Microsoft has a diagnostic tool DevHealth.exe (sorry, I cannot publish it).
Here is the output on BA:
Code:
<Perf Gates>
<Gate Name=Memory>73351168</Gate>
<Gate Name=Storage>53208064</Gate>
</Perf Gates>
Bootup Time Markers (Milliseconds):
Calupd: Exiting = 54682
Initialized appt ssupdate = 54667
Initialized msgcount ssupdate = 54340
SSUpdate: Thread now in message loop = 54209
Calupd: Starting = 53221
SSUpdate: Shell Ready = 53089
System Memory Report
====================
Page Size: 4096
| Pages | Size (bytes) | Size (MB) | Address
Total Storage (Flash) | 15436 | 63228928 | 60.30 | n/a
Available Storage | 12990 | 53208064 | 50.74 | n/a
Used Storage | 2446 | 10020864 | 9.56 | n/a
Physical RAM (sources breakdown) | 24080 | 98631680 | 94.06 | n/a
Main Memory | 24080 | 98631680 | 94.06 | 0x901f0000 - 0x95ffffff
Physical RAM (consumers breakdown) | 24080 | 98631680 | 94.06 | n/a
Kernel Prealloc. | 139 | 569344 | 0.54 | 0x901f0000 - 0x9027afff
Paging Pool | 514 | 2105344 | 2.01 | 0x9027b000 - 0x9047cfff
Kernel RAM Map | 1 | 4096 | 0.00 | 0x9047d000 - 0x9047dfff
Watson Size | 75 | 307200 | 0.29 | 0x95fb5000 - 0x95ffffff
Overhead | 6 | 24576 | 0.02 | n/a
Object Store | 8 | 32768 | 0.03 | n/a
Program Memory | 23337 | 95588352 | 91.16 | n/a
AVAILABLE PROGRAM MEMORY | 17860 | 73154560 | 69.77 | n/a
USED PROGRAM MEMORY | 5477 | 22433792 | 21.39 | n/a
Kernel Objects | 406 | 1662976 | 1.59 | n/a
Misc | 138 | 565248 | 0.54 | n/a
Programs | 4933 | 20205568 | 19.27 | n/a
(S) Stack | 405 | 1658880 | 1.58 | n/a
(H) Heap | 2149 | 8802304 | 8.39 | n/a
(E) EXE Data | 109 | 446464 | 0.43 | n/a
(D) DLL Data | 699 | 2863104 | 2.73 | n/a
(c) Code RAM | 631 | 2584576 | 2.46 | n/a
Process | 208 | 851968 | 0.81 | n/a
Module | 423 | 1732608 | 1.65 | n/a
(r) Read only RAM | 153 | 626688 | 0.60 | n/a
Process | 60 | 245760 | 0.23 | n/a
Module | 47 | 192512 | 0.18 | n/a
Map/Shared | 46 | 188416 | 0.18 | n/a
(W) Read/Write RAM | 787 | 3223552 | 3.07 | n/a
Process | 429 | 1757184 | 1.68 | n/a
Module | 0 | 0 | 0.00 | n/a
Map/Shared | 358 | 1466368 | 1.40 | n/a
Look at the "Paging Pool" line, it is only 2.01 Mb. On HTC Universal it is 4.8 Mb, on one of the DELLs it is 8 mb.
The large the paging pool is, the more code pages can present in RAM simultaneously -> the less loads from slow ROM -> the faster the device is.
BA has 128 Mb RAM, so we can increase it safely to 8Mb (larger value would not give noticeable improvements).
One note - I don't know the addresses to patch in ROM, so someone should find how to increase pool size.
The true GURU is back!
its really Nice to see u again mamaich!... hopes u can help us here in BA...
Another step forward .. thanks to all of you guys.
mamaich
Were you able to get your hands on nkDebugX (available as a powertoy)?
ok
how to increase pool size ? :evil: :twisted:
MDAIIIUser said:
Were you able to get your hands on nkDebugX (available as a powertoy)?
Click to expand...
Click to collapse
I never heard about this tool.
Regarding paging pool size:
Code:
0000437056: 28 A0 1F 80 FF FF FF FF │ FF FF FF FF 9B 4F FF FF (а А ЫO
0000437066: 64 B0 00 00 64 00 00 00 │ 08 DF 1F 80 00 00 20 00 d░ d ▀ А
0000437076: 00 00 00 00 C4 6B 1D 80 │ 50 C0 1D 80 9C F0 1C 80 ─k АP└ АЬЁ А
At address 0437072 of NK.NBA you see 00 00 20 00. Try to increase the value to 00 00 80 00 (it would increase pool to 8 mb). If this works - you'll see the noticeable speedup during boot process, and the RAM amount displayed in "memory" CPL applet would decrease by 6 Mb.
You may play with higher/lower values, 8 Mb should be enough in most cases. But BA has lots of RAM, so you may try 16Mb.
But the device may fail to boot. In this case connect KITL and tell me the error message, it is possible that some other addresses should be also changed (or maybe I've found an invalid address, I was looking in Universal's ROM).
I edited nk.nba as you advised and flashed my BA with edited Helmi 1.3.1 ROM.
Super fast!!!!!
It works!!!!!!
Thanks GURU mamaich!!!!
And RAM is reduced 6 MB as you mentioned.
From 91.16 to 85.14 MB.
Image attached
mamaich said:
MDAIIIUser said:
Were you able to get your hands on nkDebugX (available as a powertoy)?
Click to expand...
Click to collapse
I never heard about this tool.
Regarding paging pool size:
Code:
0000437056: 28 A0 1F 80 FF FF FF FF │ FF FF FF FF 9B 4F FF FF (а А ЫO
0000437066: 64 B0 00 00 64 00 00 00 │ 08 DF 1F 80 00 00 20 00 d░ d ▀ А
0000437076: 00 00 00 00 C4 6B 1D 80 │ 50 C0 1D 80 9C F0 1C 80 ─k АP└ АЬЁ А
At address 0437072 of NK.NBA you see 00 00 20 00. Try to increase the value to 00 00 80 00 (it would increase pool to 8 mb). If this works - you'll see the noticeable speedup during boot process, and the RAM amount displayed in "memory" CPL applet would decrease by 6 Mb.
You may play with higher/lower values, 8 Mb should be enough in most cases. But BA has lots of RAM, so you may try 16Mb.
But the device may fail to boot. In this case connect KITL and tell me the error message, it is possible that some other addresses should be also changed (or maybe I've found an invalid address, I was looking in Universal's ROM).
Click to expand...
Click to collapse
Mamaich... U're still the best in everything!!! its work like a charm...thanks Mamaich..
In my rom, its make faster just like wm2003... :wink:
helmi_c said:
Mamaich... U're still the best in everything!!! its work like a charm...thanks Mamaich..
In my rom, its make faster just like wm2003... :wink:
Click to expand...
Click to collapse
Hey Helmi
I agree with you.
Mamaich is GURU.
And you too.
Thanks all.
Hope you will release a new ROM with this patch soon.
:wink:
Future WM5 releases -
Is it safe to say future releases will include this larger pooling system for BA?
btw 9-14 is my bday...hrmm I wish for a better BA globally! :twisted:
mamaich said:
At address 0437072 of NK.NBA you see 00 00 20 00. Try to increase the value to 00 00 80 00 (it would increase pool to 8 mb). If this works - you'll see the noticeable speedup during boot process, and the RAM amount displayed in "memory" CPL applet would decrease by 6 Mb.
You may play with higher/lower values, 8 Mb should be enough in most cases. But BA has lots of RAM, so you may try 16Mb.
But the device may fail to boot. In this case connect KITL and tell me the error message, it is possible that some other addresses should be also changed (or maybe I've found an invalid address, I was looking in Universal's ROM).
Click to expand...
Click to collapse
Thanks Mamaich, My Rom is very fast
helmi_c said:
mamaich said:
MDAIIIUser said:
Were you able to get your hands on nkDebugX (available as a powertoy)?
Click to expand...
Click to collapse
I never heard about this tool.
Regarding paging pool size:
Code:
0000437056: 28 A0 1F 80 FF FF FF FF │ FF FF FF FF 9B 4F FF FF (а А ЫO
0000437066: 64 B0 00 00 64 00 00 00 │ 08 DF 1F 80 00 00 20 00 d░ d ▀ А
0000437076: 00 00 00 00 C4 6B 1D 80 │ 50 C0 1D 80 9C F0 1C 80 ─k АP└ АЬЁ А
At address 0437072 of NK.NBA you see 00 00 20 00. Try to increase the value to 00 00 80 00 (it would increase pool to 8 mb). If this works - you'll see the noticeable speedup during boot process, and the RAM amount displayed in "memory" CPL applet would decrease by 6 Mb.
You may play with higher/lower values, 8 Mb should be enough in most cases. But BA has lots of RAM, so you may try 16Mb.
But the device may fail to boot. In this case connect KITL and tell me the error message, it is possible that some other addresses should be also changed (or maybe I've found an invalid address, I was looking in Universal's ROM).
Click to expand...
Click to collapse
Mamaich... U're still the best in everything!!! its work like a charm...thanks Mamaich..
In my rom, its make faster just like wm2003... :wink:
Click to expand...
Click to collapse
What tool/editor you used to edit the rom?
Thanks!
mamaich said:
At address 0437072 of NK.NBA you see 00 00 20 00. Try to increase the value to 00 00 80 00 (it would increase pool to 8 mb)
...................................
You may play with higher/lower values, 8 Mb should be enough in most cases. But BA has lots of RAM, so you may try 16Mb.
Click to expand...
Click to collapse
Mamaich,
How to edit to 16 MB.
I will try to do.
Since it's hexadecimal, it sounds logical to me that you would replace the "8" (or "2") by "F" which is the equalent of 16 in hex.
Or is this too simple?
GerardNL said:
Since it's hexadecimal, it sounds logical to me that you would replace the "8" (or "2") by "F" which is the equalent of 16 in hex.
Or is this too simple?
Click to expand...
Click to collapse
0xF is 15 and not 16
you should change 00 00 20 00 to 00 00 00 01
These are hexadecimal values with the reverse order of bytes: 0x200000 (2097152) in the first case and 0x1000000 (16777216) in the second.
I don't think that there would be noticeable improvement when changing 8 to 16 Mb.
Thz all
i test it very fast this first time to fast like this thz somuch
mamaich said:
you should change 00 00 20 00 to 00 00 00 01
These are hexadecimal values with the reverse order of bytes: 0x200000 (2097152) in the first case and 0x1000000 (16777216) in the second.
I don't think that there would be noticeable improvement when changing 8 to 16 Mb.
Click to expand...
Click to collapse
Thankssssss mamaich.
Will have a try when have time.
But now it is very fast with 8 MB.
So impressive. :wink:
Is there a cab file patch that can acomplish this miracle or can it only be done by creating a new ROM? I have yet to try creating a ROM as I am too chicken to try..... :-( (afraid of winding up with an expensive paperweight)
motisu said:
Is there a cab file patch that can acomplish this miracle or can it only be done by creating a new ROM? I have yet to try creating a ROM as I am too chicken to try..... :-( (afraid of winding up with an expensive paperweight)
Click to expand...
Click to collapse
This cannot be done via CAB.
Hello
what is the negative wire to connect the car to watch the video when the car is moving.
Thank you for your help
Number model: S07
Versio MCU: MTCB KLD2 V2.77 aug 26 2015
Version android: 4.4.4 10082015
Kernel version 3.0.36+ @ chun roo-book # 817
Build Number: RK3188 eng 4.4.4 10082015
CPU: 1.6 GHz armv7 (X4)
Memory: 1024 MB
ango81 said:
Hello
what is the negative wire to connect the car to watch the video when the car is moving.
Thank you for your help
Number model: S07
Versio MCU: MTCB KLD2 V2.77 aug 26 2015
Version android: 4.4.4 10082015
Kernel version 3.0.36+ @ chun roo-book # 817
Build Number: RK3188 eng 4.4.4 10082015
CPU: 1.6 GHz armv7 (X4)
Memory: 1024 MB
Click to expand...
Click to collapse
Leave the wire open. Go into settings and turn on watch video when driving. Settings/driving settings.
Hello
thank you it works very well
You are in the wrong forum section...
Correct:
http://forum.xda-developers.com/android-auto/mtcb-android-head-units-qa
Hello people have a question have this autoradio with android 4.4.2 from the company Allwinner that is Allwinner T3_P1 model gerootet and busybox is also installed but I do not find any Rome I will times list with the specficationen and would ask you to clarify
ERNEL: Linux version 3.10.65 ([email protected]) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #203 SMP PREEMPT Wed Aug 10 00:26:03 CST 2016
CODENAME: REL
Mainboard: exdroid
BRAND: Allwinner
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: t3-p1
DISPLAY: t3_p1-eng 4.4.2 KOT49H 20160810 test-keys
FINGERPRINT: Allwinner/t3_p1/t3-p1:4.4.2/KOT49H/20160810:eng/test-keys
HARDWARE: sun8iw11p1
ID: KOT49H
TAGS: test-keys
General Specifications
Manufacturer Allwinner
Model t3
Android version 4.4.2; 20160810; SDK19
CPU 4 cores; rev 5 (v7l) t3; Max: 1200,0 MHz; Min: 480,0 MHz
Display 800 x 480; DPI: 240; Evaluated Size: 3,9"
Touch screen NOT multitouch 1 point
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB
Flash 0.125 GB; 16 GB (14.924 GB actual) (see memory map tab)
Communications
Phone None
WiFi 8188eu; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB Host Yes
Bluetooth Yes
GPS Yes
How did you root this device? No one succeeded rooting it.
Did you manage to find a suitable ROM for this device? Not only that i couldn't find a suitable rom, or even a way to flash it, but also unable to root after numerous tries with different version of kingroot, kingoroot, baidu root.
I have an AT&T Galaxy Tab E (SM-T377A) and I need to root it, but I haven't been able to find any guides or .tar files to flash. I have found guides for the sprint version (SM-T377P), but I'm afraid that will screw something up if I try it.
Is it even possible?
Thanks for the help.
https://forum.xda-developers.com/galaxy-tab/help/question-tab-e-att-sma-6-0-1-mm-root-t3578171
Same question I'm assuming the AT&T (A) and T-mobile (T) variants are Exynos CPU while the Sprint (P) is Qualcomm. We need a confirmation of a root method.
SM-T377A Hardware / Software Details From "Phone Info" App
Here is all the info from my AT&T Samsung Galaxy Tab E 8.0 that I just received today (brand new and shipped from AT&T).
Manufacturer / Brand: samsung
Phone Model: SAMSUNG-SM-T377A
Device Type: gteslteatt
Product Name: gteslteuc
Country of Origin: MADE IN VIETNAM
Manufacturing Date: 2017.05.23
Knox Warrant Void: 0x0
Colour / Internal Storage: Black / 16 GB
Product Code: SM-T377AZKAATT
Original CSC Code:
Firmware's CSC Code: ATT
Active CSC Code: ATT
Available CSC Codes:
CSC Country: USA / US
Mobile Operator: AT&T / 310410
Bootloader Version: T377AUCU2APJ2
PDA Version: T377AUCU2APJ2
CSC Version: T377AATT2APJ2
Baseband Version: T377AUCU2APJ2
Latest Firmware: Not Found
Kernel Version: 3.10.9-8864257 [email protected] #1 32-bit
Java Virtual Machine: ART 2.1.0
Root Existence: No
Android Version: 6.0.1
Build Number: MMB29K.T377AUCU2APJ2
Build Fingerprint: samsung/gteslteuc/gteslteatt:6.0.1/MMB29K/T377AUCU2APJ2:user/release-keys
Build Description: gteslteuc-user 6.0.1 MMB29K T377AUCU2APJ2 release-keys
Build Date: Mon Oct 17 18:03:29 KST 2016
Changelist: 8864257
Hardware / Board: universal3475 [32-bit]
Platform / Chip: exynos3 / exynos3475
GPU (Graphics Processing Unit): ARM Mali-T720
Modem Board: SHANNON308
Hardware Revision: REV0.3
Total RAM: 1.36 GB
Screen: 7.96 inches, 1280 x 800 pixels, 189 ppi, 213 dpi
Sound Card: Universal3475-I2S
Camera (Rear): 5MP / SLSI_S5K4EC_FIMC_IS
Camera (Front): 1.9MP / DB_DB8221A_FIMC_IS
Sensors: K2HH Acceleration (Accelerometer) - STM, SX9500 Grip Sensor - SEMTECH, SX9500 Grip Sensor for wifi - SEMTECH, Screen Orientation Sensor - Samsung Electronics
Hello guys, i need help with china music...
I have such a radio
ANDROID YT9216B_00002_V004_20190729
SYSTEM : 9.1 XYAUTO: 3,0 (8227L) CAN BUS: 3;0 (8227L)
DDR:4G RASH: 32G cpu: A71.3GHz x 4
DISPLAY 1024*600
MCU1: 3.1 (8227L)
i think this fake.
but i have good prog - AIDA
and that's what she showed
android 8.1 GO
API 23
Android id 343e65327412ca49b
ID assembly YT9216B_00002_V004_20190729
ID MRA58K
version core 3.18.12 ([email protected]) (gcc version 4.8 (GCC)) #5 SMR PREEMPT Mon Jul 29 11 14:39 2019
manufacturer alps
model 8227L_demo
equipment ac8227l
platform ac8227L
product full_8227L_demo
4xARM Cortex A7 @ 1118Mhz
32bit ARMv7