I have type C hub which have micro sd , sd , usb(for storage OTG) and micro usb slot for charging. It dont charge phone via micro usb cable if I use any storage device with it. but if i only put micro usb cable it charges. is there any mode which can tweak phone to do both ? my device is rooted and with RR os.
up anyone here xda member have tried ?
Everything seems to be pointing to the fact that charging and OTG doesn't work at the same time on Oneplus 3/3t and 5/5t. There's powered OTG cables, but these only power the external device and not the phone.
Related
Hi,
Is there any way to read a memory card from the TD's mini USB port. I have a small device that has a mini USB on one end and a USB on the other, inside this there is a micro sd card (I have pulled this out slightly, to show where it is). I can charge my TD with this device and I can see the memory card via normas USB but can't access the memory card from my TD, any ideas??
Thanks
The diamond does not have any USB host drivers, except in the bootloader, so it won't work.
Can we use otg adapter with nexus s, to directly connect pen drive to nexus and then use it as external mass storage?
no, must be additional power supply
Read more here
You need a Y cable using either the charger or a battery pack to provide power.
when looking at the storage control panel, it lists internal, sdcard-ext, and then "/mnt/usbdisk_1.1.1" and says "insert an [sic] USB disk for mounting".
so if i were to come up with some sort of adapter, could i plug a thumb drive into my phone's micro usb port to move files between the phone and the thumb drive? i can think of plenty of times that would be useful!
Tried. OTG cable works with Samsung galaxy S2 devices (Skyrocket using either SKY ICS or rooted OTA) but haven't got it to work on our Droids...(Bionic ICS leak, RAZR ICS OTA, Droid 4 ICS OTA...all rooted).
But if someone can prove me wrong I'd be happy to "eat my words" ...
Be strong and very Koragus, my ninja...
OTG works, BUT only in a very cumbersome way, since external power is needed.
A powered USB hub does not suffice, since it only powers the slave devices, not the host (= phone). The phone must be in charge-mode, which requires a Y-cable.
You need:
- an OTG adapter
- a USB hub with mini-USB in
- a USB Y cable with 2 normal USB plugs and one mini-USB out
Then
1. Connect the OTG adapter to your phone's micro-USB input
2. Connect the 'middle' USB plug of the USB Y cable into the OTG adapter
3. Connect the 'outer' USB plug of the USB Y cable to a charger (can be a portable battery as well)
4. Connect the mini-USB plug of the USB Y cable to the hub output
5. Connect any device you want to use to the USB hub
It looks like this (found this picture for Razr):
http://www.flickr.com/photos/teppan_hakushaku/6817735705/
Edit: I verified it for Droid 4 last week, but didn't take my own picture yet. Works with ICS .215 leak, no 3rd party apps (like 'StickMount') seem to be needed.
Edit2: According to some other posts in this forums (search for 'OTG') it will only work for FAT32 formatted drives. Didn't check this in detail but my drive was already FAT32. Also I found it did not work for my cheap wireless keyboard's USB dongle, but connecting a wired keyboard worked fine.
...reminded again why I love this community...
...no possible links to a purchase of this "y" cable?
Be strong and very Koragus, my ninja...
Glad I could help!
They come with some portable harddisks, so that's where I got mine. Not sure about the linking policy on XDA, please remove if not allowed. Here's an example:
http://www.dealextreme.com/p/usb-2-0-mini-5-pin-to-a-male-power-y-cable-62-cm-65630?item=10
Anyone got one of these?/will it work?
Yes, I have a USB OTG cable and it works for low power USB drives.
Basically I decided to use my 1TB exFAT formatted HDD with my Z3C. I have a OTG cable and if the power supplied isnt enough I can hook up my external battery via the magnetic charging port on the side. However, when I connect it, the HDD fails to spin up and I can't mount it. Will I need to root the phone in order to mount it with an app or is there some kind of problem with the set-up.
Info
Tiansili said:
Basically I decided to use my 1TB exFAT formatted HDD with my Z3C. I have a OTG cable and if the power supplied isnt enough I can hook up my external battery via the magnetic charging port on the side. However, when I connect it, the HDD fails to spin up and I can't mount it. Will I need to root the phone in order to mount it with an app or is there some kind of problem with the set-up.
Click to expand...
Click to collapse
you should connect hdd itself to power not additional battery for Xperia phone
:good:
Tiansili said:
Basically I decided to use my 1TB exFAT formatted HDD with my Z3C. I have a OTG cable and if the power supplied isnt enough I can hook up my external battery via the magnetic charging port on the side. However, when I connect it, the HDD fails to spin up and I can't mount it. Will I need to root the phone in order to mount it with an app or is there some kind of problem with the set-up.
Click to expand...
Click to collapse
You should be using a powered USB OTG cable or putting a powered USB hub to use any higher draw device like a HDD from a phone.