Database Develop

back to stock recovery

Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers

deepsnoozer said:
Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers
Click to expand...
Click to collapse
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app

87insane said:
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.

Superwitschi said:
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.
Click to expand...
Click to collapse
Only flash recovery.img with flashify?
Not flash recovery2.img?

yes only the recovery.img!!!!

Superwitschi said:
yes only the recovery.img!!!!
Click to expand...
Click to collapse
Ok thanks...

Dear all. Iam back to stock thabk you so much. Oh btw i used abd

deepsnoozer said:
Dear all. Iam back to stock thabk you so much. Oh btw i used abd
Click to expand...
Click to collapse
Mate, please describe how you did it with ADB in detailed

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
Standard doing....
Sent from my HUAWEI P7-L10 using XDA Free mobile app

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
The same way you have flashed TWRP.

DJ BlackEagle said:
The same way you have flashed TWRP.
Click to expand...
Click to collapse
Hi,
I need help... I'm trying to go back to stock recovery & firmware, I have already tried everything and I'm absolutely fustrated:crying::crying::crying:
1.- I had TWRP recovery and MIUI, the phone (ASCEND P7-L10) is rooted
2.- After downloading flashify and the stock recovery, I have installed the stock recovery, everything OK.
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
If I try to install any ROM B120, B126, B133, B135... I always get the same error, "cust fail"
If I reboot the phone still has MIUI... but I need to restore to factory recovery/firmware...
Help needed, I'm going to hit the roof...
thanks in advance!

Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.

siasegos said:
...
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
...
Click to expand...
Click to collapse
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.

Ziolek67 said:
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.
Click to expand...
Click to collapse
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help

siasegos said:
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2920167

Thanks, already flashed again recovery , boot and cust
Now forcing update vol+ vol- power
we'll see. Anyway, thanks a lot!

siasegos said:
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option)
I had many times this error while reverting my B135 after MIUI ROM.

Ziolek67 said:
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option) .
Click to expand...
Click to collapse
Well, after flashing again recovery, boot, cust and forcing an update... I get the same fuc**** error, mm... As you have told me, I guess I do not have the right files for my Vodafone Spain P7-L10
I'm going to look for the right firmware, thanks a lot!!!
==== SEVERAL ATTEMPS LATER AND SOME HOURS LATER... SOLVED!!! ====
I've made svarious attemps with diferent ROMs, B126 and B121, while I was downloading original stock ROM from Huawei.
All of these attemps have failed, even flashing cache, userdata and system
But after downloading original stock rom, as soon as I have flashed cust everything started to work perfectly, wipes... firmware...
So, THAAAAANKS A LOOOOOOOT!

Superwitschi said:
Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.
Click to expand...
Click to collapse
hi i have the same problem, if i put my 133 d load in my sd card, the phone go however in twrp...
there is a way to install d load or a firm stock from twrp?

I did it!
I've finally did it!
Huawei has released an official downgrade ROM (B603) here (russian site):
http://download-c.huawei.com/download/downloadCenter?downloadId=38601&version=66144&siteCode=ru
You'll also need this official EMUI 3.0 recovery image:
https://mega.co.nz/#!ZZ9QxIiL!Cn4mV2ZG2zzFc956CoWQh4BnBQqyK4rClghlY8CoXQk
As well as fastboot/ADB (platform tools) files here:
https://www.androidfilehost.com/?fid=9390355257214632011
Now here's how you do it.
Copy the dload folder (found in ROM) to the root of your SD Card
Now turn off your phone
While off press and hold Vol Down & Power Key, when screen turns on release Power Key, but keep holding the Vol Down key until you see a white screen (fastboot mode)
Now decompess files from platform tools to a new folder called ADB on your desktop for example
Hold down Shift and right click on ADB folder on your Desktop and choose "run command windows here", a little black window should pop up
Now type:
fastboot devices - this is to check if your phone is correctly detected (if not, then drivers are needed. Just install HiSuite)
fastboot flash recovery stockEMUI3.0RECOVERY.img
fastboot reboot
Your phone will now boot into your current OS. Go to Settings>Updates>Local Update
This will install the downgrade ROM from russian Huawei site (B603)
After this is installed your phone will boot into your current OS again. This time delete UPDATE.APP from dload folder and put your stock firmware in there.
Now repeat the process Settings>Update>Local Update
This time it will finally install that stock KitKat with EMUI 2.3 OMG !!! Finally !!!
God i hope i'll never have to do this again

[Tutorial] Convert Honor 6+ Chinese in European (only PE-TL10)

Today I bring new tutorial to completely convert the Honor 6 Plus Chinese in European. (It's only applicable for the model PE-TL10).
So we must have unlocked bootloader and root. If we meet these requirements, we can proceed with the conversion.
1. Download the latest European version (B571)
2. Create a folder called dload in the micro sd and introduce there the update.app
3. Download the European oeminfo here, unzip and move the oeminfo.img to internal memory.
4. Install the app termux or terminal emulator
5. Open the app and write "su" to get root permissions.
6. Later, write "dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo" and when it finished, turn off the Smartphone.
7. Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European.
Neither me or XDA we are not responsible for any misuse of the tutorial. I want to thank @foncubiert to try it
Original: http://www.htcmania.com/showthread.php?t=1228181

I was looking at it for 1 year, thank you very much. now google hello.

Is there "oeminfo.img" necessary to do the reverse of this process for install twrp old backup?
*** I need "oeminfo" file in China stock rom of China brand Honor 6 Plus Pe-TL10.
This file can be accessed "Srktool backup" or in "dev/block/platform/hi-mci.0/by-name/" . Thank you.

Is there a way to do this for the PE-UL00?
Inviato dal mio PE-UL00 utilizzando Tapatalk

Anyone tried it on PE-UL00 ?
Maybe there's a way to do the same.

Nice guide

Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)

100 % working, I converted my Chinese PE-TL10 to EU one. Thanks for sharing it!

does anyone know how to convert to C636 ??

RK0lb3 said:
Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)
Click to expand...
Click to collapse
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you

roger_50 said:
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you
Click to expand...
Click to collapse
news?

juanro49 said:
Today I bring new tutorial to completely convert the Honor 6 Plus Chinese in European. (It's only applicable for the model PE-TL10).
So we must have unlocked bootloader and root. If we meet these requirements, we can proceed with the conversion.
1. Download the latest European version (B571)
2. Create a folder called dload in the micro sd and introduce there the update.app
3. Download the European oeminfo here, unzip and move the oeminfo.img to internal memory.
4. Install the app termux or terminal emulator
5. Open the app and write "su" to get root permissions.
6. Later, write "dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo" and when it finished, turn off the Smartphone.
7. Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European.
Neither me or XDA we are not responsible for any misuse of the tutorial. I want to thank @foncubiert to try it
Original: http://www.htcmania.com/showthread.php?t=1228181
Click to expand...
Click to collapse
I will have succeeded in turning my smartphone PE-UL00 to PE-TL10.
https://forum.xda-developers.com/honor-6/general/pe-ul00-naw-pe-tl10-experience-t3570052 here, my experience.

RK0lb3 said:
Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)
Click to expand...
Click to collapse
Thanks, my PE-UL00 was converted to TL10 (VIA TWRP if u got any error, just facory reset and reboot and wait
edit.
how to make this phone work wwith dual sim ? i got only 1 sim and only 2g

Has someone tried to install it over PE-TL10V100R001CHNC00B260 build. Or it doesn't matter what is the previous version in the phone?

jhettler said:
Has someone tried to install it over PE-TL10V100R001CHNC00B260 build. Or it doesn't matter what is the previous version in the phone?
Click to expand...
Click to collapse
Hi guys,
self reply. I got through it. It was not completely without troubles, but finally I have Android 6.0 with EMUI 4.0.1 (build PE-TL10C432B571) in my PE-TL10 (originally on Android 4.4.2, EMUI 3.0, build PE-TL10V100R001CHNC00B260). I don't need a ROOT and custom recovery now so it is unrooted and stock recovery now.
First, I have never rooted Honor 6 PLUS and as it is not the newest device and it is not fully supported anymore by Honor MultiTool you have to use another way.
Bootloader has to be UNLOCKED - I used the MultiTool - it's fine and without any troubles
Device has to be ROOTED - that was a bit issue, because you have to flash custom recovery to be able to flash SuperSU and root the device. I did it via fastboot.
To enter the bootloader mode (fastboot) just switch off device, then hold Vol- and plug the USB cable - it should enter the bootloader mode - you should see the android robot and "phone UNLOCKED" indication.
Now you can use fastboot commands (you have to have proper drivers installed, you can find instructions on in another threads on XDA).
Or you can enter bootloader mode with command "adb reboot fastboot" - you have to be in the system (running Android) on the phone to run adb commands. It will restart your device and enter the bootloader mode after restarting.
Once you are in the bootloader mode with UNLOCKED bootloader you can flash custom recovery (necessary to flash SuperSU). I had to flash the proper custom recovery which I found here . I tried to flash another TWRP and CWM recoveries, but without success. You can flash the recovery with fastboot command "fastboot flash recovery CWM.img".
Then you can restart the device into the system with "fastboot reboot". Once you are in the system, you can reboot into recovery with command "adb reboot recovery".
In the recovery choose "install ZIP from ..." and choose this file. I had to choose the version BETA-SuperSU-v2.42.zip otherwise it didn't install anything despite the installation process was successful.
After the successful installation of SuperSU, you should have ROOTED device. You can check it for example with Root checker.
Then I mostly followed this tutorial. But with few modifcations.
I couldn't find this /dev/block/platform/hi_mci.0/by-name/oeminfo folder in my phone so I had to change the command for terminal emulator in the phone to dd if=/sdcard/oeminfo.img of=/dev/block/platform/ff1fe000.dwmmc0/by-name/oeminfo. There is another folder in "platform" folder but it doesn't contain "by-name" folder.
Then the tutorial says Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European, but the issue is, you can't enter the "download mode" after you installed custom recovery. It simply doesn't enter the "download mode" and it stays on the screen with honor logo.
It was necessary to get into the system to be able to use fastboot command to flash stock recovery. How to solve it. I could't enter the system anymore, but I could enter the CWM. So I wiped the data and cache through CWM (Vol+ and Power button) and I was able to enter the Android system again.
I used again the "fastboot flash recovery B250.img" and flashed this recovery. It didn't correspond with my build version B260, but it helped.
Then I restarted the phone, entered again the system and through "Settings - Updater - Menu - Local update" and choose the "UPDATE.APP" from "dload" folder (it should be automatically detected) and whoila, it should restart the device and load "download mode" and install the UPDATE.APP. You should be able to do this step with Vol+- Power button combination instead of doing it through "Settings menu". And that's all.
I rather added some of used files into the attachment

Hello there I have a Honor 6 plus PE-UL00 that i want to change to European rom from China variant. Its rooted Android 6 Marshmallow with custom recovery TWRP
Firmware PE-UL00C00561. I'm still a beginning t limited knowledge,. I've learnt what I could from the forums. anyhow..
As per the changing rom guide , I downloaded The European rom B571 update.app and placed it in sdcard DLOAD folder as well put the OEM.img on the hard drive and ran termux and entered the command as per the guide and it seemed to work.
The Next step says ton turn the phone off And then press the volume+/- and Power button.. and it will load into the system and install the rom.
As per The post above, i got up to that step and the phone would Just boot to menu then reset.. I was able to get in recovery mode via TWRP and ran my backup.
I've read Post that the PE.UL00 can be converted, but is it following the exact same way as the PE-TL10? Or I may be missing a step.
The above post encountered a similar issue and had success, but his was a PETL10 and had hise his own recovery.img. (250.img to access his system and update the rom. in that scenario would l try to flash my recovery.img to get back into the system and run the local update?
Lastly another person had commented about their success converting a PE-UL00 to European rom. But just mentioned that it was through TWRP. Would that be just a matter of one I've done the OEM.img boot back into recovery and installed the app through TwRp or must I do a full wipe First?
Sorry for rehashing an old thread.. any advice much appreciated.
.

I got it working. After the OEM. IMG update I tried flashing it through TWRP. After some trial and error, my power button isn't responsive sometimes so maybe i wasnt pressing the volume down/up power button combo correctly. As the phone would just biot to Honor screen and reset.
Eventually after a few reboots and tries it went into the emui screen download mode and success.. I think. I did lose root in the process. I'm unsure how, still a novice, but I was able to re root the phone install custom recover via. TWRP and install SuperSU.
Now I don't have to deal with those China apps

roger_50 said:
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you
Click to expand...
Click to collapse
I made it on my pe-ul00, it works for 100%.
It was a long time ago but as I remember, I installed b570 and after that update to b571.

semihy said:
I was looking at it for 1 year, thank you very much. now google hello.
Click to expand...
Click to collapse
May I know how did you rooted the chinese version device ?

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

Huawei eRecovery : "Getting package info failed". Honor 9 Lite

How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
When i reboot the phone it automatically brings me to eRecovery and when i "Download latest version and recovery" it says "Getting package info failed". Please help

OmaroOmaro said:
How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
Click to expand...
Click to collapse
Looks like you "played" a bit to much with your phone. There is no official TWRP yet and no official Firmware Image. So, this looks very bad for you to get out of this again.
Maybe try HiSuite from Huawei or MultiTool
https://forum.xda-developers.com/devdb/project/dl/?id=28734
Probably this could help as long as you can connect via ADB or HDB from HiSuite.
Good luck...

Hey, I've faced the exact same issue. After playing even a bit more, I manged to revert my device (LLD-L31) back to stock.
I've uploaded all the files I used, for you.
It passes SafetyNet check successullfy!
Download required files here
Here is was I did:
Format data using TWRP (Wipe -> Format data)
Enter fastboot mode (Connect to PC, power+ VolDown)
fastboot flash ramdisk ramdisk.emmc.win
fastboot flash kernel kernel.emmc.win
fastboot flash system SYSTEM.img
fastboot reboot
Click to expand...
Click to collapse
Please tell me, if it worked!
Note:
The SYSTEM.img is extracted from the UPDATE.APP from this site.
Kernel and ramdisk are from a LOS-15.1 TRWP backup. Not sure if they're required, but it didn't work for me without flashing them.

error while extracting update.app
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582

creativeanand said:
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582
Click to expand...
Click to collapse
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?

now my phone is looping
MateUserHHTT said:
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?
Click to expand...
Click to collapse
now my phone is looping on off, on of
and i can't go to fastboot

creativeanand said:
now my phone is looping on off, on of
and i can't go to fastboot
Click to expand...
Click to collapse
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.

MateUserHHTT said:
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.
Click to expand...
Click to collapse
after flash shall i wipe data/ factory reset?

creativeanand said:
after flash shall i wipe data/ factory reset?
Click to expand...
Click to collapse
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.

MateUserHHTT said:
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.
Click to expand...
Click to collapse
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping

creativeanand said:
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping
Click to expand...
Click to collapse
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306

MateUserHHTT said:
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
Click to expand...
Click to collapse
i did now?

creativeanand said:
i did now?
Click to expand...
Click to collapse
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!??

MateUserHHTT said:
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!
Click to expand...
Click to collapse
i did as you said .. now phone is not starting stoped at huawei eRecovery
whan i go to twrp phone reboots itshalf after 10sec

If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt

Doesn't Android use FBE by default since Android O, so the data is always encrypted no matter what TWRP was used?

JamesBott said:
If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt
Click to expand...
Click to collapse
sir shall i go to service center i have warrenty

creativeanand said:
sir shall i go to service center i have warrenty
Click to expand...
Click to collapse
By unlocking the bootloader you've void your warranty.
They will probably charge you for the repair.
What happens if you install this version of TWRP?
It's on Chinese, click the little icon in the top right corner and select "English".
If it doesn't crash, try this one.
Make sure to follow the correct steps for flashing.
fastboot flash recovery_ramdisk [filename.img]
fastboot flash reboot
QUICKLY unplug USB and before it fully reboots, hold press Volume up key
If it fails, check out this guide:
https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563

My hon or 9 lite is in teaming page and it won't open I have tried to update via erecOvery but it won't work and I cannot go to recovery mode please help me.

@Prabin99
what you build ?
what have you do before start the update ?
have you anything flashed ?

(Help) My P8 Lite 2017 (PRA-LX1) is bricked

Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated

luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.

If your phone is really hard bricked and can't do anything, check this out:

I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?

luigifan3 said:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
Click to expand...
Click to collapse
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.

dinoderda said:
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
Click to expand...
Click to collapse
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?

luigifan3 said:
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
Click to expand...
Click to collapse
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.

dinoderda said:
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
Click to expand...
Click to collapse
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?

luigifan3 said:
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
Click to expand...
Click to collapse
Volume Up + Volume Down + Power Button.

dinoderda said:
Volume Up + Volume Down + Power Button.
Click to expand...
Click to collapse
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed

luigifan3 said:
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
Click to expand...
Click to collapse
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.

luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device

RAR1991 said:
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
Click to expand...
Click to collapse
Ok, but does it provide the right info if I have flashed different oeminfo.img?

dinoderda said:
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
Click to expand...
Click to collapse
I've tried a different firmware for my device and now I can't get to dload anymore so does it mean that I've chosen the wrong firmware? And by the way I read somewhere that if the dload says error it can depend on the microsd card.

I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked

luigifan3 said:
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
Click to expand...
Click to collapse
great

I was stuck with a similar problem. Device bricked and flashing TWRP and restoring backups, then stock recovery and stock roms, but nothing worked until I found this post. Thanks a lot dinoderda for your help.

dinoderda said:
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
Click to expand...
Click to collapse
Hello again, I've been using the older service firmware for few months now and now I decided to install the latest service firmware after I had no success with flashing the firmware through TWRP and I downloaded the service firmware put the necessary files to the dload folder and installed it via the software update in the dialer and typing *#*#2846579#*#* and going to dload that way. It installed to 100% and then when it restarted it goes to Error Mode and it says to update the firmware again but it just loops to error mode and I cannot do anything so I think I accidentally removed some neccessary files in the dload folder but now I would need to fix the error mode loop.