the error stating that the file is corrupted appears the whole extraction process still completes itself. and i already downloaded the USB driver and hope this works

rissered said:
Hi @ashyx. i downloaded the firmware file that i need, while extracting it is giving me a WinRar error that the file is corrupted. I know the downloaded completed properly because i was checking the whole time.
Additionally i believe i do need the latest Samsung USB Drivers that will work for my phone. I can't find it here.
Any tips would be great. and again, thanks a lot for the help
Click to expand...
Click to collapse
Use 7zip to extract it not Winrar.
If it says corrupted again then the download is not complete.
USB driver: http://developer.samsung.com/technical-doc/view.do?v=T000000117
Also you say your phone is made in Vietnam.
Samsung manufacturer their devices in Vietnam and Korea so that doesn't mean that's the firmware you need.
If you are from the Philippines then download the firmware for the Philippines.
www.sammobile.com/firmwares/database/SM-A800I
There is an app called Samsung phone info that will tell you everything you need to know about your device.

@ashyx thanks! i pre downloaded the Stock Firmware from the Philippines. i chose Openline since it is indeed openline. That is also the file that says it is corrupted when i try to extract it. I am downloading 7zip right now. I'll update you as soon as i get somewhere with this.
I would lie to try the Samsung app you're talking about but right now the only thing happening to my phone is go to logo screen then turn off again.

hi i flashed the twrp .do i flash supersu with odin? my phone:a800i/5.1.1

mohannad22 said:
hi i flashed the twrp .do i flash supersu with odin? my phone:a800i/5.1.1
Click to expand...
Click to collapse
TWRP.
Sent from my HTC One_M8 using XDA Free mobile app

https://github.com/ashyx/TWRP_Samsung_Galaxy_a8hplte/pulls
Please accept those changes

[TWRP 3.0.2-1] [ROOT] Samsung Galaxy On7 SM-G600FY

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP custom recovery for the Samsung Galaxy On7 SM-G600FY. Qualcomm MSM8916 Snapdragon 410
Latest build is 3.0.2-1
Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.
NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
To install TWRP:
1 .Boot to DOWNLOAD mode.
2. Flash with ODIN in the AP slot.
3 .Uncheck Auto reboot.
4. Load the respective file below into the AP slot and hit start.
6. After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
TWRP_3.0.2-1_SM-G600FY_141016
For Systemless Root with SuperSu.
1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031
2. Reboot
3. Check you have root
PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

So nice of you sir
you really help me out sir
these are my blessings from my heart that what you want in your life is always at your fingertips
Love you sir

yay! thx a lot, I will try it soon

Yeah its work but phone become slower after this and hitting issue too occurs..is it coz of unstable version of su or something else?

thanks a lot my friend
Thank You very much once again..
i had fixed internal storage of 8gb in my dads samsung galaxy on7.
he was facing issues due to less storage.
samsung also didnot support sd card as internal memory. so every now and then my father had to delete whatsapp chat and other stuff due download the new ones.
so i thought of selling it...
searched online but no solution except rooting...
And you gave the solution
Thanks to you, TWRP, SUPERSU, Root Essential...
it worked...
thanks a lot

@ashyx can u pls explain the instructions a little more. I use sony device so flashing n rooting Samsung is for the first time.
Update:
Ok i managed to figure it out.
Just one more question, will this work on lollipop 5.1.1 and MM both?
And where can i find stock firmwares to dload?
Thanks.

Link stopped working
Hello budy, how are you?
I would like to download the file TWRP_3.0.2-1_SM-G600FY_141016 but the link is not working, could you help me making the link available again?

will this work on 5.1.1 of sm g600fy ?
---------- Post added at 02:56 PM ---------- Previous post was at 02:49 PM ----------
ok.. if this doesnt work on 5.1.1. how about i roll back to 5.1.1 after the twrp is installed ??
is it possible to roll back without losing custom recovery and root access???

emraanhbk said:
will this work on 5.1.1 of sm g600fy ?
---------- Post added at 02:56 PM ---------- Previous post was at 02:49 PM ----------
ok.. if this doesnt work on 5.1.1. how about i roll back to 5.1.1 after the twrp is installed ??
is it possible to roll back without losing custom recovery and root access???
Click to expand...
Click to collapse
Just try it, it may well work, but why not just update to MM?
If it doesn't then all you need do is flash the stock recovery.img or firmware.

Grateful thank you so much
@ashyx I tested it here to download it on another computer and it worked, now only need to do the procedure and be happy .....
Thank you for your help.
Many thanks for your help and attention.

hbk
ok i follow your instruction just like you said and i rooted and install twrp on my device 5.1.1 on 7. i succeed. everything is fine.
but after that everytime i restart or switch on my device it shows msg SET WARRANTY BIT KERNAL.
is it normal ? or something went wrong ??

emraanhbk said:
ok i follow your instruction just like you said and i rooted and install twrp on my device 5.1.1 on 7. i succeed. everything is fine.
but after that everytime i restart or switch on my device it shows msg SET WARRANTY BIT KERNAL.
is it normal ? on something went wrong ??
Click to expand...
Click to collapse
Absolutely normal, it will only say this when booting to recovery.

Samsung On7 is slower after root
Please update Beta SuperSu 2.74.
BETA-SuperSU-v2.74-2-20160519174328-forced-systemless.zip

I was not using this phone only due to restricted memory. Now I got custom recovery. Thanks. I expect someone build a custom rom also.

Do after this process I can recovery the warranty?

100% Working in 5.1.1 Root
Thank you very much

Costum rom for SM-G600FY
Only costum recovery is not usefull if there is no costum rom. So please do somethink for costum rom for SM-G600FY 6.0.1 please Sr

Guys please save us we need SM-G600F 6.0.1 TWRP.
It has Exynos CPU, Any one would help my device is for testing.

Help me please
I need Twrp for my galaxy on7 G610L
It's new pocket livred un 3rd trimestre of 2016

Please dev make a custom rom for on7 smg600fy
---------- Post added at 04:47 PM ---------- Previous post was at 04:44 PM ----------
ashyx said:
TWRP custom recovery for the Samsung Galaxy On7 SM-G600FY. Qualcomm MSM8916 Snapdragon 410
Latest build is 3.0.2-1
Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.
NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
To install TWRP:
1 .Boot to DOWNLOAD mode.
2. Flash with ODIN in the AP slot.
3 .Uncheck Auto reboot.
4. Load the respective file below into the AP slot and hit start.
6. After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
TWRP_3.0.2-1_SM-G600FY_141016
For Systemless Root with SuperSu.
1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031
2. Reboot
3. Check you have root
PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
Please make a custom rom for on7 smg600fy
Thanks in advance

unofficial twrp for Nokia7+ By Dhruv and Maher

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
hello guys in last few daysME/Mr. Dhruv worked so hard to finally got Twrp ready to use so far we built Twrp for nokia 6.1 2018 and nokia 7 plus
Notice1:
both phones they share same kernel and tree and both have A/B partitions, this twrp based on nokia7+
to prevent issues its better to flash it in both slot, because I/We can not know on which partition you are
Notice2:
take a backup for your data and your important files or folders before you start your Warrenty will be lost
Notice3
to reboot recovery from buttons follow this steps:
first of all you have to plug your phone to pc or charger and switch off your phone totally then press and hold volume up and power at the same time untill the bootloader`s unlock message disappear after that release power button and keep holding volume up
there you are
Notice4
to boot to fastboot switch off your phone plug it to charger or pc wait till the screen charging become black now press and hold volume down and power buttons you`ll get fastboot page there you are
Notice5:
so far no issues but if you find any please let us know
and Dhruv working on complete Twrp fully funactions he will release it soon
Notice6:
If you have different model you can contact with me on Telegram link
https://t.me/Maherabed
Twrp Nokia 7 plus TA-1046
thanks to Nick he keep testing till we boot it up
https://drive.google.com/file/d/1k2G3ERyxBFJ3bTmGtKjCpF5i7vk9prbf/view?usp=sharing
Twrp Nokia 7 plus TA-1046 P DP4
https://drive.google.com/file/d/1jA7XRIXfm9zGb_YMWZq0UBZOWXOF1Iah/view?usp=sharing
Twrp Nokia 7 plus TA-1062 P DP4
https://drive.google.com/file/d/11SIAYHTto6A5qgsq_8W-gTZHkn3Zim0f/view?usp=sharing
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- use those codes
Code:
adb shell
Code:
reboot bootloader
now we flash it in slot a
Code:
fastboot flash boot_a <image`s name>.img‏
after that we flash it also in slot b
Code:
fastboot flash boot_b <image`s name>.img‏
then
Code:
fastboot reboot
it will boot to system dirctly so reboot to recovery
Code:
adb reboot recovery
5- install magisk.zip v16.7 download it with latest apk from here (( thanks for Magisk developers )
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
6- if you like our work hit like and if you want to share cup of cappuccino with me
paypal.me/MaherAbdulghani
Nokia globle group on Telegram go here
https://t.me/joinchat/EDAqGkPkzNQG5b7q28b1yw
Nokia 7 plus globle group on Telegram go here
https://t.me/joinchat/ItSJYkcNkKEXqcUCAaWlyg
Special thanks to
Team Win Recovery Project developers
big thanks to my mate Dhruv for hard work on this twrp

Reserved

#Reserved

N7+ TA-1062, stuck on "Nokia" boot screen after flashing this. Any help getting back to a functioning system?

Nokia 7+ global group on Telegram
https://t.me/joinchat/ItSJYkcNkKEXqcUCAaWlyg

How to unlock bootloader
---------- Post added at 04:11 AM ---------- Previous post was at 04:10 AM ----------
Is there picturs of the recovery
And please make video about how to do that
---------- Post added at 04:12 AM ---------- Previous post was at 04:11 AM ----------
And when i do that can i receive update from nokia

OK. It asked for password to decrypt the data. Pressed cancel and rebooted. Now, it goes into Download Mode every time

whoknowshimself said:
OK. It asked for password to decrypt the data. Pressed cancel and rebooted. Now, it goes into Download Mode every time
Click to expand...
Click to collapse
password should be the same that you use to unlock the phone when it's up and running. for me it's a pin. at least this is how it worked on my nexus 5x

Great. Now I am stuck in download mode. Does not boot into system anymore.
donjamal said:
password should be the same that you use to unlock the phone when it's up and running. for me it's a pin. at least this is how it worked on my nexus 5x
Click to expand...
Click to collapse

whoknowshimself said:
Great. Now I am stuck in download mode. Does not boot into system anymore.
Click to expand...
Click to collapse
After rebooting when I didn't have magisk installed after installing PixelExperience img, I am now also stuck in download mode whenever I try to reboot.
EDIT: After switching which partition to boot from a couple of times in reboot menu, I finally got back into a rom. I would suggest that "Whoknowshimself" try to do similar.

Sorry guys you all stuck on Download mode because of the command was written wrong
It was falsh but it's should be flash now all is okay

In case you got download mode loop try to active slot a for june release
Slot b for July
Fastboot --set_active=a
Fastboot --set_active=b

if i'm not mistaken, android version doesn't matter, does it? can i use this on P DP4?

I flashed everything correctly and was able to get into several ROM setups; PixelExperience, RR.
On every ROM though, SIM cards do not work in any slot.
I am in the process of getting back to stock and then I will make a rooted backup of the system with no user setup yet and I will upload the backup somewhere so that others can benefit from my experiments today.
EDIT: It will take me a while to get the backup uploaded etc... so don't hold your breath anybody
EDIT 2: It will be quicker and easier for people to just do the backup themselves before messing around flashing stuff. I can still upload it at some point if someone is in need, but just MAKE SURE YOU TAKE A BACKUP BEFORE ANYTHING ELSE.

Too late for me. I tried switching the active slot but to no avail. I had a backup but it is corrupted
I cannot even flash the ROM through OST. It says ROM does not match.
Doktaphex said:
I flashed everything correctly and was able to get into several ROM setups; PixelExperience, RR.
On every ROM though, SIM cards do not work in any slot.
I am in the process of getting back to stock and then I will make a rooted backup of the system with no user setup yet and I will upload the backup somewhere so that others can benefit from my experiments today.
EDIT: It will take me a while to get the backup uploaded etc... so don't hold your breath anybody
EDIT 2: It will be quicker and easier for people to just do the backup themselves before messing around flashing stuff. I can still upload it at some point if someone is in need, but just MAKE SURE YOU TAKE A BACKUP BEFORE ANYTHING ELSE.
Click to expand...
Click to collapse

whoknowshimself said:
Too late for me. I tried switching the active slot but to no avail. I had a backup but it is corrupted
I cannot even flash the ROM through OST. It says ROM does not match.
Click to expand...
Click to collapse
Everything working perfectly for me
Can you please tell me what model you guys have
Mine is TA-1046 JULY RELEASE

donjamal said:
if i'm not mistaken, android version doesn't matter, does it? can i use this on P DP4?
Click to expand...
Click to collapse
Better not I'll manage to edit to make it work on P DP4

TA-1062 May. Cannot boot anymore. Cannot flash using OST
Maherabed1986 said:
Everything working perfectly for me
Can you please tell me what model you guys have
Mine is TA-1046 JULY RELEASE
Click to expand...
Click to collapse

whoknowshimself said:
TA-1062 May. Cannot boot anymore. Cannot flash using OST
Click to expand...
Click to collapse
The way I fixed mine was to flash the patched July boot.img from the root your a/b partitions to both boot a and boot b.
I then downloaded all the zips to downgrade to Oreo from the official firmware and ota thread.
I used the latest rollback from that thread and then the 3 ota patches.
I side-loaded each one and booted the phone between each zip flash.
I am now at stock 8.1 fully rooted with magisk 16.7 with safety net passing completely.

Doktaphex said:
The way I fixed mine was to flash the patched July boot.img from the root your a/b partitions to both boot a and boot b.
I then downloaded all the zips to downgrade to Oreo from the official firmware and ota thread.
I used the latest rollback from that thread and then the 3 ota patches.
I side-loaded each one and booted the phone between each zip flash.
I am now at stock 8.1 fully rooted with magisk 16.7 with safety net passing completely.
Click to expand...
Click to collapse
Magisk v16.7 caused random power off after 5 minutes so i prefer using 16.6

[RECOVERY][ROOT]TWRP 3.2.3-1 Galaxy A7 2018/A750

Unofficial release -TWRP recovery for the Galaxy A7 2018 - SM-A750F EXYNOS 7885
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.3-0 Released
Aug 6, 2018
TWRP 3.2.3-0 is out now for most currently supported devices.
What's new in 3.2.3-0:
* Fix automatic installing of OTA zips on encrypted devices
* Remove SuperSU from TWRP
* Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Update 25/12/2018
Beta build released.
Current status - (Tested working)
Treble supported
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
*****INSTALL INSTRUCTIONS:*****
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
(Hold POWER + VOL DOWN + VOL UP)
2. Load the file below into the AP slot, uncheck AUTO-REBOOT and hit start.
twrp_3.2.3-1_a750_251218
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the RMM bypass zip
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.
5. Reboot to TWRP (Do not boot to the OS yet)
*****OREO ROOT INSTRUCTIONS:*****
NOTE: To mount data it is necessary to first *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
Continue with the instructions below to prevent the data partition becoming re-encrypted.
1. To root I suggest downloading and installing the latest Magisk as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Copy the Magisk zip to a Micro sd card then install with TWRP.
3. Enjoy your rooted device.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, @BlackMesa123 for RMM bypass zip.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

158 views, 20 downloads and not one reply.
Smashing guys. :good:

4. перепрограммируйте обходной zip- архив rmm.можно поподробнее?
Mod edit: English please!
Google translation:
4. reprogram the rmm bypass zip archive. can you be more specific?

Odin shows Failed !! Tried 3 Times ? Had to Flash the Firmare Again.
Help !!

notoriouschyld said:
Odin shows Failed !! Tried 3 Times Had to Flash the Firmare Again.
Help !!
Click to expand...
Click to collapse
Sorry about that, build error on my end. Fixed now.

It will not work on SM-A750FNXXU1ARIC?

Sfuj24 said:
It will not work on SM-A750FNXXU1ARIC?
Click to expand...
Click to collapse
Is that a statement or question?

Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?

powermen27 said:
Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?
Click to expand...
Click to collapse
No matter how complete an instruction is, if you don't bother reading it in the first place it's not going to make any difference.
As clearly posted in the OP:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Click to expand...
Click to collapse

sorry

ashyx said:
Sorry about that, build error on my end. Fixed now.
Click to expand...
Click to collapse
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!

notoriouschyld said:
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!
Click to expand...
Click to collapse
Can you tell me which firmware build number you are running and if possible a screen shot of your device screen while booted to download mode?

Stuck in bootloop after flashing twrp
A750FXXU1ARK7

A7whatever said:
Stuck in bootloop after flashing twrp
A750FXXU1ARK7
Click to expand...
Click to collapse
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
https://androidfilehost.com/?fid=11410963190603874542

ashyx said:
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
Click to expand...
Click to collapse
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number

A7whatever said:
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number
Click to expand...
Click to collapse
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?

ashyx said:
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?
Click to expand...
Click to collapse
Flashed the old sboot.bin however got the same bootloop

A7whatever said:
Flashed the old sboot.bin however got the same bootloop
Click to expand...
Click to collapse
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?

ashyx said:
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?
Click to expand...
Click to collapse
Yes

A7whatever said:
Yes
Click to expand...
Click to collapse
Hmm looks like I'll have to take another look at the twrp config or kernel build.
If I pack the kernel into a boot image would you be willing to test if it boots?

[RECOVERY][UNOFFICIAL][3.5.2] TWRP for Galaxy M21 [CWB1 and Above]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I am not the developer.
Developer: @naz664
Changelog:
Spoiler: View
Changelog :-
- Souls recovery with latest A12 support (Jan 2023)
- Updated kernel
- This recovery won't work on older stock version
So don't flash this unless you are running latest jan 2023 stock rom
How to install?
Spoiler: ODIN (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Press the volume down + volume up button whilst the phone is connected to a pc to boot in download mode;;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol down + Bixby key + USB cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, factory reset data and redo from step 5!
Download TWRP.tar from download link below;
Open odin and place the TWRP.tar file in AP slot and press start. Once you press start, keep holding power and volume up button and the device will reboot to recovery mode.
* If you're coming from stock, go to "Wipe" > ""Format Data" > type "yes" to format data. If you skip this, Internal storage won't work in TWRP
Flash the encryption_disabler.zip from the link below to disable internal storage encryption and patch stock recovery restoration.
Additionally, flash TWRP_Bootlogo_patcher to patch warning screens when booting the device.
If you want to root, flash Magisk.
Spoiler: TWRP
If you're coming from other TWRP versions, download TWRP.img, reboot to recovery, tap Install > Install Image > Navigate to downloads folder > select TWRP.img > Select Recovery and swipe to confirm flash. Go to reboot and reboot to recovery and the changes will have taken place.
TWRP Source: GitHub
Credits:
Soul reaper
Nazim
Lmao
Max B
Darshana & Encrypted for testing
Important:
This version only works on the latest update of stock rom (M215FXXU3CWB1) and above. If you are running an older version, use the previous build of TWRP.
Download: Link

И что делать ?

w1nk1 said:
И что делать ?
Click to expand...
Click to collapse
Different device?

Hi Fredin friend,
I Recently upgraded SM-M215G device to OneUi5.1 (M215GDDS3CWD1-20230522142126) Binary 3 and TWRP (twrp-3-5-2-m21-v3-1-a12-tar)but anything I am flashing is either bootlooping or stuck on Rom Logo, I flashed (Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip) still only Rom Logo showing, how to boot the GSIs? Any help appreciated.

OldNoobOne said:
Hi Fredin friend,
I Recently upgraded SM-M215G device to OneUi5.1 (M215GDDS3CWD1-20230522142126) Binary 3 and TWRP (twrp-3-5-2-m21-v3-1-a12-tar)but anything I am flashing is either bootlooping or stuck on Rom Logo, I flashed (Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip) still only Rom Logo showing, how to boot the GSIs? Any help appreciated.
Click to expand...
Click to collapse
Hi
If you had unencrypted data (if you could see files in internal storage) and flashed the latest stock rom, but you didn't flash encryption/multi disabler before the first boot into OneUI, it will probably cause problems.
So try formatting data and flash encryption/multi disabler (although I believe dm verity disabler also disables encryption by default, but it won't hurt flashing them). Or you can format data and not flash anything to let data stay encrypted, but then you won't be able to use the internal storage in TWRP.

Fredin_ said:
Hi
If you had unencrypted data (if you could see files in internal storage) and flashed the latest stock rom, but you didn't flash encryption/multi disabler before the first boot into OneUI, it will probably cause problems.
So try formatting data and flash encryption/multi disabler (although I believe dm verity disabler also disables encryption by default, but it won't hurt flashing them). Or you can format data and not flash anything to let data stay encrypted, but then you won't be able to use the internal storage in TWRP.
Click to expand...
Click to collapse
Hi friend Fredin,
Thanks for the reply.
I used (twrp-3-5-2-m21-v3-1-a12-tar) and it is smooth (just like previous Soulr-A11 twrp) but sideload did not work while the other recovery (TWRP.3.7.0_11.-.M215FXXU3CWB1.tar) by Dev Ravindu Deshan works great too but Reboot to Recovery does not work properly all the time, so sometimes instead of Reboot to Recovery the changes happen when manually reboot to recovery using usb cable also sometimes it does not recognise pen drive. Till now I only managed to boot Tuki1.2 and the other Lineage 20 zip had Oplist error 1 issue. Hoping for GSI boot too later. Thanks for recovery

OldNoobOne said:
Hi friend Fredin,
Thanks for the reply.
I used (twrp-3-5-2-m21-v3-1-a12-tar) and it is smooth (just like previous Soulr-A11 twrp) but sideload did not work while the other recovery (TWRP.3.7.0_11.-.M215FXXU3CWB1.tar) by Dev Ravindu Deshan works great too but Reboot to Recovery does not work properly all the time, so sometimes instead of Reboot to Recovery the changes happen when manually reboot to recovery using usb cable also sometimes it does not recognise pen drive. Till now I only managed to boot Tuki1.2 and the other Lineage 20 zip had Oplist error 1 issue. Hoping for GSI boot too later. Thanks for recovery
Click to expand...
Click to collapse
I'm not the dev btw, @naz664 is

Fredin_ said:
I'm not the dev btw, @naz664 is
Click to expand...
Click to collapse
Hi Friend,
Naz Roms great also
sidetalk: Do you know how to unlock CWD1 Stock Rom bootloader? my bootloader isnt unlocked fully? And in Shaomi phones which model would you recommend, it has fastboot so.

OldNoobOne said:
Hi Friend,
Naz Roms great also
sidetalk: Do you know how to unlock CWD1 Stock Rom bootloader? my bootloader isnt unlocked fully? And in Shaomi phones which model would you recommend, it has fastboot so.
Click to expand...
Click to collapse
What do you mean by it's not fully unlocked? iirc the toggle stays like that once the bootloader is unlocked.

Fredin_ said:
What do you mean by it's not fully unlocked? iirc the toggle stays like that once the bootloader is unlocked.
Click to expand...
Click to collapse
Hi Friend,
When I had unlocked the bootloader of the same device while it had A11 loaded in it, the oem unlock button was TOTALLY GREYED OUT (I swear I'm not lying), I mean even the toggle button was greyed out but in above picture you can see toggle buttons are Blue color and oem-unlock toggle button is light-blue but not fully greyed out, I didnt relock my bootloader before flashing A13 Stock CWD1 update
Now I cant flash GSI they refuse to boot always stuck on bootlogo.

OldNoobOne said:
Hi Friend,
When I had unlocked the bootloader of the same device while it had A11 loaded in it, the oem unlock button was TOTALLY GREYED OUT (I swear I'm not lying), I mean even the toggle button was greyed out but in above picture you can see toggle buttons are Blue color and oem-unlock toggle button is light-blue but not fully greyed out, I didnt relock my bootloader before flashing A13 Stock CWD1 update
Now I cant flash GSI they refuse to boot always stuck on bootlogo.
Click to expand...
Click to collapse
Don't think there is any in between state. If you can flash stuff, your bootloader is unlocked. If the GSI is not booting, that's some other issue. Try the new AOSP ROMs instead.
A51 Builds by Royna - Browse Files at SourceForge.net
sourceforge.net

Fredin_ said:
Don't think there is any in between state. If you can flash stuff, your bootloader is unlocked. If the GSI is not booting, that's some other issue. Try the new AOSP ROMs instead.
A51 Builds by Royna - Browse Files at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
Thanks Friend,
It looks like Royna's ROM zips (Lineage 20 & evolution_m21-ota-tq2b.230505.005.a1-06050648-community-unsigned.zip & crDroidAndroid-13.0-20230427-m21-v9.4.zip) not flashing, reason - TWRP error : 1 Assert failed : update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list") and repartition issue even while sideloading. The only one that boots is TukiRom1.2, I havent tried Tuki1.3 yet. I tried Roynas' TWRP files too but after boot to recovery they get stuck, the other TWRP files (TWRP-3.5.2-m21-v3.1-A12.tar & TWRP.3.7.0_11.-.M215FXXU3CWB1.tar) boot and work with some issues though.