Hi to all,
my P9 PLUS bootloop on start after upgrade after UPDATE.APP with c432 noougat:
is bootloader unlocked, but when try to restore the rom(or another rom) its says that rom is not compatible.
I try to flash trwp, but don't works, only have the possibility to enter in fastboot mode.
There's a way to fully restored? or its possible install a mod rom?
it was originally L09c155, debranded to c432.
thanks in advance:fingers-crossed:
andrea_marcello said:
Hi to all,
my P9 PLUS bootloop on start after upgrade after UPDATE.APP with c432 noougat:
is bootloader unlocked, but when try to restore the rom(or another rom) its says that rom is not compatible.
I try to flash trwp, but don't works, only have the possibility to enter in fastboot mode.
There's a way to fully restored? or its possible install a mod rom?
it was originally L09c155, debranded to c432.
thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
Me pasa igual lei que necesitamos un archivo backup para flashear con trwp
P9 Plus is traped in a bootloop
Hey it thems we both have the same problem: My new P9 + is also traped in a bootloop and is obviously locked. Phone locked, FRP Lock.
Huawei does not want to help because I have no HuaweiID and the product ID can no longer read.
Would be nice if anybody can help me or tell me how to proceed. I have read the entire forum here, but no solution for me, because I can not write the flash without usb-debugging. What i have done:
I wanted the old version VIE-L29C636B130 update to Nougat with EMUI5.0.
I have used the firmware finder. FF worked quite well, just not to nougat, as I wanted.
I have used the update function via SD card successful to VIE-L29C636B202.
When I started the B362, this update has hung up, has not gone through and then the bootmode has been running and showing that Android can not start. Then I tried the previous version again and this didn’t work also no more to install.
Now the phone is landed in the bootloop and I can see the phone is locked. All what I can do now is start the recovery modus (Vol- and Power Button). But there is no restore version. Phone locked, FRP Lock.
Can anybody help please ? Is root or unlock modus a solution to write the flash ?
Bomit said:
Hey it thems we both have the same problem: My new P9 + is also traped in a bootloop and is obviously locked. Phone locked, FRP Lock.
Huawei does not want to help because I have no HuaweiID and the product ID can no longer read.
Would be nice if anybody can help me or tell me how to proceed. I have read the entire forum here, but no solution for me, because I can not write the flash without usb-debugging. What i have done:
I wanted the old version VIE-L29C636B130 update to Nougat with EMUI5.0.
I have used the firmware finder. FF worked quite well, just not to nougat, as I wanted.
I have used the update function via SD card successful to VIE-L29C636B202.
When I started the B362, this update has hung up, has not gone through and then the bootmode has been running and showing that Android can not start. Then I tried the previous version again and this didn’t work also no more to install.
Now the phone is landed in the bootloop and I can see the phone is locked. All what I can do now is start the recovery modus (Vol- and Power Button). But there is no restore version. Phone locked, FRP Lock.
Can anybody help please ? Is root or unlock modus a solution to write the flash ?
Click to expand...
Click to collapse
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Thank you, I thought about dc Phoenix, but i was not sure if this service is serious.
You mean my phone is bricked?
I thought about sending the phone back to Huawei. Waranty ?
Bomit said:
Thank you, I thought about dc Phoenix, but i was not sure if this service is serious.
You mean my phone is bricked?
I thought about sending the phone back to Huawei. Waranty ?
Click to expand...
Click to collapse
U have warranty if u have not unlock bootloader. If u have your warranty can be void.
Sent from my VIE-L29 using XDA Labs
use another TWRP. it should work.
Mostar088 said:
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Used to try DC-Unlocker, but themes VIE-L29 is not supported, only EVA-L29 is listet.
It´s possible to try an other version, that works ?
P9 Plus trapped in bootloop
Bomit said:
Used to try DC-Unlocker, but themes VIE-L29 is not supported, only EVA-L29 is listet.
It´s possible to try an other version, that works ?
Click to expand...
Click to collapse
Tryed DC Unlocker, its detected the phone succesfully. I can see the installed firmware, IME and so on. Unlocked the FRP - succesfully. But now i can see on the screen: FRP Lock, phone is in bootloop again. 15 credits lost.
What am i doing wrong ? What i have to do ?
Thanx a lot.
Bomit said:
Tryed DC Unlocker, its detected the phone succesfully. I can see the installed firmware, IME and so on. Unlocked the FRP - succesfully. But now i can see on the screen: FRP Lock, phone is in bootloop again. 15 credits lost.
What am i doing wrong ? What i have to do ?
Thanx a lot.
Click to expand...
Click to collapse
If u use Dc Phoenix u can flash unlimited times in 72h for 15 credits.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
If u use Dc Phoenix u can flash unlimited times in 72h for 15 credits.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
wow Was successful with this methode from DCStreamer :good::laugh::good:
https://forum.xda-developers.com/p9/help/issue-p9-rooting-brick-t3585457#post71936805
Bomit said:
wow Was successful with this methode from DCStreamer :good::laugh::good:
https://forum.xda-developers.com/p9/help/issue-p9-rooting-brick-t3585457#post71936805
Click to expand...
Click to collapse
:good:
Sent from my VIE-L29 using XDA Labs
Today they turn to me the phone: They say that there's was a problem with CPU ID(maybe..): in fact , with a software they forced a firmware on.
the phone work, but I have problem with themes(don't works)and I cannot upgrade to nougat.
This phone exit as VIE-L09C555(Brand H3G): now is
VIE-L09C432B160
when try to update to nougat by B370(21-03) it's say ne that the software is wrong.Anyone knows how I can upgrade to nougat?
Thanks in advance
Solved
andrea_marcello said:
Today they turn to me the phone: They say that there's was a problem with CPU ID(maybe..): in fact , with a software they forced a firmware on.
the phone work, but I have problem with themes(don't works)and I cannot upgrade to nougat.
This phone exit as VIE-L09C555(Brand H3G): now is
VIE-L09C432B160
when try to update to nougat by B370(21-03) it's say ne that the software is wrong.Anyone knows how I can upgrade to nougat?
Thanks in advance
Click to expand...
Click to collapse
Ok, the problem was that the root not got well.
Rooted phone, get hw EU 432
Flashed rom B103 by update menu(by secret dialer code)
Next install upadate via OTA.
Now I have rom stock rom, with B370
Thanks to all
Hello, I'm new member and i just came here for help because i don't know what to do i searched a lot. So i need recovery.img for huawei p9 EVA-L19C432B383 model number EVA-L19 android version 7.0 and EMUI 5.0 thanks for helping AND I need help with one more thing it writes that my phone is rooted but it's not when i check in root checker when i boot it then writes your phone unlocked and not trusted something like that ,but there's no root so how do i remove it or just fully root it?
It's not that your phone is rooted, that message is to let you know the bootloader is unlocked
d_mouse81 said:
It's not that your phone is rooted, that message is to let you know the bootloader is unlocked
Click to expand...
Click to collapse
How to fully root then it? And i need huawei p9 recovery.img too because i don't want to be with teamwin recovery..
For L19 I'm not sure where exactly to get a stock recovey image, but if you look around here you should be able to find one easy enough. Once you have one, boot into the bootloader, flash it, and then re-lock the bootloader
d_mouse81 said:
For L19 I'm not sure where exactly to get a stock recovey image, but if you look around here you should be able to find one easy enough. Once you have one, boot into the bootloader, flash it, and then re-lock the bootloader
Click to expand...
Click to collapse
Well as i said i was searching so long but i couldn't find one from yesterday so yea that's why i written here that someone could find it for me because i only see p8 or other recoveries that i don't know properly
Hello i have bought P9 for cheap form some guy who ( i think bricked the pohone) when you try to Turn it on the message pops out Like the Title, SO i searched online and yeah i found some guides but problem is they all need to recognize device in Usb, I cant recognize my device on Usb when i put it on Usb first it was Printer ( then i try to Delete drivers and manualy install Huawei p9 drivers but noting) now when i put it on usb i hear the sound in windows but i cant find it so i had to Device menager and i think it's ABD something. + when i hold Volume down And put usb to enter fast boot it says Phone unlocked Frp unlocked. So any help ? what shall i do?, I know i need to Wipe whole system on phone ( or something like that ) and install new one but i cant when i cant connect my phone to usb, Ps Sorry for my bad english
Cope92 said:
Hello i have bought P9 for cheap form some guy who ( i think bricked the pohone) when you try to Turn it on the message pops out Like the Title, SO i searched online and yeah i found some guides but problem is they all need to recognize device in Usb, I cant recognize my device on Usb when i put it on Usb first it was Printer ( then i try to Delete drivers and manualy install Huawei p9 drivers but noting) now when i put it on usb i hear the sound in windows but i cant find it so i had to Device menager and i think it's ABD something. + when i hold Volume down And put usb to enter fast boot it says Phone unlocked Frp unlocked. So any help ? what shall i do?, I know i need to Wipe whole system on phone ( or something like that ) and install new one but i cant when i cant connect my phone to usb, Ps Sorry for my bad english
Click to expand...
Click to collapse
Your Bootloader is unlocked - if you would ever want to hack the phone, you will need the unlocked Bootloader
And be aware that Huawei does no more provide Bootloader keys, those who want to unlock Bootloader must go for paid alternative services
zgfg said:
Your Bootloader is unlocked - if you would ever want to hack the phone, you will need the unlocked Bootloader
And be aware that Huawei does no more provide Bootloader keys, those who want to unlock Bootloader must go for paid alternative services
Click to expand...
Click to collapse
Well i think this phone bootloader is unlocked? how can i check that? Btw my phone is recognize as somehing 3650 on usb
Cope92 said:
Well i think this phone bootloader is unlocked? how can i check that? Btw my phone is recognize as somehing 3650 on usb
Click to expand...
Click to collapse
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
zgfg said:
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
Click to expand...
Click to collapse
Yeah i installed drivers for huawei p9 i typed on google Usb Drivers for Huawei p9" and i installed them then i installed HiSuite i can provide you with pictures, And yes i Press volume - and pluge usb then i go in Fastboot but i cant do anything in fastboot white screen stuck and says phone unloacked FRP unloacked ( no bootloader in any text ).. Anyway if it's unloacked is that good or bad thing? My main problems is that my pc cant recognize phone... when i pluge it in in device menager it says it's " ADB interface when u expand its Fastboot interface (google USB ID ) you have picture
zgfg said:
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
Click to expand...
Click to collapse
Here are the all pictures ( after i deleted device ADB ) now it's you have all picture something 3650. Then here is photos when you try to turn pohone on messages, and in Download and recovery i cant select my wifi or any wifi, coz when i navigate with volume up there is no select u can only navigate back to Back and exit... :/ dont know what to do.... main problem is USB i think. P.S when i pluge the phone on usb cable Hisuite turns auto on but it cant recognize my phone
Cope92 said:
Here are the all pictures ( after i deleted device ADB ) now it's you have all picture something 3650. Then here is photos when you try to turn pohone on messages, and in Download and recovery i cant select my wifi or any wifi, coz when i navigate with volume up there is no select u can only navigate back to Back and exit... :/ dont know what to do.... main problem is USB i think. P.S when i pluge the phone on usb cable Hisuite turns auto on but it cant recognize my phone
Click to expand...
Click to collapse
Few comments
1) If you connect to the particular WiFi from System, phone will remember and should automatically connect to the same from eRecovery
2) Try another USB cable, another USB port or another PC
Also, when USB cable is connected, check if phone asks you anything to confirm
If you try to connect from HiSuite, it will give you guides what 'to do'
3) Unlocked FRP causes the 'unsecure,' note at booting.
But as long as your Bootloader is unlocked, better keep also FRP unlocked (unlocked Bootloader with locked FRP makes no sense)
4) Unlocked Bootloader and FRP are not 'dangerous' - only if you go yourself and flash something wrong or wrong way
As already wrote, hackers prefer unlocked Bootloader.
Also if you anyhow brick the phone, you will need unlocked Bootloader to flash the fix.
Moreover, locking Bootloader also requires certain expertise to do it safely, so I really suggest you to keep it as that at the moment (until you solve PC connection and become familiar with ADB and so
zgfg said:
Few comments
1) If you connect to the particular WiFi from System, phone will remember and should automatically connect to the same from eRecovery
2) Try another USB cable, another USB port or another PC
Also, when USB cable is connected, check if phone asks you anything to confirm
If you try to connect from HiSuite, it will give you guides what 'to do'
3) Unlocked FRP causes the 'unsecure,' note at booting.
But as long as your Bootloader is unlocked, better keep also FRP unlocked (unlocked Bootloader with locked FRP makes no sense)
4) Unlocked Bootloader and FRP are not 'dangerous' - only if you go yourself and flash something wrong or wrong way
As already wrote, hackers prefer unlocked Bootloader.
Also if you anyhow brick the phone, you will need unlocked Bootloader to flash the fix.
Moreover, locking Bootloader also requires certain expertise to do it safely, so I really suggest you to keep it as that at the moment (until you solve PC connection and become familiar with ADB and so
Click to expand...
Click to collapse
Thanks for the replays very much . Well i played a little and i installed ADB drivers and i updated my device to Android device in device menager. I connected with power shell with ADB platrofm and I can only use Fastboot ( coz i cant enter in the system and enable debuging ) So now im downloding new rom Europe nugat one, 1.7 gb... Can i Delete System with Fastboot? and then Flash new with it? Or shall i just Dirty flash it over this one with Fastboot?. Im in fear if i delete whole system with fastboot that my phone will be totaly bricked and i cant even use Fastboot anymore?
Cope92 said:
Thanks for the replays very much . Well i played a little and i installed ADB drivers and i updated my device to Android device in device menager. I connected with power shell with ADB platrofm and I can only use Fastboot ( coz i cant enter in the system and enable debuging ) So now im downloding new rom Europe nugat one, 1.7 gb... Can i Delete System with Fastboot? and then Flash new with it? Or shall i just Dirty flash it over this one with Fastboot?. Im in fear if i delete whole system with fastboot that my phone will be totaly bricked and i cant even use Fastboot anymore?
Click to expand...
Click to collapse
What is your current Huawei stock version?
I thought you could boot to System...
From Fastboot, execute the following commands and copy/paste the answers
Code:
fastboot oem get-bootinfo
fastboot getvar vendorcountry
fastboot oem get-build-number
fastboot oem oeminforead-SYSTEM_VERSION
zgfg said:
What is your current Huawei stock version?
I thought you could boot to System...
From Fastboot, execute the following commands and copy/paste the answers
Code:
fastboot oem get-bootinfo
fastboot getvar vendorcountry
fastboot oem get-build-number
fastboot oem oeminforead-SYSTEM_VERSION
Click to expand...
Click to collapse
Here it is picture down. Well no i cant enter system or anything only fastboot with ADB, well i bought this phone used cheep 40 euros guy told me he bricked him and dont know to fix except that everything works ( i hope so ) now i need to unbrick phone i did it on s3 neo long time ago with huawei is harder :s
I have the same problem with my Huawei p9. It was unlocked by oneclickroot, with magisk 18. I'm not bothered about the unlocked bootloader or from, as the phone is rooted and works well. I just want to get rid of the warning and time delay, when I turn the phone on. Does anyone know what files need to be deleted to get rid of it and if possible the time delay, which I suppose is only about 10 seconds ,but very annoying.
Cope92 said:
Here it is picture down. Well no i cant enter system or anything only fastboot with ADB, well i bought this phone used cheep 40 euros guy told me he bricked him and dont know to fix except that everything works ( i hope so ) now i need to unbrick phone i did it on s3 neo long time ago with huawei is harder :s
Click to expand...
Click to collapse
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
Nokieran said:
I have the same problem with my Huawei p9. It was unlocked by oneclickroot, with magisk 18. I'm not bothered about the unlocked bootloader or from, as the phone is rooted and works well. I just want to get rid of the warning and time delay, when I turn the phone on. Does anyone know what files need to be deleted to get rid of it and if possible the time delay, which I suppose is only about 10 seconds ,but very annoying.
Click to expand...
Click to collapse
Guys, iif you don't like that warning - then never unlock Bootloader and never do rooting, etc
You can only get rid of that warning by relocking your Bootloader (it will lock also FRP).
BUT, re-locking Bootloader triggers Hard Reset - with Hard Reset you would loose Magisk, root , etc
EVEN WORSE, Hard Resetting with the root, may brick the phone
Do you really want all that?
If you don't like this warning at boot, you should have stayed with locked Bootloader and with stock firmware, without rooting, etc
This thing has been anwered/discussed elswhere and zillion times (hence IMO, people need to read, get informed and think in advance, and those who are so iritated with this warning note at boot must not go in modding the phone)
zgfg said:
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
My friend i wont be home whole day, i will be later at 17h pm. Im from Serbia That is small country in Europe. If i update all that you said? will my network work (sim card) i can picture you sim card i have 1 space for sim card and 1 for memory or that is hybrid? down in picture i have combination of eva L09 sim card slot
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
My friend i wont be home whole day, i will be later at 17h pm. Im from Serbia That is small country in Europe. If i update all that you said? will my network work (sim card) i can picture you sim card i have 1 space for sim card and 1 for memory or that is hybrid? down in picture i have combination of eva L09 sim card slot
Click to expand...
Click to collapse
No problem, after upgrading to Nougat everything will work
Im pretty sure that if you buy Huawei (if they still sell P9) from your mobile provider, it will for sure come with Nougat
Btw, there is something strange with that c900 cust, if you dig to old XDA posts, you will see that c900 was popular few years ago, people thought it was kind of "generic' intermational cust and many rebranded to c900 from regional custs - but later rebranded back (usually to c432 European or some other like Mediterranean or Latin America ) because all other custs were upgraded to Nougat except that c900. Not sure if Huawei was ever selling phones with c900, or it was only used for the phones bought in China (cheaper) and rebranded then for international market (all languages, getting rid of Chinese bloatware)
Nevertheless, don't worry and escape from c900. IBtw, it is even possible to rebrand and upgrade from Lx9 to AL10c00 Chinese Oreo (it comes with ALL languages), and to get it fully working (but some patches must be applied) - eg, I'm writing from my P9 with such Chinese Oreo (and rooted by Magisk)
Regarding to L09/L19 trays - yes, they are as on your pictures. You can put L19 tray into L09 and vice versa but on L09 you cannot (I was trying by rebranding L09 to L19) make it work to recognize that second SIM (from the hybrid slot)
So it seems that differences between L09 and L19 are not only in software but also in hardware (and not only in the tray) - L09 has NFC and L19 does not have, people tried also rebranding L19 to L09 but still they could not switch the NFC on
That is, for those who don't use two SIMs neither NFC - they can rebrand from L09 to L19 or vice versa and everything will work fine, with no 'visible' differences in the firmware
PS: You see now why unlocking Bootloader, rebranding, rooting, etc - all require to have Bootloader and FRP unlocked
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
No problem, after upgrading to Nougat everything will work
Im pretty sure that if you buy Huawei (if they still sell P9) from your mobile provider, it will for sure come with Nougat
Btw, there is something strange with that c900 cust, if you dig to old XDA posts, you will see that c900 was popular few years ago, people thought it was kind of "generic' intermational cust and many rebranded to c900 from regional custs - but later rebranded back (usually to c432 European or some other like Mediterranean or Latin America ) because all other custs were upgraded to Nougat except that c900. Not sure if Huawei was ever selling phones with c900, or it was only used for the phones bought in China (cheaper) and rebranded then for international market (all languages, getting rid of Chinese bloatware)
Nevertheless, don't worry and escape from c900. IBtw, it is even possible to rebrand and upgrade from Lx9 to AL10c00 Chinese Oreo (it comes with ALL languages), and to get it fully working (but some patches must be applied) - eg, I'm writing from my P9 with such Chinese Oreo (and rooted by Magisk)
Regarding to L09/L19 trays - yes, they are as on your pictures. You can put L19 tray into L09 and vice versa but on L09 you cannot (I was trying by rebranding L09 to L19) make it work to recognize that second SIM (from the hybrid slot)
So it seems that differences between L09 and L19 are not only in software but also in hardware (and not only in the tray) - L09 has NFC and L19 does not have, people tried also rebranding L19 to L09 but still they could not switch the NFC on
That is, for those who don't use two SIMs neither NFC - they can rebrand from L09 to L19 or vice versa and everything will work fine, with no 'visible' differences in the firmware
PS: You see now why unlocking Bootloader, rebranding, rooting, etc - all require to have Bootloader and FRP unlocked
Click to expand...
Click to collapse
So u wanna say i bought fake huawei p9 i dont understand? Im starting first part to do then next so i will tell you what have i done ( im interested in oreo one but first i wanna try to unbrick this system ), P.S in the first guide you give me i cant extract anything on SD card sinc i cant use anything exept ADB fastboot?
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
So u wanna say i bought fake huawei p9 i dont understand? Im starting first part to do then next so i will tell you what have i done ( im interested in oreo one but first i wanna try to unbrick this system ), P.S in the first guide you give me i cant extract anything on SD card sinc i cant use anything exept ADB fastboot?
Click to expand...
Click to collapse
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there wad also c900b182 but seems that Huawei didn't even push OTA update to that)
And I said that by the procedure, if your bricked phone will allow, you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or they didn't know/didn't want trying on their own:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there is also c900b182 but seems that Huawei didn't even push OTA update to that
And I said that by the procedure, if your bricked phone will allow), you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or the didn't know/didn't want trying on their own
Click to expand...
Click to collapse
Oh well where can i find c900b182 ? what do i need to do? i need to find c900b182 rom and download it and Install it with Power and Vol + - combo ? and then i need to do Like you said Guide 1 and then guide 2 ?
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there wad also c900b182 but seems that Huawei didn't even push OTA update to that)
And I said that by the procedure, if your bricked phone will allow, you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or they didn't know/didn't want trying on their own:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
Im sorry but from all the guides etc.. im confused what to do.. :/ I can only Use ADB fastboot and from guide 1 Power + volume - Volume combo but i cant extract rom to Dload folder so i assume that option dosent work...... So if you know option from Fastboot that i can use or anything i can do you can write the guide sinc im rly confused right now :/... Well Dc Unlocker 15 euros ( no problem if i cant do anything ) but i wanna try this is challenge and fun for me i just dont know from where to start :S and im in fear can i brick the device even more haha
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
Im sorry but from all the guides etc.. im confused what to do.. :/ I can only Use ADB fastboot and from guide 1 Power + volume - Volume combo but i cant extract rom to Dload folder so i assume that option dosent work...... So if you know option from Fastboot that i can use or anything i can do you can write the guide sinc im rly confused right now :/... Well Dc Unlocker 15 euros ( no problem if i cant do anything ) but i wanna try this is challenge and fun for me i just dont know from where to start :S and im in fear can i brick the device even more haha
Click to expand...
Click to collapse
In post #12, part (i) there is a link to guide that installs c900b300 (sorry, not c900b182)
Again, I said that you prepare DLOAD content on the extetnal SD card by pulling it out of the phone and putting to some adapter and to PC or to another Android device
I wish you good luck. If you don't want or can't do as instructed, maybe better you go for DC Unlixker, you pay them and they have to provide you service, answers, etc
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
In post #12, part (i) there is a link to guide that installs c900b300 (sorry, not c900b182)
Again, I said that you prepare DLOAD content on the extetnal SD card by pulling it out of the phone and putting to some adapter and to PC or to another Android device
I wish you good luck. If you don't want or can't do as instructed, maybe better you go for DC Unlixker, you pay them and they have to provide you service, answers, etc
Click to expand...
Click to collapse
Oh okay i will try it thanks a lot
Click to expand...
Click to collapse