Database Develop

Cricket S6 Official Odin Tar files

Once again keepin up the magic. here's the stock files for the Cricket S6 so now you can go bug the developer of pingpong root to include support for your phone.
G920AZTUU1AOD1
LINK

Sunderwear said:
Once again keepin up the magic. here's the stock files for the Cricket S6 so now you can go bug the developer of pingpong root to include support for your phone.
G920AZTUU1AOD1
LINK
Click to expand...
Click to collapse
Thanks again!
Sent from my SAMSUNG-SM-G920AZ

im sorry but im a noob, these odin files are basically the stock firmware used to 'un root' our phone correct?
i bought the cricket version of the S6 but am i correct in assuming we arent getting any OTAs ?

Chris_GTR1 said:
im sorry but im a noob, these odin files are basically the stock firmware used to 'un root' our phone correct?
i bought the cricket version of the S6 but am i correct in assuming we arent getting any OTAs ?
Click to expand...
Click to collapse
yes use to unroot

Is the Cricket version ROM better in any way than the AT&T version? Maybe much less bloat? AT&T's crap is just ridiculous.
Does this flash on AT&T version too? I might go to Cricket after a month or two as AT&T is just too expensive.

hp79 said:
Is the Cricket version ROM better in any way than the AT&T version? Maybe much less bloat? AT&T's crap is just ridiculous.
Does this flash on AT&T version too? I might go to Cricket after a month or two as AT&T is just too expensive.
Click to expand...
Click to collapse
I don't know if its any better but I can confirm it doesn't have all the ATT bloatware which is a plus.
I just flashed this to an AT&T S6 using odin and it flashed fine and seems to be working great.
Device Status: Official
Update: I can also confirm that I was able to root with pingpong root with this rom

netspec said:
I don't know if its any better but I can confirm it doesn't have all the ATT bloatware which is a plus.
I just flashed this to an AT&T S6 using odin and it flashed fine and seems to be working great.
Device Status: Official
Update: I can also confirm that I was able to root with pingpong root with this rom
Click to expand...
Click to collapse
Thanks for the update. I have AOE2 version right now with most bloat removed, but the phone feels it's slower than before. Opening task switcher takes about 1 second to load up. Of course the battery life is better and doesn't heat up as much as the pre-AOE2 version. I didn't try the Cricket ROM, but I may try it in the future.
Doesn't Cricket lack voice over LTE though?

since we have the cricket version , im pretty sure were not getting android M update seeing as s5 and s4 still haven't gotten the lollipop OTAs on cricket. any way around it or maybe we can just flash the international 5.2 version?

Chris_GTR1 said:
since we have the cricket version , im pretty sure were not getting android M update seeing as s5 and s4 still haven't gotten the lollipop OTAs on cricket. any way around it or maybe we can just flash the international 5.2 version?
Click to expand...
Click to collapse
Don't know about the International S6 firmware but you should be able to Odin the ATT tar once it comes out
Sent from my SAMSUNG-SM-G920AZ

daniel4653 said:
Don't know about the International S6 firmware but you should be able to Odin the ATT tar once it comes out
Sent from my SAMSUNG-SM-G920AZ
Click to expand...
Click to collapse
Have you tried it? I'm getting a Cricket S6, but it's unlocked, and I'm using it on AT&T, and I'm considering trying this.

I have a g920i that I am using on cricket. Does anyone know if this odin will flash on that model?

Thank you for this, my phone is up and running again after about a week of it being bricked. I only have 2 issues. First, my galaxy is not recognizing my sim card.. second, I get this pop up saying "unfortunately, IMS Service has stopped" which pops up every second or 2. My phone is basically unusable, ive tried reflashing stock firmware again and it just comes up again. Can anyone help? Thanks in advance

LiquidPhoenix said:
Thank you for this, my phone is up and running again after about a week of it being bricked. I only have 2 issues. First, my galaxy is not recognizing my sim card.. second, I get this pop up saying "unfortunately, IMS Service has stopped" which pops up every second or 2. My phone is basically unusable, ive tried reflashing stock firmware again and it just comes up again. Can anyone help? Thanks in advance
Click to expand...
Click to collapse
Have you tried to factory wipe the phone ?
Sent from my SAMSUNG-SM-G920AZ

Yes and ive also wiped cache partition. I have no clue what to do

daniel4653 said:
Have you tried to factory wipe the phone ?
Sent from my SAMSUNG-SM-G920AZ
Click to expand...
Click to collapse
Yes and ive also wiped cache partition. Other suggestions???

Could installing the Cricket bootloader on the AT&T variant unlock it like the Cricket version?
Also: Does anyone know if it is possible to install the AT&T G920A or Cricket G920AZ firmware to an AT&T G925A edge version? Basically, if you don't care to have the edge functionality would it work?
I found my answer to the second part:
http://forum.xda-developers.com/att-galaxy-s6-edge/help/s6-roms-s6-edge-t3132552

Sunderwear said:
Once again keepin up the magic. here's the stock files for the Cricket S6 so now you can go bug the developer of pingpong root to include support for your phone.
G920AZTUU1AOD1
LINK
Click to expand...
Click to collapse
Ok so just double checking... which file are you supposed to run and open in Odin? Isnt it the AP file?

There is an update from 7-15-15. The newest firmware is: G920AZTUU2AOF3
Has anyone taken the update?
Description: 129.10MB
-Find My Mobile and Reactivation Lock enhancements
-Android OS security enhancements

If I'm not mistaken, isn't the OF3 update, the one that does not have root? And there is currently no way to downgrade after taking it?

lokofly said:
If I'm not mistaken, isn't the OF3 update, the one that does not have root? And there is currently no way to downgrade after taking it?
Click to expand...
Click to collapse
I am not sure. I haven't tried it to see. I'm actually running Xtrestolite right now on my G920AZ. I ended up having to flash back to stock at one point and noticed the update.
There is probably a difference between the G920A update and the G920AZ one that I was referring to.

[J700T1] [MetroPCS] [Stock Rom] J700T1UVU3AQC3

THIS IS FOR SAMSUNG GALAXY J7 METRO PCS VERSION. DO NOT FLASH ON OTHER VARIANTS.​
If you have messed up your system while trying to root and need J700T1UVU3AQC3 firmware to recover, or if you just need to upgrade to the latest firmware, here is the official unmodified Rom:
Download link:
https://mega.nz/#!ltcgwYLZ!R0n3FyaDUCtY8yiMrppFpbxNaSHnjiSUZSMQiU_o-kk
1- The firmware is on Mega servers. Please use a PC to download. If you have to use your mobile device to download, use the Mega app or set your browser to "desktop".
2- The firmware files are zipped. They should be unzipped and flashed via Odin.
3- This version upgrades the bootloader version to 3 and therefore downgrading to previous versions becomes impossible. So if you are happy with your current firmware and you think you may change your mind after the upgrade, stay away from this.
3- Rooting this firmware is possible through flashing TWRP via Odin and then superSU via TWRP. As I am sure you are well aware, that process will trip your Knox flag and renders your warranty void.
4- As usual, I share this with you AS IS and I have no responsibility if it breaks your phone. USE IT AT YOUR OWN RISK.

twrp for j7
which version of twrp works

Drsmit3 said:
which version of twrp works
Click to expand...
Click to collapse
This is not for twrp. Please read the OP:
Quote:
2- The firmware files are zipped. They should be unzipped and flashed via Odin.

3- This version upgrades the bootloader version to 3 and therefore downgrading to previous versions becomes impossible.
I was having network problems..calls kept disconnecting and phone would freeze. I restored my twrp backup with no issues.

need root for this j700t or t1 qc3 , please help tnx

mr64fixit said:
need root for this j700t or t1 qc3 , please help tnx
Click to expand...
Click to collapse
Just download SuperSU, newest 2.82. flash via recovery, there u are rooted.

Are the TMo and Metro devices interchangeable yet? In other words a Tmo sim in a Metropcs phone and vice versa?

TabascoTX said:
Are the TMo and Metro devices interchangeable yet? In other words a Tmo sim in a Metropcs phone and vice versa?
Click to expand...
Click to collapse
Think u have to sim unlock it first.
---------- Post added at 05:14 PM ---------- Previous post was at 05:12 PM ----------
Don't flash this firmware on a t mobile phone though.it will kill your modem and efs

Ok, not to sound like a noob,(I don't deal with Samsung's usually). What are ef's again?

TabascoTX said:
Ok, not to sound like a noob,(I don't deal with Samsung's usually). What are ef's again?
Click to expand...
Click to collapse
It's your encrypting file system.its where your imei is stored and other super important stuff and unique to your specific phone's serial number alone. And tethered to your carriers signal

fullofhell said:
It's your encrypting file system.its where your imei is stored and other super important stuff and unique to your specific phone's serial number alone. And tethered to your carriers signal
Click to expand...
Click to collapse
The EFS stuff really scares me when it comes to flashing. With that said. Where can i download the latest rom for metropcs. Sammobile only appears to have T-Mobile from the last time i checked. Does not hurt to have it at hand just in case.
Sent from my SM-J700T1 using Tapatalk

DroidJP said:
The EFS stuff really scares me when it comes to flashing. With that said. Where can i download the latest rom for metropcs. Sammobile only appears to have T-Mobile from the last time i checked. Does not hurt to have it at hand just in case.
Click to expand...
Click to collapse
Download updato app on play store. U can find all firmwares..or if u have any old firmwares laying around flash it and then take an OTA update then fomat and make a backup of it

fullofhell said:
Download updato app on play store. U can find all firmwares..or if u have any old firmwares laying around flash it and then take an OTA update then fomat and make a backup of it
Click to expand...
Click to collapse
No firmware at hand but updato, wow it identified my phone and found my firmware in matter of seconds. And to be sure. TMK is Metro correct?
Sent from my SM-J700T1 using Tapatalk

DroidJP said:
No firmware at hand but updato, wow it identified my phone and found my firmware in matter of seconds. And to be sure. TMK is Metro correct?
Click to expand...
Click to collapse
I'm not sure on that man look up some other firmwares for metro just to kinda compare..I don't want to steer u wrong. But updato saved me so much stress and time.

Yup, it's the correct one lol.
Sent from my SM-J700T1 using Tapatalk

Hey guys. Are any of you experiencing random reboots on the latest firmware? My phone randomly reboots for no reason. It has done this several times and the 2 times i can remember was 1. Phone rebooted when i was connecting to wifi. 2. It also did a reboot while in a middle of a game. What gives?
Sent from my SM-J700T1 using Tapatalk

The metro qc3 works nice in the T-Mobile and does not harm it any way, I did mine , no problem
Rooting is a problem with this security 3 since no TWRP is working with this version yet. But there is a eng root boot.img out which does the job, they charge 50 USD for this file.

mr64fixit said:
The metro qc3 works nice in the T-Mobile and does not harm it any way, I did mine , no problem
Rooting is a problem with this security 3 since no TWRP is working with this version yet. But there is a eng root boot.img out which does the job, they charge 50 USD for this file.
Click to expand...
Click to collapse
I have t mobile.i flashed this firmware once with flash fire, and then once with odin.lost my efs both times. I had someone send me the t mobile one and it was fine, I flashed the same twrp and it was like normal. I don't know if someone uploaded a different version of twrp or what, but the ones that have been on xda for the past 8 months do the job fine. I switch between the twrp for the j7, then the j700T specific twrp. I don't run stock, but all the roms I run with this twrp and all 3 kernels I use in development I also root through these recoveries.
@ Droid, what ROM are you running?

My Tmobile j700t qc3 had no issues when using j700t1 qc3 all was good. But twrp not working with qc3. Maybe yours was different firmware. But looking at other Samsung Tmobile and Metro pcs I never had an issue cross flashing them. Maybe you used not compatible firmware when you Lost efs , usually that happens when using lower bit or wrong modem file.
Sent from my SM-N930T using Tapatalk

mr_one said:
My Tmobile j700t qc3 had no issues when using j700t1 qc3 all was good. But twrp not working with qc3. Maybe yours was different firmware. But looking at other Samsung Tmobile and Metro pcs I never had an issue cross flashing them. Maybe you used not compatible firmware when you Lost efs , usually that happens when using lower bit or wrong modem file.
Click to expand...
Click to collapse
I used this very posts files...it's weird cuz the t mobile file is larger by a bit.maybe it is all weir

Flashing carrier CSC

I want to buy the unlocked version to use on Verizon. But I'd like things like NFL Mobile and WiFi calling to work. I think I read a while back that you could flash just the CSC to enable those on the S8 using Odin. I'm assuming it'd also be possible on the Note 8, but has it been done yet? I didn't see any threads on it, I'm guessing it's not something that can be done without dev work on it.
Sent from my SM-G935V using Tapatalk

tedkord said:
I want to buy the unlocked version to use on Verizon. But I'd like things like NFL Mobile and WiFi calling to work. I think I read a while back that you could flash just the CSC to enable those on the S8 using Odin. I'm assuming it'd also be possible on the Note 8, but has it been done yet? I didn't see any threads on it, I'm guessing it's not something that can be done without dev work on it.
Click to expand...
Click to collapse
We have been flashing complete or just USERDATA...if you flash csc with Odin only it will setup you device to be XAA, CTT, XAA..you may get functionality enabled but there are no carrier apps included, they are in AP and USERDATA... csc file can't hurt...flash away...although, the update in QI5 looks to be carrier CSC anyway for the unlocked devices...each own carrier respectively...anyways try it out...I was going to try to flash XAA BL, AP with SPR or XAS CP, CSC to see if I could get the unlocked download booster and Spring's version of settings for carrier functions...I have been sidetracked by finding a way to edit the apn settings for a better working tether...going to share a guide tomorrow

FW-8.0.0] S7 EDGE SNAPDRAGON - UNIVERSAL OREO G935UUES4CRG3 July 1/2018 sec

I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw

does wifi calling work this way or no bc its the unlocked version primarily?

Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.

Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS

vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?

rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time

vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A

rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.

vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?

rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end

vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?

@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.

vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b

@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.

rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip

vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.

The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?

Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...

Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it

Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.

Proper Odin Version for flashing firmware?

Before I start, I apologize and I know this shouldn't be in the Q&A Thread but I am a new user and unable to post it in the other thread
So I recently purchased a Galaxy S10 from Best Buy and I noticed I didn't have Advanced Call features such as Wifi-Calling and Video Calling. When I had asked about this, it turns out that I had purchased the unlocked S10 and had them set it up with my provider as Verizon.
I have been reading some posts by iBowToAndroid and I am wondering if I would be able to flash my phone into being locked with Verizon and get the Advanced Calling features without losing anything on my phone currently.
I already have the G973U firmware files from iBowToAndroid's post as well as the Verizon USERDATA file. I also tried setting up Samsung USB Drivers but the install failed. I'm not sure if this is necessary as I am still very new to this whole thing.
If this is possible, what version of Odin should I be downloading?
Is there anything else that I would need?

I'm using v3.13.3 and it's working perfectly fine.

romcio47 said:
I'm using v3.13.3 and it's working perfectly fine.
Click to expand...
Click to collapse
I've always used that same version and the patched one.
Sent from my LM-V405 using Tapatalk

romcio47 said:
I'm using v3.13.3 and it's working perfectly fine.
Click to expand...
Click to collapse
I've been trying to use that as well but it fails every time before it is able to download anything.
Not sure if I am doing something wrong but I have all the files necessary for it

CosmicNinja said:
I've been trying to use that as well but it fails every time before it is able to download anything.
Not sure if I am doing something wrong but I have all the files necessary for it
Click to expand...
Click to collapse
I had this happen as well...then got a firmware image (from sammobile) with a later date than the firmware that was on my phone already. Flashing that newer firmware image was successful the first time through. Although in my case I was flashing back from T-Mobile firmware to unlocked firmware, same idea. I think that it might have been related to needing a newer boot version or something, but until I got the later version of unlocked firmware, the flash would fail reliably at abl.elf, before it got rolling.
And the version of Odin that worked for me was the patched Odin3_v3.13.1_3B. Didn't try the unpatched version.